component
FL7740MX
Public Made by Adomby adom
onsemi LED Drivers, SOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
86b080e
FL7740MX
onsemi · LED Drivers · SOP-10
FL7740MX from onsemi, in a SOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | IC operating current and MOSFET driving current are supplied through this pin, with VDD-ON 16 V typical, VDD-OFF 7.75 V typical, and an absolute maximum of 30 V. |
| 2 | GND | power_in | Controller ground pin. |
| 3 | GATE | output | Internal totem-pole output driver that drives the power MOSFET, with an absolute voltage range of -0.3 V to 30 V. |
| 4 | CS | input | Connected to a current sense resistor to detect MOSFET current for pulse-by-pulse current limit, with an absolute voltage range of -0.3 V to 6 V and a negative pulse limit of -1.5 V. |
| 5 | VS | power_in | Connected to the auxiliary winding through a resistor divider to detect the output voltage, regulated to 3.5 V VREF, with an absolute voltage range of -0.3 V to 6 V. |
| 6 | PF | passive | Connected to a resistor to set the power factor optimizer coefficient, with an absolute voltage range of -0.3 V to 6 V. |
| 7 | BIAS | passive | Bypass pin for the internal 5 V supply that powers all control circuitry, with VBIAS of 4.85 V to 5.15 V (5.00 V typical). |
| 8 | COMV | passive | Connected to a capacitor between COMV and GND for loop compensation, with an absolute voltage range of -0.3 V to 6 V. |
| 9 | NC | unconnected | No connection. |
| 10 | HV | input | Connected to the rectified input voltage through a resistor for fast startup, with an HV pin voltage rating of 560 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOP-10 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Turn-On Threshold Voltage | VDD-ON | 14.5 | 16 | 17.5 | V | 4 | |
| Turn-Off Threshold Voltage | VDD-OFF | 6.75 | 7.75 | 8.75 | V | 4 | |
| Operating Current | IDD-OP | 3 | 5 | 6.5 | mA | CLOAD = 1 nF, VDD = 18V | 4 |
| Operating Current during Auto Restart | IDD-AR | 0.3 | 1 | mA | 4 | ||
| VDD Over-Voltage-Protection | VDD-OVP | 24 | 25 | 26 | V | 4 | |
| VBIAS Voltage | VBIAS | 4.85 | 5 | 5.15 | V | 4 | |
| Output Voltage Low | VOL | 0.2 | V | 4 | |||
| Output Voltage High | VOH | 17.8 | V | VDD = 18 V | 4 | ||
| Peak Sourcing Current | Isource | 180 | mA | Design guaranteed; CLOAD = 1 nF, VDD = 20 V | 4 | ||
| Peak Sourcing Current | Isource | 210 | mA | Design guaranteed; CLOAD = 1 nF, VDD = 23 V | 4 | ||
| Peak Sinking Current | Isink | 385 | mA | Design guaranteed; CLOAD = 1 nF, VDD = 20 V | 4 | ||
| Peak Sinking Current | Isink | 435 | mA | Design guaranteed; CLOAD = 1 nF, VDD = 23 V | 4 | ||
| Rising Time | tr | 110 | 150 | 190 | ns | CLOAD = 1 nF | 4 |
| Falling Time | tf | 40 | 60 | 80 | ns | CLOAD = 1 nF | 4 |
| Supply Current From HV Pin | IHV | 3 | 9 | mA | VHV = 560 V, VDD = 0 V | 4 | |
| Leakage Current after Startup | IHV-LC | 1 | 10 | A | 5 | ||
| JFET Regulation Time at Startup | tR-JFET | 400 | 500 | 600 | ms | Design guaranteed | 5 |
| VDD High Limit during JFET Regulation | VDD-JFET-HL | 17.5 | 19 | 20.5 | V | 5 | |
| VDD Low Limit during JFET Regulation | VDD-JFET-LL | 15.5 | 17 | 18.5 | V | 5 | |
| Min. Turn-on Time Min. Limit | TON-MIN-MIN | 0.4 | s | Design guaranteed | 5 | ||
| Min. Turn-on Time Max. Limit | TON-MIN-MAX | 2 | s | Design guaranteed | 5 | ||
| Max. Turn-on Time | TON-MAX | 23.3 | s | Design guaranteed | 5 | ||
| Max. Frequency | fMAX | 60 | 65 | 70 | kHz | 5 | |
| Min. Frequency | fMIN | 0.72 | 0.8 | 0.88 | kHz | 5 | |
| Propagation Delay to GATE | tPD | 50 | 100 | 150 | ns | Design guaranteed | 5 |
| tDIS Blanking Time at VS Sampling | tDIS-BNK | 0.95 | 1 | 1.05 | s | Design guaranteed | 5 |
| VS Clamping Voltage | VVS-CLAMP | -0.1 | V | IVS=1 mA | 5 | ||
| VS Clamping Voltage | VVS-CLAMP | 0.35 | V | IVS=10 A | 5 | ||
| Reference Voltage | VREF | 3.465 | 3.5 | 3.535 | V | 5 | |
| CV Regulation Tolerance | CVREGULATION | -0.7 | 0.7 | % | VVS = 3.5 V, TJ = 25°C | 5 | |
| CV Regulation Tolerance | CVREGULATION | -1.2 | 1.2 | % | VVS = 3.5 V, TJ = −40~125°C | 5 | |
| Transconductance | gM | 16 | 20 | 24 | mho | 5 | |
| COMV Sink Current | ICOMV-SINK | 8 | 10 | 12 | A | VVS = 4 V | 5 |
| COMV Source Current | ICOMV-SOURCE | 8 | 10 | 12 | A | VVS = 3 V | 5 |
| COMV High Voltage | VCOMV-HGH | 4.7 | V | 5 | |||
| COMV Low Voltage | VCOMV-LOW | 0.1 | V | 5 | |||
| SS1 Minimum Time | tSS1-MIN | 2 | ms | Design guaranteed | 5 | ||
| SS1 Maximum Time | tSS1-MAX | 100 | ms | Design guaranteed | 5 | ||
| DYN Reference Set Threshold | VDYN-REF-SET | 0.72 | 0.8 | 0.88 | V | 5 | |
| OV Reference 4 | VOV-REF4 | 14 | 15 | 16 | % | 5 | |
| OV Reference 3 | VOV-REF3 | 9 | 10 | 11 | % | 5 | |
| OV Reference 2 | VOV-REF2 | 4.7 | 5.7 | 6.7 | % | 5 | |
| OV Reference 1 | VOV-REF1 | 1.86 | 2.86 | 3.86 | % | 5 | |
| UV Reference 1 | VUV-REF1 | -3.86 | -2.86 | -1.86 | % | 5 | |
| UV Reference 2 | VUV-REF2 | -6.7 | -5.7 | -4.7 | % | 5 | |
| High Current Limit Threshold | VCS-HIGH-CL | 1.13 | 1.2 | 1.27 | V | 6 | |
| Low Current Limit Threshold | VCS-LOW-CL | 0.15 | 0.2 | 0.25 | V | 6 | |
| Over Current Protection Voltage | VCS-OCP | 1.8 | V | 6 | |||
| CS Threshold Voltage for SRSP | VCS-SRSP | 0.04 | 0.075 | 0.125 | V | 6 | |
| Max. Turn-on Time for SRSP | tTON-MAX-SRSP | 7.5 | 10 | 12.5 | s | IVS = 100 A | 6 |
| Max. Turn-on Time for SRSP | tTON-MAX-SRSP | 1.3 | 1.6 | 1.9 | s | IVS = 700 A | 6 |
| HV Pin Voltage Range | VHV(MAX) | 560 | V | 4 | |||
| VDD, GATE Pin Voltage Range | VMV(MAX) | -0.3 | 30 | V | 4 | ||
| COMV, PF, BIAS, VS, CS Pin Voltage Range | VLV(MAX) | -0.3 | 6 | V | 4 | ||
| VS, CS Pin Negative Pulse Voltage | VLV(PULSE) | -1.5 | V | at ILV < 0.2 A and tPULSE < 300 ns | 4 | ||
| Maximum Power Dissipation | PD(MAX) | 663 | mW | TA < 50°C | 4 | ||
| Maximum Junction Temperature | TJ(max) | 150 | °C | 4 | |||
| Ambient Temperature | TA | -40 | 125 | °C | 4 | ||
| Junction-to-Ambient Thermal Impedance | RJA | 158 | °C/W | 4 | |||
| Junction-to-Case Thermal Impedance | RJC | 39 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
FL7740MX - Footprint:
Package_SO:SOIC-10_3.9x4.9mm_P1mm - 3D model: SOP-10, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.75 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
fl7740mx-etched.step/fl7740mx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fl7740mx.step/fl7740mx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (15 pp, sha256
0e52d79061968007, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FL7740MX
**onsemi** · LED Drivers · SOP-10
FL7740MX from onsemi, in a SOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | IC operating current and MOSFET driving current are supplied through this pin, with VDD-ON 16 V typical, VDD-OFF 7.75 V typical, and an absolute maximum of 30 V. |
| 2 | GND | power_in | Controller ground pin. |
| 3 | GATE | output | Internal totem-pole output driver that drives the power MOSFET, with an absolute voltage range of -0.3 V to 30 V. |
| 4 | CS | input | Connected to a current sense resistor to detect MOSFET current for pulse-by-pulse current limit, with an absolute voltage range of -0.3 V to 6 V and a negative pulse limit of -1.5 V. |
| 5 | VS | power_in | Connected to the auxiliary winding through a resistor divider to detect the output voltage, regulated to 3.5 V VREF, with an absolute voltage range of -0.3 V to 6 V. |
| 6 | PF | passive | Connected to a resistor to set the power factor optimizer coefficient, with an absolute voltage range of -0.3 V to 6 V. |
| 7 | BIAS | passive | Bypass pin for the internal 5 V supply that powers all control circuitry, with VBIAS of 4.85 V to 5.15 V (5.00 V typical). |
| 8 | COMV | passive | Connected to a capacitor between COMV and GND for loop compensation, with an absolute voltage range of -0.3 V to 6 V. |
| 9 | NC | unconnected | No connection. |
| 10 | HV | input | Connected to the rectified input voltage through a resistor for fast startup, with an HV pin voltage rating of 560 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOP-10 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 10 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Turn-On Threshold Voltage | VDD-ON | 14.5 | 16 | 17.5 | V | | 4 |
| Turn-Off Threshold Voltage | VDD-OFF | 6.75 | 7.75 | 8.75 | V | | 4 |
| Operating Current | IDD-OP | 3 | 5 | 6.5 | mA | CLOAD = 1 nF, VDD = 18V | 4 |
| Operating Current during Auto Restart | IDD-AR | | 0.3 | 1 | mA | | 4 |
| VDD Over-Voltage-Protection | VDD-OVP | 24 | 25 | 26 | V | | 4 |
| VBIAS Voltage | VBIAS | 4.85 | 5 | 5.15 | V | | 4 |
| Output Voltage Low | VOL | | | 0.2 | V | | 4 |
| Output Voltage High | VOH | 17.8 | | | V | VDD = 18 V | 4 |
| Peak Sourcing Current | Isource | 180 | | | mA | Design guaranteed; CLOAD = 1 nF, VDD = 20 V | 4 |
| Peak Sourcing Current | Isource | 210 | | | mA | Design guaranteed; CLOAD = 1 nF, VDD = 23 V | 4 |
| Peak Sinking Current | Isink | 385 | | | mA | Design guaranteed; CLOAD = 1 nF, VDD = 20 V | 4 |
| Peak Sinking Current | Isink | 435 | | | mA | Design guaranteed; CLOAD = 1 nF, VDD = 23 V | 4 |
| Rising Time | tr | 110 | 150 | 190 | ns | CLOAD = 1 nF | 4 |
| Falling Time | tf | 40 | 60 | 80 | ns | CLOAD = 1 nF | 4 |
| Supply Current From HV Pin | IHV | | 3 | 9 | mA | VHV = 560 V, VDD = 0 V | 4 |
| Leakage Current after Startup | IHV-LC | | 1 | 10 | A | | 5 |
| JFET Regulation Time at Startup | tR-JFET | 400 | 500 | 600 | ms | Design guaranteed | 5 |
| VDD High Limit during JFET Regulation | VDD-JFET-HL | 17.5 | 19 | 20.5 | V | | 5 |
| VDD Low Limit during JFET Regulation | VDD-JFET-LL | 15.5 | 17 | 18.5 | V | | 5 |
| Min. Turn-on Time Min. Limit | TON-MIN-MIN | 0.4 | | | s | Design guaranteed | 5 |
| Min. Turn-on Time Max. Limit | TON-MIN-MAX | | | 2 | s | Design guaranteed | 5 |
| Max. Turn-on Time | TON-MAX | | | 23.3 | s | Design guaranteed | 5 |
| Max. Frequency | fMAX | 60 | 65 | 70 | kHz | | 5 |
| Min. Frequency | fMIN | 0.72 | 0.8 | 0.88 | kHz | | 5 |
| Propagation Delay to GATE | tPD | 50 | 100 | 150 | ns | Design guaranteed | 5 |
| tDIS Blanking Time at VS Sampling | tDIS-BNK | 0.95 | 1 | 1.05 | s | Design guaranteed | 5 |
| VS Clamping Voltage | VVS-CLAMP | -0.1 | | | V | IVS=1 mA | 5 |
| VS Clamping Voltage | VVS-CLAMP | | | 0.35 | V | IVS=10 A | 5 |
| Reference Voltage | VREF | 3.465 | 3.5 | 3.535 | V | | 5 |
| CV Regulation Tolerance | CVREGULATION | -0.7 | | 0.7 | % | VVS = 3.5 V, TJ = 25°C | 5 |
| CV Regulation Tolerance | CVREGULATION | -1.2 | | 1.2 | % | VVS = 3.5 V, TJ = −40~125°C | 5 |
| Transconductance | gM | 16 | 20 | 24 | mho | | 5 |
| COMV Sink Current | ICOMV-SINK | 8 | 10 | 12 | A | VVS = 4 V | 5 |
| COMV Source Current | ICOMV-SOURCE | 8 | 10 | 12 | A | VVS = 3 V | 5 |
| COMV High Voltage | VCOMV-HGH | 4.7 | | | V | | 5 |
| COMV Low Voltage | VCOMV-LOW | | | 0.1 | V | | 5 |
| SS1 Minimum Time | tSS1-MIN | 2 | | | ms | Design guaranteed | 5 |
| SS1 Maximum Time | tSS1-MAX | | | 100 | ms | Design guaranteed | 5 |
| DYN Reference Set Threshold | VDYN-REF-SET | 0.72 | 0.8 | 0.88 | V | | 5 |
| OV Reference 4 | VOV-REF4 | 14 | 15 | 16 | % | | 5 |
| OV Reference 3 | VOV-REF3 | 9 | 10 | 11 | % | | 5 |
| OV Reference 2 | VOV-REF2 | 4.7 | 5.7 | 6.7 | % | | 5 |
| OV Reference 1 | VOV-REF1 | 1.86 | 2.86 | 3.86 | % | | 5 |
| UV Reference 1 | VUV-REF1 | -3.86 | -2.86 | -1.86 | % | | 5 |
| UV Reference 2 | VUV-REF2 | -6.7 | -5.7 | -4.7 | % | | 5 |
| High Current Limit Threshold | VCS-HIGH-CL | 1.13 | 1.2 | 1.27 | V | | 6 |
| Low Current Limit Threshold | VCS-LOW-CL | 0.15 | 0.2 | 0.25 | V | | 6 |
| Over Current Protection Voltage | VCS-OCP | 1.8 | | | V | | 6 |
| CS Threshold Voltage for SRSP | VCS-SRSP | 0.04 | 0.075 | 0.125 | V | | 6 |
| Max. Turn-on Time for SRSP | tTON-MAX-SRSP | 7.5 | 10 | 12.5 | s | IVS = 100 A | 6 |
| Max. Turn-on Time for SRSP | tTON-MAX-SRSP | 1.3 | 1.6 | 1.9 | s | IVS = 700 A | 6 |
| HV Pin Voltage Range | VHV(MAX) | | | 560 | V | | 4 |
| VDD, GATE Pin Voltage Range | VMV(MAX) | -0.3 | | 30 | V | | 4 |
| COMV, PF, BIAS, VS, CS Pin Voltage Range | VLV(MAX) | -0.3 | | 6 | V | | 4 |
| VS, CS Pin Negative Pulse Voltage | VLV(PULSE) | -1.5 | | | V | at ILV < 0.2 A and tPULSE < 300 ns | 4 |
| Maximum Power Dissipation | PD(MAX) | | | 663 | mW | TA < 50°C | 4 |
| Maximum Junction Temperature | TJ(max) | | | 150 | °C | | 4 |
| Ambient Temperature | TA | -40 | | 125 | °C | | 4 |
| Junction-to-Ambient Thermal Impedance | RJA | | 158 | | °C/W | | 4 |
| Junction-to-Case Thermal Impedance | RJC | | 39 | | °C/W | | 4 |
## CAD (KiCad official)
- Symbol: `FL7740MX`
- Footprint: `Package_SO:SOIC-10_3.9x4.9mm_P1mm`
- 3D model: SOP-10, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.75 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `fl7740mx-etched.step` / `fl7740mx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fl7740mx.step` / `fl7740mx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/fl7740mx-d.pdf) (15 pp, sha256 `0e52d79061968007`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fl7740mx-datasheet.pdf)