component
FM24V05-GTR
Public Made by Adomby adom
Infineon Cypress Semicon FRAM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownFM24V05-GTR
Infineon Cypress Semicon · FRAM · SOIC-8
FM24V05-GTR from Infineon Cypress Semicon, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device Select Address bit 0. One of three device-select address inputs used to select one of up to 8 devices on the same I2C bus. Internally pulled down. |
| 2 | A1 | input | Device Select Address bit 1. Must match the corresponding bit in the slave address to select this device on the I2C bus. Internally pulled down. |
| 3 | A2 | input | Device Select Address bit 2. Must match the corresponding bit in the slave address to select this device on the I2C bus. Internally pulled down. |
| 4 | VSS | power_in | Ground for the device. Must be connected to the ground of the system. |
| 5 | SDA | bidirectional | Serial Data/Address. Bi-directional open-drain I2C data pin, wire-AND'd with other devices on the bus. Requires an external pull-up resistor; input has Schmitt trigger and output has slope control. |
| 6 | SCL | input | Serial Clock. I2C clock input; data is clocked out on the falling edge and into the device on the rising edge. Schmitt trigger input for noise immunity. |
| 7 | WP | input | Write Protect. When tied to VDD, the entire memory map is write-protected; when tied to VSS, all addresses are writable. Internally pulled down. |
| 8 | VDD | power_in | Power supply input to the device. Operating range 2.0 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Cypress Semicon |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
FM24V05-GTRGFM24V05-GTR
CAD (KiCad official)
- Symbol:
FM24V05-GTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
fm24v05-gtr-etched.step/fm24v05-gtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm24v05-gtr.step/fm24v05-gtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Cypress Semicon datasheet (21 pp, sha256
5f6841e5063d8c39, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).