component
FM24C08D-SO-T-G
Public Made by Adomby adom
FUDAN MICRO EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFM24C08D-SO-T-G
FUDAN MICRO · EEPROM · SOP-8
FM24C08D-SO-T-G from FUDAN MICRO, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | unconnected | Address pin A0 is listed as Not Connected in the pin configuration table; only one device can be addressed on the bus. |
| 2 | A1 | unconnected | Address pin A1 is listed as Not Connected in the pin configuration table; only one device can be addressed on the bus. |
| 3 | A2 | unconnected | Address pin A2 is listed as Not Connected in the pin configuration table; only one device can be addressed on the bus. |
| 4 | GND | power_in | Ground. |
| 5 | SDA | bidirectional | Serial data input/output; open-drain, bi-directional, may be wire-ORed with other open-drain or open-collector devices and is normally pulled high externally. |
| 6 | SCL | input | Serial clock input; positive edge clocks data into the EEPROM and negative edge clocks data out. |
| 7 | WP | input | Write protect; connected to GND allows normal read/write, connected to VCC inhibits all writes to the full 8K array, and a floating pin is internally pulled down to GND. |
| 8 | VCC | power_in | Power supply, 1.7V to 5.5V operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FUDAN MICRO |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Capacitance | CIN | 6 | pF | VIN = 0V, f = 1MHz | 6 | ||
| Output Capacitance | COUT | 8 | pF | VOUT = 0V, f = 1MHz | 6 | ||
| Supply Voltage | VCC | 1.7 | 5.5 | V | 6 | ||
| Operating Temperature | TA | -40 | 85 | °C | DC characteristics recommended operating range | 6 | |
| Supply Current (Read) | ICC1 | 0.4 | 1 | mA | VCC = 5.0V, Read at 400KHz | 6 | |
| Supply Current (Write) | ICC2 | 2 | 3 | mA | VCC = 5.0V, Write at 400KHz | 6 | |
| Standby Current | ISB1 | 1 | µA | VCC = 1.7V, VIN = VCC/ VSS | 6 | ||
| Standby Current | ISB2 | 6 | µA | VCC = 5.5V, VIN = VCC/ VSS | 6 | ||
| Input Leakage Current | ILI | 0.1 | 3 | µA | VIN = VCC/VSS | 6 | |
| Output Leakage Current | ILO | 0.05 | 3 | µA | VOUT = VCC/ VSS | 6 | |
| Input Low Level | VIL | -0.6 | V | 6 | |||
| Output Low Level 2 | VOL2 | 0.4 | V | VCC = 3.0V, IOL = 2.1 mA | 6 | ||
| Output Low Level 1 | VOL1 | 0.2 | V | VCC =1.7V, IOL = 0.15 mA | 6 | ||
| Operating Temperature (Plastic Package) | -55 | 125 | °C | 3 | |||
| Storage Temperature (Plastic Package) | -65 | 150 | °C | 3 | |||
| Voltage on Any Pin with Respect to Ground | -1 | 7 | V | 3 | |||
| Maximum Operating Voltage | 6.25 | V | 3 | ||||
| DC Output Current | 5 | mA | 3 | ||||
| Clock Frequency, SCL (400 kHz) | fSCL | 400 | kHz | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Clock Pulse Width Low (400 kHz) | tLOW | 1.3 | µs | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Clock Pulse Width High (400 kHz) | tHIGH | 0.6 | µs | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Noise Suppression Time (400 kHz) | tI | 80 | ns | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Clock Low to Data Out Valid (400 kHz) | tAA | 0.1 | 0.9 | µs | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | |
| Bus Free Time Before New Transmission (400 kHz) | tBUF | 1.3 | µs | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Start Hold Time (400 kHz) | tHD.STA | 0.6 | µs | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Start Setup Time (400 kHz) | tSU.STA | 0.6 | µs | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Data In Hold Time (400 kHz) | tHD.DAT | 0 | µs | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Data In Setup Time (400 kHz) | tSU.DAT | 100 | ns | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Inputs Rise Time (400 kHz) | tR | 300 | ns | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Inputs Fall Time (400 kHz) | tF | 300 | ns | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Stop Setup Time (400 kHz) | tSU.STO | 0.6 | µs | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Data Out Hold Time (400 kHz) | tDH | 100 | ns | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Write Cycle Time (400 kHz) | tWR | 5 | ms | 400 kHz table: TA = -40°C to +85°C, VCC = +1.7V to +5.5V, CL = 100 pF | 7 | ||
| Clock Frequency, SCL (1 MHz) | fSCL | 1 | MHz | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Clock Pulse Width Low (1 MHz) | tLOW | 500 | ns | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Clock Pulse Width High (1 MHz) | tHIGH | 320 | ns | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Noise Suppression Time (1 MHz) | tI | 80 | ns | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Clock Low to Data Out Valid (1 MHz) | tAA | 450 | ns | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Bus Free Time Before New Transmission (1 MHz) | tBUF | 500 | ns | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Start Hold Time (1 MHz) | tHD.STA | 250 | ns | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Start Setup Time (1 MHz) | tSU.STA | 250 | ns | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Data In Hold Time (1 MHz) | tHD.DAT | 0 | ns | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Data In Setup Time (1 MHz) | tSU.DAT | 50 | ns | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Inputs Rise Time (1 MHz) | tR | 120 | ns | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Inputs Fall Time (1 MHz) | tF | 120 | ns | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Stop Setup Time (1 MHz) | tSU.STO | 250 | ns | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Data Out Hold Time (1 MHz) | tDH | 100 | ns | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 | ||
| Write Cycle Time (1 MHz) | tWR | 5 | ms | 1 MHz table: TA = -40°C to +85°C, VCC = +2.5V to +5.5V, CL = 100 pF | 7 |
CAD (KiCad official)
- Symbol:
FM24C08D-SO-T-G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
fm24c08d-so-t-g-etched.step/fm24c08d-so-t-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm24c08d-so-t-g.step/fm24c08d-so-t-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FUDAN MICRO datasheet (28 pp, sha256
6d1332784e9e9edb, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).