component
FH7071DZ
Public Made by Adomby adom
鑫飞宏 Battery Management, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFH7071DZ
鑫飞宏 · Battery Management · SOT-23-6
FH7071DZ from 鑫飞宏, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DO | output | Discharge MOSFET control terminal; the datasheet gives no numeric limit for this pin, and it drives the discharge-control MOSFET off during overdischarge, overcurrent, or short-circuit states. |
| 2 | VM | input | Charge/discharge current sense terminal; VM input voltage is rated VCC-12 V to VCC+0.3 V (absolute maximum), and the IC compares it against the charge overcurrent (VCHA) and discharge overcurrent/short-circuit (VEC, VSHORT) thresholds. |
| 3 | CO | output | Charge MOSFET control terminal; the datasheet gives no numeric limit for this pin, and it turns the charge-control MOSFET off during overcharge or charge overcurrent states. |
| 4 | NC | unconnected | Not connected (no internal connection stated in the datasheet). |
| 5 | VCC | power_in | Power supply input connected to the positive terminal of the battery; supply voltage is rated -0.3 V to 6 V absolute maximum, with 1.0 V to 5.5 V operating range. |
| 6 | VSS | power_in | Power ground connected to the negative terminal of the battery; it is the reference for VCC and VM measurements. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 鑫飞宏 |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 芯片电源电压 (Supply voltage) | VCC | 1 | 5.5 | V | 4 | ||
| 正常工作电流 (Normal operating current) | IVCC | 0.9 | 1.5 | 3 | μA | VCC=3.5V | 4 |
| 过放电时消耗电流 (Current consumption during over-discharge) | IOPED | 0.7 | 1.5 | μA | VCC=1.5V | 4 | |
| 充电器起始电压 (0V charging start voltage) | V0CH | 0 | 0.7 | 1.5 | V | 允许向 0V 电池充电功能 (0V charge function enabled) | 4 |
| 电源电压 (Supply voltage, absolute maximum) | VCC | -0.3 | 6 | V | 3 | ||
| VM端输入电压 (VM terminal input voltage, absolute maximum) | VM | 0.3 | V | Printed as VCC-12 to VCC+0.3 V, relative to VCC; max shown is the +0.3 V offset | 3 | ||
| 工作环境温度 (Operating ambient temperature) | TOPR | -40 | 85 | °C | 3 | ||
| 保存温度 (Storage temperature) | TSTG | -55 | 125 | °C | 3 | ||
| 过充电保护电压 (Overcharge detection voltage) | VOC | 4.45 | V | FH7071DZ variant nominal from product table | 3 | ||
| 过充电解除电压 (Overcharge release voltage) | VOCR | 4.25 | V | FH7071DZ variant nominal from product table | 3 | ||
| 过放电保护电压 (Overdischarge detection voltage) | VOD | 2.52 | V | FH7071DZ variant nominal from product table | 3 | ||
| 过放电解除电压 (Overdischarge release voltage) | VODR | 3.03 | V | FH7071DZ variant nominal from product table | 3 | ||
| 放电过流保护电压 (Discharge overcurrent detection voltage) | VEC | 0.18 | V | FH7071DZ variant nominal from product table | 3 | ||
| 短路保护电压 (Short-circuit detection voltage) | VSHORT | 1 | V | FH7071DZ variant nominal from product table | 3 | ||
| 充电过流保护电压 (Charge overcurrent detection voltage) | VCHA | -0.15 | V | FH7071DZ variant nominal from product table | 3 |
CAD (KiCad official)
- Symbol:
FH7071DZ - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
fh7071dz-etched.step/fh7071dz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fh7071dz.step/fh7071dz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 鑫飞宏 datasheet (8 pp, sha256
a535c5f7c51c1a6d, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).