component
FM5011HBD4E
Public Made by Adomby adom
Shenzhen Fuman Battery Management, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
FM5011HBD4E
Shenzhen Fuman · Battery Management · ESOP-8
FM5011HBD4E from Shenzhen Fuman, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin with a recommended supply of 4.5 to 5.5 V and an absolute maximum range of -0.3 to 6 V. |
| 2 | DL0 | output | Charge-status LED drive pin (DGRE/DRED charge indicator) with port voltage limited to -0.3 to 5 V. |
| 3 | DL1 | output | Discharge-status and battery-level LED drive pin (D1 indicator) with port voltage limited to -0.3 to 5 V. |
| 4 | DL2 | output | Discharge-status and battery-level LED drive pin (D2/D3 indicator) with port voltage limited to -0.3 to 5 V. |
| 5 | BAT | bidirectional | Battery positive terminal that supplies about 600 mA to the battery during charging, with voltage limited to -0.3 to 5 V; keep the trace to the battery sufficiently wide. |
| 6 | WTP | input | Push-button input whose floating voltage is 0.8 V in standby and 1.6 V in the working state. |
| 7 | SW | bidirectional | Inductor drive pin connected to the power MOS drain, with voltage limited to -0.3 to 15 V. |
| 8 | OUT | power_out | Boost output pin supplying the fan load from the power P-MOS source, with voltage limited to -0.3 to 15 V and no voltage difference to be applied between OUT and SW when the chip is unpowered. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Fuman |
| Package | ESOP-8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage, absolute maximum (VIN) | VIN | -0.3 | 6 | V | 3 | ||
| Output pin voltage, absolute maximum (VOUT) | VOUT | -0.3 | 15 | V | 3 | ||
| Switch pin voltage, absolute maximum (VSW) | VSW | -0.3 | 15 | V | 3 | ||
| Battery pin voltage, absolute maximum (VBAT) | VBAT | -0.3 | 5 | V | 3 | ||
| DL0/1/2 port voltage, absolute maximum (VLED) | VLED | -0.3 | 5 | V | DL0/1/2 端口电压 | 3 | |
| Operating temperature range (TOP) | TOP | -40 | 85 | ℃ | 工作温度范围 | 3 | |
| Operating junction temperature range (TJ) | TJ | -40 | 125 | ℃ | 工作结温范围 | 3 | |
| Storage temperature (TST) | TST | -55 | 150 | ℃ | 储存温度 | 3 | |
| Storage humidity (MST) | MST | 30 | % | 储存湿度, printed as <30% | 3 | ||
| Lead soldering temperature (TLEAD) | TLEAD | 300 | ℃ | 引脚焊接温度(10 sec) | 3 | ||
| Recommended input voltage (VIN) | VIN | 4.5 | 5.5 | V | VIN 推荐输入电压 | 3 | |
| Recommended operating ambient temperature (TOP) | TOP | 0 | 50 | ℃ | 推荐工作环境温度 | 3 | |
| Float voltage accuracy over full temperature range | -1 | 1 | % | 全温度范围 (charge float voltage) | 1 | ||
| Boost DC-DC output accuracy | -3 | 3 | % | 1 | |||
| Battery float (regulation) threshold VBAT-REG, default | VBAT-REG | 4.16 | 4.2 | 4.24 | V | 芯片默认 | 5 |
| Battery float (regulation) threshold VBAT-REG, internal programmed | VBAT-REG | 4.31 | 4.35 | 4.39 | V | 内部烧写设置 | 5 |
| Output overload protection time (TOCP-OFF) | TOCP-OFF | 24 | 28 | 32 | mS | 输出过载保护时间 | 6 |
| Standby delay after boost shutdown (TP-OFF) | TP-OFF | 384 | 448 | 512 | mS | 关闭升压系统后进入待机状态的延时时间 | 6 |
| Chip operating current in charge state (ICC-CHG) | ICC-CHG | 1 | mA | VIN =5V 充电状态; single printed value, column not explicit | 5 | ||
| Power supply UVLO rising threshold (VUVLO-RS) | VUVLO-RS | 4.55 | V | VIN从低到高; single printed value, column not explicit | 5 | ||
| Power supply UVLO falling threshold (VUVLO-DN) | VUVLO-DN | 3.5 | V | VIN从高到低; single printed value, column not explicit | 5 | ||
| Input constant charge current IVIN-CHG, default | IVIN-CHG | 600 | mA | 芯片默认 VIN=5V | 5 | ||
| Input constant charge current IVIN-CHG, internal programmed | IVIN-CHG | 800 | mA | 内部烧写设置 VIN=5V | 5 | ||
| Trickle charge current ITRKL, default | ITRKL | 60 | mA | 芯片默认 VIN=5V | 5 | ||
| Trickle charge current ITRKL, internal programmed | ITRKL | 80 | mA | 内部烧写设置 VIN=5V | 5 | ||
| Charge termination current threshold (IFULL) | IFULL | 80 | mA | VIN=5.0V | 5 | ||
| Trickle-to-constant-current threshold (VTRKL) | VTRKL | 3 | V | VBAT 从低到高 | 5 | ||
| Trickle-to-constant-current hysteresis voltage | VTRKL | 0.3 | V | 迟滞电压 VBAT 从高到低; value-to-row mapping inferred from printed order | 5 | ||
| Recharge threshold VRECHG, VBAT rising | VRECHG | 4.025 | V | VBAT rising | 5 | ||
| Recharge threshold VRECHG, VBAT falling | VRECHG | 3.955 | V | VBAT falling | 5 | ||
| Input overvoltage protection threshold (VIN-OVP) | VIN-OVP | 6 | V | 输入电压升高 | 5 | ||
| Input overvoltage protection hysteresis | VIN-OVP | 0.4 | V | 迟滞电压 输入电压降低 | 5 | ||
| Standby current (IQ) | IQ | 30 | uA | VBAT=4.2V | 6 | ||
| No-load output voltage gear 1 (5/7/9V option) | VOUT-NL | 5.2 | V | IOUT=0; 烧写选择 5/7/9V 输出电压, 一档 | 6 | ||
| No-load output voltage gear 2 (5/7/9V option) | VOUT-NL | 7.2 | V | IOUT=0; 烧写选择 5/7/9V 输出电压, 二档 | 6 | ||
| No-load output voltage gear 3 (5/7/9V option) | VOUT-NL | 9.1 | V | IOUT=0; 烧写选择 5/7/9V 输出电压, 三档 | 6 | ||
| No-load output voltage gear 1 (4/5/6V option) | VOUT-NL | 4.7 | V | IOUT=0; 烧写选择 4/5/6V 输出电压, 一档 | 6 | ||
| No-load output voltage gear 2 (4/5/6V option) | VOUT-NL | 5.5 | V | IOUT=0; 烧写选择 4/5/6V 输出电压, 二档 | 6 | ||
| No-load output voltage gear 3 (4/5/6V option) | VOUT-NL | 6.5 | V | IOUT=0; 烧写选择 4/5/6V 输出电压, 三档 | 6 | ||
| Output overload protection voltage (VLOAD-OCP) | VLOAD-OCP | 3.9 | V | 输出过载保护电压 | 6 | ||
| Output short-circuit protection time (TSTP-OFF) | TSTP-OFF | 32 | uS | 输出短路保护时间 | 6 | ||
| Output short-circuit recovery time (TSTP-DLY) | TSTP-DLY | 1 | S | 输出短路保护恢复时间 | 6 | ||
| Boost no-load minimum start voltage (VBSTL) | VBSTL | 3.12 | V | 升压空载启动最低电压 | 6 | ||
| Switching frequency (fSW) | fSW | 750 | KHz | 开关工作频率 | 6 | ||
| Discharge shutdown voltage (VBST-UVLO) | VBST-UVLO | 2.75 | V | 放电时关机电压 | 6 | ||
| Low-battery indication voltage (VLED-LQWB) | VLED-LQWB | 3.38 | V | 放电电量低提示电压 | 6 | ||
| Low-battery LED flash frequency (FLED-LQWB) | FLED-LQWB | 2 | Hz | 放电低电量灯指示闪烁频率 | 6 | ||
| WTP pin floating voltage, standby | VWTP | 0.8 | V | WTP 端口悬空电压 待机状态 | 6 | ||
| WTP pin floating voltage, working | VWTP | 1.6 | V | WTP 端口悬空电压 工作状态 | 6 | ||
| Thermal foldback temperature (TEMPOTL) | TEMPOTL | 100 | ℃ | 限温保护温度 | 6 | ||
| Overtemperature protection temperature (TEMPOTP) | TEMPOTP | 125 | ℃ | 过温保护温度 | 6 |
CAD (KiCad official)
- Symbol:
FM5011HBD4E - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
fm5011hbd4e-etched.step/fm5011hbd4e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm5011hbd4e.step/fm5011hbd4e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen Fuman datasheet (10 pp, sha256
012d307a765795c6, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FM5011HBD4E
**Shenzhen Fuman** · Battery Management · ESOP-8
FM5011HBD4E from Shenzhen Fuman, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin with a recommended supply of 4.5 to 5.5 V and an absolute maximum range of -0.3 to 6 V. |
| 2 | DL0 | output | Charge-status LED drive pin (DGRE/DRED charge indicator) with port voltage limited to -0.3 to 5 V. |
| 3 | DL1 | output | Discharge-status and battery-level LED drive pin (D1 indicator) with port voltage limited to -0.3 to 5 V. |
| 4 | DL2 | output | Discharge-status and battery-level LED drive pin (D2/D3 indicator) with port voltage limited to -0.3 to 5 V. |
| 5 | BAT | bidirectional | Battery positive terminal that supplies about 600 mA to the battery during charging, with voltage limited to -0.3 to 5 V; keep the trace to the battery sufficiently wide. |
| 6 | WTP | input | Push-button input whose floating voltage is 0.8 V in standby and 1.6 V in the working state. |
| 7 | SW | bidirectional | Inductor drive pin connected to the power MOS drain, with voltage limited to -0.3 to 15 V. |
| 8 | OUT | power_out | Boost output pin supplying the fan load from the power P-MOS source, with voltage limited to -0.3 to 15 V and no voltage difference to be applied between OUT and SW when the chip is unpowered. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Fuman |
| Package | ESOP-8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage, absolute maximum (VIN) | VIN | -0.3 | | 6 | V | | 3 |
| Output pin voltage, absolute maximum (VOUT) | VOUT | -0.3 | | 15 | V | | 3 |
| Switch pin voltage, absolute maximum (VSW) | VSW | -0.3 | | 15 | V | | 3 |
| Battery pin voltage, absolute maximum (VBAT) | VBAT | -0.3 | | 5 | V | | 3 |
| DL0/1/2 port voltage, absolute maximum (VLED) | VLED | -0.3 | | 5 | V | DL0/1/2 端口电压 | 3 |
| Operating temperature range (TOP) | TOP | -40 | | 85 | ℃ | 工作温度范围 | 3 |
| Operating junction temperature range (TJ) | TJ | -40 | | 125 | ℃ | 工作结温范围 | 3 |
| Storage temperature (TST) | TST | -55 | | 150 | ℃ | 储存温度 | 3 |
| Storage humidity (MST) | MST | | | 30 | % | 储存湿度, printed as <30% | 3 |
| Lead soldering temperature (TLEAD) | TLEAD | | | 300 | ℃ | 引脚焊接温度(10 sec) | 3 |
| Recommended input voltage (VIN) | VIN | 4.5 | | 5.5 | V | VIN 推荐输入电压 | 3 |
| Recommended operating ambient temperature (TOP) | TOP | 0 | | 50 | ℃ | 推荐工作环境温度 | 3 |
| Float voltage accuracy over full temperature range | | -1 | | 1 | % | 全温度范围 (charge float voltage) | 1 |
| Boost DC-DC output accuracy | | -3 | | 3 | % | | 1 |
| Battery float (regulation) threshold VBAT-REG, default | VBAT-REG | 4.16 | 4.2 | 4.24 | V | 芯片默认 | 5 |
| Battery float (regulation) threshold VBAT-REG, internal programmed | VBAT-REG | 4.31 | 4.35 | 4.39 | V | 内部烧写设置 | 5 |
| Output overload protection time (TOCP-OFF) | TOCP-OFF | 24 | 28 | 32 | mS | 输出过载保护时间 | 6 |
| Standby delay after boost shutdown (TP-OFF) | TP-OFF | 384 | 448 | 512 | mS | 关闭升压系统后进入待机状态的延时时间 | 6 |
| Chip operating current in charge state (ICC-CHG) | ICC-CHG | | 1 | | mA | VIN =5V 充电状态; single printed value, column not explicit | 5 |
| Power supply UVLO rising threshold (VUVLO-RS) | VUVLO-RS | | 4.55 | | V | VIN从低到高; single printed value, column not explicit | 5 |
| Power supply UVLO falling threshold (VUVLO-DN) | VUVLO-DN | | 3.5 | | V | VIN从高到低; single printed value, column not explicit | 5 |
| Input constant charge current IVIN-CHG, default | IVIN-CHG | | 600 | | mA | 芯片默认 VIN=5V | 5 |
| Input constant charge current IVIN-CHG, internal programmed | IVIN-CHG | | 800 | | mA | 内部烧写设置 VIN=5V | 5 |
| Trickle charge current ITRKL, default | ITRKL | | 60 | | mA | 芯片默认 VIN=5V | 5 |
| Trickle charge current ITRKL, internal programmed | ITRKL | | 80 | | mA | 内部烧写设置 VIN=5V | 5 |
| Charge termination current threshold (IFULL) | IFULL | | 80 | | mA | VIN=5.0V | 5 |
| Trickle-to-constant-current threshold (VTRKL) | VTRKL | | 3 | | V | VBAT 从低到高 | 5 |
| Trickle-to-constant-current hysteresis voltage | VTRKL | | 0.3 | | V | 迟滞电压 VBAT 从高到低; value-to-row mapping inferred from printed order | 5 |
| Recharge threshold VRECHG, VBAT rising | VRECHG | | 4.025 | | V | VBAT rising | 5 |
| Recharge threshold VRECHG, VBAT falling | VRECHG | | 3.955 | | V | VBAT falling | 5 |
| Input overvoltage protection threshold (VIN-OVP) | VIN-OVP | | 6 | | V | 输入电压升高 | 5 |
| Input overvoltage protection hysteresis | VIN-OVP | | 0.4 | | V | 迟滞电压 输入电压降低 | 5 |
| Standby current (IQ) | IQ | | 30 | | uA | VBAT=4.2V | 6 |
| No-load output voltage gear 1 (5/7/9V option) | VOUT-NL | | 5.2 | | V | IOUT=0; 烧写选择 5/7/9V 输出电压, 一档 | 6 |
| No-load output voltage gear 2 (5/7/9V option) | VOUT-NL | | 7.2 | | V | IOUT=0; 烧写选择 5/7/9V 输出电压, 二档 | 6 |
| No-load output voltage gear 3 (5/7/9V option) | VOUT-NL | | 9.1 | | V | IOUT=0; 烧写选择 5/7/9V 输出电压, 三档 | 6 |
| No-load output voltage gear 1 (4/5/6V option) | VOUT-NL | | 4.7 | | V | IOUT=0; 烧写选择 4/5/6V 输出电压, 一档 | 6 |
| No-load output voltage gear 2 (4/5/6V option) | VOUT-NL | | 5.5 | | V | IOUT=0; 烧写选择 4/5/6V 输出电压, 二档 | 6 |
| No-load output voltage gear 3 (4/5/6V option) | VOUT-NL | | 6.5 | | V | IOUT=0; 烧写选择 4/5/6V 输出电压, 三档 | 6 |
| Output overload protection voltage (VLOAD-OCP) | VLOAD-OCP | | 3.9 | | V | 输出过载保护电压 | 6 |
| Output short-circuit protection time (TSTP-OFF) | TSTP-OFF | | 32 | | uS | 输出短路保护时间 | 6 |
| Output short-circuit recovery time (TSTP-DLY) | TSTP-DLY | | 1 | | S | 输出短路保护恢复时间 | 6 |
| Boost no-load minimum start voltage (VBSTL) | VBSTL | | 3.12 | | V | 升压空载启动最低电压 | 6 |
| Switching frequency (fSW) | fSW | | 750 | | KHz | 开关工作频率 | 6 |
| Discharge shutdown voltage (VBST-UVLO) | VBST-UVLO | | 2.75 | | V | 放电时关机电压 | 6 |
| Low-battery indication voltage (VLED-LQWB) | VLED-LQWB | | 3.38 | | V | 放电电量低提示电压 | 6 |
| Low-battery LED flash frequency (FLED-LQWB) | FLED-LQWB | | 2 | | Hz | 放电低电量灯指示闪烁频率 | 6 |
| WTP pin floating voltage, standby | VWTP | | 0.8 | | V | WTP 端口悬空电压 待机状态 | 6 |
| WTP pin floating voltage, working | VWTP | | 1.6 | | V | WTP 端口悬空电压 工作状态 | 6 |
| Thermal foldback temperature (TEMPOTL) | TEMPOTL | | 100 | | ℃ | 限温保护温度 | 6 |
| Overtemperature protection temperature (TEMPOTP) | TEMPOTP | | 125 | | ℃ | 过温保护温度 | 6 |
## CAD (KiCad official)
- Symbol: `FM5011HBD4E`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`
- 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files: `fm5011hbd4e-etched.step` / `fm5011hbd4e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fm5011hbd4e.step` / `fm5011hbd4e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shenzhen Fuman datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589835422299033600) (10 pp, sha256 `012d307a765795c6`, retrieved 2026-10-19, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fm5011hbd4e-datasheet.pdf)