component
FAN73893MX
Public Made by Adomby adom
onsemi Gate Drive ICs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.md+64−64@@ -2,40 +2,40 @@ **onsemi** · Gate Drive ICs · SOIC-28-300mil -FAN73893MX from onsemi, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+FAN73893MX from onsemi, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD. ## Pinout | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VDD | power_in | Logic and low-side gate driver power supply voltage, recommended 10 V to 20 V. |-| 2 | HIN1 | input | Logic input 1 for the high-side gate 1 driver, with recommended input range VSS to VSS + 5 V. |-| 3 | HIN2 | input | Logic input 2 for the high-side gate 2 driver, with recommended input range VSS to VSS + 5 V. |-| 4 | HIN3 | input | Logic input 3 for the high-side gate 3 driver, with recommended input range VSS to VSS + 5 V. |-| 5 | LIN1 | input | Logic input 1 for the low-side gate 1 driver, with recommended input range VSS to VSS + 5 V. |-| 6 | LIN2 | input | Logic input 2 for the low-side gate 2 driver, with recommended input range VSS to VSS + 5 V. |-| 7 | LIN3 | input | Logic input 3 for the low-side gate 3 driver, with recommended input range VSS to VSS + 5 V. |-| 8 | FO | output | Open-drain fault output that indicates over-current and low-side under-voltage shutdown; its voltage must not exceed VDD + 0.3 V. |-| 9 | CS | input | Analog input for over-current shutdown, with the over-current detect positive threshold of 450 mV to 550 mV (500 mV typical). |-| 10 | EN | input | Logic input for shutdown functionality; the gate driver operates normally when EN is high, with a positive-going threshold of at least 2.5 V and a negative-going threshold of at most 0.8 V. |-| 11 | RCIN | passive | External RC network input that defines the fault-clear delay, using an internal 5 µA current source and a 3.3 V typical positive-going threshold. |-| 12 | VSS | power_in | Logic ground, which is the reference for the logic inputs and EN, with recommended range −5 V to 5 V. |-| 13 | COM | power_in | Low-side driver return, to which the LO1, LO2 and LO3 outputs are referenced. |-| 14 | LO3 | output | Low-side gate driver 3 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA. |-| 15 | LO2 | output | Low-side gate driver 2 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA. |-| 16 | LO1 | output | Low-side gate driver 1 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA. |+| 1 | VDD | power_in | Logic and low-side gate driver power supply; recommended 10 V to 20 V, absolute maximum −0.3 V to 25.0 V. |+| 2 | HIN1 | input | Logic input 1 for the high-side gate 1 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V. |+| 3 | HIN2 | input | Logic input 2 for the high-side gate 2 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V. |+| 4 | HIN3 | input | Logic input 3 for the high-side gate 3 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V. |+| 5 | LIN1 | input | Logic input 1 for the low-side gate 1 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V. |+| 6 | LIN2 | input | Logic input 2 for the low-side gate 2 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V. |+| 7 | LIN3 | input | Logic input 3 for the low-side gate 3 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V. |+| 8 | FO | output | Open-drain fault output that indicates over-current or low-side VDD under-voltage shutdown; it is pulled internally to COM during a fault, and absolute maximum is −0.3 V to VDD + 0.3 V. |+| 9 | CS | input | Analog input for over-current shutdown, with an over-current detect positive threshold of 450 mV to 550 mV (500 mV typical) and recommended range VSS to VSS + 5 V. |+| 10 | EN | input | Logic enable input; a LOW state shuts down the gate driver outputs, with a logic-high threshold of 2.5 V minimum and a logic-low threshold of 0.8 V maximum. |+| 11 | RCIN | passive | External RC network input that defines the fault-clear delay through CRCIN, with an internal 5 µA (typical) current source and a 3.3 V (typical) positive-going threshold. |+| 12 | VSS | power_in | Logic ground; recommended operating range is −5 V to 5 V. |+| 13 | COM | power_in | Low-side driver return; the low-side outputs LO1, LO2 and LO3 are referenced to COM. |+| 14 | LO3 | output | Low-side gate driver 3 output, referenced to COM and swinging up to VDD. |+| 15 | LO2 | output | Low-side gate driver 2 output, referenced to COM and swinging up to VDD. |+| 16 | LO1 | output | Low-side gate driver 1 output, referenced to COM and swinging up to VDD. | | 17 | NC | unconnected | No connect. |-| 18 | VS3 | power_in | High-side driver 3 floating supply offset voltage, with absolute maximum range VB3 − 25 V to VB3 + 0.3 V. |-| 19 | HO3 | output | High-side driver 3 gate driver output, referenced to VS3 and driven between VS3 and VB3. |-| 20 | VB3 | power_in | High-side driver 3 floating supply, recommended at VS3 + 10 V to VS3 + 20 V and absolute maximum up to 625 V. |+| 18 | VS3 | power_in | High-side driver 3 floating supply offset voltage; absolute maximum range is VB3 − 25 V to VB3 + 0.3 V. |+| 19 | HO3 | output | High-side driver 3 gate driver output, referenced to VS3 and swinging between VS3 and VB3. |+| 20 | VB3 | power_in | High-side driver 3 floating supply; recommended VS3 + 10 V to VS3 + 20 V, absolute maximum 625 V. | | 21 | NC | unconnected | No connect. |-| 22 | VS2 | power_in | High-side driver 2 floating supply offset voltage, with absolute maximum range VB2 − 25 V to VB2 + 0.3 V. |-| 23 | HO2 | output | High-side driver 2 gate driver output, referenced to VS2 and driven between VS2 and VB2. |-| 24 | VB2 | power_in | High-side driver 2 floating supply, recommended at VS2 + 10 V to VS2 + 20 V and absolute maximum up to 625 V. |+| 22 | VS2 | power_in | High-side driver 2 floating supply offset voltage; absolute maximum range is VB2 − 25 V to VB2 + 0.3 V. |+| 23 | HO2 | output | High-side driver 2 gate driver output, referenced to VS2 and swinging between VS2 and VB2. |+| 24 | VB2 | power_in | High-side driver 2 floating supply; recommended VS2 + 10 V to VS2 + 20 V, absolute maximum 625 V. | | 25 | NC | unconnected | No connect. |-| 26 | VS1 | power_in | High-side driver 1 floating supply offset voltage, with absolute maximum range VB1 − 25 V to VB1 + 0.3 V. |-| 27 | HO1 | output | High-side driver 1 gate driver output, referenced to VS1 and driven between VS1 and VB1. |-| 28 | VB1 | power_in | High-side driver 1 floating supply, recommended at VS1 + 10 V to VS1 + 20 V and absolute maximum up to 625 V. |+| 26 | VS1 | power_in | High-side driver 1 floating supply offset voltage (the pin table prints this pin as “floating supply”); absolute maximum range is VB1 − 25 V to VB1 + 0.3 V. |+| 27 | HO1 | output | High-side driver 1 gate driver output, referenced to VS1 and swinging between VS1 and VB1. |+| 28 | VB1 | power_in | High-side driver 1 floating supply; recommended VS1 + 10 V to VS1 + 20 V, absolute maximum 625 V. | ## Key specifications @@ -52,51 +52,51 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| VS1,2,3 High-Side Floating Supply Offset Voltage | VS1,2,3 | | | 600 | V | | 4 |-| VDD Low-Side and Logic Fixed Supply Voltage | VDD | 10 | | 20 | V | | 4 |-| VSS Logic Ground | VSS | -5 | | 5 | V | | 4 |-| TA Ambient Temperature | TA | -40 | | 125 | °C | | 4 |-| VB High-Side Floating Supply Voltage | VB | -0.3 | | 625 | V | | 4 |-| VDD Low-Side and Logic-Fixed supply voltage | VDD | -0.3 | | 25 | V | | 4 |-| VLO Low-Side Floating Output Voltage | VLO | -0.3 | | | V | | 4 |-| VFO Fault Output Voltage (FO) | VFO | -0.3 | | | V | | 4 |-| dVS/dt Allowable Offset Voltage Slew Rate | dVS/dt | -50 | | 50 | V/ns | | 4 |-| PD Power Dissipation | PD | | | 1.4 | W | Note 2, 3 | 4 |-| JA Thermal Resistance | JA | | | 70 | °C/W | | 4 |-| TJ Junction Temperature | TJ | | | 150 | °C | | 4 |-| TSTG Storage Temperature | TSTG | -55 | | 150 | °C | | 4 |-| Quiescent VDD Supply Current | IQDD | | 250 | 400 | A | VLIN1,2,3 = 5 V or open, EN = 0 V | 5 |-| Operating VDD Supply Current | IPDD | | 550 | 750 | A | fLIN1,2,3 = 20 kHz, rms Value | 5 |+| High-Side Floating Supply Voltage | VB | -0.3 | | 625 | V | | 4 |+| Low-Side and Logic-Fixed supply voltage | VDD | -0.3 | | 25 | V | | 4 |+| Low-Side Floating Output Voltage | VLO | -0.3 | | | V | | 4 |+| Fault Output Voltage (FO) | VFO | -0.3 | | | V | | 4 |+| Allowable Offset Voltage Slew Rate | dVS/dt | -50 | | 50 | V/ns | | 4 |+| Power Dissipation | PD | | | 1.4 | W | Note 2, 3 | 4 |+| Junction Temperature | TJ | | | 150 | °C | | 4 |+| Storage Temperature | TSTG | -55 | | 150 | °C | | 4 |+| Thermal Resistance | JA | | | 70 | °C/W | | 4 |+| High-Side Floating Supply Offset Voltage | VS1,2,3 | | | 600 | V | | 4 |+| Low-Side and Logic Fixed Supply Voltage | VDD | 10 | | 20 | V | | 4 |+| Logic Ground | VSS | -5 | | 5 | V | | 4 |+| Ambient Temperature | TA | -40 | | 125 | °C | | 4 |+| Operating VDD Supply Current | IPDD | | 550 | 750 | µA | fLIN1,2,3 = 20 kHz, rms Value | 5 |+| Quiescent VDD Supply Current | IQDD | | 250 | 400 | µA | VLIN1,2,3 = 5 V or open, EN = 0 V | 5 | | VDD Supply Under-Voltage Positive-Going Threshold | VDDUV+ | 7.5 | 8.5 | 9.3 | V | VDD = Sweep | 5 |-| VDD Supply Under-Voltage Negative-Going Threshold | VDDUV− | 7 | 8 | 8.7 | V | VDD = Sweep | 5 |+| VDD Supply Under-Voltage Negative-Going Threshold | VDDUV- | 7 | 8 | 8.7 | V | VDD = Sweep | 5 | | VBS Supply Under-Voltage Positive-Going Threshold | VBSUV+ | 7.5 | 8.5 | 9.3 | V | VBS1,2,3 = Sweep | 5 |-| VBS Supply Under-Voltage Negative-Going Threshold | VBSUV− | 7 | 8 | 8.7 | V | VBS1,2,3 = Sweep | 5 |-| Offset Supply Leakage Current | ILK | | | 10 | A | VB1,2,3 = VS1,2,3 = 600 V | 5 |-| Quiescent VBS Supply Current | IQBS | 10 | 50 | 80 | A | VHIN1,2,3 = 0 V or 5 V, EN = 0 V | 5 |-| Operating VBS Supply Current | IPBS | 200 | 320 | 480 | A | fHIN1,2,3 = 20 kHz, rms Value | 5 |-| High-Level Output voltage, VBIAS − VO | VOH | | | 100 | mV | IO = 0 mA (No Load) | 5 |+| VBS Supply Under-Voltage Negative-Going Threshold | VBSUV- | 7 | 8 | 8.7 | V | VBS1,2,3 = Sweep | 5 |+| Offset Supply Leakage Current | ILK | | | 10 | µA | VB1,2,3 = VS1,2,3 = 600 V | 5 |+| Quiescent VBS Supply Current | IQBS | 10 | 50 | 80 | µA | VHIN1,2,3 = 0 V or 5 V, EN = 0 V | 5 |+| Operating VBS Supply Current | IPBS | 200 | 320 | 480 | µA | fHIN1,2,3 = 20 kHz, rms Value | 5 |+| High-Level Output voltage, VBIAS - VO | VOH | | | 100 | mV | IO = 0 mA (No Load) | 5 | | Low-Level Output voltage, VO | VOL | | | 100 | mV | IO = 0 mA (No Load) | 5 |-| Output HIGH Short-Circuit Pulse Current | IO+ | 250 | 350 | | mA | VO = 0 V, VIN = 0 V with PW ≤ 10 s | 5 |-| Output LOW Short-Circuit Pulsed Current | IO− | 500 | 650 | | mA | VO = 15 V, VIN = 5 V with PW ≤ 10 s | 5 |+| Output HIGH Short-Circuit Pulse Current (Note 4) | IO+ | 250 | 350 | | mA | VO = 0 V, VIN = 0 V with PW ≤ 10 s | 5 |+| Output LOW Short-Circuit Pulsed Current (Note 4) | IO- | 500 | 650 | | mA | VO = 15 V, VIN = 5 V with PW ≤ 10 s | 5 | | Allowable Negative VS Pin Voltage for HIN Signal Propagation to HO | VS | | -9.8 | -9 | V | | 5 |-| Logic “0” Input Voltage | VIH | 2.5 | | | V | HIN1,2,3, LIN1,2,3 | 5 |-| Logic “1” Input Voltage | VIL | | | 0.8 | V | HIN1,2,3, LIN1,2,3 | 5 |-| Logic Input Bias Current (HO = LO = HIGH) | IIN+ | 77 | 100 | 143 | A | VIN = 0 V | 5 |-| Logic Input Bias Current (HO = LO = LOW) | IIN− | | 8.5 | 25 | A | VIN = 5 V | 5 |-| Logic Input Pull-Up Resistance | RIN | 35 | 50 | 65 | k | | 5 |+| Logic '0' Input Voltage | VIH | 2.5 | | | V | HIN1,2,3, LIN1,2,3 | 5 |+| Logic '1' Input Voltage | VIL | | | 0.8 | V | HIN1,2,3, LIN1,2,3 | 5 |+| Logic Input Bias Current (HO = LO = HIGH) | IIN+ | 77 | 100 | 143 | µA | VIN = 0 V | 5 |+| Logic Input Bias Current (HO = LO = LOW) | IIN- | | 8.5 | 25 | µA | VIN = 5 V | 5 |+| Logic Input Pull-Up Resistance | RIN | 35 | 50 | 65 | kΩ | | 5 | | Enable Positive-Going Threshold Voltage | VEN+ | 2.5 | | | V | | 5 |-| Enable Negative-Going Threshold Voltage | VEN− | | | 0.8 | V | | 5 |-| Logic Enable “1” Input Bias Current | IEN+ | 15 | 33 | 50 | A | VEN = 5 V (Pull-Down = 150 k) | 5 |-| Logic Enable “0” Input Bias Current | IEN− | | | 2 | A | VEN = 0 V | 5 |-| Logic Input Pull-Down Resistance | REN | 100 | 150 | 333 | k | | 5 |+| Enable Negative-Going Threshold Voltage | VEN- | | | 0.8 | V | | 5 |+| Logic Enable '1' Input Bias Current | IEN+ | 15 | 33 | 50 | µA | VEN = 5 V (Pull-Down = 150 k) | 5 |+| Logic Enable '0' Input Bias Current | IEN- | | | 2 | µA | VEN = 0 V | 5 |+| Logic Input Pull-Down Resistance | REN | 100 | 150 | 333 | kΩ | | 5 | | Over-Current Detect Positive Threshold | VCSTH+ | 450 | 500 | 550 | mV | | 5 |-| Short-Circuit Input Current | ICSIN | 5 | 10 | 15 | A | VCSIN = 1 V | 5 |+| Short-Circuit Input Current | ICSIN | 5 | 10 | 15 | µA | VCSIN = 1 V | 5 | | Soft Turn-Off Sink Current | ISOFT | 25 | 40 | 55 | mA | | 5 | | RCIN Positive-Going Threshold Voltage | VRCINTH+ | 2.7 | 3.3 | 3.9 | V | | 6 |-| RCIN Internal Current Source | IRCIN | 3 | 5 | 7 | A | CRCIN = 2 nF | 6 | | Fault Output Low Level Voltage | VFOL | | 0.2 | 0.5 | V | VCS = 1 V, IFO = 1.5 mA | 6 |-| RCIN On Resistance | RDSRCIN | 50 | 75 | 100 | | IRCIN = 1.5 mA | 6 |-| Fault Output On Resistance | RDSFO | 90 | 130 | 170 | | IFO = 1.5 mA | 6 |+| RCIN Internal Current Source | IRCIN | 3 | 5 | 7 | µA | CRCIN = 2 nF | 6 |+| RCIN On Resistance | RDSRCIN | 50 | 75 | 100 | Ω | IRCIN = 1.5 mA | 6 |+| Fault Output On Resistance | RDSFO | 90 | 130 | 170 | Ω | IFO = 1.5 mA | 6 | | Turn-On Propagation Delay | tON | 350 | 500 | 650 | ns | VLIN1,2,3 = VHIN1,2,3 = 0 V, VS1,2,3 = 0 V | 6 | | Turn-Off Propagation Delay | tOFF | 350 | 500 | 650 | ns | VLIN1,2,3 = VHIN1,2,3 = 5 V, VS1,2,3 = 0 V | 6 | | Turn-On Rise Time | tR | 20 | 50 | 100 | ns | VLIN1,2,3 = VHIN1,2,3 = 0 V | 6 |@@ -105,7 +105,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | CS Pin Leading-Edge Blanking Time | tCSBLT | 400 | 650 | 850 | ns | | 6 | | Time from CS Triggering to FO | tCSFO | | 850 | 1300 | ns | From VCSC = 1 V to FO Turn-Off | 6 | | Time from CS Triggering to Low-Side Gate Outputs Turn-Off | tCSOFF | | 850 | 1300 | ns | From VCSC = 1 V to Starting Gate Turn-Off | 6 |-| Input Filtering Time (Note 5) | tFLTIN | 170 | 250 | 330 | ns | HINx, LINx, EN | 6 |+| Input Filtering Time (Note 5) (HINx, LINx, EN) | tFLTIN | 170 | 250 | 330 | ns | | 6 | | Fault-Clear Time | tFLTCLR | | 1.3 | 2.35 | ms | CRCIN = 2 nF | 6 | | Dead Time | DT | 230 | 320 | 400 | ns | | 6 | | Dead-Time Matching (All Six Channels) | MDT | | | 50 | ns | | 6 |@@ -123,7 +123,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/fan73893mx-d.pdf) (17 pp, sha256 `14ce477b0a381e15`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/fan73893mx-d.pdf) (17 pp, sha256 `14ce477b0a381e15`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+37−38@@ -1,6 +1,6 @@ { "slug": "fan73893mx",- "version": "0.1.1",+ "version": "0.1.2", "type": "component", "description": "onsemi Gate Drive ICs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -28,8 +28,7 @@ "viewers/symbol.html", "viewers/footprint.html", "fan73893mx-hero.glb",- "fan73893mx-hero.overlay.json",- "fan73893mx-etched.glb"+ "fan73893mx-hero.overlay.json" ], "component": { "mpn": "FAN73893MX",@@ -43,7 +42,7 @@ "symbol": "fan73893mx.kicad_sym", "footprint": "fan73893mx.kicad_mod", "model_3d": "fan73893mx-hero.glb",- "model_3d_plain": "fan73893mx-etched.glb",+ "model_3d_plain": "fan73893mx.glb", "model_3d_step": "fan73893mx-etched.step", "model_3d_step_plain": "fan73893mx.step", "lbr": "fan73893mx.lbr"@@ -54,7 +53,7 @@ "mouser": "512-FAN73893MX" }, "distributor_check": {- "checked_at": "2026-11-12T08:02:33Z",+ "checked_at": "2026-11-13T01:54:03Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "2832-FAN73893MXTR-ND",@@ -70,97 +69,97 @@ "number": "1", "name": "VDD", "type": "power_in",- "description": "Logic and low-side gate driver power supply voltage, recommended 10 V to 20 V."+ "description": "Logic and low-side gate driver power supply; recommended 10 V to 20 V, absolute maximum −0.3 V to 25.0 V." }, { "number": "2", "name": "HIN1", "type": "input",- "description": "Logic input 1 for the high-side gate 1 driver, with recommended input range VSS to VSS + 5 V."+ "description": "Logic input 1 for the high-side gate 1 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V." }, { "number": "3", "name": "HIN2", "type": "input",- "description": "Logic input 2 for the high-side gate 2 driver, with recommended input range VSS to VSS + 5 V."+ "description": "Logic input 2 for the high-side gate 2 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V." }, { "number": "4", "name": "HIN3", "type": "input",- "description": "Logic input 3 for the high-side gate 3 driver, with recommended input range VSS to VSS + 5 V."+ "description": "Logic input 3 for the high-side gate 3 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V." }, { "number": "5", "name": "LIN1", "type": "input",- "description": "Logic input 1 for the low-side gate 1 driver, with recommended input range VSS to VSS + 5 V."+ "description": "Logic input 1 for the low-side gate 1 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V." }, { "number": "6", "name": "LIN2", "type": "input",- "description": "Logic input 2 for the low-side gate 2 driver, with recommended input range VSS to VSS + 5 V."+ "description": "Logic input 2 for the low-side gate 2 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V." }, { "number": "7", "name": "LIN3", "type": "input",- "description": "Logic input 3 for the low-side gate 3 driver, with recommended input range VSS to VSS + 5 V."+ "description": "Logic input 3 for the low-side gate 3 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V." }, { "number": "8", "name": "FO", "type": "output",- "description": "Open-drain fault output that indicates over-current and low-side under-voltage shutdown; its voltage must not exceed VDD + 0.3 V."+ "description": "Open-drain fault output that indicates over-current or low-side VDD under-voltage shutdown; it is pulled internally to COM during a fault, and absolute maximum is −0.3 V to VDD + 0.3 V." }, { "number": "9", "name": "CS", "type": "input",- "description": "Analog input for over-current shutdown, with the over-current detect positive threshold of 450 mV to 550 mV (500 mV typical)."+ "description": "Analog input for over-current shutdown, with an over-current detect positive threshold of 450 mV to 550 mV (500 mV typical) and recommended range VSS to VSS + 5 V." }, { "number": "10", "name": "EN", "type": "input",- "description": "Logic input for shutdown functionality; the gate driver operates normally when EN is high, with a positive-going threshold of at least 2.5 V and a negative-going threshold of at most 0.8 V."+ "description": "Logic enable input; a LOW state shuts down the gate driver outputs, with a logic-high threshold of 2.5 V minimum and a logic-low threshold of 0.8 V maximum." }, { "number": "11", "name": "RCIN", "type": "passive",- "description": "External RC network input that defines the fault-clear delay, using an internal 5 µA current source and a 3.3 V typical positive-going threshold."+ "description": "External RC network input that defines the fault-clear delay through CRCIN, with an internal 5 µA (typical) current source and a 3.3 V (typical) positive-going threshold." }, { "number": "12", "name": "VSS", "type": "power_in",- "description": "Logic ground, which is the reference for the logic inputs and EN, with recommended range −5 V to 5 V."+ "description": "Logic ground; recommended operating range is −5 V to 5 V." }, { "number": "13", "name": "COM", "type": "power_in",- "description": "Low-side driver return, to which the LO1, LO2 and LO3 outputs are referenced."+ "description": "Low-side driver return; the low-side outputs LO1, LO2 and LO3 are referenced to COM." }, { "number": "14", "name": "LO3", "type": "output",- "description": "Low-side gate driver 3 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA."+ "description": "Low-side gate driver 3 output, referenced to COM and swinging up to VDD." }, { "number": "15", "name": "LO2", "type": "output",- "description": "Low-side gate driver 2 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA."+ "description": "Low-side gate driver 2 output, referenced to COM and swinging up to VDD." }, { "number": "16", "name": "LO1", "type": "output",- "description": "Low-side gate driver 1 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA."+ "description": "Low-side gate driver 1 output, referenced to COM and swinging up to VDD." }, { "number": "17",@@ -172,19 +171,19 @@ "number": "18", "name": "VS3", "type": "power_in",- "description": "High-side driver 3 floating supply offset voltage, with absolute maximum range VB3 − 25 V to VB3 + 0.3 V."+ "description": "High-side driver 3 floating supply offset voltage; absolute maximum range is VB3 − 25 V to VB3 + 0.3 V." }, { "number": "19", "name": "HO3", "type": "output",- "description": "High-side driver 3 gate driver output, referenced to VS3 and driven between VS3 and VB3."+ "description": "High-side driver 3 gate driver output, referenced to VS3 and swinging between VS3 and VB3." }, { "number": "20", "name": "VB3", "type": "power_in",- "description": "High-side driver 3 floating supply, recommended at VS3 + 10 V to VS3 + 20 V and absolute maximum up to 625 V."+ "description": "High-side driver 3 floating supply; recommended VS3 + 10 V to VS3 + 20 V, absolute maximum 625 V." }, { "number": "21",@@ -196,19 +195,19 @@ "number": "22", "name": "VS2", "type": "power_in",- "description": "High-side driver 2 floating supply offset voltage, with absolute maximum range VB2 − 25 V to VB2 + 0.3 V."+ "description": "High-side driver 2 floating supply offset voltage; absolute maximum range is VB2 − 25 V to VB2 + 0.3 V." }, { "number": "23", "name": "HO2", "type": "output",- "description": "High-side driver 2 gate driver output, referenced to VS2 and driven between VS2 and VB2."+ "description": "High-side driver 2 gate driver output, referenced to VS2 and swinging between VS2 and VB2." }, { "number": "24", "name": "VB2", "type": "power_in",- "description": "High-side driver 2 floating supply, recommended at VS2 + 10 V to VS2 + 20 V and absolute maximum up to 625 V."+ "description": "High-side driver 2 floating supply; recommended VS2 + 10 V to VS2 + 20 V, absolute maximum 625 V." }, { "number": "25",@@ -220,19 +219,19 @@ "number": "26", "name": "VS1", "type": "power_in",- "description": "High-side driver 1 floating supply offset voltage, with absolute maximum range VB1 − 25 V to VB1 + 0.3 V."+ "description": "High-side driver 1 floating supply offset voltage (the pin table prints this pin as “floating supply”); absolute maximum range is VB1 − 25 V to VB1 + 0.3 V." }, { "number": "27", "name": "HO1", "type": "output",- "description": "High-side driver 1 gate driver output, referenced to VS1 and driven between VS1 and VB1."+ "description": "High-side driver 1 gate driver output, referenced to VS1 and swinging between VS1 and VB1." }, { "number": "28", "name": "VB1", "type": "power_in",- "description": "High-side driver 1 floating supply, recommended at VS1 + 10 V to VS1 + 20 V and absolute maximum up to 625 V."+ "description": "High-side driver 1 floating supply; recommended VS1 + 10 V to VS1 + 20 V, absolute maximum 625 V." } ], "provenance": {@@ -246,11 +245,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Pin numbers and names come from the PIN DEFINITIONS table on page 3. The Figure 3 pin-assignment dra; The datasheet does not assign KiCad electrical classes. Types for RCIN (passive), VS1-3 (power_in, f; Pins 17, 21 and 25 are all listed as NC in the table. The NC pins are given separately with the same"+ "extractor flagged: Pin 26 is printed in the pin definitions table as 'High-side driver 1 floating supply' while the sym; KiCad ERC types for the VS, VB, COM, VSS and RCIN pins are my classification from the functional des; Pins 17, 21 and 25 are printed as NC (no connect) and are listed as unconnected." ], "pages_sent": 17,- "cost_usd": 0.0943,- "at": "2026-11-12T08:02:06"+ "cost_usd": 0.0951,+ "at": "2026-11-13T01:53:45" }, "datasheet": { "url": "https://www.onsemi.com/pdf/datasheet/fan73893mx-d.pdf",@@ -287,7 +286,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",- "checked": "2026-11-12",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -305,8 +304,8 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "5ce7898230cabf91684f6e231180fb75a0808d73d6be0bf8ca8074bca399ae74",- "checked": "2026-11-12",+ "sha256": "de40f3e5c118c52075f9d0e275e5e1403a5b7fa4c27b5c6229d72770c496bcb9",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -342,9 +341,9 @@ ] }, "A": {- "nom_mm": 2.65,+ "nom_mm": 2.5, "range_mm": [- null,+ 2.35, 2.65 ] },
page.json+40−39@@ -4,7 +4,7 @@ "slug": "fan73893mx", "title": "FAN73893MX", "brief": "onsemi Gate Drive ICs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.1",+ "version": "0.1.2", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -25,7 +25,7 @@ "symbol": "fan73893mx.kicad_sym", "footprint": "fan73893mx.kicad_mod", "model_3d": "fan73893mx-hero.glb",- "model_3d_plain": "fan73893mx-etched.glb",+ "model_3d_plain": "fan73893mx.glb", "model_3d_step": "fan73893mx-etched.step", "model_3d_step_plain": "fan73893mx.step", "lbr": "fan73893mx.lbr"@@ -36,7 +36,7 @@ "mouser": "512-FAN73893MX" }, "distributor_check": {- "checked_at": "2026-11-12T08:02:33Z",+ "checked_at": "2026-11-13T01:54:03Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "2832-FAN73893MXTR-ND",@@ -52,97 +52,97 @@ "number": "1", "name": "VDD", "type": "power_in",- "description": "Logic and low-side gate driver power supply voltage, recommended 10 V to 20 V."+ "description": "Logic and low-side gate driver power supply; recommended 10 V to 20 V, absolute maximum −0.3 V to 25.0 V." }, { "number": "2", "name": "HIN1", "type": "input",- "description": "Logic input 1 for the high-side gate 1 driver, with recommended input range VSS to VSS + 5 V."+ "description": "Logic input 1 for the high-side gate 1 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V." }, { "number": "3", "name": "HIN2", "type": "input",- "description": "Logic input 2 for the high-side gate 2 driver, with recommended input range VSS to VSS + 5 V."+ "description": "Logic input 2 for the high-side gate 2 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V." }, { "number": "4", "name": "HIN3", "type": "input",- "description": "Logic input 3 for the high-side gate 3 driver, with recommended input range VSS to VSS + 5 V."+ "description": "Logic input 3 for the high-side gate 3 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V." }, { "number": "5", "name": "LIN1", "type": "input",- "description": "Logic input 1 for the low-side gate 1 driver, with recommended input range VSS to VSS + 5 V."+ "description": "Logic input 1 for the low-side gate 1 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V." }, { "number": "6", "name": "LIN2", "type": "input",- "description": "Logic input 2 for the low-side gate 2 driver, with recommended input range VSS to VSS + 5 V."+ "description": "Logic input 2 for the low-side gate 2 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V." }, { "number": "7", "name": "LIN3", "type": "input",- "description": "Logic input 3 for the low-side gate 3 driver, with recommended input range VSS to VSS + 5 V."+ "description": "Logic input 3 for the low-side gate 3 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V." }, { "number": "8", "name": "FO", "type": "output",- "description": "Open-drain fault output that indicates over-current and low-side under-voltage shutdown; its voltage must not exceed VDD + 0.3 V."+ "description": "Open-drain fault output that indicates over-current or low-side VDD under-voltage shutdown; it is pulled internally to COM during a fault, and absolute maximum is −0.3 V to VDD + 0.3 V." }, { "number": "9", "name": "CS", "type": "input",- "description": "Analog input for over-current shutdown, with the over-current detect positive threshold of 450 mV to 550 mV (500 mV typical)."+ "description": "Analog input for over-current shutdown, with an over-current detect positive threshold of 450 mV to 550 mV (500 mV typical) and recommended range VSS to VSS + 5 V." }, { "number": "10", "name": "EN", "type": "input",- "description": "Logic input for shutdown functionality; the gate driver operates normally when EN is high, with a positive-going threshold of at least 2.5 V and a negative-going threshold of at most 0.8 V."+ "description": "Logic enable input; a LOW state shuts down the gate driver outputs, with a logic-high threshold of 2.5 V minimum and a logic-low threshold of 0.8 V maximum." }, { "number": "11", "name": "RCIN", "type": "passive",- "description": "External RC network input that defines the fault-clear delay, using an internal 5 µA current source and a 3.3 V typical positive-going threshold."+ "description": "External RC network input that defines the fault-clear delay through CRCIN, with an internal 5 µA (typical) current source and a 3.3 V (typical) positive-going threshold." }, { "number": "12", "name": "VSS", "type": "power_in",- "description": "Logic ground, which is the reference for the logic inputs and EN, with recommended range −5 V to 5 V."+ "description": "Logic ground; recommended operating range is −5 V to 5 V." }, { "number": "13", "name": "COM", "type": "power_in",- "description": "Low-side driver return, to which the LO1, LO2 and LO3 outputs are referenced."+ "description": "Low-side driver return; the low-side outputs LO1, LO2 and LO3 are referenced to COM." }, { "number": "14", "name": "LO3", "type": "output",- "description": "Low-side gate driver 3 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA."+ "description": "Low-side gate driver 3 output, referenced to COM and swinging up to VDD." }, { "number": "15", "name": "LO2", "type": "output",- "description": "Low-side gate driver 2 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA."+ "description": "Low-side gate driver 2 output, referenced to COM and swinging up to VDD." }, { "number": "16", "name": "LO1", "type": "output",- "description": "Low-side gate driver 1 output, referenced to COM, with source and sink capability of typically 350 mA and 650 mA."+ "description": "Low-side gate driver 1 output, referenced to COM and swinging up to VDD." }, { "number": "17",@@ -154,19 +154,19 @@ "number": "18", "name": "VS3", "type": "power_in",- "description": "High-side driver 3 floating supply offset voltage, with absolute maximum range VB3 − 25 V to VB3 + 0.3 V."+ "description": "High-side driver 3 floating supply offset voltage; absolute maximum range is VB3 − 25 V to VB3 + 0.3 V." }, { "number": "19", "name": "HO3", "type": "output",- "description": "High-side driver 3 gate driver output, referenced to VS3 and driven between VS3 and VB3."+ "description": "High-side driver 3 gate driver output, referenced to VS3 and swinging between VS3 and VB3." }, { "number": "20", "name": "VB3", "type": "power_in",- "description": "High-side driver 3 floating supply, recommended at VS3 + 10 V to VS3 + 20 V and absolute maximum up to 625 V."+ "description": "High-side driver 3 floating supply; recommended VS3 + 10 V to VS3 + 20 V, absolute maximum 625 V." }, { "number": "21",@@ -178,19 +178,19 @@ "number": "22", "name": "VS2", "type": "power_in",- "description": "High-side driver 2 floating supply offset voltage, with absolute maximum range VB2 − 25 V to VB2 + 0.3 V."+ "description": "High-side driver 2 floating supply offset voltage; absolute maximum range is VB2 − 25 V to VB2 + 0.3 V." }, { "number": "23", "name": "HO2", "type": "output",- "description": "High-side driver 2 gate driver output, referenced to VS2 and driven between VS2 and VB2."+ "description": "High-side driver 2 gate driver output, referenced to VS2 and swinging between VS2 and VB2." }, { "number": "24", "name": "VB2", "type": "power_in",- "description": "High-side driver 2 floating supply, recommended at VS2 + 10 V to VS2 + 20 V and absolute maximum up to 625 V."+ "description": "High-side driver 2 floating supply; recommended VS2 + 10 V to VS2 + 20 V, absolute maximum 625 V." }, { "number": "25",@@ -202,19 +202,19 @@ "number": "26", "name": "VS1", "type": "power_in",- "description": "High-side driver 1 floating supply offset voltage, with absolute maximum range VB1 − 25 V to VB1 + 0.3 V."+ "description": "High-side driver 1 floating supply offset voltage (the pin table prints this pin as “floating supply”); absolute maximum range is VB1 − 25 V to VB1 + 0.3 V." }, { "number": "27", "name": "HO1", "type": "output",- "description": "High-side driver 1 gate driver output, referenced to VS1 and driven between VS1 and VB1."+ "description": "High-side driver 1 gate driver output, referenced to VS1 and swinging between VS1 and VB1." }, { "number": "28", "name": "VB1", "type": "power_in",- "description": "High-side driver 1 floating supply, recommended at VS1 + 10 V to VS1 + 20 V and absolute maximum up to 625 V."+ "description": "High-side driver 1 floating supply; recommended VS1 + 10 V to VS1 + 20 V, absolute maximum 625 V." } ], "provenance": {@@ -228,11 +228,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Pin numbers and names come from the PIN DEFINITIONS table on page 3. The Figure 3 pin-assignment dra; The datasheet does not assign KiCad electrical classes. Types for RCIN (passive), VS1-3 (power_in, f; Pins 17, 21 and 25 are all listed as NC in the table. The NC pins are given separately with the same"+ "extractor flagged: Pin 26 is printed in the pin definitions table as 'High-side driver 1 floating supply' while the sym; KiCad ERC types for the VS, VB, COM, VSS and RCIN pins are my classification from the functional des; Pins 17, 21 and 25 are printed as NC (no connect) and are listed as unconnected." ], "pages_sent": 17,- "cost_usd": 0.0943,- "at": "2026-11-12T08:02:06"+ "cost_usd": 0.0951,+ "at": "2026-11-13T01:53:45" }, "datasheet": { "url": "https://www.onsemi.com/pdf/datasheet/fan73893mx-d.pdf",@@ -269,7 +269,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",- "checked": "2026-11-12",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -287,8 +287,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "5ce7898230cabf91684f6e231180fb75a0808d73d6be0bf8ca8074bca399ae74",- "checked": "2026-11-12",+ "sha256": "de40f3e5c118c52075f9d0e275e5e1403a5b7fa4c27b5c6229d72770c496bcb9",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -324,9 +324,9 @@ ] }, "A": {- "nom_mm": 2.65,+ "nom_mm": 2.5, "range_mm": [- null,+ 2.35, 2.65 ] },@@ -1098,10 +1098,11 @@ "viewers/symbol.html", "viewers/footprint.html", "fan73893mx-hero.glb",- "fan73893mx-hero.overlay.json",- "fan73893mx-etched.glb"+ "fan73893mx-hero.overlay.json" ], "visibility": { "public": true- }+ },+ "description": "onsemi Gate Drive ICs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }