main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs fm25l16b-gtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers fm25l16b-gtr: viewers · Ray
fm25l16b-gtr-etched.fit.json fm25l16b-gtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
fm25l16b-gtr-etched.glb fm25l16b-gtr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
fm25l16b-gtr-etched.step fm25l16b-gtr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
fm25l16b-gtr.glb Publish 0.1.0 · Ray
fm25l16b-gtr.kicad_mod Publish 0.1.0 · Ray
fm25l16b-gtr.kicad_sym Publish 0.1.0 · Ray
fm25l16b-gtr.lbr Publish 0.1.0 · Ray
fm25l16b-gtr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json fm25l16b-gtr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
README.md fm25l16b-gtr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

FM25L16B-GTR

Infineon · FRAM · SOIC-8

FM25L16B-GTR from Infineon, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS input Chip Select (active LOW). Activates the device and gates SCK internally; when HIGH, the device enters low-power standby mode, ignores other inputs, and tri-states SO. A falling edge on CS must occur before every opcode.
2 SO tri_state Serial Output (MISO). Data output pin driven only during a read; tri-stated at all other times, including when HOLD is LOW. Data transitions occur on the falling edge of SCK.
3 WP input Write Protect (active LOW). When WPEN = 1 in the Status Register, driving WP LOW inhibits writes to the Status Register (protecting the block-protect bits). Tie to VDD if unused.
4 VSS power_in Ground reference for the device. Must be connected to system ground.
5 SI input Serial Input (MOSI). Data/command input, sampled on the rising edge of SCK and ignored otherwise. Should always be driven to a valid logic level to meet IDD specifications. SI may be tied to SO for a single-wire data interface.
6 SCK input Serial Clock (0 to 20 MHz). All I/O is synchronized to SCK: inputs are latched on the rising edge and outputs are driven on the falling edge. Supports SPI modes 0 and 3.
7 HOLD input HOLD (active LOW). Suspends the current serial operation when driven LOW while SCK is LOW; SCK and CS transitions are ignored during hold. All HOLD transitions must occur while SCK is LOW. Tie to VDD if unused.
8 VDD power_in Power supply input, 2.7 V to 3.6 V (3.3 V typ). Typical standby current 3 uA; active current 0.2 mA at 1 MHz SCK, 3 mA at 20 MHz SCK.

Key specifications

Parameter Value
Manufacturer Infineon
Package SOIC-8
Category Memory
Pins 8

Ordering variants

  • FM25L16B-GTRG
  • FM25L16B-GTR
  • FM25L16B-GTRDG
  • FM25L16B-GTRDGTR

CAD (KiCad official)

  • Symbol: FM25L16B-GTR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: fm25l16b-gtr-etched.step / fm25l16b-gtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fm25l16b-gtr.step / fm25l16b-gtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon datasheet (None pp, sha256 6273e08251eec1f1, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF