FAN6300AMY

{
  "slug": "fan6300amy",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "fan6300amy",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "fan6300amy.kicad_sym",
    "fan6300amy.kicad_mod",
    "fan6300amy.glb",
    "fan6300amy.step",
    "fan6300amy.lbr",
    "docs/hero.png",
    "docs/fan6300amy-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "fan6300amy-hero.glb",
    "fan6300amy-hero.overlay.json",
    "fan6300amy-etched.glb"
  ],
  "component": {
    "mpn": "FAN6300AMY",
    "manufacturer": "onsemi",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588879881899401216",
    "parts": {
      "symbol": "fan6300amy.kicad_sym",
      "footprint": "fan6300amy.kicad_mod",
      "model_3d": "fan6300amy-hero.glb",
      "model_3d_plain": "fan6300amy-etched.glb",
      "model_3d_step": "fan6300amy-etched.step",
      "model_3d_step_plain": "fan6300amy.step",
      "lbr": "fan6300amy.lbr"
    },
    "distributor_links": {
      "lcsc": "C10876",
      "digikey": "FAN6300AMYTR-ND",
      "mouser": "512-FAN6300AMY"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T04:11:23Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "FAN6300AMYTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "512-FAN6300AMY",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DET",
        "type": "input",
        "description": "Auxiliary-winding sense input through a resistor divider for zero-current detection, valley-voltage switching and output OVP (2.5 V reference), with the DET pin clamped to 0.3 V when VAUX is negative."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Voltage-loop feedback input with a 5 kΩ equivalent input impedance, which performs open-loop protection when FB exceeds about 4.2 V for more than 55 ms."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Over-current comparator input that senses the switching current through a sense resistor for cycle-by-cycle current limiting, clamped to about 5.0 V when the pin is floating."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Power and signal ground; a 0.1 µF decoupling capacitor between VDD and GND is recommended."
      },
      {
        "number": "5",
        "name": "GATE",
        "type": "output",
        "description": "Totem-pole output that drives the external power MOSFET, with the gate output clamped to 18 V."
      },
      {
        "number": "6",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply with turn-on and turn-off thresholds of 16 V and 10 V, a startup current below 20 µA and an operating current below 4.5 mA."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      },
      {
        "number": "8",
        "name": "HV",
        "type": "power_in",
        "description": "High-voltage startup pin, rated to 500 V absolute maximum with a minimum startup voltage of 50 V, typically fed from the line through an external diode and resistor (1N4007 and 100 kΩ recommended)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin definition gives operating current below 4.5 mA, but the electrical table gives IDD-OP typical 4; Pin definition gives the open-loop protection time as 55 ms, while the electrical table gives tD-OLP; The pin definition only says 'High-voltage startup'. The 500 V, 50 V and startup-resistor details we"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0686,
        "at": "2026-10-18T04:10:45"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588879881899401216",
        "pages": 15,
        "sha256": "23d46c29c34492be",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "fan6300amy.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "fan6300amy-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1f096d814bac49798f681da261f5bea180ed635ca6fb9f69fb6f1e59f76d2ef3",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}