main
History Download
Ray fan7383mx: laser-etched CAD + chip hero (factory 2.0.0 backfill) 0df15d3

FAN7383MX

onsemi · Isolators - Gate Drivers · SOP-14

FAN7383MX from onsemi, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Gate driver logic input. Schmitt-trigger input; high-side output is in phase with IN.
2 SD input Shutdown logic input, active low. Pulling SD low disables both high-side and low-side outputs.
3 DT input Dead-time programming pin. An external resistor to GND sets the programmable dead time between HO and LO transitions (minimum ~330 ns).
4 VDD power_in Low-side and logic supply voltage input. Typically 15 V; UVLO monitors this rail.
5 LO1 output Low-side driver source-current output (sourcing leg, ~350 mA typical). Connect to the gate of the low-side MOSFET/IGBT, typically through a series turn-on resistor.
6 LO2 output Low-side driver sink-current output (sinking leg, ~650 mA typical). Connect to the gate of the low-side MOSFET/IGBT, typically through a series turn-off path/diode.
7 GND power_in Low-side ground reference for VDD, logic, and low-side driver.
8 NC unconnected No connection. Leave floating or tie for creepage between low-side and high-side domains.
9 NC unconnected No connection. Provides isolation spacing between low-side and high-side pins.
10 NC unconnected No connection. Provides isolation spacing between low-side and high-side pins.
11 VS power_in High-side floating supply return (switch-node reference). Connects to the source of the high-side MOSFET/IGBT; tolerates VS down to about -9.8 V (typ) with VDD = VBS = 15 V.
12 HO2 output High-side driver sink-current output (sinking leg, ~650 mA typical), referenced to VS. Connect to the gate of the high-side MOSFET/IGBT for turn-off.
13 HO1 output High-side driver source-current output (sourcing leg, ~350 mA typical), referenced to VS. Connect to the gate of the high-side MOSFET/IGBT for turn-on.
14 VB power_in High-side floating supply (bootstrap rail). Bypass to VS with the bootstrap capacitor; charged from VDD via the bootstrap diode/resistor.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOP-14
Category PMIC
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • FAN7383MXM
  • FAN7383MX

CAD (KiCad official)

  • Symbol: FAN7383MX
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14 (KiCad packages3D, STEP)
  • 3D model files: fan7383mx-etched.step / fan7383mx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fan7383mx.step / fan7383mx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (18 pp, sha256 34adb0cc997817a0, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF