main
Ray Publish 0.1.0 35460ca

FCM1005KF-750T06

TAI TECH · Ferrite Beads · 0402

FCM1005KF-750T06 from TAI TECH, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of an unpolarised inductor or ferrite bead; either orientation.
2 2 passive Terminal 2 of an unpolarised inductor or ferrite bead; either orientation.

Key specifications

Parameter Value
Manufacturer TAI TECH
Package 0402
Category Filters
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Impedance at test frequency (nominal) Z 75 Ω Test frequency 100 MHz, test voltage 60 mV 1
Impedance tolerance Z -25 25 % 75 Ω ±25%, at 100 MHz 1
DC resistance RDC 0.25 Ω 1
Rated current IR 600 mA Based on temperature rise test 1
Temperature rise at rated current ΔT 20 °C Rated current < 1 A, DC rated current applied 2
Operating temperature TOP -55 125 °C Including self-temperature rise 1
Storage temperature (transportation, on board) TSTG -55 125 °C On board 2
Life test impedance change Z -15 15 % 125±2°C, rated current, 1000±12 h; measured after 24±2 h at room temperature 2
Life test DC resistance change RDC -15 15 % 125±2°C, rated current, 1000±12 h; measured after 24±2 h at room temperature; also must not exceed specification value 2
Thermal shock impedance change Z -15 15 % 500 cycles, -55±2°C (30±5 min) to +125±2°C (30±5 min) 2
Vibration impedance change Z -15 15 % 10 Hz to 2 kHz to 10 Hz, 20 min per cycle, 12 h total in 3 orientations 2
Bending impedance change Z -10 10 % Bending depth 0.8 mm for <0805 (2012 mm) on 40x100x0.8 mm FR4, 10 s 2
Shock impedance change Z -10 10 % Half-sine, 50 g peak, 11 ms normal duration 2
Resistance to soldering heat impedance change Z -15 15 % 1 heat cycle, termination completely covered 3
Reflow soldering peak temperature TP 260 260 °C Lead-free reflow, 260±5 °C solder temperature, 10±1 s, max 3 reflow times 3
Iron soldering tip temperature 350 °C Iron soldering, tip temperature max, 1.0 mm tip diameter max, 4-5 s, 1 time max 4

CAD (KiCad official)

  • Symbol: FCM1005KF-750T06
  • Footprint: Inductor_SMD:L_0402_1005Metric
  • 3D model: 0402 (KiCad packages3D, STEP)
  • 3D model files: fcm1005kf-750t06-etched.step / fcm1005kf-750t06-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fcm1005kf-750t06.step / fcm1005kf-750t06.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TAI TECH datasheet (5 pp, sha256 e551b40dd1c11bc2, retrieved 2026-10-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF