component
FM24C16B-GTR
Public Made by Adomby adom
Infineon Cypress Semicon FRAM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownFM24C16B-GTR
Infineon Cypress Semicon · FRAM · SOIC-8
FM24C16B-GTR from Infineon Cypress Semicon, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect. Leave floating or tie to VSS. |
| 2 | NC | unconnected | No connect. Leave floating or tie to VSS. |
| 3 | NC | unconnected | No connect. Leave floating or tie to VSS. |
| 4 | VSS | power_in | Ground for the device. Must be connected to the ground of the system. |
| 5 | SDA | bidirectional | Serial Data/Address. Bi-directional open-drain I2C data pin; requires an external pull-up resistor. Input buffer includes a Schmitt trigger for noise immunity, and the output driver has slope control on falling edges. |
| 6 | SCL | input | Serial Clock for the I2C interface. Data is clocked out of the device on the falling edge and into the device on the rising edge. Supports up to 1 MHz. |
| 7 | WP | input | Write Protect. When tied to VDD, the entire memory map is write-protected; tie to VSS to enable writes. Internally pulled down (~40 kOhm strong pull-down when input is low, ~1 MOhm weak when input is high). |
| 8 | VDD | power_in | Power supply input to the device. Operating range 4.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Cypress Semicon |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
FM24C16B-GTRGFM24C16B-GTR
CAD (KiCad official)
- Symbol:
FM24C16B-GTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
fm24c16b-gtr-etched.step/fm24c16b-gtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm24c16b-gtr.step/fm24c16b-gtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Cypress Semicon datasheet (17 pp, sha256
b52542074ec04ea2, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).