component
FAD8253MX
Public Made by Adomby adom
onsemi Gate Drive ICs, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
cc9a6a9
FAD8253MX
onsemi · Gate Drive ICs · SOIC-14
FAD8253MX from onsemi, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Logic ground; logic inputs HIN, LIN and SD are referenced to VSS. |
| 2 | LIN | input | Logic input for the low-side gate driver output, 3.3 V and 5 V compatible, with Schmitt trigger input (VIH max 2.5 V, VIL min 1.2 V). |
| 3 | SD | input | Active-low shutdown control input that turns off both driver outputs when pulled low (VIH max 2.5 V, VIL min 1.2 V). |
| 4 | HIN | input | Logic input for the high-side gate driver output, 3.3 V and 5 V compatible, with Schmitt trigger input (VIH max 2.5 V, VIL min 1.2 V). |
| 5 | FO | output | Open-drain, active-low fault output that reports overcurrent or short-circuit for tFO typ 65 µs (VFOL max 0.8 V at 2 mA). |
| 6 | CSC | input | Short-circuit current detection input with 0.5 V typ reference (VCSCREF 0.45 to 0.6 V) and 210 kΩ typ internal pull-down. |
| 7 | VDD | power_in | Low-side and logic power supply, recommended 4.5 to 18 V (absolute max 25 V), with UVLO positive threshold 12 V typ. |
| 8 | COM | power_in | Low-side driver return (power ground), recommended VDD-22 V to VDD. |
| 9 | LO | output | Low-side driver output with 2.5 A source / 3.4 A sink peak capability, swinging between COM and VDD. |
| 10 | NC | unconnected | No connect pin, left open for high-voltage creepage and clearance. |
| 11 | NC | unconnected | No connect pin, left open for high-voltage creepage and clearance. |
| 12 | VS | power_in | High-side floating supply return, operating up to 1200 V, with allowable negative VS of -10 V (VBS = 15 V). |
| 13 | HO | output | High-side driver output, swinging between VS and VB. |
| 14 | VB | power_in | High-side floating supply, absolute max 1225 V, with VBS UVLO positive threshold 11.7 V typ. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-14 |
| Category | Power Supply Chip |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent VDD Supply Current | IQDD | 280 | 400 | A | VLIN = 0 V or 5 V | 5 | |
| Operating VDD Supply Current | IPDD | 660 | 800 | A | CL = 1 nF, fLIN = 20 kHz, rms value | 5 | |
| VDD UVLO Positive-going Threshold | VDDUV+ | 11 | 12 | 12.9 | V | VDD = Rising | 5 |
| VDD UVLO Negative-going Threshold | VDDUV- | 10.5 | 11.4 | 12.4 | V | VDD = Falling | 5 |
| Quiescent VBS Supply Current | IQBS | 25 | 45 | A | VHIN = 0 V or 5 V | 5 | |
| Operating VBS Supply Current | IPBS | 430 | 550 | A | CL = 1 nF, fHIN = 20 kHz, rms value | 5 | |
| Offset Supply Leakage Current | ILK | 120 | A | VB = VS = 1200 V | 5 | ||
| VBS UVLO Positive-going Threshold | VBSUV+ | 10.6 | 11.7 | 12.5 | V | VBS = Rising | 5 |
| VBS UVLO Negative-going Threshold | VBSUV- | 10.1 | 11.1 | 11.9 | V | VBS = Falling | 5 |
| High-level Output Voltage | VOH | 50 | mV | IO = 0 mA (No Load) | 5 | ||
| Low-level Output Voltage | VOL | 50 | mV | IO = 0 mA (No Load) | 5 | ||
| Output HIGH Short-circuit Pulsed Current | IO+ | 1200 | 2700 | mA | VO = 0 V, VIN = 5 V with PW < 10 s | 5 | |
| Output LOW Short-circuit Pulsed Current | IO- | 1200 | 4200 | mA | VO = 15 V, VIN = 0 V with PW < 10 s | 5 | |
| Allowable Negative VS Pin Voltage | VS | -10 | V | VBS = 15 V | 5 | ||
| Allowable Transient Negative VS Pin Voltage | VS | -15 | V | VBS = 15 V | 5 | ||
| Allowable COM-VSS Offset | COM-VSS | -7 | V | VDD = 15 V, VSS = 0 V | 5 | ||
| Logic 1 Input Voltage Threshold | VIH | 2.5 | V | 5 | |||
| Logic 0 Input Voltage Threshold | VIL | 1.2 | V | 5 | |||
| Logic 0 Input Bias Current (HIN, LIN) | IIN- | 2 | A | VIN = 0 V | 5 | ||
| Logic 0 Input Bias Current (SD) | ISD- | 2 | A | VSD = 0 V | 5 | ||
| Short-circuit detector reference voltage | VCSCREF | 0.45 | 0.5 | 0.6 | V | 5 | |
| Short-Circuit Input Current | ICSCIN | 15 | 23.5 | 37.5 | A | VCSCIN = 5 V | 5 |
| Soft Turn-off Source Current | ISOFT | 70 | 110 | 140 | mA | VDD = 15 V, LO = 7.5 V | 5 |
| Fault Output High Level Voltage | VFOH | 4.7 | V | VCSC = 0 V, RPULL-UP = 4.7 k | 6 | ||
| Fault Output Low Level Voltage | VFOL | 0.8 | V | VCSC = 1 V, IFO = 2 mA | 6 | ||
| Turn-on Propagation Delay | ton | 65 | 100 | 145 | ns | VS = 0 V | 6 |
| Turn-off Propagation Delay | toff | 65 | 90 | 145 | ns | VS = 0 V or 1200 V | 6 |
| SD to Low-side Propagation Delay | tSDOFF_LO | 25 | 45 | 70 | ns | 6 | |
| SD to High-side Propagation Delay | tSDOFF_HO | 65 | 95 | 145 | ns | 6 | |
| Turn-on Rise Time | tr | 13 | 25 | ns | 6 | ||
| Turn-off Fall Time | tf | 15 | 26 | ns | 6 | ||
| Delay Matching HO and LO Turn-On | MtON | 25 | ns | 6 | |||
| Delay Matching HO and LO Turn-Off | MtOFF | 25 | ns | 6 | |||
| Dead-time | DT | 70 | 120 | 200 | ns | 6 | |
| Time from CSC Triggering to FO | tCSCFO | 530 | 1250 | ns | 6 | ||
| Fault Output Pulse Width | tFO | 24 | 65 | 140 | s | 6 | |
| Time from CSC Triggering to Low-side and High-side Gate Output | tCSCLO | 600 | 1350 | ns | From VCSC = 1 V to starting gate turn-off | 6 | |
| High-side Floating Supply Voltage | VB | -0.3 | 1225 | V | TA = 25°C | 4 | |
| Low-side and Logic-fixed Supply Voltage | VDD | -0.3 | 25 | V | TA = 25°C | 4 | |
| Allowable Offset Voltage Slew Rate | dVS/dt | 50 | V/ns | TA = 25°C | 4 | ||
| Power Dissipation (SO14NB) | PD | 0.8 | W | TA = 25°C | 4 | ||
| Junction Temperature | TJ(max) | 150 | °C | 4 | |||
| Storage Temperature | TSTG | -55 | 150 | °C | 4 | ||
| ESD Human Body Model | ESDHBM | 2500 | V | 4 | |||
| ESD Charged Device Model | ESDCDM | 750 | V | 4 | |||
| Supply Voltage Range | VDD | 4.5 | 18 | V | Referenced to VSS | 4 | |
| High-Side VS Floating Supply Offset Voltage | VS | 1200 | V | Referenced to VSS | 4 | ||
| High-side VBS Bootstrap Voltage | VBS | 22 | V | Referenced to VSS | 4 | ||
| Low-Side and Logic Supply Voltage | VDD | 22 | V | Referenced to VSS | 4 | ||
| Ambient Temperature | TA | -40 | 125 | °C | 4 | ||
| Thermal Resistance, Junction-to-Ambient (SO14NB) | θJA | 156 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
FAD8253MX - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
fad8253mx-etched.step/fad8253mx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fad8253mx.step/fad8253mx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (19 pp, sha256
877fd3942b49f049, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FAD8253MX
**onsemi** · Gate Drive ICs · SOIC-14
FAD8253MX from onsemi, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Logic ground; logic inputs HIN, LIN and SD are referenced to VSS. |
| 2 | LIN | input | Logic input for the low-side gate driver output, 3.3 V and 5 V compatible, with Schmitt trigger input (VIH max 2.5 V, VIL min 1.2 V). |
| 3 | SD | input | Active-low shutdown control input that turns off both driver outputs when pulled low (VIH max 2.5 V, VIL min 1.2 V). |
| 4 | HIN | input | Logic input for the high-side gate driver output, 3.3 V and 5 V compatible, with Schmitt trigger input (VIH max 2.5 V, VIL min 1.2 V). |
| 5 | FO | output | Open-drain, active-low fault output that reports overcurrent or short-circuit for tFO typ 65 µs (VFOL max 0.8 V at 2 mA). |
| 6 | CSC | input | Short-circuit current detection input with 0.5 V typ reference (VCSCREF 0.45 to 0.6 V) and 210 kΩ typ internal pull-down. |
| 7 | VDD | power_in | Low-side and logic power supply, recommended 4.5 to 18 V (absolute max 25 V), with UVLO positive threshold 12 V typ. |
| 8 | COM | power_in | Low-side driver return (power ground), recommended VDD-22 V to VDD. |
| 9 | LO | output | Low-side driver output with 2.5 A source / 3.4 A sink peak capability, swinging between COM and VDD. |
| 10 | NC | unconnected | No connect pin, left open for high-voltage creepage and clearance. |
| 11 | NC | unconnected | No connect pin, left open for high-voltage creepage and clearance. |
| 12 | VS | power_in | High-side floating supply return, operating up to 1200 V, with allowable negative VS of -10 V (VBS = 15 V). |
| 13 | HO | output | High-side driver output, swinging between VS and VB. |
| 14 | VB | power_in | High-side floating supply, absolute max 1225 V, with VBS UVLO positive threshold 11.7 V typ. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-14 |
| Category | Power Supply Chip |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent VDD Supply Current | IQDD | | 280 | 400 | A | VLIN = 0 V or 5 V | 5 |
| Operating VDD Supply Current | IPDD | | 660 | 800 | A | CL = 1 nF, fLIN = 20 kHz, rms value | 5 |
| VDD UVLO Positive-going Threshold | VDDUV+ | 11 | 12 | 12.9 | V | VDD = Rising | 5 |
| VDD UVLO Negative-going Threshold | VDDUV- | 10.5 | 11.4 | 12.4 | V | VDD = Falling | 5 |
| Quiescent VBS Supply Current | IQBS | | 25 | 45 | A | VHIN = 0 V or 5 V | 5 |
| Operating VBS Supply Current | IPBS | | 430 | 550 | A | CL = 1 nF, fHIN = 20 kHz, rms value | 5 |
| Offset Supply Leakage Current | ILK | | | 120 | A | VB = VS = 1200 V | 5 |
| VBS UVLO Positive-going Threshold | VBSUV+ | 10.6 | 11.7 | 12.5 | V | VBS = Rising | 5 |
| VBS UVLO Negative-going Threshold | VBSUV- | 10.1 | 11.1 | 11.9 | V | VBS = Falling | 5 |
| High-level Output Voltage | VOH | | | 50 | mV | IO = 0 mA (No Load) | 5 |
| Low-level Output Voltage | VOL | | | 50 | mV | IO = 0 mA (No Load) | 5 |
| Output HIGH Short-circuit Pulsed Current | IO+ | 1200 | 2700 | | mA | VO = 0 V, VIN = 5 V with PW < 10 s | 5 |
| Output LOW Short-circuit Pulsed Current | IO- | 1200 | 4200 | | mA | VO = 15 V, VIN = 0 V with PW < 10 s | 5 |
| Allowable Negative VS Pin Voltage | VS | -10 | | | V | VBS = 15 V | 5 |
| Allowable Transient Negative VS Pin Voltage | VS | -15 | | | V | VBS = 15 V | 5 |
| Allowable COM-VSS Offset | COM-VSS | -7 | | | V | VDD = 15 V, VSS = 0 V | 5 |
| Logic 1 Input Voltage Threshold | VIH | | | 2.5 | V | | 5 |
| Logic 0 Input Voltage Threshold | VIL | 1.2 | | | V | | 5 |
| Logic 0 Input Bias Current (HIN, LIN) | IIN- | | | 2 | A | VIN = 0 V | 5 |
| Logic 0 Input Bias Current (SD) | ISD- | | | 2 | A | VSD = 0 V | 5 |
| Short-circuit detector reference voltage | VCSCREF | 0.45 | 0.5 | 0.6 | V | | 5 |
| Short-Circuit Input Current | ICSCIN | 15 | 23.5 | 37.5 | A | VCSCIN = 5 V | 5 |
| Soft Turn-off Source Current | ISOFT | 70 | 110 | 140 | mA | VDD = 15 V, LO = 7.5 V | 5 |
| Fault Output High Level Voltage | VFOH | 4.7 | | | V | VCSC = 0 V, RPULL-UP = 4.7 k | 6 |
| Fault Output Low Level Voltage | VFOL | | | 0.8 | V | VCSC = 1 V, IFO = 2 mA | 6 |
| Turn-on Propagation Delay | ton | 65 | 100 | 145 | ns | VS = 0 V | 6 |
| Turn-off Propagation Delay | toff | 65 | 90 | 145 | ns | VS = 0 V or 1200 V | 6 |
| SD to Low-side Propagation Delay | tSDOFF_LO | 25 | 45 | 70 | ns | | 6 |
| SD to High-side Propagation Delay | tSDOFF_HO | 65 | 95 | 145 | ns | | 6 |
| Turn-on Rise Time | tr | | 13 | 25 | ns | | 6 |
| Turn-off Fall Time | tf | | 15 | 26 | ns | | 6 |
| Delay Matching HO and LO Turn-On | MtON | | | 25 | ns | | 6 |
| Delay Matching HO and LO Turn-Off | MtOFF | | | 25 | ns | | 6 |
| Dead-time | DT | 70 | 120 | 200 | ns | | 6 |
| Time from CSC Triggering to FO | tCSCFO | | 530 | 1250 | ns | | 6 |
| Fault Output Pulse Width | tFO | 24 | 65 | 140 | s | | 6 |
| Time from CSC Triggering to Low-side and High-side Gate Output | tCSCLO | | 600 | 1350 | ns | From VCSC = 1 V to starting gate turn-off | 6 |
| High-side Floating Supply Voltage | VB | -0.3 | | 1225 | V | TA = 25°C | 4 |
| Low-side and Logic-fixed Supply Voltage | VDD | -0.3 | | 25 | V | TA = 25°C | 4 |
| Allowable Offset Voltage Slew Rate | dVS/dt | | | 50 | V/ns | TA = 25°C | 4 |
| Power Dissipation (SO14NB) | PD | | | 0.8 | W | TA = 25°C | 4 |
| Junction Temperature | TJ(max) | | | 150 | °C | | 4 |
| Storage Temperature | TSTG | -55 | | 150 | °C | | 4 |
| ESD Human Body Model | ESDHBM | | | 2500 | V | | 4 |
| ESD Charged Device Model | ESDCDM | | | 750 | V | | 4 |
| Supply Voltage Range | VDD | 4.5 | | 18 | V | Referenced to VSS | 4 |
| High-Side VS Floating Supply Offset Voltage | VS | | | 1200 | V | Referenced to VSS | 4 |
| High-side VBS Bootstrap Voltage | VBS | | | 22 | V | Referenced to VSS | 4 |
| Low-Side and Logic Supply Voltage | VDD | | | 22 | V | Referenced to VSS | 4 |
| Ambient Temperature | TA | -40 | | 125 | °C | | 4 |
| Thermal Resistance, Junction-to-Ambient (SO14NB) | θJA | | 156 | | °C/W | | 4 |
## CAD (KiCad official)
- Symbol: `FAD8253MX`
- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`
- 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files: `fad8253mx-etched.step` / `fad8253mx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fad8253mx.step` / `fad8253mx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/fad8253mx-d.pdf) (19 pp, sha256 `877fd3942b49f049`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fad8253mx-datasheet.pdf)