Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FAN7380MX-JSM

JSMSEMI · Gate Drivers · SOP-8

FAN7380MX-JSM from JSMSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LIN input Low-side logic signal input that drives LO, with a logic input voltage range of 0 to VCC and a high threshold of at least 2.5 V and a low threshold of at most 0.8 V.
2 HIN input High-side logic signal input that drives HO, with a logic input voltage range of 0 to VCC and a high threshold of at least 2.5 V and a low threshold of at most 0.8 V.
3 VCC power_in Low-side supply voltage, recommended 10 V to 20 V and absolute maximum 25 V, with UVLO positive threshold typically 8.9 V and negative threshold typically 8.2 V.
4 COM power_in Ground reference of the device (shown as VSS in the block diagram), to which logic input and low-side voltages are referenced.
5 LO output Low-side gate drive output with source current typically 300 mA and sink current typically 600 mA, swinging from 0 to VCC.
6 VS power_in High-side floating supply return (floating ground), recommended -9 V to 700 V and absolute maximum VB-25 V to VB+0.3 V.
7 HO output High-side gate drive output, referenced to VS and limited to VS-0.3 V to VB+0.3 V absolute maximum.
8 VB power_in High-side floating supply voltage with 725 V absolute maximum and a recommended range of VS+10 V to VS+20 V.

Key specifications

Parameter Value
Manufacturer JSMSEMI
Package SOP-8
Category Motor Driver ICs
Pins 8

CAD (KiCad official)

  • Symbol: FAN7380MX-JSM
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: fan7380mx-jsm-etched.step / fan7380mx-jsm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fan7380mx-jsm.step / fan7380mx-jsm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JSMSEMI datasheet (7 pp, sha256 9c1bd57c2521be43, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF