component
F280049PMSR
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
ffbbc29
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579
{
"slug": "f280049pmsr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"embedded processors & controllers",
"f280049pmsr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"f280049pmsr.kicad_sym",
"f280049pmsr.kicad_mod",
"f280049pmsr.glb",
"f280049pmsr.step",
"f280049pmsr.lbr",
"docs/hero.png",
"docs/f280049pmsr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"f280049pmsr-hero.glb",
"f280049pmsr-hero.overlay.json",
"f280049pmsr-etched.glb"
],
"component": {
"mpn": "F280049PMSR",
"manufacturer": "Texas Instruments",
"package": "LQFP-64(10x10)",
"pin_count": 64,
"category": "Embedded Processors & Controllers",
"subcategory": "Microcontrollers (MCU/MPU/SOC)",
"datasheet": "https://www.ti.com/cn/lit/gpn/tms320f280045",
"parts": {
"symbol": "f280049pmsr.kicad_sym",
"footprint": "f280049pmsr.kicad_mod",
"model_3d": "f280049pmsr-hero.glb",
"model_3d_plain": "f280049pmsr-etched.glb",
"model_3d_step": "f280049pmsr-etched.step",
"model_3d_step_plain": "f280049pmsr.step",
"lbr": "f280049pmsr.lbr"
},
"distributor_links": {
"lcsc": "C2055960",
"digikey": "296-F280049PMSRTR-ND",
"mouser": "595-F280049PMSR"
},
"distributor_check": {
"checked_at": "2026-11-10T07:47:08Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-F280049PMSRTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-F280049PMSR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GPIO29",
"type": "bidirectional",
"description": "General-purpose I/O 29 (default GPIO function, multiplexed with SCIA_TX, EPWM7_B, EQEP1_B, LINA_RX, ERRORSTS and others); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "2",
"name": "GPIO28",
"type": "bidirectional",
"description": "General-purpose I/O 28 (default GPIO function, multiplexed with SCIA_RX, EPWM7_A, EQEP1_A, LINA_TX, ERRORSTS and others); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "3",
"name": "XRSn",
"type": "bidirectional",
"description": "Device reset input and watchdog reset output (open-drain with internal pullup); a 2.2 kΩ to 10 kΩ resistor must be placed between XRSn and VDDIO, and a capacitor of 100 nF or less may be placed to VSS for noise filtering."
},
{
"number": "4",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply pin; TI recommends a total decoupling capacitance of about 20 µF near the VDD pins."
},
{
"number": "5",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; must be connected to the board ground."
},
{
"number": "6",
"name": "A6",
"type": "input",
"description": "ADC-A analog input 6 (also PGA5_OF filter output and CMPSS-5 comparator input, and AIO228 digital input); 3.3 V analog input referenced to VSSA."
},
{
"number": "7",
"name": "B2",
"type": "input",
"description": "ADC-B analog input 2, also multiplexed with C6 (ADC-C input 6) and PGA3_OF filter output, and AIO226 digital input."
},
{
"number": "8",
"name": "B3",
"type": "input",
"description": "ADC-B analog input 3, also multiplexed with VDAC, an optional external reference for the on-chip DAC; a 100 pF capacitor to VSSA is always present and at least one 1 µF capacitor is required if VDAC is used as DAC reference."
},
{
"number": "9",
"name": "A2",
"type": "input",
"description": "ADC-A analog input 2, also multiplexed with B6 (ADC-B input 6), PGA1_OF filter output and AIO224 digital input."
},
{
"number": "10",
"name": "PGA1_GND",
"type": "power_in",
"description": "PGA-1 Kelvin ground reference shared with PGA3_GND and PGA5_GND; ideally equal to VSSA and should be bound to VSSA when unused."
},
{
"number": "11",
"name": "C4",
"type": "input",
"description": "ADC-C analog input 4, also multiplexed with PGA5_IN (PGA-5 input) and CMPSS-5 comparator inputs, and AIO239 digital input."
},
{
"number": "12",
"name": "C0",
"type": "input",
"description": "ADC-C analog input 0, also multiplexed with PGA1_IN (PGA-1 input) and CMPSS-1 comparator inputs, and AIO237 digital input."
},
{
"number": "13",
"name": "C2",
"type": "input",
"description": "ADC-C analog input 2, also multiplexed with PGA3_IN (PGA-3 input) and CMPSS-3 comparator inputs, and AIO244 digital input."
},
{
"number": "14",
"name": "A1",
"type": "input",
"description": "ADC-A analog input 1, also multiplexed with buffered DAC-B output DACB_OUT and AIO232 digital input."
},
{
"number": "15",
"name": "A0",
"type": "input",
"description": "ADC-A analog input 0, also multiplexed with ADC-B input B15, ADC-C input C15, buffered DAC-A output DACA_OUT and AIO231 digital input."
},
{
"number": "16",
"name": "VREFHIA",
"type": "bidirectional",
"description": "ADC-A high reference; driven externally in external-reference mode or generated by the device in internal-reference mode, with at least one 2.2 µF capacitor between VREFHIA and VREFLOA, and must not be loaded externally. Shared pin position with VREFHIB/VREFHIC on this package."
},
{
"number": "17",
"name": "VREFLOA",
"type": "input",
"description": "ADC-A low reference, shared with VREFLOB and VREFLOC on this package; bind to VSSA when used."
},
{
"number": "18",
"name": "C1",
"type": "input",
"description": "ADC-C analog input 1, also multiplexed with PGA2_IN (PGA-2 input) and CMPSS-2 comparator inputs, and AIO238 digital input."
},
{
"number": "19",
"name": "C3",
"type": "input",
"description": "ADC-C analog input 3, also multiplexed with PGA4_IN (PGA-4 input) and CMPSS-4 comparator inputs, and AIO245 digital input."
},
{
"number": "20",
"name": "PGA2_GND",
"type": "power_in",
"description": "Shared PGA-2, PGA-4 and PGA-6 Kelvin ground reference; ideally equal to VSSA and should be bound to VSSA when unused."
},
{
"number": "21",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground for the ADC, DAC, PGA and CMPSS subsystems."
},
{
"number": "22",
"name": "VDDA",
"type": "power_in",
"description": "3.3 V analog supply pin; a decoupling capacitor of at least 2.2 µF to VSSA is required on each VDDA pin."
},
{
"number": "23",
"name": "A4",
"type": "input",
"description": "ADC-A analog input 4, also multiplexed with B8 (ADC-B input 8), PGA2_OF filter output and AIO225 digital input."
},
{
"number": "24",
"name": "B4",
"type": "input",
"description": "ADC-B analog input 4, also multiplexed with C8 (ADC-C input 8), PGA4_OF filter output and AIO227 digital input."
},
{
"number": "25",
"name": "A10",
"type": "input",
"description": "ADC-A analog input 10, also multiplexed with B1, C10 and PGA7_OF filter output, and AIO230 digital input."
},
{
"number": "26",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin; must be connected to the board ground."
},
{
"number": "27",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply pin; decoupling capacitance required near each VDD pin."
},
{
"number": "28",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply pin; a decoupling capacitor of at least 0.1 µF is required on each VDDIO pin."
},
{
"number": "29",
"name": "GPIO13",
"type": "bidirectional",
"description": "General-purpose I/O 13 (multiplexed with EPWM7_B, CANB_RX, EQEP1_INDEX, SCIB_RX, PMBUSA_ALERT as open-drain and FSIRXA_CLK); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "30",
"name": "GPIO12",
"type": "bidirectional",
"description": "General-purpose I/O 12 (multiplexed with EPWM7_A, CANB_TX, EQEP1_STROBE, SCIB_TX, PMBUSA_CTL and FSIRXA_D0); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "31",
"name": "GPIO11",
"type": "bidirectional",
"description": "General-purpose I/O 11 (multiplexed with EPWM6_B, SCIB_RX, OUTPUTXBAR7, EQEP1_B, SPIA_STE and FSIRXA_D1); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "32",
"name": "GPIO33",
"type": "bidirectional",
"description": "General-purpose I/O 33 (multiplexed with I2CA_SCL open-drain, SPIB_STE, OUTPUTXBAR4, LINA_RX, SD1_C3, FSIRXA_CLK and CANA_RX); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "33",
"name": "GPIO16",
"type": "bidirectional",
"description": "General-purpose I/O 16 (multiplexed with SPIA_SIMO, CANB_TX, OUTPUTXBAR7, EPWM5_A, SCIA_TX, SD1_D1, XCLKOUT and others); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "34",
"name": "GPIO17",
"type": "bidirectional",
"description": "General-purpose I/O 17 (multiplexed with SPIA_SOMI, CANB_RX, OUTPUTXBAR8, EPWM5_B, SCIA_RX, SD1_C1, EQEP1_INDEX and PMBUSA_SDA); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "35",
"name": "GPIO24",
"type": "bidirectional",
"description": "General-purpose I/O 24 (multiplexed with OUTPUTXBAR1, EQEP2_A, EPWM8_A, SPIB_SIMO, SD1_D1, PMBUSA_SCL, SCIA_TX and ERRORSTS); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "36",
"name": "TCK",
"type": "input",
"description": "JTAG test clock input with internal pullup enabled at reset."
},
{
"number": "37",
"name": "GPIO37/TDO",
"type": "output",
"description": "JTAG test data output (TDO) by default; the pin is tri-stated when no JTAG activity is present, so an internal pullup or external pullup is recommended; can alternatively be used as GPIO37."
},
{
"number": "38",
"name": "TMS",
"type": "bidirectional",
"description": "JTAG test mode select with internal pullup; an external pullup of about 2.2 kΩ to VDDIO is recommended to hold JTAG in reset during normal operation."
},
{
"number": "39",
"name": "GPIO35/TDI",
"type": "input",
"description": "JTAG test data input (TDI) by default with internal pullup disabled; enable the internal pullup or add an external pullup when used as TDI to avoid a floating input; can alternatively be used as GPIO35."
},
{
"number": "40",
"name": "GPIO32",
"type": "bidirectional",
"description": "General-purpose I/O 32 (multiplexed with I2CA_SDA open-drain, SPIB_CLK, EPWM8_B, LINA_TX, SD1_D3, FSIRXA_D0 and CANA_TX); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "41",
"name": "GPIO18_X2",
"type": "bidirectional",
"description": "General-purpose I/O 18 or crystal oscillator output X2; the GPIO function is only usable when the system is clocked from INTOSC and X1 has an external pulldown (recommended 1 kΩ)."
},
{
"number": "42",
"name": "X1",
"type": "bidirectional",
"description": "Crystal oscillator input or single-ended 3.3 V clock input; the device initialization software must configure this pin before enabling the crystal oscillator, and GPIO19 must not be used on this pin."
},
{
"number": "43",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply pin; a decoupling capacitor of at least 0.1 µF is required on each VDDIO pin."
},
{
"number": "44",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply pin; decoupling capacitance required near each VDD pin."
},
{
"number": "45",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin; must be connected to the board ground."
},
{
"number": "46",
"name": "VREGENZ",
"type": "input",
"description": "Internal regulator enable with internal pulldown; tie to VSS to enable the internal VREG, or to VDDIO to use an external VDD supply."
},
{
"number": "47",
"name": "GPIO8",
"type": "bidirectional",
"description": "General-purpose I/O 8 (multiplexed with EPWM5_A, CANB_TX, ADCSOCAO, EQEP1_STROBE, SCIA_TX, SPIA_SIMO, I2CA_SCL open-drain and FSITXA_D1); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "48",
"name": "GPIO4",
"type": "bidirectional",
"description": "General-purpose I/O 4 (multiplexed with EPWM3_A, OUTPUTXBAR3, CANA_TX and FSIRXA_CLK); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "49",
"name": "GPIO3",
"type": "bidirectional",
"description": "General-purpose I/O 3 (multiplexed with EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL open-drain, SPIA_CLK, SCIA_RX and FSIRXA_D0); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "50",
"name": "GPIO2",
"type": "bidirectional",
"description": "General-purpose I/O 2 (multiplexed with EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA open-drain, SCIA_TX and FSIRXA_D1); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "51",
"name": "GPIO1",
"type": "bidirectional",
"description": "General-purpose I/O 1 (multiplexed with EPWM1_B and I2CA_SCL open-drain); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "52",
"name": "GPIO0",
"type": "bidirectional",
"description": "General-purpose I/O 0 (multiplexed with EPWM1_A and I2CA_SDA open-drain); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "53",
"name": "VDDIO_SW",
"type": "power_in",
"description": "3.3 V supply for the internal DC/DC regulator; a 20 µF bulk input capacitor is required when the DC/DC is used and this pin must be connected to VDDIO."
},
{
"number": "54",
"name": "GPIO23_VSW",
"type": "bidirectional",
"description": "General-purpose I/O 23 by default configured as the DC/DC switch output VSW when the internal DC/DC regulator is enabled; the pin has about 100 pF internal capacitance and is not recommended for fast-switching GPIO use."
},
{
"number": "55",
"name": "VSS_SW",
"type": "power_in",
"description": "Internal DC/DC regulator ground; must be connected to the VSS pin."
},
{
"number": "56",
"name": "GPIO22_VFBSW",
"type": "bidirectional",
"description": "General-purpose I/O 22 by default configured as the DC/DC feedback input VFBSW when the internal DC/DC regulator is enabled; if the DC/DC is unused it can be used as GPIO22."
},
{
"number": "57",
"name": "GPIO7",
"type": "bidirectional",
"description": "General-purpose I/O 7 (multiplexed with EPWM4_B, OUTPUTXBAR5, EQEP1_B, CANB_RX, SPIB_SIMO and FSITXA_CLK); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "58",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin; must be connected to the board ground."
},
{
"number": "59",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply pin; decoupling capacitance required near each VDD pin."
},
{
"number": "60",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply pin; a decoupling capacitor of at least 0.1 µF is required on each VDDIO pin."
},
{
"number": "61",
"name": "GPIO5",
"type": "bidirectional",
"description": "General-purpose I/O 5 (multiplexed with EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE and FSITXA_D1); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "62",
"name": "GPIO9",
"type": "bidirectional",
"description": "General-purpose I/O 9 (multiplexed with EPWM5_B, SCIB_TX, OUTPUTXBAR6, EQEP1_INDEX, SCIA_RX, SPIA_CLK and FSITXA_D0); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "63",
"name": "GPIO10",
"type": "bidirectional",
"description": "General-purpose I/O 10 (multiplexed with EPWM6_A, CANB_RX, ADCSOCBO, EQEP1_A, SCIB_TX, SPIA_SOMI, I2CA_SDA open-drain and FSITXA_CLK); 3.3 V I/O with ±4 mA output drive."
},
{
"number": "64",
"name": "GPIO6",
"type": "bidirectional",
"description": "General-purpose I/O 6 (multiplexed with EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, CANB_TX, SPIB_SOMI and FSITXA_D0); 3.3 V I/O with ±4 mA output drive."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pinout taken from Figure 5-2 (F280049/C/M, F280045, F280041/C 64-pin PM, top view), which applies to; Ordering-code mapping of 'F280049PMSR' to the PM package and tape-and-reel (R) option was inferred f; Pins with multiple muxed analog functions (ADC input plus PGA/CMPSS/DAC outputs) are typed as input "
],
"pages_sent": 146,
"cost_usd": 1.0426,
"at": "2026-11-10T07:46:56"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tms320f280045",
"pages": 277,
"sha256": "867e7bb5ada6819c",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 64,
"described": 64,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "f280049pmsr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12.0,
12.0,
1.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "f280049pmsr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12.0,
12.0,
1.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ab2165e413043e1eaa1b21d446441620c2d12cb423a23b0c55d5caa9b735ea63",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "PM0064A",
"source_page": 267,
"D": {
"nom_mm": 10.0,
"range_mm": [
9.8,
10.2
]
},
"E1": {
"nom_mm": 10.0,
"range_mm": [
9.8,
10.2
]
},
"E": {
"nom_mm": 12.0,
"range_mm": [
11.8,
12.2
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.6,
"range_mm": [
null,
1.6
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "f280049pmsr.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}