component
FAN73893MX
Public Made by Adomby adom
onsemi Gate Drive ICs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.1
6 files changed
+852−844
README.md+64−63@@ -8,34 +8,34 @@ FAN73893MX from onsemi, in a SOIC-28-300mil. Pinout and pin descriptions extract | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VDD | power_in | Logic and low-side gate driver power supply voltage, recommended 10 V to 20 V (absolute max 25 V). |-| 2 | HIN1 | input | Logic input 1 for high-side gate 1 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up. |-| 3 | HIN2 | input | Logic input 2 for high-side gate 2 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up. |-| 4 | HIN3 | input | Logic input 3 for high-side gate 3 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up. |-| 5 | LIN1 | input | Logic input 1 for low-side gate 1 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up. |-| 6 | LIN2 | input | Logic input 2 for low-side gate 2 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up. |-| 7 | LIN3 | input | Logic input 3 for low-side gate 3 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up. |-| 8 | FO | output | Open-drain fault output indicating over-current and low-side under-voltage, pulled low until the fault clears and the fault-clear timer expires. |-| 9 | CS | input | Analog input for over-current shutdown, with 500 mV typical positive detect threshold and input range VSS to VSS + 5 V. |-| 10 | EN | input | Logic input for shutdown functionality, driver operates normally when high, with 150 kΩ typical pull-down and 250 ns typical input filter. |-| 11 | RCIN | passive | External RC network input used to define the fault-clear delay, tFLTCLR = CRCIN x 3.3 V / 5 µA. |-| 12 | VSS | power_in | Logic ground, reference for logic inputs, recommended -5 V to 5 V relative to COM. |-| 13 | COM | power_in | Low-side driver return (ground reference for the low-side outputs). |-| 14 | LO3 | output | Low-side gate driver 3 output, typically sources 350 mA and sinks 650 mA. |-| 15 | LO2 | output | Low-side gate driver 2 output, typically sources 350 mA and sinks 650 mA. |-| 16 | LO1 | output | Low-side gate driver 1 output, typically sources 350 mA and sinks 650 mA. |+| 1 | VDD | power_in | Logic and low-side gate driver power supply voltage, recommended 10 V to 20 V. |+| 2 | HIN1 | input | Logic input 1 for the high-side gate 1 driver, with recommended input range VSS to VSS + 5 V. |+| 3 | HIN2 | input | Logic input 2 for the high-side gate 2 driver, with recommended input range VSS to VSS + 5 V. |+| 4 | HIN3 | input | Logic input 3 for the high-side gate 3 driver, with recommended input range VSS to VSS + 5 V. |+| 5 | LIN1 | input | Logic input 1 for the low-side gate 1 driver, with recommended input range VSS to VSS + 5 V. |+| 6 | LIN2 | input | Logic input 2 for the low-side gate 2 driver, with recommended input range VSS to VSS + 5 V. |+| 7 | LIN3 | input | Logic input 3 for the low-side gate 3 driver, with recommended input range VSS to VSS + 5 V. |+| 8 | FO | output | Open-drain fault output that indicates over-current and low-side under-voltage shutdown; its voltage must not exceed VDD + 0.3 V. |+| 9 | CS | input | Analog input for over-current shutdown, with the over-current detect positive threshold of 450 mV to 550 mV (500 mV typical). |+| 10 | EN | input | Logic input for shutdown functionality; the gate driver operates normally when EN is high, with a positive-going threshold of at least 2.5 V and a negative-going threshold of at most 0.8 V. |+| 11 | RCIN | passive | External RC network input that defines the fault-clear delay, using an internal 5 µA current source and a 3.3 V typical positive-going threshold. |+| 12 | VSS | power_in | Logic ground, which is the reference for the logic inputs and EN, with recommended range −5 V to 5 V. |+| 13 | COM | power_in | Low-side driver return, to which the LO1, LO2 and LO3 outputs are referenced. |+| 14 | LO3 | output | Low-side gate driver 3 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA. |+| 15 | LO2 | output | Low-side gate driver 2 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA. |+| 16 | LO1 | output | Low-side gate driver 1 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA. | | 17 | NC | unconnected | No connect. |-| 18 | VS3 | passive | High-side driver 3 floating supply offset voltage, up to 600 V recommended. |-| 19 | HO3 | output | High-side driver 3 gate driver output, typically sources 350 mA and sinks 650 mA. |-| 20 | VB3 | power_in | High-side driver 3 floating supply, VS3 + 10 V to VS3 + 20 V recommended, absolute max 625 V. |+| 18 | VS3 | power_in | High-side driver 3 floating supply offset voltage, with absolute maximum range VB3 − 25 V to VB3 + 0.3 V. |+| 19 | HO3 | output | High-side driver 3 gate driver output, referenced to VS3 and driven between VS3 and VB3. |+| 20 | VB3 | power_in | High-side driver 3 floating supply, recommended at VS3 + 10 V to VS3 + 20 V and absolute maximum up to 625 V. | | 21 | NC | unconnected | No connect. |-| 22 | VS2 | passive | High-side driver 2 floating supply offset voltage, up to 600 V recommended. |-| 23 | HO2 | output | High-side driver 2 gate driver output, typically sources 350 mA and sinks 650 mA. |-| 24 | VB2 | power_in | High-side driver 2 floating supply, VS2 + 10 V to VS2 + 20 V recommended, absolute max 625 V. |+| 22 | VS2 | power_in | High-side driver 2 floating supply offset voltage, with absolute maximum range VB2 − 25 V to VB2 + 0.3 V. |+| 23 | HO2 | output | High-side driver 2 gate driver output, referenced to VS2 and driven between VS2 and VB2. |+| 24 | VB2 | power_in | High-side driver 2 floating supply, recommended at VS2 + 10 V to VS2 + 20 V and absolute maximum up to 625 V. | | 25 | NC | unconnected | No connect. |-| 26 | VS1 | passive | High-side driver 1 floating supply offset voltage, up to 600 V recommended. |-| 27 | HO1 | output | High-side driver 1 gate driver output, typically sources 350 mA and sinks 650 mA. |-| 28 | VB1 | power_in | High-side driver 1 floating supply, VS1 + 10 V to VS1 + 20 V recommended, absolute max 625 V. |+| 26 | VS1 | power_in | High-side driver 1 floating supply offset voltage, with absolute maximum range VB1 − 25 V to VB1 + 0.3 V. |+| 27 | HO1 | output | High-side driver 1 gate driver output, referenced to VS1 and driven between VS1 and VB1. |+| 28 | VB1 | power_in | High-side driver 1 floating supply, recommended at VS1 + 10 V to VS1 + 20 V and absolute maximum up to 625 V. | ## Key specifications @@ -52,50 +52,51 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| High-Side Floating Supply Voltage | VB | -0.3 | | 625 | V | TA = 25°C | 4 |-| Low-Side and Logic-Fixed supply voltage | VDD | -0.3 | | 25 | V | TA = 25°C | 4 |-| Low-Side Floating Output Voltage (min only; max is VDD + 0.3) | VLO | -0.3 | | | V | TA = 25°C | 4 |-| Allowable Offset Voltage Slew Rate | dVS/dt | -50 | | 50 | V/ns | | 4 |-| Power Dissipation | PD | | | 1.4 | W | Note 2, 3 | 4 |-| Thermal Resistance | θJA | | | 70 | °C/W | Note 2 | 4 |-| Junction Temperature | TJ | | | 150 | °C | | 4 |-| Storage Temperature | TSTG | -55 | | 150 | °C | | 4 |-| High-Side Floating Supply Offset Voltage (max) | VS1,2,3 | | | 600 | V | min is 6 - VDD | 4 |-| Low-Side and Logic Fixed Supply Voltage | VDD | 10 | | 20 | V | | 4 |-| Logic Ground | VSS | -5 | | 5 | V | | 4 |-| Ambient Temperature | TA | -40 | | 125 | °C | | 4 |-| Quiescent VDD Supply Current | IQDD | | 250 | 400 | µA | VLIN1,2,3 = 5 V or open, EN = 0 V | 5 |-| Operating VDD Supply Current | IPDD | | 550 | 750 | µA | fLIN1,2,3 = 20 kHz, rms Value | 5 |+| VS1,2,3 High-Side Floating Supply Offset Voltage | VS1,2,3 | | | 600 | V | | 4 |+| VDD Low-Side and Logic Fixed Supply Voltage | VDD | 10 | | 20 | V | | 4 |+| VSS Logic Ground | VSS | -5 | | 5 | V | | 4 |+| TA Ambient Temperature | TA | -40 | | 125 | °C | | 4 |+| VB High-Side Floating Supply Voltage | VB | -0.3 | | 625 | V | | 4 |+| VDD Low-Side and Logic-Fixed supply voltage | VDD | -0.3 | | 25 | V | | 4 |+| VLO Low-Side Floating Output Voltage | VLO | -0.3 | | | V | | 4 |+| VFO Fault Output Voltage (FO) | VFO | -0.3 | | | V | | 4 |+| dVS/dt Allowable Offset Voltage Slew Rate | dVS/dt | -50 | | 50 | V/ns | | 4 |+| PD Power Dissipation | PD | | | 1.4 | W | Note 2, 3 | 4 |+| JA Thermal Resistance | JA | | | 70 | °C/W | | 4 |+| TJ Junction Temperature | TJ | | | 150 | °C | | 4 |+| TSTG Storage Temperature | TSTG | -55 | | 150 | °C | | 4 |+| Quiescent VDD Supply Current | IQDD | | 250 | 400 | A | VLIN1,2,3 = 5 V or open, EN = 0 V | 5 |+| Operating VDD Supply Current | IPDD | | 550 | 750 | A | fLIN1,2,3 = 20 kHz, rms Value | 5 | | VDD Supply Under-Voltage Positive-Going Threshold | VDDUV+ | 7.5 | 8.5 | 9.3 | V | VDD = Sweep | 5 |-| VDD Supply Under-Voltage Negative-Going Threshold | VDDUV- | 7 | 8 | 8.7 | V | VDD = Sweep | 5 |+| VDD Supply Under-Voltage Negative-Going Threshold | VDDUV− | 7 | 8 | 8.7 | V | VDD = Sweep | 5 | | VBS Supply Under-Voltage Positive-Going Threshold | VBSUV+ | 7.5 | 8.5 | 9.3 | V | VBS1,2,3 = Sweep | 5 |-| VBS Supply Under-Voltage Negative-Going Threshold | VBSUV- | 7 | 8 | 8.7 | V | VBS1,2,3 = Sweep | 5 |-| Offset Supply Leakage Current | ILK | | | 10 | µA | VB1,2,3 = VS1,2,3 = 600 V | 5 |-| Quiescent VBS Supply Current | IQBS | 10 | 50 | 80 | µA | VHIN1,2,3 = 0 V or 5 V, EN = 0 V | 5 |-| Operating VBS Supply Current | IPBS | 200 | 320 | 480 | µA | fHIN1,2,3 = 20 kHz, rms Value | 5 |-| High-Level Output voltage, VBIAS - VO | VOH | | | 100 | mV | IO = 0 mA (No Load) | 5 |+| VBS Supply Under-Voltage Negative-Going Threshold | VBSUV− | 7 | 8 | 8.7 | V | VBS1,2,3 = Sweep | 5 |+| Offset Supply Leakage Current | ILK | | | 10 | A | VB1,2,3 = VS1,2,3 = 600 V | 5 |+| Quiescent VBS Supply Current | IQBS | 10 | 50 | 80 | A | VHIN1,2,3 = 0 V or 5 V, EN = 0 V | 5 |+| Operating VBS Supply Current | IPBS | 200 | 320 | 480 | A | fHIN1,2,3 = 20 kHz, rms Value | 5 |+| High-Level Output voltage, VBIAS − VO | VOH | | | 100 | mV | IO = 0 mA (No Load) | 5 | | Low-Level Output voltage, VO | VOL | | | 100 | mV | IO = 0 mA (No Load) | 5 |-| Output HIGH Short-Circuit Pulse Current | IO+ | 250 | 350 | | mA | VO = 0 V, VIN = 0 V with PW ≤ 10 µs (Note 4) | 5 |-| Output LOW Short-Circuit Pulsed Current | IO- | 500 | 650 | | mA | VO = 15 V, VIN = 5 V with PW ≤ 10 µs (Note 4) | 5 |+| Output HIGH Short-Circuit Pulse Current | IO+ | 250 | 350 | | mA | VO = 0 V, VIN = 0 V with PW ≤ 10 s | 5 |+| Output LOW Short-Circuit Pulsed Current | IO− | 500 | 650 | | mA | VO = 15 V, VIN = 5 V with PW ≤ 10 s | 5 | | Allowable Negative VS Pin Voltage for HIN Signal Propagation to HO | VS | | -9.8 | -9 | V | | 5 |-| Logic "0" Input Voltage | VIH | 2.5 | | | V | HIN1,2,3, LIN1,2,3 | 5 |-| Logic "1" Input Voltage | VIL | | | 0.8 | V | HIN1,2,3, LIN1,2,3 | 5 |-| Logic Input Bias Current (HO = LO = HIGH) | IIN+ | 77 | 100 | 143 | µA | VIN = 0 V | 5 |-| Logic Input Bias Current (HO = LO = LOW) | IIN- | | 8.5 | 25 | µA | VIN = 5 V | 5 |-| Logic Input Pull-Up Resistance | RIN | 35 | 50 | 65 | kΩ | | 5 |+| Logic “0” Input Voltage | VIH | 2.5 | | | V | HIN1,2,3, LIN1,2,3 | 5 |+| Logic “1” Input Voltage | VIL | | | 0.8 | V | HIN1,2,3, LIN1,2,3 | 5 |+| Logic Input Bias Current (HO = LO = HIGH) | IIN+ | 77 | 100 | 143 | A | VIN = 0 V | 5 |+| Logic Input Bias Current (HO = LO = LOW) | IIN− | | 8.5 | 25 | A | VIN = 5 V | 5 |+| Logic Input Pull-Up Resistance | RIN | 35 | 50 | 65 | k | | 5 | | Enable Positive-Going Threshold Voltage | VEN+ | 2.5 | | | V | | 5 |-| Enable Negative-Going Threshold Voltage | VEN- | | | 0.8 | V | | 5 |-| Logic Enable "1" Input Bias Current | IEN+ | 15 | 33 | 50 | µA | VEN = 5 V (Pull-Down = 150 kΩ) | 5 |-| Logic Enable "0" Input Bias Current | IEN- | | | 2 | µA | VEN = 0 V | 5 |-| Logic Input Pull-Down Resistance | REN | 100 | 150 | 333 | kΩ | | 5 |+| Enable Negative-Going Threshold Voltage | VEN− | | | 0.8 | V | | 5 |+| Logic Enable “1” Input Bias Current | IEN+ | 15 | 33 | 50 | A | VEN = 5 V (Pull-Down = 150 k) | 5 |+| Logic Enable “0” Input Bias Current | IEN− | | | 2 | A | VEN = 0 V | 5 |+| Logic Input Pull-Down Resistance | REN | 100 | 150 | 333 | k | | 5 | | Over-Current Detect Positive Threshold | VCSTH+ | 450 | 500 | 550 | mV | | 5 |-| Short-Circuit Input Current | ICSIN | 5 | 10 | 15 | µA | VCSIN = 1 V | 5 |+| Short-Circuit Input Current | ICSIN | 5 | 10 | 15 | A | VCSIN = 1 V | 5 | | Soft Turn-Off Sink Current | ISOFT | 25 | 40 | 55 | mA | | 5 | | RCIN Positive-Going Threshold Voltage | VRCINTH+ | 2.7 | 3.3 | 3.9 | V | | 6 |-| RCIN Internal Current Source | IRCIN | 3 | 5 | 7 | µA | CRCIN = 2 nF | 6 |+| RCIN Internal Current Source | IRCIN | 3 | 5 | 7 | A | CRCIN = 2 nF | 6 | | Fault Output Low Level Voltage | VFOL | | 0.2 | 0.5 | V | VCS = 1 V, IFO = 1.5 mA | 6 |-| RCIN On Resistance | RDSRCIN | 50 | 75 | 100 | Ω | IRCIN = 1.5 mA | 6 |-| Fault Output On Resistance | RDSFO | 90 | 130 | 170 | Ω | IFO = 1.5 mA | 6 |+| RCIN On Resistance | RDSRCIN | 50 | 75 | 100 | | IRCIN = 1.5 mA | 6 |+| Fault Output On Resistance | RDSFO | 90 | 130 | 170 | | IFO = 1.5 mA | 6 | | Turn-On Propagation Delay | tON | 350 | 500 | 650 | ns | VLIN1,2,3 = VHIN1,2,3 = 0 V, VS1,2,3 = 0 V | 6 | | Turn-Off Propagation Delay | tOFF | 350 | 500 | 650 | ns | VLIN1,2,3 = VHIN1,2,3 = 5 V, VS1,2,3 = 0 V | 6 | | Turn-On Rise Time | tR | 20 | 50 | 100 | ns | VLIN1,2,3 = VHIN1,2,3 = 0 V | 6 |@@ -104,12 +105,12 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | CS Pin Leading-Edge Blanking Time | tCSBLT | 400 | 650 | 850 | ns | | 6 | | Time from CS Triggering to FO | tCSFO | | 850 | 1300 | ns | From VCSC = 1 V to FO Turn-Off | 6 | | Time from CS Triggering to Low-Side Gate Outputs Turn-Off | tCSOFF | | 850 | 1300 | ns | From VCSC = 1 V to Starting Gate Turn-Off | 6 |-| Input Filtering Time | tFLTIN | 170 | 250 | 330 | ns | HINx, LINx, EN (Note 5) | 6 |+| Input Filtering Time (Note 5) | tFLTIN | 170 | 250 | 330 | ns | HINx, LINx, EN | 6 | | Fault-Clear Time | tFLTCLR | | 1.3 | 2.35 | ms | CRCIN = 2 nF | 6 | | Dead Time | DT | 230 | 320 | 400 | ns | | 6 | | Dead-Time Matching (All Six Channels) | MDT | | | 50 | ns | | 6 | | Delay Matching (All Six Channels) | MT | | | 50 | ns | | 6 |-| Output Pulse-Width Matching | PM | | 50 | 100 | ns | PWIN > 1 µs (Note 6) | 6 |+| Output Pulse-Width Matching (Note 6) | PM | | 50 | 100 | ns | PWIN > 1 s | 6 | ## CAD (KiCad official) @@ -123,7 +124,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: - **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/fan73893mx-d.pdf) (17 pp, sha256 `14ce477b0a381e15`, retrieved 2026-11-12, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). [Datasheet PDF](docs/fan73893mx-datasheet.pdf)
fan73893mx-hero.overlay.json+703−698@@ -1,700 +1,705 @@ {- "spec": "adom-hero 1.4",- "mpn": "FAN73893MX",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 28,- "span_mm": 17.11,- "dash_mm": 0.4278,- "gap_mm": 0.2567,- "pad_stroke_mm": 0.09- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 7,- "pin1": {- "source": "footprint silkscreen",- "pad": "1"- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 28,- "sides": "top + mirrored underside (single-sided)",- "fallback_to_pad_number": 0- }- },- "align": {- "ok": true,- "centre_offset_mm": 0.0,- "tolerance_mm": 1.369,- "orientation_flipped": false,- "contacts_bbox_mm": [- -5.15,- 5.15,- -8.461,- 8.461- ],- "pads_bbox_mm": [- -5.675,- 5.675,- -8.555,- 8.555- ],- "seating_z_mm": 0.001- },- "sources": {- "glb": "fan73893mx-etched.glb",- "glb_sha256": "f1032fc3291fa299b6494f0a15fb45a479b3aa82865f5a9d24c39c5b098effb7",- "footprint": "fan73893mx.kicad_mod",- "footprint_sha256": "8df054b2353cacbe8e7228f97eacdd863eeebcfe7dc3a6315ee2deb370496519",- "pins": "page.json component.pins",- "pins_sha256": "0770d9bcaaf7fa99b0097332fc5af11dfc94583e3c5c5e6c9f7fc3828fc8fd98"- },- "generator": "adom-wiki 1.8.22 (component_hero)",- "labels": [- {- "pad": "1",- "text": "VDD",- "x": -5.825,- "y": -8.255,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "2",- "text": "HIN1",- "x": -5.825,- "y": -6.985,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "3",- "text": "HIN2",- "x": -5.825,- "y": -5.715,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "4",- "text": "HIN3",- "x": -5.825,- "y": -4.445,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "5",- "text": "LIN1",- "x": -5.825,- "y": -3.175,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "6",- "text": "LIN2",- "x": -5.825,- "y": -1.905,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "7",- "text": "LIN3",- "x": -5.825,- "y": -0.635,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "8",- "text": "FO",- "x": -5.825,- "y": 0.635,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "9",- "text": "CS",- "x": -5.825,- "y": 1.905,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "10",- "text": "EN",- "x": -5.825,- "y": 3.175,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "11",- "text": "RCIN",- "x": -5.825,- "y": 4.445,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "12",- "text": "VSS",- "x": -5.825,- "y": 5.715,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "13",- "text": "COM",- "x": -5.825,- "y": 6.985,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "14",- "text": "LO3",- "x": -5.825,- "y": 8.255,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "15",- "text": "LO2",- "x": 5.825,- "y": 8.255,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "16",- "text": "LO1",- "x": 5.825,- "y": 6.985,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "17",- "text": "NC",- "x": 5.825,- "y": 5.715,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "18",- "text": "VS3",- "x": 5.825,- "y": 4.445,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "19",- "text": "HO3",- "x": 5.825,- "y": 3.175,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "20",- "text": "VB3",- "x": 5.825,- "y": 1.905,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "21",- "text": "NC",- "x": 5.825,- "y": 0.635,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "22",- "text": "VS2",- "x": 5.825,- "y": -0.635,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "23",- "text": "HO2",- "x": 5.825,- "y": -1.905,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "24",- "text": "VB2",- "x": 5.825,- "y": -3.175,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "25",- "text": "NC",- "x": 5.825,- "y": -4.445,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "26",- "text": "VS1",- "x": 5.825,- "y": -5.715,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "27",- "text": "HO1",- "x": 5.825,- "y": -6.985,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "28",- "text": "VB1",- "x": 5.825,- "y": -8.255,- "align": "left",- "vertical": false,- "h": 0.6- }+ "spec": "adom-hero 1.4",+ "mpn": "FAN73893MX",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 28,+ "span_mm": 17.11,+ "dash_mm": 0.4278,+ "gap_mm": 0.2567,+ "pad_stroke_mm": 0.09+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 28,+ "sides": "top + mirrored underside (single-sided)",+ "omitted": null,+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "board_underside": true,+ "electrical_pads_without_contact": [],+ "mounting_pads_left_out": [],+ "centre_offset_mm": 0.0,+ "over_pads": true,+ "tolerance_mm": 1.369,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -5.15,+ 5.15,+ -8.461,+ 8.461 ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- -4.65,- -8.255- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "2",- "shape": "roundrect",- "center_mm": [- -4.65,- -6.985- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "3",- "shape": "roundrect",- "center_mm": [- -4.65,- -5.715- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "4",- "shape": "roundrect",- "center_mm": [- -4.65,- -4.445- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "5",- "shape": "roundrect",- "center_mm": [- -4.65,- -3.175- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "6",- "shape": "roundrect",- "center_mm": [- -4.65,- -1.905- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "7",- "shape": "roundrect",- "center_mm": [- -4.65,- -0.635- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "8",- "shape": "roundrect",- "center_mm": [- -4.65,- 0.635- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "9",- "shape": "roundrect",- "center_mm": [- -4.65,- 1.905- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "10",- "shape": "roundrect",- "center_mm": [- -4.65,- 3.175- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "11",- "shape": "roundrect",- "center_mm": [- -4.65,- 4.445- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "12",- "shape": "roundrect",- "center_mm": [- -4.65,- 5.715- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "13",- "shape": "roundrect",- "center_mm": [- -4.65,- 6.985- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "14",- "shape": "roundrect",- "center_mm": [- -4.65,- 8.255- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "15",- "shape": "roundrect",- "center_mm": [- 4.65,- 8.255- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "16",- "shape": "roundrect",- "center_mm": [- 4.65,- 6.985- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "17",- "shape": "roundrect",- "center_mm": [- 4.65,- 5.715- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "18",- "shape": "roundrect",- "center_mm": [- 4.65,- 4.445- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "19",- "shape": "roundrect",- "center_mm": [- 4.65,- 3.175- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "20",- "shape": "roundrect",- "center_mm": [- 4.65,- 1.905- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "21",- "shape": "roundrect",- "center_mm": [- 4.65,- 0.635- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "22",- "shape": "roundrect",- "center_mm": [- 4.65,- -0.635- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "23",- "shape": "roundrect",- "center_mm": [- 4.65,- -1.905- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "24",- "shape": "roundrect",- "center_mm": [- 4.65,- -3.175- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "25",- "shape": "roundrect",- "center_mm": [- 4.65,- -4.445- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "26",- "shape": "roundrect",- "center_mm": [- 4.65,- -5.715- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "27",- "shape": "roundrect",- "center_mm": [- 4.65,- -6.985- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "28",- "shape": "roundrect",- "center_mm": [- 4.65,- -8.255- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- }- ]-}+ "pads_bbox_mm": [+ -5.675,+ 5.675,+ -8.555,+ 8.555+ ],+ "seating_z_mm": 0.001+ },+ "sources": {+ "glb": "fan73893mx-etched.glb",+ "glb_sha256": "f1032fc3291fa299b6494f0a15fb45a479b3aa82865f5a9d24c39c5b098effb7",+ "footprint": "fan73893mx.kicad_mod",+ "footprint_sha256": "8df054b2353cacbe8e7228f97eacdd863eeebcfe7dc3a6315ee2deb370496519",+ "pins": "page.json component.pins",+ "pins_sha256": "0770d9bcaaf7fa99b0097332fc5af11dfc94583e3c5c5e6c9f7fc3828fc8fd98"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+ {+ "pad": "1",+ "text": "VDD",+ "x": -5.825,+ "y": -8.255,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "HIN1",+ "x": -5.825,+ "y": -6.985,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "HIN2",+ "x": -5.825,+ "y": -5.715,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "HIN3",+ "x": -5.825,+ "y": -4.445,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "LIN1",+ "x": -5.825,+ "y": -3.175,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "LIN2",+ "x": -5.825,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "LIN3",+ "x": -5.825,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "FO",+ "x": -5.825,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "9",+ "text": "CS",+ "x": -5.825,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "10",+ "text": "EN",+ "x": -5.825,+ "y": 3.175,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "11",+ "text": "RCIN",+ "x": -5.825,+ "y": 4.445,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "12",+ "text": "VSS",+ "x": -5.825,+ "y": 5.715,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "13",+ "text": "COM",+ "x": -5.825,+ "y": 6.985,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "14",+ "text": "LO3",+ "x": -5.825,+ "y": 8.255,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "15",+ "text": "LO2",+ "x": 5.825,+ "y": 8.255,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "16",+ "text": "LO1",+ "x": 5.825,+ "y": 6.985,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "17",+ "text": "NC",+ "x": 5.825,+ "y": 5.715,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "18",+ "text": "VS3",+ "x": 5.825,+ "y": 4.445,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "19",+ "text": "HO3",+ "x": 5.825,+ "y": 3.175,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "20",+ "text": "VB3",+ "x": 5.825,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "21",+ "text": "NC",+ "x": 5.825,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "22",+ "text": "VS2",+ "x": 5.825,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "23",+ "text": "HO2",+ "x": 5.825,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "24",+ "text": "VB2",+ "x": 5.825,+ "y": -3.175,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "25",+ "text": "NC",+ "x": 5.825,+ "y": -4.445,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "26",+ "text": "VS1",+ "x": 5.825,+ "y": -5.715,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "27",+ "text": "HO1",+ "x": 5.825,+ "y": -6.985,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "28",+ "text": "VB1",+ "x": 5.825,+ "y": -8.255,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -8.255+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -6.985+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -5.715+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -4.445+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -3.175+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -1.905+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -0.635+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 0.635+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 1.905+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 3.175+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 4.445+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 5.715+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 6.985+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 8.255+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 8.255+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 6.985+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 5.715+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 4.445+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 3.175+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 1.905+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 0.635+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "22",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -0.635+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "23",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -1.905+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "24",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -3.175+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "25",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -4.445+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "26",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -5.715+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "27",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -6.985+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "28",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -8.255+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
fan73893mx.kicad_sym+3−3@@ -72,7 +72,7 @@ (name "HO1" (effects (font (size 1.27 1.27)))) (number "27" (effects (font (size 1.27 1.27)))) )- (pin passive line (at 17.78 10.16 180) (length 5.08)+ (pin power_in line (at 17.78 10.16 180) (length 5.08) (name "VS1" (effects (font (size 1.27 1.27)))) (number "26" (effects (font (size 1.27 1.27)))) )@@ -88,7 +88,7 @@ (name "HO2" (effects (font (size 1.27 1.27)))) (number "23" (effects (font (size 1.27 1.27)))) )- (pin passive line (at 17.78 0.00 180) (length 5.08)+ (pin power_in line (at 17.78 0.00 180) (length 5.08) (name "VS2" (effects (font (size 1.27 1.27)))) (number "22" (effects (font (size 1.27 1.27)))) )@@ -104,7 +104,7 @@ (name "HO3" (effects (font (size 1.27 1.27)))) (number "19" (effects (font (size 1.27 1.27)))) )- (pin passive line (at 17.78 -10.16 180) (length 5.08)+ (pin power_in line (at 17.78 -10.16 180) (length 5.08) (name "VS3" (effects (font (size 1.27 1.27)))) (number "18" (effects (font (size 1.27 1.27)))) )
fan73893mx.lbr+3−3@@ -129,15 +129,15 @@ <pin name="LO3" x="-17.78" y="-17.78" length="middle" direction="out"/> <pin name="VB1" x="17.78" y="15.24" length="middle" direction="pwr" rot="R180"/> <pin name="HO1" x="17.78" y="12.7" length="middle" direction="out" rot="R180"/>- <pin name="VS1" x="17.78" y="10.16" length="middle" direction="pas" rot="R180"/>+ <pin name="VS1" x="17.78" y="10.16" length="middle" direction="pwr" rot="R180"/> <pin name="NC" x="17.78" y="7.62" length="middle" direction="nc" rot="R180"/> <pin name="VB2" x="17.78" y="5.08" length="middle" direction="pwr" rot="R180"/> <pin name="HO2" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>- <pin name="VS2" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>+ <pin name="VS2" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/> <pin name="NC@2" x="17.78" y="-2.54" length="middle" direction="nc" rot="R180"/> <pin name="VB3" x="17.78" y="-5.08" length="middle" direction="pwr" rot="R180"/> <pin name="HO3" x="17.78" y="-7.62" length="middle" direction="out" rot="R180"/>- <pin name="VS3" x="17.78" y="-10.16" length="middle" direction="pas" rot="R180"/>+ <pin name="VS3" x="17.78" y="-10.16" length="middle" direction="pwr" rot="R180"/> <pin name="NC@3" x="17.78" y="-12.7" length="middle" direction="nc" rot="R180"/> <pin name="LO1" x="17.78" y="-15.24" length="middle" direction="out" rot="R180"/> <pin name="LO2" x="17.78" y="-17.78" length="middle" direction="out" rot="R180"/>
package.json+38−38@@ -1,6 +1,6 @@ { "slug": "fan73893mx",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "onsemi Gate Drive ICs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -54,7 +54,7 @@ "mouser": "512-FAN73893MX" }, "distributor_check": {- "checked_at": "2026-11-12T04:58:37Z",+ "checked_at": "2026-11-12T08:02:33Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "2832-FAN73893MXTR-ND",@@ -70,97 +70,97 @@ "number": "1", "name": "VDD", "type": "power_in",- "description": "Logic and low-side gate driver power supply voltage, recommended 10 V to 20 V (absolute max 25 V)."+ "description": "Logic and low-side gate driver power supply voltage, recommended 10 V to 20 V." }, { "number": "2", "name": "HIN1", "type": "input",- "description": "Logic input 1 for high-side gate 1 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up."+ "description": "Logic input 1 for the high-side gate 1 driver, with recommended input range VSS to VSS + 5 V." }, { "number": "3", "name": "HIN2", "type": "input",- "description": "Logic input 2 for high-side gate 2 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up."+ "description": "Logic input 2 for the high-side gate 2 driver, with recommended input range VSS to VSS + 5 V." }, { "number": "4", "name": "HIN3", "type": "input",- "description": "Logic input 3 for high-side gate 3 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up."+ "description": "Logic input 3 for the high-side gate 3 driver, with recommended input range VSS to VSS + 5 V." }, { "number": "5", "name": "LIN1", "type": "input",- "description": "Logic input 1 for low-side gate 1 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up."+ "description": "Logic input 1 for the low-side gate 1 driver, with recommended input range VSS to VSS + 5 V." }, { "number": "6", "name": "LIN2", "type": "input",- "description": "Logic input 2 for low-side gate 2 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up."+ "description": "Logic input 2 for the low-side gate 2 driver, with recommended input range VSS to VSS + 5 V." }, { "number": "7", "name": "LIN3", "type": "input",- "description": "Logic input 3 for low-side gate 3 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up."+ "description": "Logic input 3 for the low-side gate 3 driver, with recommended input range VSS to VSS + 5 V." }, { "number": "8", "name": "FO", "type": "output",- "description": "Open-drain fault output indicating over-current and low-side under-voltage, pulled low until the fault clears and the fault-clear timer expires."+ "description": "Open-drain fault output that indicates over-current and low-side under-voltage shutdown; its voltage must not exceed VDD + 0.3 V." }, { "number": "9", "name": "CS", "type": "input",- "description": "Analog input for over-current shutdown, with 500 mV typical positive detect threshold and input range VSS to VSS + 5 V."+ "description": "Analog input for over-current shutdown, with the over-current detect positive threshold of 450 mV to 550 mV (500 mV typical)." }, { "number": "10", "name": "EN", "type": "input",- "description": "Logic input for shutdown functionality, driver operates normally when high, with 150 kΩ typical pull-down and 250 ns typical input filter."+ "description": "Logic input for shutdown functionality; the gate driver operates normally when EN is high, with a positive-going threshold of at least 2.5 V and a negative-going threshold of at most 0.8 V." }, { "number": "11", "name": "RCIN", "type": "passive",- "description": "External RC network input used to define the fault-clear delay, tFLTCLR = CRCIN x 3.3 V / 5 µA."+ "description": "External RC network input that defines the fault-clear delay, using an internal 5 µA current source and a 3.3 V typical positive-going threshold." }, { "number": "12", "name": "VSS", "type": "power_in",- "description": "Logic ground, reference for logic inputs, recommended -5 V to 5 V relative to COM."+ "description": "Logic ground, which is the reference for the logic inputs and EN, with recommended range −5 V to 5 V." }, { "number": "13", "name": "COM", "type": "power_in",- "description": "Low-side driver return (ground reference for the low-side outputs)."+ "description": "Low-side driver return, to which the LO1, LO2 and LO3 outputs are referenced." }, { "number": "14", "name": "LO3", "type": "output",- "description": "Low-side gate driver 3 output, typically sources 350 mA and sinks 650 mA."+ "description": "Low-side gate driver 3 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA." }, { "number": "15", "name": "LO2", "type": "output",- "description": "Low-side gate driver 2 output, typically sources 350 mA and sinks 650 mA."+ "description": "Low-side gate driver 2 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA." }, { "number": "16", "name": "LO1", "type": "output",- "description": "Low-side gate driver 1 output, typically sources 350 mA and sinks 650 mA."+ "description": "Low-side gate driver 1 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA." }, { "number": "17",@@ -171,20 +171,20 @@ { "number": "18", "name": "VS3",- "type": "passive",- "description": "High-side driver 3 floating supply offset voltage, up to 600 V recommended."+ "type": "power_in",+ "description": "High-side driver 3 floating supply offset voltage, with absolute maximum range VB3 − 25 V to VB3 + 0.3 V." }, { "number": "19", "name": "HO3", "type": "output",- "description": "High-side driver 3 gate driver output, typically sources 350 mA and sinks 650 mA."+ "description": "High-side driver 3 gate driver output, referenced to VS3 and driven between VS3 and VB3." }, { "number": "20", "name": "VB3", "type": "power_in",- "description": "High-side driver 3 floating supply, VS3 + 10 V to VS3 + 20 V recommended, absolute max 625 V."+ "description": "High-side driver 3 floating supply, recommended at VS3 + 10 V to VS3 + 20 V and absolute maximum up to 625 V." }, { "number": "21",@@ -195,20 +195,20 @@ { "number": "22", "name": "VS2",- "type": "passive",- "description": "High-side driver 2 floating supply offset voltage, up to 600 V recommended."+ "type": "power_in",+ "description": "High-side driver 2 floating supply offset voltage, with absolute maximum range VB2 − 25 V to VB2 + 0.3 V." }, { "number": "23", "name": "HO2", "type": "output",- "description": "High-side driver 2 gate driver output, typically sources 350 mA and sinks 650 mA."+ "description": "High-side driver 2 gate driver output, referenced to VS2 and driven between VS2 and VB2." }, { "number": "24", "name": "VB2", "type": "power_in",- "description": "High-side driver 2 floating supply, VS2 + 10 V to VS2 + 20 V recommended, absolute max 625 V."+ "description": "High-side driver 2 floating supply, recommended at VS2 + 10 V to VS2 + 20 V and absolute maximum up to 625 V." }, { "number": "25",@@ -219,20 +219,20 @@ { "number": "26", "name": "VS1",- "type": "passive",- "description": "High-side driver 1 floating supply offset voltage, up to 600 V recommended."+ "type": "power_in",+ "description": "High-side driver 1 floating supply offset voltage, with absolute maximum range VB1 − 25 V to VB1 + 0.3 V." }, { "number": "27", "name": "HO1", "type": "output",- "description": "High-side driver 1 gate driver output, typically sources 350 mA and sinks 650 mA."+ "description": "High-side driver 1 gate driver output, referenced to VS1 and driven between VS1 and VB1." }, { "number": "28", "name": "VB1", "type": "power_in",- "description": "High-side driver 1 floating supply, VS1 + 10 V to VS1 + 20 V recommended, absolute max 625 V."+ "description": "High-side driver 1 floating supply, recommended at VS1 + 10 V to VS1 + 20 V and absolute maximum up to 625 V." } ], "provenance": {@@ -240,17 +240,17 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",+ "primary_model": "claude-haiku-5-5", "primary_mode": "text", "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Pin types for VS1-3 (floating offset/return nodes) and RCIN (RC timing node) are my choice; datashee"+ "extractor flagged: Pin numbers and names come from the PIN DEFINITIONS table on page 3. The Figure 3 pin-assignment dra; The datasheet does not assign KiCad electrical classes. Types for RCIN (passive), VS1-3 (power_in, f; Pins 17, 21 and 25 are all listed as NC in the table. The NC pins are given separately with the same" ], "pages_sent": 17,- "cost_usd": 0.1753,- "at": "2026-11-12T04:58:14"+ "cost_usd": 0.0943,+ "at": "2026-11-12T08:02:06" }, "datasheet": { "url": "https://www.onsemi.com/pdf/datasheet/fan73893mx-d.pdf",@@ -305,13 +305,13 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "fd44c2c72a25e09f5c3668dd8117ae17119ab46c40c04b281d5fe5dae310b04c",+ "sha256": "5ce7898230cabf91684f6e231180fb75a0808d73d6be0bf8ca8074bca399ae74", "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "CASE 751BM-01",+ "package_code": "SOIC-28, 300 mils (CASE 751BM-01)", "source_page": 16, "D": { "nom_mm": 17.905,@@ -342,9 +342,9 @@ ] }, "A": {- "nom_mm": 2.5,+ "nom_mm": 2.65, "range_mm": [- 2.35,+ null, 2.65 ] },
page.json+41−39@@ -4,7 +4,7 @@ "slug": "fan73893mx", "title": "FAN73893MX", "brief": "onsemi Gate Drive ICs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "512-FAN73893MX" }, "distributor_check": {- "checked_at": "2026-11-12T04:58:37Z",+ "checked_at": "2026-11-12T08:02:33Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "2832-FAN73893MXTR-ND",@@ -52,97 +52,97 @@ "number": "1", "name": "VDD", "type": "power_in",- "description": "Logic and low-side gate driver power supply voltage, recommended 10 V to 20 V (absolute max 25 V)."+ "description": "Logic and low-side gate driver power supply voltage, recommended 10 V to 20 V." }, { "number": "2", "name": "HIN1", "type": "input",- "description": "Logic input 1 for high-side gate 1 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up."+ "description": "Logic input 1 for the high-side gate 1 driver, with recommended input range VSS to VSS + 5 V." }, { "number": "3", "name": "HIN2", "type": "input",- "description": "Logic input 2 for high-side gate 2 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up."+ "description": "Logic input 2 for the high-side gate 2 driver, with recommended input range VSS to VSS + 5 V." }, { "number": "4", "name": "HIN3", "type": "input",- "description": "Logic input 3 for high-side gate 3 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up."+ "description": "Logic input 3 for the high-side gate 3 driver, with recommended input range VSS to VSS + 5 V." }, { "number": "5", "name": "LIN1", "type": "input",- "description": "Logic input 1 for low-side gate 1 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up."+ "description": "Logic input 1 for the low-side gate 1 driver, with recommended input range VSS to VSS + 5 V." }, { "number": "6", "name": "LIN2", "type": "input",- "description": "Logic input 2 for low-side gate 2 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up."+ "description": "Logic input 2 for the low-side gate 2 driver, with recommended input range VSS to VSS + 5 V." }, { "number": "7", "name": "LIN3", "type": "input",- "description": "Logic input 3 for low-side gate 3 driver, outputs are out of phase with inputs, 3.3 V/5 V compatible, with 50 kΩ typical pull-up."+ "description": "Logic input 3 for the low-side gate 3 driver, with recommended input range VSS to VSS + 5 V." }, { "number": "8", "name": "FO", "type": "output",- "description": "Open-drain fault output indicating over-current and low-side under-voltage, pulled low until the fault clears and the fault-clear timer expires."+ "description": "Open-drain fault output that indicates over-current and low-side under-voltage shutdown; its voltage must not exceed VDD + 0.3 V." }, { "number": "9", "name": "CS", "type": "input",- "description": "Analog input for over-current shutdown, with 500 mV typical positive detect threshold and input range VSS to VSS + 5 V."+ "description": "Analog input for over-current shutdown, with the over-current detect positive threshold of 450 mV to 550 mV (500 mV typical)." }, { "number": "10", "name": "EN", "type": "input",- "description": "Logic input for shutdown functionality, driver operates normally when high, with 150 kΩ typical pull-down and 250 ns typical input filter."+ "description": "Logic input for shutdown functionality; the gate driver operates normally when EN is high, with a positive-going threshold of at least 2.5 V and a negative-going threshold of at most 0.8 V." }, { "number": "11", "name": "RCIN", "type": "passive",- "description": "External RC network input used to define the fault-clear delay, tFLTCLR = CRCIN x 3.3 V / 5 µA."+ "description": "External RC network input that defines the fault-clear delay, using an internal 5 µA current source and a 3.3 V typical positive-going threshold." }, { "number": "12", "name": "VSS", "type": "power_in",- "description": "Logic ground, reference for logic inputs, recommended -5 V to 5 V relative to COM."+ "description": "Logic ground, which is the reference for the logic inputs and EN, with recommended range −5 V to 5 V." }, { "number": "13", "name": "COM", "type": "power_in",- "description": "Low-side driver return (ground reference for the low-side outputs)."+ "description": "Low-side driver return, to which the LO1, LO2 and LO3 outputs are referenced." }, { "number": "14", "name": "LO3", "type": "output",- "description": "Low-side gate driver 3 output, typically sources 350 mA and sinks 650 mA."+ "description": "Low-side gate driver 3 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA." }, { "number": "15", "name": "LO2", "type": "output",- "description": "Low-side gate driver 2 output, typically sources 350 mA and sinks 650 mA."+ "description": "Low-side gate driver 2 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA." }, { "number": "16", "name": "LO1", "type": "output",- "description": "Low-side gate driver 1 output, typically sources 350 mA and sinks 650 mA."+ "description": "Low-side gate driver 1 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA." }, { "number": "17",@@ -153,20 +153,20 @@ { "number": "18", "name": "VS3",- "type": "passive",- "description": "High-side driver 3 floating supply offset voltage, up to 600 V recommended."+ "type": "power_in",+ "description": "High-side driver 3 floating supply offset voltage, with absolute maximum range VB3 − 25 V to VB3 + 0.3 V." }, { "number": "19", "name": "HO3", "type": "output",- "description": "High-side driver 3 gate driver output, typically sources 350 mA and sinks 650 mA."+ "description": "High-side driver 3 gate driver output, referenced to VS3 and driven between VS3 and VB3." }, { "number": "20", "name": "VB3", "type": "power_in",- "description": "High-side driver 3 floating supply, VS3 + 10 V to VS3 + 20 V recommended, absolute max 625 V."+ "description": "High-side driver 3 floating supply, recommended at VS3 + 10 V to VS3 + 20 V and absolute maximum up to 625 V." }, { "number": "21",@@ -177,20 +177,20 @@ { "number": "22", "name": "VS2",- "type": "passive",- "description": "High-side driver 2 floating supply offset voltage, up to 600 V recommended."+ "type": "power_in",+ "description": "High-side driver 2 floating supply offset voltage, with absolute maximum range VB2 − 25 V to VB2 + 0.3 V." }, { "number": "23", "name": "HO2", "type": "output",- "description": "High-side driver 2 gate driver output, typically sources 350 mA and sinks 650 mA."+ "description": "High-side driver 2 gate driver output, referenced to VS2 and driven between VS2 and VB2." }, { "number": "24", "name": "VB2", "type": "power_in",- "description": "High-side driver 2 floating supply, VS2 + 10 V to VS2 + 20 V recommended, absolute max 625 V."+ "description": "High-side driver 2 floating supply, recommended at VS2 + 10 V to VS2 + 20 V and absolute maximum up to 625 V." }, { "number": "25",@@ -201,20 +201,20 @@ { "number": "26", "name": "VS1",- "type": "passive",- "description": "High-side driver 1 floating supply offset voltage, up to 600 V recommended."+ "type": "power_in",+ "description": "High-side driver 1 floating supply offset voltage, with absolute maximum range VB1 − 25 V to VB1 + 0.3 V." }, { "number": "27", "name": "HO1", "type": "output",- "description": "High-side driver 1 gate driver output, typically sources 350 mA and sinks 650 mA."+ "description": "High-side driver 1 gate driver output, referenced to VS1 and driven between VS1 and VB1." }, { "number": "28", "name": "VB1", "type": "power_in",- "description": "High-side driver 1 floating supply, VS1 + 10 V to VS1 + 20 V recommended, absolute max 625 V."+ "description": "High-side driver 1 floating supply, recommended at VS1 + 10 V to VS1 + 20 V and absolute maximum up to 625 V." } ], "provenance": {@@ -222,17 +222,17 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",+ "primary_model": "claude-haiku-5-5", "primary_mode": "text", "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Pin types for VS1-3 (floating offset/return nodes) and RCIN (RC timing node) are my choice; datashee"+ "extractor flagged: Pin numbers and names come from the PIN DEFINITIONS table on page 3. The Figure 3 pin-assignment dra; The datasheet does not assign KiCad electrical classes. Types for RCIN (passive), VS1-3 (power_in, f; Pins 17, 21 and 25 are all listed as NC in the table. The NC pins are given separately with the same" ], "pages_sent": 17,- "cost_usd": 0.1753,- "at": "2026-11-12T04:58:14"+ "cost_usd": 0.0943,+ "at": "2026-11-12T08:02:06" }, "datasheet": { "url": "https://www.onsemi.com/pdf/datasheet/fan73893mx-d.pdf",@@ -287,13 +287,13 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "fd44c2c72a25e09f5c3668dd8117ae17119ab46c40c04b281d5fe5dae310b04c",+ "sha256": "5ce7898230cabf91684f6e231180fb75a0808d73d6be0bf8ca8074bca399ae74", "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "CASE 751BM-01",+ "package_code": "SOIC-28, 300 mils (CASE 751BM-01)", "source_page": 16, "D": { "nom_mm": 17.905,@@ -324,9 +324,9 @@ ] }, "A": {- "nom_mm": 2.5,+ "nom_mm": 2.65, "range_mm": [- 2.35,+ null, 2.65 ] },@@ -1091,5 +1091,7 @@ ], "visibility": { "public": true- }+ },+ "description": "onsemi Gate Drive ICs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }