main
History Download
Ray Publish 0.1.0 d9c20ac

FM33LG026A

FUDAN MICRO · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)

FM33LG026A from FUDAN MICRO, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NRST input Chip reset pin; its pull-up and filter parameters are given in Table 3-26 (page 88).
2 PA13 bidirectional GPIO with alternate functions UART0_RX, LPUART0_RX (low-power UART receive) and ADC_IN4 (ADC input channel).
3 PA14 bidirectional GPIO with alternate functions UART0_TX, LPUART0_TX (low-power UART transmit) and ADC_IN11 (ADC input channel).
4 PA15 bidirectional GPIO with alternate functions WKUP0 (external wake-up pin), SVS (external supply voltage detection) and COMP3_OUT (comparator output).
5 PA0 bidirectional GPIO with alternate functions COM0 (LCD common), UART4_RX, ADC_IN5 and LUT3_OUT (PGL output).
6 PA1 bidirectional GPIO with alternate functions COM1 (LCD common), UART4_TX, ADC_IN12 and LUT2_OUT (PGL output).
7 PA2 bidirectional GPIO with alternate functions COM2 (LCD common), UART0_RX and LPUART0_RX.
8 PA3 bidirectional GPIO with alternate functions COM3 (LCD common), UART0_TX and LPUART0_TX.
9 PA4 bidirectional GPIO with alternate functions COM4/SEG28 (LCD), GPT1_CH3 (general-timer channel) and COMP2_INN1 (comparator input).
10 PA5 bidirectional GPIO with alternate functions COM5/SEG29 (LCD), GPT1_CH4 (general-timer channel) and COMP2_INN2 (comparator input).
11 PA6 bidirectional GPIO with alternate functions COM6/SEG30 (LCD), OPA1_INN2 (OPA input) and CAN_RX (CAN receive).
12 PA7 bidirectional GPIO with alternate functions COM7/SEG31 (LCD), OPA1_INP2 (OPA input) and CAN_TX (CAN transmit).
13 PA8 bidirectional GPIO with alternate functions SEG0 (LCD), LPT32_CH1 (low-power timer channel), SPI1_SSN (SPI chip select) and COMP2_INP1 (comparator input).
14 PA9 bidirectional GPIO with alternate functions SEG1 (LCD), LPT32_CH2 (low-power timer channel), SPI1_SCK (SPI clock) and COMP2_INP2 (comparator input).
15 PA10 bidirectional GPIO with alternate functions WKUP1 (external wake-up pin), SEG2 (LCD), LPT32_ETR (low-power timer external trigger) and COMP1_INN1 (comparator input).
16 PA11 bidirectional GPIO with alternate functions SEG32 (LCD), SCL (I2C clock) and LPUART2_RX (low-power UART receive).
17 PA12 bidirectional GPIO with alternate functions SEG33 (LCD), SDA (I2C data) and LPUART2_TX (low-power UART transmit).
18 PB0 bidirectional GPIO with alternate functions SEG34 (LCD), UART3_RX, SPI1_MISO and OPA1_OUT3 (OPA output).
19 PB1 bidirectional GPIO with alternate functions SEG35 (LCD), UART3_TX, SPI1_MOSI and OPA1_OUT4 (OPA output); Table 2-1 labels this row as an external wake-up pin, see review_required.
20 PB2 bidirectional GPIO with alternate functions WKUP2 (external wake-up pin), VCIN1 (LCD capacitor pin in capacitor-drive mode), UART4_RX and ATIM_CH1N (advanced-timer channel).
21 PB3 bidirectional GPIO with alternate functions VCIN2 (LCD capacitor pin in capacitor-drive mode), UART4_TX and ATIM_CH2N (advanced-timer channel).
22 PB4 bidirectional GPIO with alternate functions SEG3 (LCD), ATIM_CH1 (advanced-timer channel), LPUART2_RX and COMP3_INN1 (comparator input).
23 PB5 bidirectional GPIO with alternate functions SEG4 (LCD), ATIM_CH2 (advanced-timer channel), LPUART2_TX and COMP3_INN2 (comparator input).
24 PB6 bidirectional GPIO with alternate functions SEG5 (LCD), ATIM_CH3 (advanced-timer channel) and SPI2_SSN (SPI chip select).
25 PB7 bidirectional GPIO with alternate functions SEG6 (LCD), ATIM_CH4 (advanced-timer channel), SPI2_SCK (SPI clock) and ANATST (factory analog test channel).
26 PB8 bidirectional GPIO with alternate functions SEG7 (LCD), SPI0_SSN (SPI chip select), ATIM_CH3N (advanced-timer channel) and COMP1_INP1 (comparator input).
27 PB9 bidirectional GPIO with alternate functions SEG8 (LCD), SPI0_SCK (SPI clock), GPT0_ETR (general-timer external trigger) and COMP1_INP2 (comparator input).
28 PB10 bidirectional GPIO with alternate functions SEG9 (LCD), OPA1_INN1 (OPA input), SPI0_MISO (SPI data) and GPT0_CH1 (general-timer channel).
29 PB11 bidirectional GPIO with alternate functions SEG10 (LCD), OPA1_INP1 (OPA input), SPI1_MOSI (SPI data) and GPT0_CH2 (general-timer channel).
30 PB12 bidirectional GPIO with alternate functions WKUP3 (external wake-up pin), FOUT1 (clock frequency output), ATIM_ETR (advanced-timer external trigger) and OPA1_OUT1 (OPA output).
31 PB13 bidirectional GPIO with alternate functions SEG11 (LCD), UART1_RX and LPUART1_RX (low-power UART receive).
32 PB14 bidirectional GPIO with alternate functions SEG12 (LCD), UART1_TX and LPUART1_TX (low-power UART transmit).
33 PD12 bidirectional GPIO with alternate functions VDISP1 (external LCD capacitor in capacitor-drive mode), SDA (I2C data) and SPI2_MOSI (SPI data).
34 PC0 bidirectional GPIO with alternate functions VDISP2 (external LCD capacitor), COMP3_INP1 (comparator input), LUT0_OUT (PGL output) and GPT1_CH1 (general-timer channel).
35 PC1 bidirectional GPIO with alternate functions VDISP3 (external LCD capacitor), COMP3_INP2 (comparator input), LUT1_OUT (PGL output) and GPT1_CH2 (general-timer channel).
36 PC2 bidirectional GPIO with alternate functions XTHIN (high-frequency crystal input), UART1_RX and LPUART1_RX (low-power UART receive).
37 PC3 bidirectional GPIO with alternate functions XTHOUT (high-frequency crystal output), UART1_TX and LPUART1_TX (low-power UART transmit).
38 PC4 bidirectional GPIO with alternate functions SEG13 (LCD), OPA1_OUT2 (OPA output), COMP1_OUT (comparator output) and UART5_RX.
39 PC5 bidirectional GPIO with alternate functions SEG14 (LCD), DAC_OUT (DAC output), COMP2_OUT (comparator output) and UART5_TX.
40 PC6 bidirectional GPIO with alternate functions WKUP4 (external wake-up pin), SEG15 (LCD), GPT1_ETR (general-timer external trigger) and COMP1_INN2 (comparator input).
41 PC7 bidirectional GPIO with alternate functions SEG16 (LCD), SPI2_SSN (SPI chip select) and ADC_IN6 (ADC input channel).
42 PC8 bidirectional GPIO with alternate functions SEG17 (LCD), SPI2_SCK (SPI clock) and ADC_IN13 (ADC input channel).
43 PC9 bidirectional GPIO with alternate functions SEG18 (LCD), SPI2_MISO (SPI data) and ADC_IN14 (ADC input channel).
44 PC10 bidirectional GPIO with alternate functions WKUP5 (external wake-up pin), SEG19 (LCD), SPI2_MOSI (SPI data) and ADC_IN15 (ADC input channel).
45 PC11 bidirectional GPIO with alternate functions SEG20 (LCD), U7816CLK (ISO7816 clock), GPT0_CH3 (general-timer channel) and ADC_IN16 (ADC input channel).
46 PC12 bidirectional GPIO with alternate functions SEG21 (LCD), U7816IO (ISO7816 data, 10K pull-up as stated in Table 2-1), GPT0_CH4 (general-timer channel) and ADC_IN17 (ADC input channel).
47 PH15 bidirectional GPIO with alternate functions RTCOUT (RTCB output signal) and Tamper (tamper-detection signal input).
48 XT32KO passive Output pin of the 32768 Hz crystal oscillator.
49 XT32KI passive Input pin of the 32768 Hz crystal oscillator.
50 VDD15 power_out Output of the internal LDO; an external 100 nF capacitor to ground is required.
51 VSS power_in Ground pin; the datasheet limits the voltage difference between all ground pins to 50 mV (
52 VDD power_in Main supply pin with a typical operating range of 1.65 to 5.5 V (Table 3-2).
53 VREFP passive Reference source pin used as the ADC reference (see section 38.6.2, Using VREFP as reference).
54 VBAT power_in Backup supply pin: 1.5 to 5.5 V when tied to VDD without power switching, or 1.5 to 4.2 V when powered separately with power switching enabled (Table 3-2).
55 PD11 bidirectional GPIO with alternate functions WKUP6 (external wake-up pin), FOUT0 (clock frequency output), ATIM_BRK1 (advanced-timer brake input) and ADC_IN0 (ADC input channel).
56 PD0 bidirectional GPIO with alternate functions SEG22 (LCD), UART5_RX, GPT2_CH1 (general-timer channel) and ADC_IN7 (ADC input channel).
57 PD1 bidirectional GPIO with alternate functions SEG23 (LCD), UART5_TX, GPT2_CH2 (general-timer channel) and ADC_IN1 (ADC input channel).
58 PD2 bidirectional GPIO with alternate functions SEG24 (LCD), SPI1_SSN (SPI chip select), GPT2_CH3 (general-timer channel) and ADC_IN8 (ADC input channel).
59 PD3 bidirectional GPIO with alternate functions SEG25 (LCD), SPI1_SCK (SPI clock), GPT2_CH4 (general-timer channel) and ADC_IN2 (ADC input channel).
60 PD4 bidirectional GPIO with alternate functions SEG26 (LCD), SPI1_MISO (SPI data), GPT2_ETR (general-timer external trigger) and ADC_IN9 (ADC input channel).
61 PD5 bidirectional GPIO with alternate functions SEG27 (LCD), SPI1_MOSI (SPI data), LPT16_ETR (LPTIM16 external trigger) and ADC_IN3 (ADC input channel).
62 PD6 bidirectional GPIO with alternate functions WKUP7 (external wake-up pin), ANATST (analog test channel), ATIM_BRK2 (advanced-timer brake input) and ADC_IN10 (ADC input channel).
63 PD7 bidirectional GPIO with alternate functions UART3_RX (UART receive) and SWCLK (SWD clock).
64 PD8 bidirectional GPIO with alternate functions UART3_TX (UART transmit) and SWIO (SWD data).

Key specifications

Parameter Value
Manufacturer FUDAN MICRO
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (includes VDD, VDDA) VDD-VSS -0.3 6.5 V 61
Pin voltage VPIN 6.5 V 61
ADC reference voltage VREFP-VREFN -0.3 6.5 V 61
Voltage difference between all ground pins /ΔVSS/ 50 mV 61
Operating temperature TA -40 105 ℃ 符合 AEC-Q100 grade2 61
Storage temperature TSTG -55 150 ℃ 61
ESD HBM, pin PC5 (DAC_OUT) HBM -2000 2000 V TA=25℃, JEDEC JS-001 61
ESD HBM, all other pins HBM -4000 4000 V TA=25℃, JEDEC JS-001 61
ESD CDM CDM -1000 1000 V TA=25℃, JEDEC JS-002 61
IO latch-up LU -210 210 mA -(0.5VDD) < VI < (1.5VDD), TA=25℃, JESD78E 61
Maximum total current into VDD (source) ∑IVDD 120 mA 61
Maximum total current out of VSS (sink) ∑IVSS 100 mA 61
Maximum total sink current of all IO ∑IIO 100 mA all IO sink 61
Maximum total source current of all IO ∑IIO 120 mA all IO source 61
AHB clock frequency fHCLK 0 64 MHz TA=-40~105C 62
APB clock frequency fPCLK 0 64 MHz TA=-40~105C 62
Typical operating supply voltage range VDD 1.65 5.5 V TA=-40~105C 62
Backup supply voltage range, power switch not used (VBAT shorted to VDD) VBAT 1.5 5.5 V 不使用电源切换功能,应与 VDD 短接 62
Backup supply voltage range, power switch used (VBAT powered separately) VBAT 1.5 4.2 V 使用电源切换功能,VBAT 单独供电 62
Junction temperature TJ -40 125 °C 62
Run mode current, CoreMark from Flash IDDRUN 1.36 1.65 mA fAHB=8MHz (RCHF), PLL off, Flash 0 wait, TA=25℃ 62
Run mode current, CoreMark from Flash IDDRUN 1.4 1.7 mA fAHB=8MHz (RCHF), PLL off, Flash 0 wait, TA=105℃ 62
Run mode current, CoreMark from Flash IDDRUN 2.4 mA fAHB=16MHz (RCHF), PLL off, Flash 0 wait, TA=25℃ 62
Run mode current, CoreMark from Flash IDDRUN 2.5 mA fAHB=16MHz (RCHF), PLL off, Flash 0 wait, TA=105℃ 62
Run mode current, CoreMark from Flash IDDRUN 3.15 3.5 mA fAHB=24MHz (RCHF), PLL off, Flash 0 wait, TA=25℃ 62
Run mode current, CoreMark from Flash IDDRUN 3.12 3.6 mA fAHB=24MHz (RCHF), PLL off, Flash 0 wait, TA=105℃ 62
Run mode current, CoreMark from Flash IDDRUN 5.66 6 mA fAHB=64MHz, PLL on, Flash 1 wait, TA=25℃ 62
Run mode current, CoreMark from Flash IDDRUN 6.2 mA fAHB=64MHz, PLL on, Flash 1 wait, TA=105℃ 62
Run mode current, CoreMark from Flash IDDRUN 150 uA fAHB=614KHz (RCLF), PLL off, Flash 0 wait, TA=25℃ 62
Run mode current, CoreMark from Flash IDDRUN 200 uA fAHB=614KHz (RCLF), PLL off, Flash 0 wait, TA=105℃ 62

CAD (KiCad official)

  • Symbol: FM33LG026A
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: fm33lg026a-etched.step / fm33lg026a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fm33lg026a.step / fm33lg026a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FUDAN MICRO datasheet (100 pp, sha256 bfd0cc3c1ded70af, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF