component
FM33LG045A
Public Made by Adomby adom
FUDAN MICRO Microcontroller Units (MCUs/MPUs/SOCs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
3929649
FM33LG045A
FUDAN MICRO · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
FM33LG045A from FUDAN MICRO, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA15 | bidirectional | GPIO,复用为外部唤醒引脚 WKUP0、外部电源检测 SVS 及比较器 3 输出 COMP3_OUT。 |
| 2 | PA0 | bidirectional | GPIO,复用为 LCD COM0、UART4_RX、ADC_IN5、LUT3_OUT 等功能。 |
| 3 | PA1 | bidirectional | GPIO,复用为 LCD COM1、UART4_TX、ADC_IN12、LUT2_OUT 等功能。 |
| 4 | PA2 | bidirectional | GPIO,复用为 LCD COM2、UART0_RX、LPUART0_RX 等功能。 |
| 5 | PA3 | bidirectional | GPIO,复用为 LCD COM3、UART0_TX、LPUART0_TX 等功能。 |
| 6 | PA4 | bidirectional | GPIO,复用为 LCD COM4/SEG28、GPT1_CH3 及比较器 2 反相输入 COMP2_INN1。 |
| 7 | PA5 | bidirectional | GPIO,复用为 LCD COM5/SEG29、GPT1_CH4 及比较器 2 反相输入 COMP2_INN2。 |
| 8 | PA6 | bidirectional | GPIO,复用为 LCD COM6/SEG30、OPA1 反相输入 OPA1_INN2 及 CAN 接收 CAN_RX。 |
| 9 | PA7 | bidirectional | GPIO,复用为 LCD COM7/SEG31、OPA1 同相输入 OPA1_INP2 及 CAN 发送 CAN_TX。 |
| 10 | PA8 | bidirectional | GPIO,复用为 LCD SEG0、LPT32_CH1、SPI1 片选 SPI1_SSN 及比较器 2 同相输入 COMP2_INP1。 |
| 11 | PA9 | bidirectional | GPIO,复用为 LCD SEG1、LPT32_CH2、SPI1 时钟 SPI1_SCK 及比较器 2 同相输入 COMP2_INP2。 |
| 12 | PA11 | bidirectional | GPIO,复用为 LCD SEG32、I2C 时钟 SCL 及 LPUART2 接收 LPUART2_RX。 |
| 13 | PA12 | bidirectional | GPIO,复用为 LCD SEG33、I2C 数据 SDA 及 LPUART2 发送 LPUART2_TX。 |
| 14 | PB2 | bidirectional | GPIO,复用为外部唤醒引脚 WKUP2、LCD 电容引脚 VCIN1、UART4_RX 及高级定时器通道 ATIM_CH1N。 |
| 15 | PB3 | bidirectional | GPIO,复用为 LCD 电容引脚 VCIN2、UART4_TX 及高级定时器通道 ATIM_CH2N。 |
| 16 | PB4 | bidirectional | GPIO,复用为 LCD SEG3、ATIM_CH1、LPUART2_RX 及比较器 3 反相输入 COMP3_INN1。 |
| 17 | PB5 | bidirectional | GPIO,复用为 LCD SEG4、ATIM_CH2、LPUART2_TX 及比较器 3 反相输入 COMP3_INN2。 |
| 18 | PB6 | bidirectional | GPIO,复用为 LCD SEG5、ATIM_CH3、SPI2 片选 SPI2_SSN,SOC 功能见引脚名。 |
| 19 | PB7 | bidirectional | GPIO,复用为 LCD SEG6、ATIM_CH4、SPI2 时钟 SPI2_SCK 及原厂测试通道 ANATST。 |
| 20 | PB8 | bidirectional | GPIO,复用为 LCD SEG7、SPI0 片选 SPI0_SSN、ATIM_CH3N 及比较器 1 同相输入 COMP1_INP1。 |
| 21 | PB9 | bidirectional | GPIO,复用为 LCD SEG8、SPI0 时钟 SPI0_SCK、GPT0_ETR 及比较器 1 同相输入 COMP1_INP2。 |
| 22 | PB10 | bidirectional | GPIO,复用为 LCD SEG9、OPA1 反相输入 OPA1_INN1、SPI0_MISO 及 GPT0_CH1。 |
| 23 | PB11 | bidirectional | GPIO,复用为 LCD SEG10、OPA1 同相输入 OPA1_INP1、SPI0_MOSI 及 GPT0_CH2。 |
| 24 | PB12 | bidirectional | GPIO,复用为外部唤醒引脚 WKUP3、FOUT1 时钟输出、ATIM_ETR 及 OPA1 输出 OPA1_OUT1。 |
| 25 | PC0 | bidirectional | GPIO,复用为 LCD 片外电容 VDISP2、比较器 3 同相输入 COMP3_INP1、LUT0_OUT 及 GPT1_CH1。 |
| 26 | PC1 | bidirectional | GPIO,复用为 LCD 片外电容 VDISP3、比较器 3 同相输入 COMP3_INP2、LUT1_OUT 及 GPT1_CH2。 |
| 27 | PC2 | bidirectional | GPIO,复用为高频晶振输入 XTHIN、UART1_RX 及 LPUART1_RX。 |
| 28 | PC3 | bidirectional | GPIO,复用为高频晶振输出 XTHOUT、UART1_TX 及 LPUART1_TX。 |
| 29 | PC4 | bidirectional | GPIO,复用为 LCD SEG13、OPA1 输出 OPA1_OUT2、比较器 1 输出 COMP1_OUT 及 UART5_RX。 |
| 30 | PC5 | bidirectional | GPIO,复用为 LCD SEG14、DAC 输出 DAC_OUT、比较器 2 输出 COMP2_OUT 及 UART5_TX。 |
| 31 | PC6 | bidirectional | GPIO,复用为外部唤醒引脚 WKUP4、LCD SEG15、GPT1_ETR 及比较器 1 反相输入 COMP1_INN2。 |
| 32 | PC7 | bidirectional | GPIO,复用为 LCD SEG16、SPI2 片选 SPI2_SSN 及 ADC 输入通道 ADC_IN6。 |
| 33 | PC8 | bidirectional | GPIO,复用为 LCD SEG17、SPI2 时钟 SPI2_SCK 及 ADC 输入通道 ADC_IN13。 |
| 34 | PC9 | bidirectional | GPIO,复用为 LCD SEG18、SPI2 数据线 SPI2_MISO 及 ADC 输入通道 ADC_IN14。 |
| 35 | PC10 | bidirectional | GPIO,复用为外部唤醒引脚 WKUP5、LCD SEG19、SPI2 数据线 SPI2_MOSI 及 ADC 输入通道 ADC_IN15。 |
| 36 | XT32KO | passive | 32768Hz 晶振输出脚。 |
| 37 | XT32KI | passive | 32768Hz 晶振输入脚。 |
| 38 | VDD15 | power_out | LDO 输出,外接 100nF 电容到地。 |
| 39 | VSS | power_in | 地。 |
| 40 | VDD | power_in | 电源,典型工作电压范围 1.65 |
| 41 | VREFP | power_out | 基准源,ADC 基准电压 VREFP-VREFN 绝对最大值为 6.5V。 |
| 42 | VBAT | power_in | 备份电源,使用电源切换功能时工作电压范围为 1.5~4.2V。 |
| 43 | PD11 | bidirectional | GPIO,复用为外部唤醒引脚 WKUP6、FOUT0 时钟输出、ATIM_BRK1 刹车输入及 ADC 输入通道 ADC_IN0。 |
| 44 | PD0 | bidirectional | GPIO,复用为 LCD SEG22、UART5_RX、GPT2_CH1 及 ADC 输入通道 ADC_IN7。 |
| 45 | PD1 | bidirectional | GPIO,复用为 LCD SEG23、UART5_TX、GPT2_CH2 及 ADC 输入通道 ADC_IN1。 |
| 46 | PD7 | bidirectional | GPIO,复用为 UART3_RX 及 SWD 接口时钟 SWCLK。 |
| 47 | PD8 | bidirectional | GPIO,复用为 UART3_TX 及 SWD 接口数据 SWIO。 |
| 48 | NRST | input | 复位引脚,NRST 输入低电平时的 VIL 为 0~0.3VDD,内部上拉电阻 RPU 为 5 KΩ。 |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FUDAN MICRO |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压(包含 VDD、VDDA) | VDD-VSS | -0.3 | 6.5 | V | 61 | ||
| 管脚电压 | VPIN | 6.5 | V | 61 | |||
| ADC 基准电压 | VREFP-VREFN | -0.3 | 6.5 | 61 | |||
| 所有地引脚之间的压差 | /△VSS/ | 50 | mV | 61 | |||
| 工作温度 | TA | -40 | 105 | ℃ | 符合 AEC-Q100 grade2 | 61 | |
| 存储温度 | TSTG | -55 | 150 | ℃ | 61 | ||
| ESD HBM(PC5 DAC_OUT) | HBM | -2000 | 2000 | V | TA=25℃, JEDEC JS-001, PC5(DAC_OUT) | 61 | |
| ESD HBM(其他引脚) | HBM | -4000 | 4000 | V | TA=25℃, JEDEC JS-001, All others | 61 | |
| ESD CDM | CDM | -1000 | 1000 | V | TA=25℃, JEDEC JS-002 | 61 | |
| IO Latchup | LU | -210 | 210 | mA | -(0.5VDD) < VI < (1.5VDD), TA=25℃, JESD78E | 61 | |
| 向芯片 VDD 流入的最大电流 (source) | ∑IVDD | 120 | mA | (source) | 61 | ||
| 从芯片 VSS 流出的最大电流 (sink) | ∑IVSS | 100 | mA | (sink) | 61 | ||
| 所有 IO sink 的最大总和电流 | ∑IIO | 100 | mA | (sink) | 61 | ||
| 所有 IO source 的最大总和电流 | ∑IIO | 120 | mA | (source) | 61 | ||
| AHB 时钟频率 | fHCLK | 0 | 64 | MHz | TA=-40~105C | 62 | |
| APB 时钟频率 | fPCLK | 0 | 64 | MHz | TA=-40~105C | 62 | |
| 典型工作电压范围 | VDD | 1.65 | 5.5 | V | TA=-40~105C | 62 | |
| 备份电源工作电压范围(不使用电源切换功能,应与 VDD 短接) | VBAT | 1.5 | 5.5 | V | 不使用电源切换功能,应与VDD短接 | 62 | |
| 备份电源工作电压范围(使用电源切换功能,VBAT 单独供电) | VBAT | 1.5 | 4.2 | V | 使用电源切换功能,VBAT 单独供电 | 62 | |
| 结温 | TJ | -40 | 125 | °C | 62 |
CAD (KiCad official)
- Symbol:
FM33LG045A - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
fm33lg045a-etched.step/fm33lg045a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm33lg045a.step/fm33lg045a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FUDAN MICRO datasheet (100 pp, sha256
bfd0cc3c1ded70af, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FM33LG045A
**FUDAN MICRO** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
FM33LG045A from FUDAN MICRO, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA15 | bidirectional | GPIO,复用为外部唤醒引脚 WKUP0、外部电源检测 SVS 及比较器 3 输出 COMP3_OUT。 |
| 2 | PA0 | bidirectional | GPIO,复用为 LCD COM0、UART4_RX、ADC_IN5、LUT3_OUT 等功能。 |
| 3 | PA1 | bidirectional | GPIO,复用为 LCD COM1、UART4_TX、ADC_IN12、LUT2_OUT 等功能。 |
| 4 | PA2 | bidirectional | GPIO,复用为 LCD COM2、UART0_RX、LPUART0_RX 等功能。 |
| 5 | PA3 | bidirectional | GPIO,复用为 LCD COM3、UART0_TX、LPUART0_TX 等功能。 |
| 6 | PA4 | bidirectional | GPIO,复用为 LCD COM4/SEG28、GPT1_CH3 及比较器 2 反相输入 COMP2_INN1。 |
| 7 | PA5 | bidirectional | GPIO,复用为 LCD COM5/SEG29、GPT1_CH4 及比较器 2 反相输入 COMP2_INN2。 |
| 8 | PA6 | bidirectional | GPIO,复用为 LCD COM6/SEG30、OPA1 反相输入 OPA1_INN2 及 CAN 接收 CAN_RX。 |
| 9 | PA7 | bidirectional | GPIO,复用为 LCD COM7/SEG31、OPA1 同相输入 OPA1_INP2 及 CAN 发送 CAN_TX。 |
| 10 | PA8 | bidirectional | GPIO,复用为 LCD SEG0、LPT32_CH1、SPI1 片选 SPI1_SSN 及比较器 2 同相输入 COMP2_INP1。 |
| 11 | PA9 | bidirectional | GPIO,复用为 LCD SEG1、LPT32_CH2、SPI1 时钟 SPI1_SCK 及比较器 2 同相输入 COMP2_INP2。 |
| 12 | PA11 | bidirectional | GPIO,复用为 LCD SEG32、I2C 时钟 SCL 及 LPUART2 接收 LPUART2_RX。 |
| 13 | PA12 | bidirectional | GPIO,复用为 LCD SEG33、I2C 数据 SDA 及 LPUART2 发送 LPUART2_TX。 |
| 14 | PB2 | bidirectional | GPIO,复用为外部唤醒引脚 WKUP2、LCD 电容引脚 VCIN1、UART4_RX 及高级定时器通道 ATIM_CH1N。 |
| 15 | PB3 | bidirectional | GPIO,复用为 LCD 电容引脚 VCIN2、UART4_TX 及高级定时器通道 ATIM_CH2N。 |
| 16 | PB4 | bidirectional | GPIO,复用为 LCD SEG3、ATIM_CH1、LPUART2_RX 及比较器 3 反相输入 COMP3_INN1。 |
| 17 | PB5 | bidirectional | GPIO,复用为 LCD SEG4、ATIM_CH2、LPUART2_TX 及比较器 3 反相输入 COMP3_INN2。 |
| 18 | PB6 | bidirectional | GPIO,复用为 LCD SEG5、ATIM_CH3、SPI2 片选 SPI2_SSN,SOC 功能见引脚名。 |
| 19 | PB7 | bidirectional | GPIO,复用为 LCD SEG6、ATIM_CH4、SPI2 时钟 SPI2_SCK 及原厂测试通道 ANATST。 |
| 20 | PB8 | bidirectional | GPIO,复用为 LCD SEG7、SPI0 片选 SPI0_SSN、ATIM_CH3N 及比较器 1 同相输入 COMP1_INP1。 |
| 21 | PB9 | bidirectional | GPIO,复用为 LCD SEG8、SPI0 时钟 SPI0_SCK、GPT0_ETR 及比较器 1 同相输入 COMP1_INP2。 |
| 22 | PB10 | bidirectional | GPIO,复用为 LCD SEG9、OPA1 反相输入 OPA1_INN1、SPI0_MISO 及 GPT0_CH1。 |
| 23 | PB11 | bidirectional | GPIO,复用为 LCD SEG10、OPA1 同相输入 OPA1_INP1、SPI0_MOSI 及 GPT0_CH2。 |
| 24 | PB12 | bidirectional | GPIO,复用为外部唤醒引脚 WKUP3、FOUT1 时钟输出、ATIM_ETR 及 OPA1 输出 OPA1_OUT1。 |
| 25 | PC0 | bidirectional | GPIO,复用为 LCD 片外电容 VDISP2、比较器 3 同相输入 COMP3_INP1、LUT0_OUT 及 GPT1_CH1。 |
| 26 | PC1 | bidirectional | GPIO,复用为 LCD 片外电容 VDISP3、比较器 3 同相输入 COMP3_INP2、LUT1_OUT 及 GPT1_CH2。 |
| 27 | PC2 | bidirectional | GPIO,复用为高频晶振输入 XTHIN、UART1_RX 及 LPUART1_RX。 |
| 28 | PC3 | bidirectional | GPIO,复用为高频晶振输出 XTHOUT、UART1_TX 及 LPUART1_TX。 |
| 29 | PC4 | bidirectional | GPIO,复用为 LCD SEG13、OPA1 输出 OPA1_OUT2、比较器 1 输出 COMP1_OUT 及 UART5_RX。 |
| 30 | PC5 | bidirectional | GPIO,复用为 LCD SEG14、DAC 输出 DAC_OUT、比较器 2 输出 COMP2_OUT 及 UART5_TX。 |
| 31 | PC6 | bidirectional | GPIO,复用为外部唤醒引脚 WKUP4、LCD SEG15、GPT1_ETR 及比较器 1 反相输入 COMP1_INN2。 |
| 32 | PC7 | bidirectional | GPIO,复用为 LCD SEG16、SPI2 片选 SPI2_SSN 及 ADC 输入通道 ADC_IN6。 |
| 33 | PC8 | bidirectional | GPIO,复用为 LCD SEG17、SPI2 时钟 SPI2_SCK 及 ADC 输入通道 ADC_IN13。 |
| 34 | PC9 | bidirectional | GPIO,复用为 LCD SEG18、SPI2 数据线 SPI2_MISO 及 ADC 输入通道 ADC_IN14。 |
| 35 | PC10 | bidirectional | GPIO,复用为外部唤醒引脚 WKUP5、LCD SEG19、SPI2 数据线 SPI2_MOSI 及 ADC 输入通道 ADC_IN15。 |
| 36 | XT32KO | passive | 32768Hz 晶振输出脚。 |
| 37 | XT32KI | passive | 32768Hz 晶振输入脚。 |
| 38 | VDD15 | power_out | LDO 输出,外接 100nF 电容到地。 |
| 39 | VSS | power_in | 地。 |
| 40 | VDD | power_in | 电源,典型工作电压范围 1.65~5.5V,绝对最大电源电压 -0.3~6.5V。 |
| 41 | VREFP | power_out | 基准源,ADC 基准电压 VREFP-VREFN 绝对最大值为 6.5V。 |
| 42 | VBAT | power_in | 备份电源,使用电源切换功能时工作电压范围为 1.5~4.2V。 |
| 43 | PD11 | bidirectional | GPIO,复用为外部唤醒引脚 WKUP6、FOUT0 时钟输出、ATIM_BRK1 刹车输入及 ADC 输入通道 ADC_IN0。 |
| 44 | PD0 | bidirectional | GPIO,复用为 LCD SEG22、UART5_RX、GPT2_CH1 及 ADC 输入通道 ADC_IN7。 |
| 45 | PD1 | bidirectional | GPIO,复用为 LCD SEG23、UART5_TX、GPT2_CH2 及 ADC 输入通道 ADC_IN1。 |
| 46 | PD7 | bidirectional | GPIO,复用为 UART3_RX 及 SWD 接口时钟 SWCLK。 |
| 47 | PD8 | bidirectional | GPIO,复用为 UART3_TX 及 SWD 接口数据 SWIO。 |
| 48 | NRST | input | 复位引脚,NRST 输入低电平时的 VIL 为 0~0.3VDD,内部上拉电阻 RPU 为 5 KΩ。 |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FUDAN MICRO |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压(包含 VDD、VDDA) | VDD-VSS | -0.3 | | 6.5 | V | | 61 |
| 管脚电压 | VPIN | | | 6.5 | V | | 61 |
| ADC 基准电压 | VREFP-VREFN | -0.3 | | 6.5 | | | 61 |
| 所有地引脚之间的压差 | /△VSS/ | | | 50 | mV | | 61 |
| 工作温度 | TA | -40 | | 105 | ℃ | 符合 AEC-Q100 grade2 | 61 |
| 存储温度 | TSTG | -55 | | 150 | ℃ | | 61 |
| ESD HBM(PC5 DAC_OUT) | HBM | -2000 | | 2000 | V | TA=25℃, JEDEC JS-001, PC5(DAC_OUT) | 61 |
| ESD HBM(其他引脚) | HBM | -4000 | | 4000 | V | TA=25℃, JEDEC JS-001, All others | 61 |
| ESD CDM | CDM | -1000 | | 1000 | V | TA=25℃, JEDEC JS-002 | 61 |
| IO Latchup | LU | -210 | | 210 | mA | -(0.5VDD) < VI < (1.5VDD), TA=25℃, JESD78E | 61 |
| 向芯片 VDD 流入的最大电流 (source) | ∑IVDD | | | 120 | mA | (source) | 61 |
| 从芯片 VSS 流出的最大电流 (sink) | ∑IVSS | | | 100 | mA | (sink) | 61 |
| 所有 IO sink 的最大总和电流 | ∑IIO | | | 100 | mA | (sink) | 61 |
| 所有 IO source 的最大总和电流 | ∑IIO | | | 120 | mA | (source) | 61 |
| AHB 时钟频率 | fHCLK | 0 | | 64 | MHz | TA=-40~105C | 62 |
| APB 时钟频率 | fPCLK | 0 | | 64 | MHz | TA=-40~105C | 62 |
| 典型工作电压范围 | VDD | 1.65 | | 5.5 | V | TA=-40~105C | 62 |
| 备份电源工作电压范围(不使用电源切换功能,应与 VDD 短接) | VBAT | 1.5 | | 5.5 | V | 不使用电源切换功能,应与VDD短接 | 62 |
| 备份电源工作电压范围(使用电源切换功能,VBAT 单独供电) | VBAT | 1.5 | | 4.2 | V | 使用电源切换功能,VBAT 单独供电 | 62 |
| 结温 | TJ | -40 | | 125 | °C | | 62 |
## CAD (KiCad official)
- Symbol: `FM33LG045A`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `fm33lg045a-etched.step` / `fm33lg045a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fm33lg045a.step` / `fm33lg045a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [FUDAN MICRO datasheet](docs/fm33lg045a-datasheet.pdf) (100 pp, sha256 `bfd0cc3c1ded70af`, retrieved 2026-10-28, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fm33lg045a-datasheet.pdf)