component
FCM32F103VBT6
Public Made by Adomby adom
Flashchip Microelectronics Microcontroller Units (MCUs/MPUs/SOCs), LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
4d6bcdd
FCM32F103VBT6
Flashchip Microelectronics · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-100(14x14)
FCM32F103VBT6 from Flashchip Microelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | Five-volt tolerant general-purpose I/O (FT), default function PE2 with alternate function TRACECK. |
| 2 | PE3 | bidirectional | Five-volt tolerant general-purpose I/O (FT), default function PE3 with alternate function TRACED0. |
| 3 | PE4 | bidirectional | Five-volt tolerant general-purpose I/O (FT), default function PE4 with alternate function TRACED1. |
| 4 | PE5 | bidirectional | Five-volt tolerant general-purpose I/O (FT), default function PE5 with alternate function TRACED2. |
| 5 | PE6 | bidirectional | Five-volt tolerant general-purpose I/O (FT), default function PE6 with alternate function TRACED3. |
| 6 | NC | unconnected | Not connected pin on the LQFP100 package. |
| 7 | PC13 | bidirectional | General-purpose I/O with TAMPER-RTC function. |
| 8 | PC14 | bidirectional | General-purpose I/O, also used as OSC32_IN for the 32 kHz oscillator. |
| 9 | PC15 | bidirectional | General-purpose I/O, also used as OSC32_OUT for the 32 kHz oscillator. |
| 10 | NC | unconnected | Not connected pin on the LQFP100 package. |
| 11 | NC | unconnected | Not connected pin on the LQFP100 package. |
| 12 | OSC_IN | input | External 4-16 MHz crystal oscillator input (also usable as external clock input, 8-24 MHz per the external clock characteristics); may be remapped to PD0. |
| 13 | OSC_OUT | output | External 4-16 MHz crystal oscillator output; may be remapped to PD1. |
| 14 | NRST | bidirectional | Active-low reset pin with weak pull-up (about 40 kΩ), with input low level 0.3*VDD maximum. |
| 15 | PC0 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC input ADC12_IN10. |
| 16 | PC1 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC input ADC12_IN11. |
| 17 | PC2 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC input ADC12_IN12. |
| 18 | PC3 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC input ADC12_IN13. |
| 19 | VSSA | power_in | Analog ground reference for the ADC, reset circuitry, RC oscillators and PLL. |
| 20 | VREF- | power_in | Negative reference voltage for the ADC. |
| 21 | VREF+ | power_in | Positive reference voltage for the ADC. |
| 22 | VDDA | power_in | Analog supply voltage, 1.8-5.5 V, which must always be greater than or equal to VDD and be powered first. |
| 23 | PA0-WKUP | bidirectional | General-purpose I/O with WKUP wake-up function, ADC12_IN0, USART2_CTS and TIM2_CH1_ETR alternate functions. |
| 24 | PA1 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN1, USART2_RTS and TIM2_CH2 alternate functions. |
| 25 | PA2 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN2, USART2_TX and TIM2_CH3 alternate functions. |
| 26 | PA3 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN3, USART2_RX and TIM2_CH4 alternate functions. |
| 27 | VSS_4 | power_in | Digital ground pin. |
| 28 | VDD_4 | power_in | Digital supply voltage pin, 1.8-5.5 V. |
| 29 | PA4 | bidirectional | General-purpose I/O (not 5 V tolerant) with SPI1_NSS, USART2_CK and ADC12_IN4 alternate functions. |
| 30 | PA5 | bidirectional | General-purpose I/O (not 5 V tolerant) with SPI1_SCK and ADC12_IN5 alternate functions. |
| 31 | PA6 | bidirectional | General-purpose I/O (not 5 V tolerant) with SPI1_MISO, ADC12_IN6, TIM3_CH1 and TIM1_BKIN alternate functions. |
| 32 | PA7 | bidirectional | General-purpose I/O (not 5 V tolerant) with SPI1_MOSI, ADC12_IN7, TIM3_CH2 and TIM1_CH1N alternate functions. |
| 33 | PC4 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN14 alternate function. |
| 34 | PC5 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN15 alternate function. |
| 35 | PB0 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN8, TIM3_CH3 and TIM1_CH2N alternate functions. |
| 36 | PB1 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN9, TIM3_CH4 and TIM1_CH3N alternate functions. |
| 37 | PB2 | bidirectional | Five-volt tolerant general-purpose I/O (FT), also associated with BOOT1 boot selection. |
| 38 | PE7 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_ETR alternate function. |
| 39 | PE8 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH1N alternate function. |
| 40 | PE9 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH1 alternate function. |
| 41 | PE10 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH2N alternate function. |
| 42 | PE11 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH2 alternate function. |
| 43 | PE12 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH3N alternate function. |
| 44 | PE13 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH3 alternate function. |
| 45 | PE14 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH4 alternate function. |
| 46 | PE15 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_BKIN alternate function. |
| 47 | PB10 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with I2C2_SCL, TIM2_CH3 and USART3_TX alternate functions. |
| 48 | PB11 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with I2C2_SDA, USART3_RX and TIM2_CH4 alternate functions. |
| 49 | VSS_1 | power_in | Digital ground pin. |
| 50 | VDD_1 | power_in | Digital supply voltage pin, 1.8-5.5 V. |
| 51 | PB12 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with SPI2_NSS, I2C2_SMBAL, USART3_CK and TIM1_BKIN alternate functions. |
| 52 | PB13 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with SPI2_SCK, USART3_CTS and TIM1_CH1N alternate functions. |
| 53 | PB14 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with SPI2_MISO, USART3_RTS and TIM1_CH2N alternate functions. |
| 54 | PB15 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with SPI2_MOSI and TIM1_CH3N alternate functions. |
| 55 | PD8 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_TX alternate function. |
| 56 | PD9 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_RX alternate function. |
| 57 | PD10 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_CK alternate function. |
| 58 | PD11 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_CTS alternate function. |
| 59 | PD12 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_CH1 and USART3_RTS alternate functions. |
| 60 | PD13 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_CH2 alternate function. |
| 61 | PD14 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_CH3 alternate function. |
| 62 | PD15 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_CH4 alternate function. |
| 63 | PC6 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM3_CH1 alternate function. |
| 64 | PC7 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM3_CH2 alternate function. |
| 65 | PC8 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM3_CH3 alternate function. |
| 66 | PC9 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM3_CH4 alternate function. |
| 67 | PA8 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART1_CK, TIM1_CH1 and MCO alternate functions. |
| 68 | PA9 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART1_TX and TIM1_CH2 alternate functions. |
| 69 | PA10 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART1_RX and TIM1_CH3 alternate functions. |
| 70 | PA11 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART1_CTS, CANRX, USBDM and TIM1_CH4 alternate functions. |
| 71 | PA12 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART1_RTS, CANTX, USBDP and TIM1_ETR alternate functions. |
| 72 | PA13 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with JTMS/SWDIO debug function. |
| 73 | NC | unconnected | Not connected pin on the LQFP100 package. |
| 74 | VSS_2 | power_in | Digital ground pin. |
| 75 | VDD_2 | power_in | Digital supply voltage pin, 1.8-5.5 V. |
| 76 | PA14 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with JTCK/SWCLK debug function. |
| 77 | PA15 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with JTDI, TIM2_CH1_ETR and SPI1_NSS alternate functions. |
| 78 | PC10 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_TX alternate function. |
| 79 | PC11 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_RX alternate function. |
| 80 | PC12 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_CK alternate function. |
| 81 | PD0 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with CANRX alternate function. |
| 82 | PD1 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with CANTX alternate function. |
| 83 | PD2 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM3_ETR alternate function. |
| 84 | PD3 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART2_CTS alternate function. |
| 85 | PD4 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART2_RTS alternate function. |
| 86 | PD5 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART2_TX alternate function. |
| 87 | PD6 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART2_RX alternate function. |
| 88 | PD7 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART2_CK alternate function. |
| 89 | PB3 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with JTDO/TRACESWO, TIM2_CH2 and SPI1_SCK alternate functions. |
| 90 | PB4 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with JNTRST, TIM3_CH1 and SPI1_MISO alternate functions. |
| 91 | PB5 | bidirectional | General-purpose I/O with I2C1_SMBAL, TIM3_CH2 and SPI1_MOSI alternate functions. |
| 92 | PB6 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with I2C1_SCL, TIM4_CH1 and USART1_TX alternate functions. |
| 93 | PB7 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with I2C1_SDA, TIM4_CH2 and USART1_RX alternate functions. |
| 94 | BOOT0 | input | Boot mode selection input that, with BOOT1 and the boot select option bits, selects user Flash, System Memory or SRAM boot at startup. |
| 95 | PB8 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_CH3, I2C1_SCL and CANRX alternate functions. |
| 96 | PB9 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_CH4, I2C1_SDA and CANTX alternate functions. |
| 97 | PE0 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_ETR alternate function. |
| 98 | PE1 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with no listed alternate function. |
| 99 | VSS_3 | power_in | Digital ground pin. |
| 100 | VDD_3 | power_in | Digital supply voltage pin, 1.8-5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Flashchip Microelectronics |
| Package | LQFP-100(14x14) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 100 |
CAD (KiCad official)
- Symbol:
FCM32F103VBT6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
fcm32f103vbt6-etched.step/fcm32f103vbt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fcm32f103vbt6.step/fcm32f103vbt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Flashchip Microelectronics datasheet (50 pp, sha256
afeb69aa679aa7c7, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FCM32F103VBT6
**Flashchip Microelectronics** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-100(14x14)
FCM32F103VBT6 from Flashchip Microelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | Five-volt tolerant general-purpose I/O (FT), default function PE2 with alternate function TRACECK. |
| 2 | PE3 | bidirectional | Five-volt tolerant general-purpose I/O (FT), default function PE3 with alternate function TRACED0. |
| 3 | PE4 | bidirectional | Five-volt tolerant general-purpose I/O (FT), default function PE4 with alternate function TRACED1. |
| 4 | PE5 | bidirectional | Five-volt tolerant general-purpose I/O (FT), default function PE5 with alternate function TRACED2. |
| 5 | PE6 | bidirectional | Five-volt tolerant general-purpose I/O (FT), default function PE6 with alternate function TRACED3. |
| 6 | NC | unconnected | Not connected pin on the LQFP100 package. |
| 7 | PC13 | bidirectional | General-purpose I/O with TAMPER-RTC function. |
| 8 | PC14 | bidirectional | General-purpose I/O, also used as OSC32_IN for the 32 kHz oscillator. |
| 9 | PC15 | bidirectional | General-purpose I/O, also used as OSC32_OUT for the 32 kHz oscillator. |
| 10 | NC | unconnected | Not connected pin on the LQFP100 package. |
| 11 | NC | unconnected | Not connected pin on the LQFP100 package. |
| 12 | OSC_IN | input | External 4-16 MHz crystal oscillator input (also usable as external clock input, 8-24 MHz per the external clock characteristics); may be remapped to PD0. |
| 13 | OSC_OUT | output | External 4-16 MHz crystal oscillator output; may be remapped to PD1. |
| 14 | NRST | bidirectional | Active-low reset pin with weak pull-up (about 40 kΩ), with input low level 0.3*VDD maximum. |
| 15 | PC0 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC input ADC12_IN10. |
| 16 | PC1 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC input ADC12_IN11. |
| 17 | PC2 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC input ADC12_IN12. |
| 18 | PC3 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC input ADC12_IN13. |
| 19 | VSSA | power_in | Analog ground reference for the ADC, reset circuitry, RC oscillators and PLL. |
| 20 | VREF- | power_in | Negative reference voltage for the ADC. |
| 21 | VREF+ | power_in | Positive reference voltage for the ADC. |
| 22 | VDDA | power_in | Analog supply voltage, 1.8-5.5 V, which must always be greater than or equal to VDD and be powered first. |
| 23 | PA0-WKUP | bidirectional | General-purpose I/O with WKUP wake-up function, ADC12_IN0, USART2_CTS and TIM2_CH1_ETR alternate functions. |
| 24 | PA1 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN1, USART2_RTS and TIM2_CH2 alternate functions. |
| 25 | PA2 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN2, USART2_TX and TIM2_CH3 alternate functions. |
| 26 | PA3 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN3, USART2_RX and TIM2_CH4 alternate functions. |
| 27 | VSS_4 | power_in | Digital ground pin. |
| 28 | VDD_4 | power_in | Digital supply voltage pin, 1.8-5.5 V. |
| 29 | PA4 | bidirectional | General-purpose I/O (not 5 V tolerant) with SPI1_NSS, USART2_CK and ADC12_IN4 alternate functions. |
| 30 | PA5 | bidirectional | General-purpose I/O (not 5 V tolerant) with SPI1_SCK and ADC12_IN5 alternate functions. |
| 31 | PA6 | bidirectional | General-purpose I/O (not 5 V tolerant) with SPI1_MISO, ADC12_IN6, TIM3_CH1 and TIM1_BKIN alternate functions. |
| 32 | PA7 | bidirectional | General-purpose I/O (not 5 V tolerant) with SPI1_MOSI, ADC12_IN7, TIM3_CH2 and TIM1_CH1N alternate functions. |
| 33 | PC4 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN14 alternate function. |
| 34 | PC5 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN15 alternate function. |
| 35 | PB0 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN8, TIM3_CH3 and TIM1_CH2N alternate functions. |
| 36 | PB1 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC12_IN9, TIM3_CH4 and TIM1_CH3N alternate functions. |
| 37 | PB2 | bidirectional | Five-volt tolerant general-purpose I/O (FT), also associated with BOOT1 boot selection. |
| 38 | PE7 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_ETR alternate function. |
| 39 | PE8 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH1N alternate function. |
| 40 | PE9 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH1 alternate function. |
| 41 | PE10 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH2N alternate function. |
| 42 | PE11 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH2 alternate function. |
| 43 | PE12 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH3N alternate function. |
| 44 | PE13 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH3 alternate function. |
| 45 | PE14 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_CH4 alternate function. |
| 46 | PE15 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM1_BKIN alternate function. |
| 47 | PB10 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with I2C2_SCL, TIM2_CH3 and USART3_TX alternate functions. |
| 48 | PB11 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with I2C2_SDA, USART3_RX and TIM2_CH4 alternate functions. |
| 49 | VSS_1 | power_in | Digital ground pin. |
| 50 | VDD_1 | power_in | Digital supply voltage pin, 1.8-5.5 V. |
| 51 | PB12 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with SPI2_NSS, I2C2_SMBAL, USART3_CK and TIM1_BKIN alternate functions. |
| 52 | PB13 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with SPI2_SCK, USART3_CTS and TIM1_CH1N alternate functions. |
| 53 | PB14 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with SPI2_MISO, USART3_RTS and TIM1_CH2N alternate functions. |
| 54 | PB15 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with SPI2_MOSI and TIM1_CH3N alternate functions. |
| 55 | PD8 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_TX alternate function. |
| 56 | PD9 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_RX alternate function. |
| 57 | PD10 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_CK alternate function. |
| 58 | PD11 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_CTS alternate function. |
| 59 | PD12 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_CH1 and USART3_RTS alternate functions. |
| 60 | PD13 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_CH2 alternate function. |
| 61 | PD14 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_CH3 alternate function. |
| 62 | PD15 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_CH4 alternate function. |
| 63 | PC6 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM3_CH1 alternate function. |
| 64 | PC7 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM3_CH2 alternate function. |
| 65 | PC8 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM3_CH3 alternate function. |
| 66 | PC9 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM3_CH4 alternate function. |
| 67 | PA8 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART1_CK, TIM1_CH1 and MCO alternate functions. |
| 68 | PA9 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART1_TX and TIM1_CH2 alternate functions. |
| 69 | PA10 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART1_RX and TIM1_CH3 alternate functions. |
| 70 | PA11 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART1_CTS, CANRX, USBDM and TIM1_CH4 alternate functions. |
| 71 | PA12 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART1_RTS, CANTX, USBDP and TIM1_ETR alternate functions. |
| 72 | PA13 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with JTMS/SWDIO debug function. |
| 73 | NC | unconnected | Not connected pin on the LQFP100 package. |
| 74 | VSS_2 | power_in | Digital ground pin. |
| 75 | VDD_2 | power_in | Digital supply voltage pin, 1.8-5.5 V. |
| 76 | PA14 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with JTCK/SWCLK debug function. |
| 77 | PA15 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with JTDI, TIM2_CH1_ETR and SPI1_NSS alternate functions. |
| 78 | PC10 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_TX alternate function. |
| 79 | PC11 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_RX alternate function. |
| 80 | PC12 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART3_CK alternate function. |
| 81 | PD0 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with CANRX alternate function. |
| 82 | PD1 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with CANTX alternate function. |
| 83 | PD2 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM3_ETR alternate function. |
| 84 | PD3 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART2_CTS alternate function. |
| 85 | PD4 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART2_RTS alternate function. |
| 86 | PD5 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART2_TX alternate function. |
| 87 | PD6 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART2_RX alternate function. |
| 88 | PD7 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with USART2_CK alternate function. |
| 89 | PB3 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with JTDO/TRACESWO, TIM2_CH2 and SPI1_SCK alternate functions. |
| 90 | PB4 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with JNTRST, TIM3_CH1 and SPI1_MISO alternate functions. |
| 91 | PB5 | bidirectional | General-purpose I/O with I2C1_SMBAL, TIM3_CH2 and SPI1_MOSI alternate functions. |
| 92 | PB6 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with I2C1_SCL, TIM4_CH1 and USART1_TX alternate functions. |
| 93 | PB7 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with I2C1_SDA, TIM4_CH2 and USART1_RX alternate functions. |
| 94 | BOOT0 | input | Boot mode selection input that, with BOOT1 and the boot select option bits, selects user Flash, System Memory or SRAM boot at startup. |
| 95 | PB8 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_CH3, I2C1_SCL and CANRX alternate functions. |
| 96 | PB9 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_CH4, I2C1_SDA and CANTX alternate functions. |
| 97 | PE0 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with TIM4_ETR alternate function. |
| 98 | PE1 | bidirectional | Five-volt tolerant general-purpose I/O (FT) with no listed alternate function. |
| 99 | VSS_3 | power_in | Digital ground pin. |
| 100 | VDD_3 | power_in | Digital supply voltage pin, 1.8-5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Flashchip Microelectronics |
| Package | LQFP-100(14x14) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 100 |
## CAD (KiCad official)
- Symbol: `FCM32F103VBT6`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `fcm32f103vbt6-etched.step` / `fcm32f103vbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fcm32f103vbt6.step` / `fcm32f103vbt6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Flashchip Microelectronics datasheet](docs/fcm32f103vbt6-datasheet.pdf) (50 pp, sha256 `afeb69aa679aa7c7`, retrieved 2026-10-28, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fcm32f103vbt6-datasheet.pdf)