component
FCX790ATA
Public Made by Adomby adom
Diodes Incorporated Bipolar Transistors - BJT, SOT-89. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
3dc331a
FCX790ATA
Diodes Incorporated · Bipolar Transistors - BJT · SOT-89
FCX790ATA from Diodes Incorporated, in a SOT-89. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B | input | Base of the PNP transistor; VEBO is limited to -5V and the base-emitter turn-on voltage is typically -0.8V at IC = -1A. |
| 2 | C | passive | Collector (also the exposed tab, shown as C on the pin-out); VCEO is -40V, IC is -2A continuous and ICM is -6A peak. |
| 3 | E | passive | Emitter of the PNP transistor, with the arrow pointing into the device in the symbol; VEBO is limited to -5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-89 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Base Breakdown Voltage | BVCBO | -50 | V | IC = -100μA | 2 | ||
| Collector-Emitter Breakdown Voltage | BVCEO | -40 | V | IC = -10mA | 2 | ||
| Emitter-Base Breakdown Voltage | BVEBO | -5 | V | IE = -100μA | 2 | ||
| Collector Cutoff Current | ICBO | -0.1 | µA | VCB = -30V | 2 | ||
| Emitter Cutoff Current | IEBO | -0.1 | nA | VEB = -4V | 2 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | -250 | mV | IC = -0.5A, IB = -5mA | 2 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | -350 | mV | IC = -1A, IB = -10mA | 2 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | -450 | mV | IC = -2A, IB = -50mA | 2 | ||
| Base-Emitter Saturation Voltage | VBE(sat) | -0.9 | mV | IC = -1A, IB = -10mA | 2 | ||
| DC Current Gain | hFE | 300 | 800 | IC = -10mA, VCE = -2V | 2 | ||
| DC Current Gain | hFE | 250 | IC = -500mA, VCE = -2V | 2 | |||
| DC Current Gain | hFE | 200 | IC = -1A, VCE = -2V | 2 | |||
| DC Current Gain | hFE | 150 | IC = -2A, VCE = -2V | 2 | |||
| Transitional frequency | fT | 100 | MHz | IC = -50mA, VCE = -5V, f = 50MHz | 2 | ||
| Collector-Base Voltage | VCBO | -50 | V | TA = +25°C | 2 | ||
| Collector-Emitter Voltage | VCEO | -40 | V | TA = +25°C | 2 | ||
| Emitter-Base Voltage | VEBO | -5 | V | TA = +25°C | 2 | ||
| Continuous Collector Current | IC | -2 | A | TA = +25°C | 2 | ||
| Peak Pulse Collector Current | ICM | -6 | A | single pulse, TA = +25°C | 2 | ||
| Power Dissipation (Note 5) | PD | 1 | W | 15mm x 15mm x 0.6mm FR4 PCB, TA = +25°C | 2 | ||
| Power Dissipation (Note 6) | PD | 2 | W | 40mm x 40mm x 0.6mm PCB, TA = +25°C | 2 | ||
| Operating and Storage Temperature Range | TJ, TSTG | -55 | 150 | °C | 2 | ||
| Base-Emitter Turn-On Voltage | VBE(on) | -0.8 | mV | IC = -1A, VCE = -2V | 2 | ||
| Input Capacitance | Cibo | 225 | pF | VEB = -0.5V, f = 1MHz | 2 | ||
| Output Capacitance | Cobo | 24 | pF | VCB = -10V, f = 1MHz | 2 | ||
| Turn-on time | ton | 35 | ns | IC=-500mA, IB1=-50mA, IB2=-50mA, VCC=-10V | 2 | ||
| Turn-off time | toff | 600 | ns | IC=-500mA, IB1=-50mA, IB2=-50mA, VCC=-10V | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | • Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 | 1 |
CAD (KiCad official)
- Symbol:
FCX790ATA - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89 (KiCad packages3D, STEP)
- 3D model files:
fcx790ata-etched.step/fcx790ata-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fcx790ata.step/fcx790ata.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (5 pp, sha256
847449e14d412d7e, retrieved 2026-10-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FCX790ATA
**Diodes Incorporated** · Bipolar Transistors - BJT · SOT-89
FCX790ATA from Diodes Incorporated, in a SOT-89. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B | input | Base of the PNP transistor; VEBO is limited to -5V and the base-emitter turn-on voltage is typically -0.8V at IC = -1A. |
| 2 | C | passive | Collector (also the exposed tab, shown as C on the pin-out); VCEO is -40V, IC is -2A continuous and ICM is -6A peak. |
| 3 | E | passive | Emitter of the PNP transistor, with the arrow pointing into the device in the symbol; VEBO is limited to -5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-89 |
| Category | Transistors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Base Breakdown Voltage | BVCBO | -50 | | | V | IC = -100μA | 2 |
| Collector-Emitter Breakdown Voltage | BVCEO | -40 | | | V | IC = -10mA | 2 |
| Emitter-Base Breakdown Voltage | BVEBO | -5 | | | V | IE = -100μA | 2 |
| Collector Cutoff Current | ICBO | | | -0.1 | µA | VCB = -30V | 2 |
| Emitter Cutoff Current | IEBO | | | -0.1 | nA | VEB = -4V | 2 |
| Collector-Emitter Saturation Voltage | VCE(sat) | | | -250 | mV | IC = -0.5A, IB = -5mA | 2 |
| Collector-Emitter Saturation Voltage | VCE(sat) | | | -350 | mV | IC = -1A, IB = -10mA | 2 |
| Collector-Emitter Saturation Voltage | VCE(sat) | | | -450 | mV | IC = -2A, IB = -50mA | 2 |
| Base-Emitter Saturation Voltage | VBE(sat) | | | -0.9 | mV | IC = -1A, IB = -10mA | 2 |
| DC Current Gain | hFE | 300 | | 800 | | IC = -10mA, VCE = -2V | 2 |
| DC Current Gain | hFE | 250 | | | | IC = -500mA, VCE = -2V | 2 |
| DC Current Gain | hFE | 200 | | | | IC = -1A, VCE = -2V | 2 |
| DC Current Gain | hFE | 150 | | | | IC = -2A, VCE = -2V | 2 |
| Transitional frequency | fT | 100 | | | MHz | IC = -50mA, VCE = -5V, f = 50MHz | 2 |
| Collector-Base Voltage | VCBO | | | -50 | V | TA = +25°C | 2 |
| Collector-Emitter Voltage | VCEO | | | -40 | V | TA = +25°C | 2 |
| Emitter-Base Voltage | VEBO | | | -5 | V | TA = +25°C | 2 |
| Continuous Collector Current | IC | | | -2 | A | TA = +25°C | 2 |
| Peak Pulse Collector Current | ICM | | | -6 | A | single pulse, TA = +25°C | 2 |
| Power Dissipation (Note 5) | PD | | | 1 | W | 15mm x 15mm x 0.6mm FR4 PCB, TA = +25°C | 2 |
| Power Dissipation (Note 6) | PD | | | 2 | W | 40mm x 40mm x 0.6mm PCB, TA = +25°C | 2 |
| Operating and Storage Temperature Range | TJ, TSTG | -55 | | 150 | °C | | 2 |
| Base-Emitter Turn-On Voltage | VBE(on) | | -0.8 | | mV | IC = -1A, VCE = -2V | 2 |
| Input Capacitance | Cibo | | 225 | | pF | VEB = -0.5V, f = 1MHz | 2 |
| Output Capacitance | Cobo | | 24 | | pF | VCB = -10V, f = 1MHz | 2 |
| Turn-on time | ton | | 35 | | ns | IC=-500mA, IB1=-50mA, IB2=-50mA, VCC=-10V | 2 |
| Turn-off time | toff | | 600 | | ns | IC=-500mA, IB1=-50mA, IB2=-50mA, VCC=-10V | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | • Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 | 1 |
## CAD (KiCad official)
- Symbol: `FCX790ATA`
- Footprint: `Package_TO_SOT_SMD:SOT-89-3`
- 3D model: SOT-89 (KiCad packages3D, STEP)
- 3D model files: `fcx790ata-etched.step` / `fcx790ata-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fcx790ata.step` / `fcx790ata.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/FCX790ATA.pdf) (5 pp, sha256 `847449e14d412d7e`, retrieved 2026-10-22, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fcx790ata-datasheet.pdf)