component
FM24CL04B-GTR
Public Made by Adomby adom
Infineon FRAM, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
main
Ray
fm24cl04b-gtr: laser-etched CAD + chip hero (factory 2.0.0 backfill)
e866e5b
FM24CL04B-GTR
Infineon · FRAM · SOIC-8
FM24CL04B-GTR from Infineon, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect. Not internally bonded; leave floating or tie as convenient for layout. |
| 2 | A1 | input | Device Select Address 1. One of the device-select address inputs used to select one of up to 4 devices on the same I2C bus; must match the corresponding bit in the slave address. Internally pulled down. |
| 3 | A2 | input | Device Select Address 2. One of the device-select address inputs used to select one of up to 4 devices on the same I2C bus; must match the corresponding bit in the slave address. Internally pulled down. |
| 4 | VSS | power_in | Ground for the device. Must be connected to the system ground. |
| 5 | SDA | bidirectional | Serial Data/Address. Bi-directional open-drain I2C data line; wire-AND'd with other devices on the bus. Input has a Schmitt trigger for noise immunity; output driver has slope control for falling edges. Requires an external pull-up resistor. |
| 6 | SCL | input | Serial Clock for the I2C interface. Data is clocked out on the falling edge and into the device on the rising edge. Input has a Schmitt trigger for noise immunity. |
| 7 | WP | input | Write Protect. When tied to VDD, the entire memory map is write-protected. When tied to ground, all addresses are write-enabled. Internally pulled down. |
| 8 | VDD | power_in | Power supply input, 2.7 V to 3.65 V operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
FM24CL04B-GTRFM24CL04B-GTRG
CAD (KiCad official)
- Symbol:
FM24CL04B-GTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
fm24cl04b-gtr-etched.step/fm24cl04b-gtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm24cl04b-gtr.step/fm24cl04b-gtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon datasheet (18 pp, sha256
2cd0c6b6f3f5958b, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FM24CL04B-GTR
**Infineon** · FRAM · SOIC-8
FM24CL04B-GTR from Infineon, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect. Not internally bonded; leave floating or tie as convenient for layout. |
| 2 | A1 | input | Device Select Address 1. One of the device-select address inputs used to select one of up to 4 devices on the same I2C bus; must match the corresponding bit in the slave address. Internally pulled down. |
| 3 | A2 | input | Device Select Address 2. One of the device-select address inputs used to select one of up to 4 devices on the same I2C bus; must match the corresponding bit in the slave address. Internally pulled down. |
| 4 | VSS | power_in | Ground for the device. Must be connected to the system ground. |
| 5 | SDA | bidirectional | Serial Data/Address. Bi-directional open-drain I2C data line; wire-AND'd with other devices on the bus. Input has a Schmitt trigger for noise immunity; output driver has slope control for falling edges. Requires an external pull-up resistor. |
| 6 | SCL | input | Serial Clock for the I2C interface. Data is clocked out on the falling edge and into the device on the rising edge. Input has a Schmitt trigger for noise immunity. |
| 7 | WP | input | Write Protect. When tied to VDD, the entire memory map is write-protected. When tied to ground, all addresses are write-enabled. Internally pulled down. |
| 8 | VDD | power_in | Power supply input, 2.7 V to 3.65 V operating range. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `FM24CL04B-GTR`
- `FM24CL04B-GTRG`
## CAD (KiCad official)
- Symbol: `FM24CL04B-GTR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `fm24cl04b-gtr-etched.step` / `fm24cl04b-gtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fm24cl04b-gtr.step` / `fm24cl04b-gtr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Infineon datasheet](docs/fm24cl04b-gtr-datasheet.pdf) (18 pp, sha256 `2cd0c6b6f3f5958b`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fm24cl04b-gtr-datasheet.pdf)