component
FM25V01A-G
Public Made by Adomby adom
SPANSION FRAM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
FM25V01A-G
SPANSION · FRAM · SOIC-8
FM25V01A-G from SPANSION, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Active LOW chip select; when HIGH the device enters low-power standby, ignores other inputs and tristates SO, and a falling edge on CS must occur before every opcode. |
| 2 | SO | output | Serial data output driven on the falling edge of SCK during a read and kept tristated at all other times, including when HOLD is LOW. |
| 3 | WP | input | Active LOW write protect that blocks writes to the Status Register when WPEN is set to 1, and must be tied to VDD if not used. |
| 4 | VSS | power_in | Ground for the device, which must be connected to the system ground. |
| 5 | SI | input | Serial data input sampled on the rising edge of SCK and ignored at other times, which should always be driven to a valid logic level to meet IDD specifications. |
| 6 | SCK | input | Serial clock with inputs latched on the rising edge and outputs driven on the falling edge, operating at any frequency from 0 to 40 MHz and interruptible at any time. |
| 7 | HOLD | input | When LOW, suspends the current operation and causes the device to ignore SCK and CS transitions; all HOLD transitions must occur while SCK is LOW, and the pin has a weak internal pull-up. |
| 8 | VDD | power_in | Power supply input to the device, specified for 2.0 V to 3.6 V operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SPANSION |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply (VDD) | VDD | 2 | 3.3 | 3.6 | V | 13 | |
| Ambient temperature, industrial range | TA | -40 | 85 | °C | Industrial operating range | 13 | |
| VDD supply current | IDD | 2.5 | mA | fSCK = 40 MHz; SCK toggling, SO = Open | 13 | ||
| VDD supply current | IDD | 0.22 | mA | fSCK = 1 MHz; SCK toggling, SO = Open | 13 | ||
| VDD standby current | ISB | 90 | 150 | µA | CS = VDD. All other inputs VSS or VDD. | 13 | |
| Sleep mode current | IZZ | 8 | µA | CS = VDD. All other inputs VSS or VDD. | 13 | ||
| Input leakage current (except HOLD) | ILI | -1 | 1 | µA | VSS < VIN < VDD | 13 | |
| Input leakage current (for HOLD) | ILI | -100 | 1 | µA | 13 | ||
| Output leakage current | ILO | -1 | 1 | µA | VSS < VOUT < VDD | 13 | |
| Input LOW voltage | VIL | -0.3 | V | 13 | |||
| Output HIGH voltage | VOH1 | 2.4 | V | IOH = -1 mA, VDD = 2.7 V | 13 | ||
| Output LOW voltage | VOL1 | 0.4 | V | IOL = 2 mA, VDD = 2.7 V | 13 | ||
| Output LOW voltage | VOL2 | 0.2 | V | IOL = 150 µA | 13 | ||
| Input resistance (HOLD) | Rin | 800 | kΩ | For VIN = VIL(max) | 13 | ||
| Input resistance (HOLD) | Rin | 30 | kΩ | For VIN = VIH(min) | 13 | ||
| Data retention | TDR | 10 | Years | TA = 85 °C | 14 | ||
| Data retention | TDR | 38 | Years | TA = 75 °C | 14 | ||
| Data retention | TDR | 151 | Years | TA = 65 °C | 14 | ||
| Endurance | NVC | 1014 | cycles | Over operating temperature | 14 | ||
| Output pin capacitance (SO) | CO | 8 | pF | TA = 25 °C, f = 1 MHz, VDD = VDD(typ) | 14 | ||
| Input pin capacitance | CI | 6 | pF | 14 | |||
| Thermal resistance, junction to ambient (8-pin SOIC) | θJA | 146 | °C/W | Per EIA/JESD51 | 14 | ||
| Thermal resistance, junction to case (8-pin SOIC) | θJC | 48 | °C/W | 14 | |||
| Supply voltage on VDD relative to VSS | VDD | -1 | 4.5 | V | 13 | ||
| Input voltage | VIN | -1 | 4.5 | V | VIN < VDD + 1.0 V | 13 | |
| Storage temperature | TSTG | -55 | 125 | °C | 13 | ||
| Ambient temperature with power applied | TA | -55 | 125 | °C | 13 | ||
| DC voltage applied to outputs in HI-Z state | VO | -0.5 | V | 13 | |||
| Transient voltage on any pin to ground | VTRANS | -2 | V | Transient < 20 ns | 13 | ||
| Package power dissipation capability | PD | 1 | W | TA = 25 °C | 13 | ||
| DC output current | IOUT | 15 | mA | 1 output at a time, 1-s duration | 13 | ||
| Electrostatic discharge voltage, Human Body Model | VESD | 2 | kV | JEDEC Std JESD22-A114-B | 13 | ||
| Electrostatic discharge voltage, Charged Device Model | VESD | 500 | V | JEDEC Std JESD22-C101-A | 13 | ||
| Latch-up current | ILU | 140 | mA | Printed as > 140 mA | 13 | ||
| Surface mount lead soldering temperature | TSOL | 260 | °C | 3 seconds | 13 | ||
| Power-up VDD(min) to first access (CS LOW) | tPU | 250 | µs | 17 | |||
| Last access (CS HIGH) to power-down (VDD(min)) | tPD | 0 | µs | 17 | |||
| VDD power-up ramp rate | tVR | 50 | µs/V | 17 | |||
| VDD power-down ramp rate | tVF | 100 | µs/V | 17 | |||
| Recovery time from sleep mode | tREC | 400 | µs | 17 | |||
| SCK clock frequency | fSCK | 0 | 25 | MHz | VDD = 2.0 V to 3.6 V | 15 | |
| Clock HIGH time | tCH | 18 | ns | VDD = 2.0 V to 3.6 V | 15 | ||
| Clock LOW time | tCL | 18 | ns | VDD = 2.0 V to 3.6 V | 15 | ||
| Chip select setup | tCSU | 12 | ns | VDD = 2.0 V to 3.6 V | 15 | ||
| Chip select hold | tCSH | 12 | ns | VDD = 2.0 V to 3.6 V | 15 | ||
| Output disable time | tOD | 20 | ns | VDD = 2.0 V to 3.6 V; load 5 pF | 15 | ||
| Output data valid time | tODV | 16 | ns | VDD = 2.0 V to 3.6 V | 15 | ||
| Output hold time | tOH | 0 | ns | VDD = 2.0 V to 3.6 V | 15 | ||
| Deselect time | tD | 60 | ns | VDD = 2.0 V to 3.6 V | 15 | ||
| Data in rise time | tR | 50 | ns | VDD = 2.0 V to 3.6 V; 10% to 90% | 15 | ||
| Data in fall time | tF | 50 | ns | VDD = 2.0 V to 3.6 V; 10% to 90% | 15 | ||
| Data setup time | tSU | 8 | ns | VDD = 2.0 V to 3.6 V | 15 | ||
| Data hold time | tH | 8 | ns | VDD = 2.0 V to 3.6 V | 15 | ||
| HOLD setup time | tHS | 12 | ns | VDD = 2.0 V to 3.6 V | 15 | ||
| HOLD hold time | tHH | 12 | ns | VDD = 2.0 V to 3.6 V | 15 | ||
| HOLD LOW to output HI-Z | tHZ | 25 | ns | VDD = 2.0 V to 3.6 V; load 5 pF | 15 | ||
| HOLD HIGH to data active | tLZ | 25 | ns | VDD = 2.0 V to 3.6 V | 15 |
CAD (KiCad official)
- Symbol:
FM25V01A-G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
fm25v01a-g-etched.step/fm25v01a-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm25v01a-g.step/fm25v01a-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SPANSION datasheet (21 pp, sha256
12e1548ea7a310ef, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).