← Commit history

Initial commit: component/fm25l16b-gtr

Ray ·31307b9a2a ·
2 files changed +84
README.mdadded+50
@@ -0,0 +1,50 @@+# FM25L16B-GTR++**Infineon** · FRAM · SOIC-8++FM25L16B-GTR from Infineon, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS | input | Chip Select (active LOW). Activates the device and gates SCK internally; when HIGH, the device enters low-power standby mode, ignores other inputs, and tri-states SO. A falling edge on CS must occur before every opcode. |+| 2 | SO | tri_state | Serial Output (MISO). Data output pin driven only during a read; tri-stated at all other times, including when HOLD is LOW. Data transitions occur on the falling edge of SCK. |+| 3 | WP | input | Write Protect (active LOW). When WPEN = 1 in the Status Register, driving WP LOW inhibits writes to the Status Register (protecting the block-protect bits). Tie to VDD if unused. |+| 4 | VSS | power_in | Ground reference for the device. Must be connected to system ground. |+| 5 | SI | input | Serial Input (MOSI). Data/command input, sampled on the rising edge of SCK and ignored otherwise. Should always be driven to a valid logic level to meet IDD specifications. SI may be tied to SO for a single-wire data interface. |+| 6 | SCK | input | Serial Clock (0 to 20 MHz). All I/O is synchronized to SCK: inputs are latched on the rising edge and outputs are driven on the falling edge. Supports SPI modes 0 and 3. |+| 7 | HOLD | input | HOLD (active LOW). Suspends the current serial operation when driven LOW while SCK is LOW; SCK and CS transitions are ignored during hold. All HOLD transitions must occur while SCK is LOW. Tie to VDD if unused. |+| 8 | VDD | power_in | Power supply input, 2.7 V to 3.6 V (3.3 V typ). Typical standby current 3 uA; active current 0.2 mA at 1 MHz SCK, 3 mA at 20 MHz SCK. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Infineon |+| Package | SOIC-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `FM25L16B-GTRG`+- `FM25L16B-GTR`+- `FM25L16B-GTRDG`+- `FM25L16B-GTRDGTR`++## CAD (KiCad official)++- Symbol: `FM25L16B-GTR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Infineon datasheet](docs/fm25l16b-gtr-datasheet.pdf) (None pp, sha256 `6273e08251eec1f1`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/fm25l16b-gtr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "fm25l16b-gtr",+  "version": "0.1.0",+  "type": "component",+  "description": "Infineon FRAM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "fm25l16b-gtr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "fm25l16b-gtr.kicad_sym",+    "fm25l16b-gtr.kicad_mod",+    "fm25l16b-gtr.glb",+    "fm25l16b-gtr.step",+    "fm25l16b-gtr.lbr",+    "docs/hero.png",+    "docs/fm25l16b-gtr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file