component
FBC4067YSOT236G
Public Made by Adomby adom
Full Way Battery Management, SOT-23-6L. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownFBC4067YSOT236G
Full Way · Battery Management · SOT-23-6L
FBC4067YSOT236G from Full Way, in a SOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Open-drain charge status indicator. Pulled low internally while the charger is actively charging the battery; goes to high-impedance when charging ends. Typical VOL = 0.5V at ICHRG = 5mA; withstands up to 30V in high-Z state. Leave floating or tie to GND if unused. |
| 2 | GND | power_in | Device ground reference (电源地). Return path for VCC supply current and reference for PROG resistor. |
| 3 | VBAT | power_out | Battery positive terminal. Delivers charge current up to 500mA and regulates to the 4.2V float voltage. In standby (battery full) or with VCC absent, BAT leakage is <2μA. Absolute maximum voltage: -0.3V to 12V. Includes reverse-battery protection (~80μA at VBAT = -3.8V). |
| 4 | VCC | power_in | Charger input supply. Recommended operating range 4.5V-6.5V (typical 5.5V); absolute maximum 30V. OVP triggers at 7.3V (rising) with ~500mV hysteresis. Charging starts when VCC exceeds the UVLO threshold (~3.7V) AND is at least 100mV above VBAT; if VCC-VBAT drops below 50mV or VCC falls below UVLO, the device enters low-power shutdown (BAT draw = 0). |
| 5 | STDBY | output | Open-drain charge-complete indicator. Pulled low when the charge cycle terminates (drives an indicator LED on); high-impedance during charging. Typical VOL = 0.5V at ISTDBY = 5mA; withstands up to 30V in high-Z state. |
| 6 | PROG | input | Charge-current programming pin. Connect a resistor RPROG from PROG to GND to set constant-current charge level: IBAT = 1000V / RPROG (minimum RPROG = 2kΩ, giving 500mA). PROG regulates to ~0.1V in trickle mode and ~1.0V in constant-current mode; when its voltage falls below 100mV for >1.58ms the charger terminates (C/5 termination). Absolute maximum voltage 10V; maximum current 1mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Full Way |
| Package | SOT-23-6L |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
FBC4067YSOT236G/TR
CAD (KiCad official)
- Symbol:
FBC4067YSOT236G - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
fbc4067ysot236g-etched.step/fbc4067ysot236g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fbc4067ysot236g.step/fbc4067ysot236g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Full Way datasheet (7 pp, sha256
3d75ae5cb720460f, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).