FH9261-DCJ

{
 "schema": "adom.pads/1",
 "slug": "fh9261-dcj",
 "footprint": "SOT-23-6",
 "generated_from": {
  "footprint": "SOT-23-6@sha256:f341c73aac9dcb55",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -1.1375,
   -0.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-23-6@sha256:f341c73aac9dcb55"
 },
 "pad_count": 6,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "OD",
   "type": "output",
   "description": "Discharge-control N-MOSFET gate drive output. Pulled to VDD (V_DH = VDD-0.02V typ) to enable the discharge FET during normal operation; pulled low (V_DL = 0.1V typ, 0.5V max) to inhibit discharge on over-discharge, discharge over-current, or load short-circuit. V_OD absolute-max range VSS-0.3V to VDD+0.3V.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "CS",
   "type": "input",
   "description": "Current-sense / charger-detect input. Monitors the voltage between VSS and the pack's negative terminal (PB-) through the two series MOSFETs to detect discharge over-current (V_DIP = 240mV typ), load short-circuit (V_SIP = 0.58V typ, fixed), and charge over-current (V_CIP = -150mV typ). Also senses charger presence via V_CIP threshold. High-withstand pin: absolute-max V_CS = VDD-25V to VDD+0.3V (25V max between VDD and CS).",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "OC",
   "type": "output",
   "description": "Charge-control N-MOSFET gate drive output. Pulled to VDD (V_CH = VDD-0.02V typ) to enable the charge FET; pulled low (V_CL = 0.1V typ, 0.5V max) to inhibit charging on over-charge or charge over-current. High-withstand pin: absolute-max V_OC = VDD-25V to VDD+0.3V (survives reverse-connected charger up to 25V vs VDD).",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.1375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "NC",
   "type": "unconnected",
   "description": "No internal connection. Leave floating or tie to a copper pad; no electrical function.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.1375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "VDD",
   "type": "power_in",
   "description": "Positive supply input. Connect to battery + through a 100Ω (100Ω typ, 200Ω max) series resistor R1 with a 0.1µF decoupling capacitor C1 from VDD to VSS. Operating range V_DSOP1 = 1.5V to 8V; absolute-max VDD-VSS = -0.3V to +10V. Operating current I_DD = 3.0µA typ / 6.0µA max at VDD=3.9V.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.1375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "VSS",
   "type": "power_in",
   "description": "Ground / negative supply input. Connect directly to battery - (the pack common node between the cell and the two protection MOSFET sources).",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}