FH12-22S-0.5SH(55)

{
 "schema": "adom/mark-check@1",
 "step": "fh12-22s-0-5sh-55-etched.step",
 "mpn": "FH12-22S-0.5SH(55)",
 "status": "PASS",
 "checks": [
  {
   "check": "axis",
   "status": "PASS",
   "detail": "text along the 11.43 mm axis",
   "angleDeg": 0
  },
  {
   "check": "upright",
   "status": "PASS",
   "detail": "upright, left to right, pin 1 left upper"
  },
  {
   "check": "size",
   "status": "PASS",
   "detail": "text height 0.949 mm, 92% of what fits (1.035 mm), block fills 64% of the 3.40 mm band height",
   "capMm": 0.9494,
   "fitMm": 1.0348
  },
  {
   "check": "band",
   "status": "PASS",
   "detail": "inside the usable band"
  },
  {
   "check": "flat",
   "status": "PASS",
   "detail": "flat, coplanar with the face (+5 um)"
  },
  {
   "check": "group",
   "status": "PASS",
   "detail": "Adom.LaserEtch group"
  },
  {
   "check": "colour",
   "status": "PASS",
   "detail": "light mark (sRGB 0.90, 0.90, 0.89)",
   "rgb": [
    0.896243869286,
    0.896243869286,
    0.886003966688
   ]
  },
  {
   "check": "widget",
   "status": "PASS",
   "detail": "16.5 px caps with the outline 320 px wide",
   "capHeightPx320": 16.5
  }
 ],
 "frame": {
  "reference": "normalized pose: footprint frame, X right, Y up, Z up off the board (after the stand-up turns)",
  "sourceToNormalized": {
   "turns": [],
   "text": "identity",
   "source": "as-is (Z up)"
  },
  "normalizedToOutput": {
   "checkImage": {
    "turns": [
     {
      "axis": "z",
      "quarterTurns": 0
     }
    ],
    "text": "identity",
    "pose": "standard reading pose: reading direction to +X, text up +Y, pin 1 lower left"
   },
   "outline": {
    "turns": [
     {
      "axis": "z",
      "quarterTurns": 2
     }
    ],
    "text": "180 deg about Z",
    "pose": "iso outline from +X+Y+Z"
   }
  },
  "modelUp": {
   "supplied": false,
   "source": "as-is (Z up)"
  },
  "packageFront": {
   "supplied": false,
   "face": "top",
   "source": "inferred: top face"
  },
  "textUp": {
   "supplied": false,
   "vector": [
    -0.0,
    1.0,
    0.0
   ],
   "source": "inferred from pin 1: footprint pad 1"
  },
  "mountedPose": false,
  "summary": "frame: normalized pose (source -> normalized: identity, as-is (Z up); normalized -> check image: identity, -> outline: 180 deg about Z); model up inferred, face top inferred, text up inferred from pin 1; not a mounted-pose check"
 },
 "plan": {
  "summary": "Mark along the 11.43 mm axis (+X), 1.03 mm text (2 lines), upright with pin 1 left upper, outline rot 180 after a 180 deg pose turn; ~18 px caps at 320 px",
  "band": [
   -4.98,
   -2.8,
   6.45,
   0.6
  ],
  "readingDirection": [
   1.0,
   0.0,
   0.0
  ],
  "lines": [
   "FH12-22S-",
   "0.5SH(55)"
  ]
 },
 "thresholds": {
  "sizePass": 0.8,
  "sizeFail": 0.6,
  "widgetPxPass": 6.0,
  "widgetPxFail": 4.0,
  "outlineOffsetMax": 0.15,
  "coplanarMaxMm": 0.02
 },
 "image": "fh12-22s-0-5sh-55-etched.check.png",
 "reportPath": "fh12-22s-0-5sh-55-etched.check.json"
}