component
F35SQA001G-WWT
Public Made by Adomby adom
FORESEE NAND FLASH, WSON-8-EP(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownF35SQA001G-WWT
FORESEE · NAND FLASH · WSON-8-EP(6x8)
F35SQA001G-WWT from FORESEE, in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select enables the device when low and deselects it when high (DO/SIO pins high-Z, standby power); CS# must go high to low after power-up before a new instruction is accepted and must track VCC during ramp up/down. |
| 2 | DO/SIO1 | bidirectional | Serial Data Output in standard SPI (data shifted out on the falling edge of CLK) and bidirectional SIO1 in Dual and Quad SPI. |
| 3 | WP#/SIO2 | bidirectional | Write Protect prevents the Status Register from being written (with BP[3:0], TB, BPRWD, SP) and becomes SIO2 in Quad SPI; with QE=1 it has no WP# function. |
| 4 | GND | power_in | Ground. |
| 5 | DI/SIO0 | bidirectional | Serial Data Input in standard SPI (latched on the rising edge of CLK) and bidirectional SIO0 in Dual and Quad SPI. |
| 6 | CLK | input | Serial Clock input provides timing for serial input and output operations, up to 104 MHz. |
| 7 | HOLD#/SIO3 | bidirectional | Active-low Hold pauses the device while CS# is low in standard and Dual SPI (DO high-Z, DI and CLK ignored) and becomes SIO3 during Quad SPI operations. |
| 8 | VCC | power_in | Power supply, 2.7V to 3.6V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FORESEE |
| Package | WSON-8-EP(6x8) |
| Category | Memory |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
F35SQA001G-WWT - Footprint:
Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm - 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
f35sqa001g-wwt-etched.step/f35sqa001g-wwt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);f35sqa001g-wwt.step/f35sqa001g-wwt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FORESEE datasheet (43 pp, sha256
d4f0b78fd1dde2d2, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).