component
fm1905
Public Made by Adomby adom
Shenzhen Fuman LCD Drivers, SOIC-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
main
Ray
fm1905: laser-etched CAD + chip hero (factory 2.0.0 backfill)
b5b9721
fm1905
Shenzhen Fuman · LCD Drivers · SOIC-16
fm1905 from Shenzhen Fuman, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CSB | input | Chip select input, requires external pull-up resistor. When /CS is high, read/write of FM1905 data and commands is invalid and the serial interface is reset. When /CS is low and used as an input, data/command read/write to FM1905 is valid. |
| 2 | WRB | input | Write pulse input, requires external pull-up resistor. On the rising edge of /WR, data on the DATA line is written into FM1905. |
| 3 | DATA | bidirectional | Serial data input/output pin; requires external pull-up resistor (RPH typ 80KΩ at 3V, 60KΩ at 5V). |
| 4 | VSS | power_in | Negative supply / ground reference (0 V). |
| 5 | VLCD | power_in | LCD bias voltage input. Must satisfy VLCD < VDD; typical arrangement uses an external adjustable resistor (~15KΩ) to set the LCD operating voltage (e.g. VLCD=4V when VDD=5V). |
| 6 | VDD | power_in | Positive supply input, 3.0 V to 5.0 V (absolute max -0.3 to 5.5 V). |
| 7 | COM0 | output | LCD common output 0. Drives one of the up to 4 LCD backplanes selected by the bias/duty configuration. |
| 8 | COM1 | output | LCD common output 1. |
| 9 | COM2 | output | LCD common output 2. |
| 10 | COM3 | output | LCD common output 3. |
| 11 | SEG23 | output | LCD segment output 23. Drives one column of the 6x4 dot matrix; typical source/sink is 70-200 uA. |
| 12 | SEG20 | output | LCD segment output 20. |
| 13 | SEG17 | output | LCD segment output 17. |
| 14 | SEG14 | output | LCD segment output 14. |
| 15 | SEG11 | output | LCD segment output 11. |
| 16 | SEG8 | output | LCD segment output 8. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Fuman |
| Package | SOIC-16 |
| Category | LED-drv |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
fm1905 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
fm1905-etched.step/fm1905-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm1905.step/fm1905.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen Fuman datasheet (12 pp, sha256
674510feaa76392f, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# fm1905
**Shenzhen Fuman** · LCD Drivers · SOIC-16
fm1905 from Shenzhen Fuman, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CSB | input | Chip select input, requires external pull-up resistor. When /CS is high, read/write of FM1905 data and commands is invalid and the serial interface is reset. When /CS is low and used as an input, data/command read/write to FM1905 is valid. |
| 2 | WRB | input | Write pulse input, requires external pull-up resistor. On the rising edge of /WR, data on the DATA line is written into FM1905. |
| 3 | DATA | bidirectional | Serial data input/output pin; requires external pull-up resistor (RPH typ 80KΩ at 3V, 60KΩ at 5V). |
| 4 | VSS | power_in | Negative supply / ground reference (0 V). |
| 5 | VLCD | power_in | LCD bias voltage input. Must satisfy VLCD < VDD; typical arrangement uses an external adjustable resistor (~15KΩ) to set the LCD operating voltage (e.g. VLCD=4V when VDD=5V). |
| 6 | VDD | power_in | Positive supply input, 3.0 V to 5.0 V (absolute max -0.3 to 5.5 V). |
| 7 | COM0 | output | LCD common output 0. Drives one of the up to 4 LCD backplanes selected by the bias/duty configuration. |
| 8 | COM1 | output | LCD common output 1. |
| 9 | COM2 | output | LCD common output 2. |
| 10 | COM3 | output | LCD common output 3. |
| 11 | SEG23 | output | LCD segment output 23. Drives one column of the 6x4 dot matrix; typical source/sink is 70-200 uA. |
| 12 | SEG20 | output | LCD segment output 20. |
| 13 | SEG17 | output | LCD segment output 17. |
| 14 | SEG14 | output | LCD segment output 14. |
| 15 | SEG11 | output | LCD segment output 11. |
| 16 | SEG8 | output | LCD segment output 8. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Fuman |
| Package | SOIC-16 |
| Category | LED-drv |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `fm1905`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `fm1905-etched.step` / `fm1905-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fm1905.step` / `fm1905.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shenzhen Fuman datasheet](docs/fm1905-datasheet.pdf) (12 pp, sha256 `674510feaa76392f`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fm1905-datasheet.pdf)