component
FM24C16D-SO-T-G
Public Made by Adomby adom
FUDAN MICRO EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
main
Ray
fm24c16d-so-t-g: laser-etched CAD + chip hero (factory 2.0.0 backfill)
f6e3e0f
FM24C16D-SO-T-G
FUDAN MICRO · EEPROM · SOP-8
FM24C16D-SO-T-G from FUDAN MICRO, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | unconnected | Not Connected. Per the FM24C16D pin configuration table, address pins A0-A2 are internally not connected; the 16K device uses page-address bits inside the device-address byte instead of external address strapping. |
| 2 | A1 | unconnected | Not Connected. Address pin retained for pinout compatibility with lower-density 24Cxx EEPROMs but internally unused on the 16Kbit variant. |
| 3 | A2 | unconnected | Not Connected. Address pin retained for pinout compatibility with lower-density 24Cxx EEPROMs but internally unused on the 16Kbit variant. |
| 4 | GND | power_in | Ground reference for the device. Connect to the system 0V rail. |
| 5 | SDA | bidirectional | I2C Serial Data. Bidirectional, open-drain; requires an external pull-up resistor to VCC. May be wire-ORed with any number of other open-drain devices on the bus. VOL <= 0.4V at IOL = 2.1mA (VCC = 3.0V). |
| 6 | SCL | input | I2C Serial Clock input. Data is clocked into the EEPROM on the positive edge and out on the negative edge. Supports 400 kHz (1.7V-5.5V) and 1 MHz (2.5V-5.5V). |
| 7 | WP | input | Write Protect. WP tied to GND enables normal read/write operations; WP tied to VCC inhibits all writes to the full 16K array. If left floating with <3pF coupling to VCC plane, the pin is internally pulled to GND; >3pF coupling requires an explicit connection to GND. |
| 8 | VCC | power_in | Positive supply, 1.7V to 5.5V (2.5V to 5.5V for 1 MHz operation). Typical ICC = 0.4 mA read / 2.0 mA write at 400 kHz, 5.0V; standby current up to 6 uA. Absolute maximum 6.25V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FUDAN MICRO |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
FM24C16D-SO-T-G
CAD (KiCad official)
- Symbol:
FM24C16D-SO-T-G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
fm24c16d-so-t-g-etched.step/fm24c16d-so-t-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm24c16d-so-t-g.step/fm24c16d-so-t-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FUDAN MICRO datasheet (28 pp, sha256
07c4663d5bb48caa, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FM24C16D-SO-T-G
**FUDAN MICRO** · EEPROM · SOP-8
FM24C16D-SO-T-G from FUDAN MICRO, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | unconnected | Not Connected. Per the FM24C16D pin configuration table, address pins A0-A2 are internally not connected; the 16K device uses page-address bits inside the device-address byte instead of external address strapping. |
| 2 | A1 | unconnected | Not Connected. Address pin retained for pinout compatibility with lower-density 24Cxx EEPROMs but internally unused on the 16Kbit variant. |
| 3 | A2 | unconnected | Not Connected. Address pin retained for pinout compatibility with lower-density 24Cxx EEPROMs but internally unused on the 16Kbit variant. |
| 4 | GND | power_in | Ground reference for the device. Connect to the system 0V rail. |
| 5 | SDA | bidirectional | I2C Serial Data. Bidirectional, open-drain; requires an external pull-up resistor to VCC. May be wire-ORed with any number of other open-drain devices on the bus. VOL <= 0.4V at IOL = 2.1mA (VCC = 3.0V). |
| 6 | SCL | input | I2C Serial Clock input. Data is clocked into the EEPROM on the positive edge and out on the negative edge. Supports 400 kHz (1.7V-5.5V) and 1 MHz (2.5V-5.5V). |
| 7 | WP | input | Write Protect. WP tied to GND enables normal read/write operations; WP tied to VCC inhibits all writes to the full 16K array. If left floating with <3pF coupling to VCC plane, the pin is internally pulled to GND; >3pF coupling requires an explicit connection to GND. |
| 8 | VCC | power_in | Positive supply, 1.7V to 5.5V (2.5V to 5.5V for 1 MHz operation). Typical ICC = 0.4 mA read / 2.0 mA write at 400 kHz, 5.0V; standby current up to 6 uA. Absolute maximum 6.25V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FUDAN MICRO |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `FM24C16D-SO-T-G`
## CAD (KiCad official)
- Symbol: `FM24C16D-SO-T-G`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `fm24c16d-so-t-g-etched.step` / `fm24c16d-so-t-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fm24c16d-so-t-g.step` / `fm24c16d-so-t-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [FUDAN MICRO datasheet](docs/fm24c16d-so-t-g-datasheet.pdf) (28 pp, sha256 `07c4663d5bb48caa`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fm24c16d-so-t-g-datasheet.pdf)