component
FM25Q64AI3-SOB-T-G
Public Made by Adomby adom
FUDAN MICRO NOR FLASH, SOP-8-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
5b3bd12
FM25Q64AI3-SOB-T-G
FUDAN MICRO · NOR FLASH · SOP-8-208mil
FM25Q64AI3-SOB-T-G from FUDAN MICRO, in a SOP-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select Input: when CS# is high the device is deselected and DO/DQ outputs are high impedance; CS# must be pulled up in standby and must track VCC at power-up. |
| 2 | DO(DQ1) | bidirectional | Data Output (Data Input Output 1): serial data output for standard SPI, and DQ1 for Dual/Quad SPI; used for Dual SPI instructions. |
| 3 | WP#(DQ2) | bidirectional | Write Protect Input (Data Input Output 2): active-low pin that prevents writing to the Status Registers; becomes DQ2 for Quad SPI when the QE bit is set, and its write-protect function is then unavailable. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | DI(DQ0) | bidirectional | Data Input (Data Input Output 0): serial data input for standard SPI, and DQ0 for Dual/Quad SPI instructions. |
| 6 | CLK | input | Serial Clock Input: provides the timing for serial input and output operations. |
| 7 | HOLD#(DQ3) | bidirectional | Hold Input (Data Input Output 3): active-low pin that pauses device operation while CS# is low; becomes DQ3 for Quad SPI when the QE bit is set, and its hold function is then unavailable. |
| 8 | VCC | power_in | Power supply, 2.7V to 3.6V single voltage supply per the datasheet features. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FUDAN MICRO |
| Package | SOP-8-208mil |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
FM25Q64AI3-SOB-T-G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8-208mil (KiCad packages3D, STEP)
- 3D model files:
fm25q64ai3-sob-t-g-etched.step/fm25q64ai3-sob-t-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm25q64ai3-sob-t-g.step/fm25q64ai3-sob-t-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FUDAN MICRO datasheet (67 pp, sha256
9e006feed7443128, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FM25Q64AI3-SOB-T-G
**FUDAN MICRO** · NOR FLASH · SOP-8-208mil
FM25Q64AI3-SOB-T-G from FUDAN MICRO, in a SOP-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select Input: when CS# is high the device is deselected and DO/DQ outputs are high impedance; CS# must be pulled up in standby and must track VCC at power-up. |
| 2 | DO(DQ1) | bidirectional | Data Output (Data Input Output 1): serial data output for standard SPI, and DQ1 for Dual/Quad SPI; used for Dual SPI instructions. |
| 3 | WP#(DQ2) | bidirectional | Write Protect Input (Data Input Output 2): active-low pin that prevents writing to the Status Registers; becomes DQ2 for Quad SPI when the QE bit is set, and its write-protect function is then unavailable. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | DI(DQ0) | bidirectional | Data Input (Data Input Output 0): serial data input for standard SPI, and DQ0 for Dual/Quad SPI instructions. |
| 6 | CLK | input | Serial Clock Input: provides the timing for serial input and output operations. |
| 7 | HOLD#(DQ3) | bidirectional | Hold Input (Data Input Output 3): active-low pin that pauses device operation while CS# is low; becomes DQ3 for Quad SPI when the QE bit is set, and its hold function is then unavailable. |
| 8 | VCC | power_in | Power supply, 2.7V to 3.6V single voltage supply per the datasheet features. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FUDAN MICRO |
| Package | SOP-8-208mil |
| Category | Memory |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `FM25Q64AI3-SOB-T-G`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8-208mil (KiCad packages3D, STEP)
- 3D model files: `fm25q64ai3-sob-t-g-etched.step` / `fm25q64ai3-sob-t-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fm25q64ai3-sob-t-g.step` / `fm25q64ai3-sob-t-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [FUDAN MICRO datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590931055979409408) (67 pp, sha256 `9e006feed7443128`, retrieved 2026-10-09, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fm25q64ai3-sob-t-g-datasheet.pdf)