main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs fm25w256-gtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers fm25w256-gtr: viewers · Ray
fm25w256-gtr-etched.fit.json fm25w256-gtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
fm25w256-gtr-etched.glb fm25w256-gtr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
fm25w256-gtr-etched.step fm25w256-gtr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
fm25w256-gtr.glb Publish 0.1.0 · Ray
fm25w256-gtr.kicad_mod Publish 0.1.0 · Ray
fm25w256-gtr.kicad_sym Publish 0.1.0 · Ray
fm25w256-gtr.lbr Publish 0.1.0 · Ray
fm25w256-gtr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json fm25w256-gtr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
README.md fm25w256-gtr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

FM25W256-GTR

Infineon · FRAM · SOIC-8-150mil

FM25W256-GTR from Infineon, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS input Chip Select (active LOW). When HIGH the device enters low-power standby, ignores inputs, and tristates the output. When LOW, the internal SCK is activated; a falling edge on CS must precede every opcode.
2 SO output Serial Output (MISO). Data output pin, driven during a read and tristated at all other times including when HOLD is LOW. Data transitions on the falling edge of SCK.
3 WP input Write Protect (active LOW). Prevents writes to the Status Register when WPEN=1, enabling hardware write protection. Tie to VDD if not used.
4 VSS power_in Ground reference for the device. Must be connected to system ground.
5 SI input Serial Input (MOSI). All data is input on this pin, sampled on the rising edge of SCK. Must always be driven to a valid logic level to meet IDD specifications.
6 SCK input Serial Clock. All I/O activity is synchronized to SCK. Inputs are latched on the rising edge, outputs change on the falling edge. May run at any frequency from 0 to 20 MHz and may be interrupted at any time.
7 HOLD input HOLD (active LOW). Suspends the current memory operation while asserted so the host CPU can service another task. Transitions must occur while SCK is LOW. Tie to VDD if not used.
8 VDD power_in Power supply input, 2.7 V to 5.5 V. Typical standby current 15 uA; active current 250 uA at 1 MHz.

Key specifications

Parameter Value
Manufacturer Infineon
Package SOIC-8-150mil
Category Memory
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • FM25W256-GTRG
  • FM25W256-GTR

CAD (KiCad official)

  • Symbol: FM25W256-GTR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8-150mil (KiCad packages3D, STEP)
  • 3D model files: fm25w256-gtr-etched.step / fm25w256-gtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fm25w256-gtr.step / fm25w256-gtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon datasheet (20 pp, sha256 e0456be117be9ad1, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF