component
F280049CPMS
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Set visibility: public
330c650
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323
{
"schema_version": 1,
"type": "component",
"slug": "f280049cpms",
"title": "F280049CPMS",
"brief": "Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"embedded processors & controllers",
"f280049cpms",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "F280049CPMS",
"manufacturer": "Texas Instruments",
"package": "LQFP-64(10x10)",
"pin_count": 64,
"category": "Embedded Processors & Controllers",
"subcategory": "Microcontrollers (MCU/MPU/SOC)",
"datasheet": "https://www.ti.com/cn/lit/gpn/tms320f280049",
"parts": {
"symbol": "f280049cpms.kicad_sym",
"footprint": "f280049cpms.kicad_mod",
"model_3d": "f280049cpms-hero.glb",
"model_3d_plain": "f280049cpms-etched.glb",
"model_3d_step": "f280049cpms-etched.step",
"model_3d_step_plain": "f280049cpms.step",
"lbr": "f280049cpms.lbr"
},
"distributor_links": {
"lcsc": "C174293",
"digikey": "296-49637-ND",
"mouser": "595-F280049CPMS"
},
"distributor_check": {
"checked_at": "2026-11-10T07:42:16Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-49637-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-F280049CPMS",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GPIO29",
"type": "bidirectional",
"description": "General-purpose I/O 29 (default GPIO), multiplexed with SCIA_TX, EPWM7_B, EQEP1_B, SPIB_STE, LINA_RX and ERRORSTS."
},
{
"number": "2",
"name": "GPIO28",
"type": "bidirectional",
"description": "General-purpose I/O 28 (default GPIO), multiplexed with SCIA_RX, EPWM7_A, EQEP1_A, LINA_TX, SPIB_CLK and ERRORSTS."
},
{
"number": "3",
"name": "XRSn",
"type": "bidirectional",
"description": "Device reset input and watchdog reset output (open-drain with internal pullup); a 2.2 kΩ to 10 kΩ resistor should be placed between XRSn and VDDIO, and any noise-filter capacitor should be 100 nF or less."
},
{
"number": "4",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply; TI recommends a minimum total capacitance of about 20 µF near the VDD pins."
},
{
"number": "5",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; all VSS pins must be connected to the board ground."
},
{
"number": "6",
"name": "A6/PGA5_OF",
"type": "input",
"description": "ADC-A input 6 (also PGA-5 optional output filter, CMPSS-5 comparator input and AIO228); keep the ADC input below VDDA + 0.3 V."
},
{
"number": "7",
"name": "B2/C6/PGA3_OF",
"type": "input",
"description": "ADC-B input 2 (also ADC-C input 6, PGA-3 optional output filter and CMPSS-3 input); keep the ADC input below VDDA + 0.3 V."
},
{
"number": "8",
"name": "B3/VDAC",
"type": "input",
"description": "ADC-B input 3 and optional external reference for the on-chip DAC; a 100 pF capacitor to VSSA is always present, and at least one 1 µF capacitor is required if used as the DAC reference."
},
{
"number": "9",
"name": "A2/B6/PGA1_OF",
"type": "input",
"description": "ADC-A input 2 (also ADC-B input 6, PGA-1 optional output filter and CMPSS-1 input); keep the ADC input below VDDA + 0.3 V."
},
{
"number": "10",
"name": "PGA1_GND",
"type": "power_in",
"description": "PGA-1, PGA-3 and PGA-5 ground (Kelvin ground reference, ideally equal to VSSA)."
},
{
"number": "11",
"name": "C4/PGA5_IN",
"type": "input",
"description": "ADC-C input 4 (also PGA-5 input and CMPSS-5 input); keep the ADC input below VDDA + 0.3 V."
},
{
"number": "12",
"name": "C0/PGA1_IN",
"type": "input",
"description": "ADC-C input 0 (also PGA-1 input and CMPSS-1 input); keep the ADC input below VDDA + 0.3 V."
},
{
"number": "13",
"name": "C2/PGA3_IN",
"type": "input",
"description": "ADC-C input 2 (also PGA-3 input and CMPSS-3 input); keep the ADC input below VDDA + 0.3 V."
},
{
"number": "14",
"name": "A1/DACB_OUT",
"type": "input",
"description": "ADC-A input 1 (also buffered DAC-B output and AIO232); keep the ADC input below VDDA + 0.3 V."
},
{
"number": "15",
"name": "A0/B15/C15/DACA_OUT",
"type": "input",
"description": "ADC-A input 0 (also ADC-B input 15, ADC-C input 15, buffered DAC-A output and AIO231); keep the ADC input below VDDA + 0.3 V."
},
{
"number": "16",
"name": "VREFHIA",
"type": "bidirectional",
"description": "ADC-A/B/C high reference; drive externally in external-reference mode, device-driven in internal-reference mode, place at least 2.2 µF between each VREFHIx and its VREFLOx pin, and do not load externally."
},
{
"number": "17",
"name": "VREFLOA",
"type": "input",
"description": "ADC-A/B/C low reference voltage; unused VREFLOx pins are tied to VSSA."
},
{
"number": "18",
"name": "C1/PGA2_IN",
"type": "input",
"description": "ADC-C input 1 (also PGA-2 input and CMPSS-2 input); keep the ADC input below VDDA + 0.3 V."
},
{
"number": "19",
"name": "C3/PGA4_IN",
"type": "input",
"description": "ADC-C input 3 (also PGA-4 input and CMPSS-4 input); keep the ADC input below VDDA + 0.3 V."
},
{
"number": "20",
"name": "PGA2_GND",
"type": "power_in",
"description": "PGA-2, PGA-4 and PGA-6 ground (Kelvin ground reference, ideally equal to VSSA)."
},
{
"number": "21",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground."
},
{
"number": "22",
"name": "VDDA",
"type": "power_in",
"description": "3.3 V analog supply; place a minimum 2.2 µF decoupling capacitor connected to VSSA on each VDDA pin."
},
{
"number": "23",
"name": "A4/B8/PGA2_OF",
"type": "input",
"description": "ADC-A input 4 (also ADC-B input 8, PGA-2 optional output filter and CMPSS-2 input); keep the ADC input below VDDA + 0.3 V."
},
{
"number": "24",
"name": "B4/C8/PGA4_OF",
"type": "input",
"description": "ADC-B input 4 (also ADC-C input 8, PGA-4 optional output filter and CMPSS-4 input); keep the ADC input below VDDA + 0.3 V."
},
{
"number": "25",
"name": "A10/B1/C10/PGA7_OF",
"type": "input",
"description": "ADC-A input 10 (also ADC-B input 1, ADC-C input 10 and PGA-7 optional output filter); keep the ADC input below VDDA + 0.3 V."
},
{
"number": "26",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; all VSS pins must be connected to the board ground."
},
{
"number": "27",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply; TI recommends a minimum total capacitance of about 20 µF near the VDD pins."
},
{
"number": "28",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply; place a minimum 0.1 µF decoupling capacitor on each VDDIO pin."
},
{
"number": "29",
"name": "GPIO13",
"type": "bidirectional",
"description": "General-purpose I/O 13 (default GPIO), multiplexed with EPWM7_B, CANB_RX, EQEP1_INDEX, SCIB_RX, PMBUSA_ALERT and FSIRXA_CLK."
},
{
"number": "30",
"name": "GPIO12",
"type": "bidirectional",
"description": "General-purpose I/O 12 (default GPIO), multiplexed with EPWM7_A, CANB_TX, EQEP1_STROBE, SCIB_TX, PMBUSA_CTL and FSIRXA_D0."
},
{
"number": "31",
"name": "GPIO11",
"type": "bidirectional",
"description": "General-purpose I/O 11 (default GPIO), multiplexed with EPWM6_B, SCIB_RX, OUTPUTXBAR7, EQEP1_B, SPIA_STE and FSIRXA_D1."
},
{
"number": "32",
"name": "GPIO33",
"type": "bidirectional",
"description": "General-purpose I/O 33 (default GPIO), multiplexed with I2CA_SCL, SPIB_STE, OUTPUTXBAR4, LINA_RX, SD1_C3, FSIRXA_CLK and CANA_RX."
},
{
"number": "33",
"name": "GPIO16",
"type": "bidirectional",
"description": "General-purpose I/O 16 (default GPIO), multiplexed with SPIA_SIMO, CANB_TX, OUTPUTXBAR7, EPWM5_A, SCIA_TX, SD1_D1, EQEP1_STROBE, PMBUSA_SCL and XCLKOUT."
},
{
"number": "34",
"name": "GPIO17",
"type": "bidirectional",
"description": "General-purpose I/O 17 (default GPIO), multiplexed with SPIA_SOMI, CANB_RX, OUTPUTXBAR8, EPWM5_B, SCIA_RX, SD1_C1, EQEP1_INDEX and PMBUSA_SDA."
},
{
"number": "35",
"name": "GPIO24",
"type": "bidirectional",
"description": "General-purpose I/O 24 (default GPIO), multiplexed with OUTPUTXBAR1, EQEP2_A, EPWM8_A, SPIB_SIMO, SD1_D1, PMBUSA_SCL, SCIA_TX and ERRORSTS."
},
{
"number": "36",
"name": "TCK",
"type": "input",
"description": "JTAG test clock input with internal pullup."
},
{
"number": "37",
"name": "GPIO37/TDO",
"type": "output",
"description": "JTAG test data output (TDO, default function); the pin is tri-stated when there is no JTAG activity, so an internal or external pullup is required to avoid a floating GPIO input."
},
{
"number": "38",
"name": "TMS",
"type": "bidirectional",
"description": "JTAG test mode select with internal pullup, clocked on TCK rising edge; a 2.2 kΩ external pullup to VDDIO is recommended on the board."
},
{
"number": "39",
"name": "GPIO35/TDI",
"type": "input",
"description": "JTAG test data input (TDI, default function); enable the internal pullup or add an external pullup to avoid a floating input."
},
{
"number": "40",
"name": "GPIO32",
"type": "bidirectional",
"description": "General-purpose I/O 32 (default GPIO), multiplexed with I2CA_SDA, SPIB_CLK, EPWM8_B, LINA_TX, SD1_D3, FSIRXA_D0 and CANA_TX."
},
{
"number": "41",
"name": "GPIO18_X2",
"type": "bidirectional",
"description": "General-purpose I/O 18 also serving as the X2 crystal oscillator output; GPIO18 and its mux options are usable only when INTOSC clocks the system and X1 has an external pull-down (1 kΩ recommended)."
},
{
"number": "42",
"name": "X1",
"type": "bidirectional",
"description": "Crystal oscillator or single-ended 3.3 V clock input; device initialization software must configure this pin before enabling the crystal oscillator."
},
{
"number": "43",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply; place a minimum 0.1 µF decoupling capacitor on each VDDIO pin."
},
{
"number": "44",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply; TI recommends a minimum total capacitance of about 20 µF near the VDD pins."
},
{
"number": "45",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; all VSS pins must be connected to the board ground."
},
{
"number": "46",
"name": "VREGENZ",
"type": "input",
"description": "Internal regulator enable with internal pulldown; tie to VSS to enable the internal VREG and to VDDIO to use an external VDD supply."
},
{
"number": "47",
"name": "GPIO8",
"type": "bidirectional",
"description": "General-purpose I/O 8 (default GPIO), multiplexed with EPWM5_A, CANB_TX, ADCSOCAO, EQEP1_STROBE, SCIA_TX, SPIA_SIMO, I2CA_SCL and FSITXA_D1."
},
{
"number": "48",
"name": "GPIO4",
"type": "bidirectional",
"description": "General-purpose I/O 4 (default GPIO), multiplexed with EPWM3_A, OUTPUTXBAR3, CANA_TX and FSIRXA_CLK."
},
{
"number": "49",
"name": "GPIO3",
"type": "bidirectional",
"description": "General-purpose I/O 3 (default GPIO), multiplexed with EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL, SPIA_CLK, SCIA_RX and FSIRXA_D0."
},
{
"number": "50",
"name": "GPIO2",
"type": "bidirectional",
"description": "General-purpose I/O 2 (default GPIO), multiplexed with EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA, SCIA_TX and FSIRXA_D1."
},
{
"number": "51",
"name": "GPIO1",
"type": "bidirectional",
"description": "General-purpose I/O 1 (default GPIO), multiplexed with EPWM1_B and I2CA_SCL."
},
{
"number": "52",
"name": "GPIO0",
"type": "bidirectional",
"description": "General-purpose I/O 0 (default GPIO), multiplexed with EPWM1_A and I2CA_SDA."
},
{
"number": "53",
"name": "VDDIO_SW",
"type": "power_in",
"description": "3.3 V supply for the internal DC/DC regulator; if the DC/DC is used a 20 µF bulk input capacitor is required, and this pin must be tied to VDDIO."
},
{
"number": "54",
"name": "GPIO23_VSW",
"type": "bidirectional",
"description": "General-purpose I/O 23 (default DC/DC mode) that serves as the internal DC/DC switching output VSW when DCDCEN = 1; it has about 100 pF internal capacitance, so an alternate GPIO is recommended where fast switching response is needed."
},
{
"number": "55",
"name": "VSS_SW",
"type": "power_in",
"description": "Internal DC/DC regulator ground; must be tied to VSS."
},
{
"number": "56",
"name": "GPIO22_VFBSW",
"type": "bidirectional",
"description": "General-purpose I/O 22 (default DC/DC mode) that serves as the internal DC/DC feedback VFBSW when DCDCEN = 1; connect it to the node where L(VSW) meets the VDD rail, as close to the device as possible."
},
{
"number": "57",
"name": "GPIO7",
"type": "bidirectional",
"description": "General-purpose I/O 7 (default GPIO), multiplexed with EPWM4_B, OUTPUTXBAR5, EQEP1_B, CANB_RX, SPIB_SIMO and FSITXA_CLK."
},
{
"number": "58",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; all VSS pins must be connected to the board ground."
},
{
"number": "59",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply; TI recommends a minimum total capacitance of about 20 µF near the VDD pins."
},
{
"number": "60",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply; place a minimum 0.1 µF decoupling capacitor on each VDDIO pin."
},
{
"number": "61",
"name": "GPIO5",
"type": "bidirectional",
"description": "General-purpose I/O 5 (default GPIO), multiplexed with EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE and FSITXA_D1."
},
{
"number": "62",
"name": "GPIO9",
"type": "bidirectional",
"description": "General-purpose I/O 9 (default GPIO), multiplexed with EPWM5_B, SCIB_TX, OUTPUTXBAR6, EQEP1_INDEX, SCIA_RX, SPIA_CLK and FSITXA_D0."
},
{
"number": "63",
"name": "GPIO10",
"type": "bidirectional",
"description": "General-purpose I/O 10 (default GPIO), multiplexed with EPWM6_A, CANB_RX, ADCSOCBO, EQEP1_A, SCIB_TX, SPIA_SOMI, I2CA_SDA and FSITXA_CLK."
},
{
"number": "64",
"name": "GPIO6",
"type": "bidirectional",
"description": "General-purpose I/O 6 (default GPIO), multiplexed with EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, CANB_TX, SPIB_SOMI and FSITXA_D0."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Package variant: the MPN F280049CPMS was mapped to the 64-pin PM LQFP using the package hint and the; Q-temperature variant differs: Figure 5-3 (F280048/C, F280040/C Q-temp) places FLT2 on pin 29 and FL; Multi-function pin names are reproduced from the figure labels and the default function is used for "
],
"pages_sent": 146,
"cost_usd": 1.0558,
"at": "2026-11-10T07:42:04"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tms320f280049",
"pages": 277,
"sha256": "867e7bb5ada6819c",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 64,
"described": 64,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "f280049cpms.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12,
12,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "f280049cpms-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12,
12,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "3a5dc3b9eecdd7b9d3abdf914cce71a4e25b110d43e9ca708cdff8722d711fe8",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "PM0064A",
"source_page": 267,
"D": {
"nom_mm": 10,
"range_mm": [
9.8,
10.2
]
},
"E1": {
"nom_mm": 10,
"range_mm": [
9.8,
10.2
]
},
"E": {
"nom_mm": 12,
"range_mm": [
11.8,
12.2
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.6,
"range_mm": [
null,
1.6
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "f280049cpms.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "LQFP-64(10x10)",
"Category": "Embedded Processors & Controllers",
"Pins": "64"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "867e7bb5ada6819cc36164498b50cad22179a747503cd852568bdaf44a4640b7",
"rows": [
{
"name": "VDDIO 以 VSS 为基准 (供电电压,绝对最大额定值)",
"symbol": "VDDIO",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "以 VSS 为基准",
"source_page": 58,
"source": "datasheet"
},
{
"name": "VDDA 以 VSSA 为基准 (供电电压,绝对最大额定值)",
"symbol": "VDDA",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "以 VSSA 为基准",
"source_page": 58,
"source": "datasheet"
},
{
"name": "VDD 以 VSS 为基准 (内核供电电压,绝对最大额定值)",
"symbol": "VDD",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 1.5,
"conditions": "以 VSS 为基准",
"source_page": 58,
"source": "datasheet"
},
{
"name": "VDDIO 和 VDDIO_SW 引脚之间的电压差",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 0.3,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "输入电压 VIN (3.3V)",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "输出电压",
"symbol": "VO",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "数字输入钳位电流(每引脚)",
"symbol": "IIK",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "VIN < VSS 或 VIN > VDDIO",
"source_page": 58,
"source": "datasheet"
},
{
"name": "模拟输入钳位电流(每引脚)",
"symbol": "IIKANALOG",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "VIN < VSSA 或 VIN > VDDA",
"source_page": 58,
"source": "datasheet"
},
{
"name": "所有输入的总计钳位电流",
"symbol": "IIKTOTAL",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "VIN < VSS/VSSA 或 VIN > VDDIO/VDDA",
"source_page": 58,
"source": "datasheet"
},
{
"name": "数字输出电流(每引脚)",
"symbol": "IOUT",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "自然通风温度",
"symbol": "TA",
"kind": "absolute_maximum",
"unit": "°C",
"min": -40,
"typ": null,
"max": 125,
"conditions": "自然通风",
"source_page": 58,
"source": "datasheet"
},
{
"name": "工作结温",
"symbol": "TJ",
"kind": "absolute_maximum",
"unit": "°C",
"min": -40,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "贮存温度",
"symbol": "Tstg",
"kind": "absolute_maximum",
"unit": "°C",
"min": -65,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "器件电源电压 VDDIO 和 VDDA(启用内部 BOR)",
"symbol": "VDDIO, VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": null,
"typ": 3.3,
"max": 3.63,
"conditions": "启用内部 BOR",
"source_page": 59,
"source": "datasheet"
},
{
"name": "器件电源电压 VDDIO 和 VDDA(禁用内部 BOR)",
"symbol": "VDDIO, VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": 2.8,
"typ": 3.3,
"max": 3.63,
"conditions": "禁用内部 BOR",
"source_page": 59,
"source": "datasheet"
},
{
"name": "器件电源电压 VDD",
"symbol": "VDD",
"kind": "recommended_operating",
"unit": "V",
"min": 1.14,
"typ": 1.2,
"max": 1.32,
"conditions": "",
"source_page": 59,
"source": "datasheet"
},
{
"name": "VDDIO 电源斜坡时间",
"symbol": "tVDDIO-RAMP",
"kind": "recommended_operating",
"unit": "ms",
"min": 10,
"typ": null,
"max": null,
"conditions": "从 1V 到 VBOR-VDDIO(MAX)",
"source_page": 59,
"source": "datasheet"
},
{
"name": "结温 TJ(S 版本)",
"symbol": "TJ",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 125,
"conditions": "S 版本",
"source_page": 59,
"source": "datasheet"
},
{
"name": "VDD 运行期间的电流消耗(外部电源)",
"symbol": "IDD",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 61,
"max": 90,
"conditions": "请参阅节 6.5.4",
"source_page": 61,
"source": "datasheet"
},
{
"name": "VDDIO 运行期间的电流消耗(外部电源)",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 26,
"max": 45,
"conditions": "",
"source_page": 61,
"source": "datasheet"
},
{
"name": "VDDA 运行期间的电流消耗(外部电源)",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 12,
"max": 30,
"conditions": "",
"source_page": 61,
"source": "datasheet"
},
{
"name": "器件处于空闲模式时的 VDD 电流消耗",
"symbol": "IDD",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 18,
"max": 40,
"conditions": "CPU 处于空闲模式;闪存被断电;XCLKOUT 被关闭",
"source_page": 61,
"source": "datasheet"
},
{
"name": "器件处于空闲模式时的 VDDIO 电流消耗",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 1.2,
"max": 4,
"conditions": "",
"source_page": 61,
"source": "datasheet"
},
{
"name": "器件处于空闲模式时的 VDDA 电流消耗",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.9,
"max": 1.2,
"conditions": "",
"source_page": 61,
"source": "datasheet"
},
{
"name": "器件处于停机模式时的 VDD 电流消耗",
"symbol": "IDD",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.9,
"max": 20,
"conditions": "CPU 处于停机模式;闪存被断电;XCLKOUT 被关闭",
"source_page": 61,
"source": "datasheet"
},
{
"name": "器件处于停机模式时的 VDDIO 电流消耗",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.8,
"max": 4,
"conditions": "",
"source_page": 61,
"source": "datasheet"
},
{
"name": "器件处于停机模式时的 VDDA 电流消耗",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.2,
"max": 0.5,
"conditions": "",
"source_page": 61,
"source": "datasheet"
},
{
"name": "擦除/编程周期期间的 VDD 电流消耗",
"symbol": "IDD",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 40,
"max": 70,
"conditions": "CPU 从闪存运行擦除/编程;禁用 VREG;SYSCLK 100MHz",
"source_page": 61,
"source": "datasheet"
},
{
"name": "擦除/编程周期期间的 VDDIO 电流消耗",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 33,
"max": 75,
"conditions": "",
"source_page": 61,
"source": "datasheet"
},
{
"name": "擦除/编程周期期间的 VDDA 电流消耗",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.1,
"max": 2.5,
"conditions": "",
"source_page": 61,
"source": "datasheet"
},
{
"name": "VDDIO 运行期间的电流消耗(内部 VREG)",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 86,
"max": 113,
"conditions": "请参阅节 6.5.4",
"source_page": 61,
"source": "datasheet"
},
{
"name": "VDDA 运行期间的电流消耗(内部 VREG)",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 12,
"max": 30,
"conditions": "",
"source_page": 61,
"source": "datasheet"
},
{
"name": "低电平输出电压 (IOL=IOL 最大值)",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.4,
"conditions": "IOL=IOL 最大值",
"source_page": 67,
"source": "datasheet"
},
{
"name": "低电平输出电压 (IOL=100µA)",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.2,
"conditions": "IOL = 100µA",
"source_page": 67,
"source": "datasheet"
},
{
"name": "高电平输入电压 (3.3V)",
"symbol": "VIH",
"kind": "electrical",
"unit": "V",
"min": 2,
"typ": null,
"max": null,
"conditions": "",
"source_page": 67,
"source": "datasheet"
},
{
"name": "低电平输入电压 (3.3V)",
"symbol": "VIL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.8,
"conditions": "",
"source_page": 67,
"source": "datasheet"
},
{
"name": "VDDIO 欠压复位电压",
"symbol": "VBOR-VDDIO",
"kind": "electrical",
"unit": "V",
"min": 2.81,
"typ": null,
"max": 3,
"conditions": "",
"source_page": 67,
"source": "datasheet"
},
{
"name": "内部稳压器输出",
"symbol": "VVREG",
"kind": "electrical",
"unit": "V",
"min": 1.14,
"typ": 1.2,
"max": 1.32,
"conditions": "",
"source_page": 80,
"source": "datasheet"
},
{
"name": "斜降时的 VDDIO 欠压复位电压",
"symbol": "VBOR-VDDIO-DN",
"kind": "electrical",
"unit": "V",
"min": 2.81,
"typ": null,
"max": 3,
"conditions": "XRSn 释放之后",
"source_page": 80,
"source": "datasheet"
},
{
"name": "CL1、CL2 负载电容",
"symbol": "CL1, CL2",
"kind": "electrical",
"unit": "pF",
"min": 12,
"typ": null,
"max": 24,
"conditions": "",
"source_page": 93,
"source": "datasheet"
},
{
"name": "晶振并联电容",
"symbol": "C0",
"kind": "electrical",
"unit": "pF",
"min": null,
"typ": null,
"max": 7,
"conditions": "",
"source_page": 93,
"source": "datasheet"
},
{
"name": "fINTOSC 频率,INTOSC1 和 INTOSC2",
"symbol": "fINTOSC",
"kind": "electrical",
"unit": "MHz",
"min": 9.7,
"typ": 10,
"max": 10.3,
"conditions": "",
"source_page": 94,
"source": "datasheet"
},
{
"name": "室温下的频率稳定性",
"symbol": "fINTOSC-STABILITY",
"kind": "tolerance",
"unit": "%",
"min": -0.1,
"typ": null,
"max": 0.1,
"conditions": "30°C,标称 VDD",
"source_page": 95,
"source": "datasheet"
},
{
"name": "VDD 上的频率稳定性",
"symbol": "fINTOSC-STABILITY",
"kind": "tolerance",
"unit": "%",
"min": -0.2,
"typ": null,
"max": 0.2,
"conditions": "30°C",
"source_page": 95,
"source": "datasheet"
},
{
"name": "频率稳定性",
"symbol": "fINTOSC-STABILITY",
"kind": "tolerance",
"unit": "%",
"min": -3,
"typ": null,
"max": 3,
"conditions": "",
"source_page": 95,
"source": "datasheet"
},
{
"name": "ADCCLK(源自 PERx.SYSCLK)",
"symbol": "ADCCLK",
"kind": "electrical",
"unit": "MHz",
"min": 5,
"typ": null,
"max": 50,
"conditions": "",
"source_page": 123,
"source": "datasheet"
},
{
"name": "有效输出电压范围 VOUT (RL=5kΩ)",
"symbol": "VOUT",
"kind": "electrical",
"unit": "V",
"min": 0.3,
"typ": null,
"max": null,
"conditions": "RL = 5kΩ",
"source_page": 136,
"source": "datasheet"
},
{
"name": "有效输出电压范围 VOUT (RL=1kΩ)",
"symbol": "VOUT",
"kind": "electrical",
"unit": "V",
"min": 0.6,
"typ": null,
"max": null,
"conditions": "RL = 1kΩ",
"source_page": 136,
"source": "datasheet"
},
{
"name": "负载调整率",
"symbol": "",
"kind": "electrical",
"unit": "mV/V",
"min": -1,
"typ": null,
"max": 1,
"conditions": "",
"source_page": 136,
"source": "datasheet"
},
{
"name": "偏移量误差",
"symbol": "",
"kind": "electrical",
"unit": "mV",
"min": -10,
"typ": null,
"max": 10,
"conditions": "中点",
"source_page": 136,
"source": "datasheet"
},
{
"name": "增益误差",
"symbol": "",
"kind": "electrical",
"unit": "FSR 百分比",
"min": -2.5,
"typ": null,
"max": 2.5,
"conditions": "",
"source_page": 136,
"source": "datasheet"
},
{
"name": "比较器输入 (CMPINxx) 范围",
"symbol": "",
"kind": "electrical",
"unit": "V",
"min": 0,
"typ": null,
"max": null,
"conditions": "",
"source_page": 143,
"source": "datasheet"
},
{
"name": "以输入为基准的偏移量误差",
"symbol": "",
"kind": "electrical",
"unit": "mV",
"min": -20,
"typ": null,
"max": 20,
"conditions": "低共模,反相输入设置为 50mV",
"source_page": 143,
"source": "datasheet"
},
{
"name": "CMPSS DAC 静态偏移量误差",
"symbol": "",
"kind": "electrical",
"unit": "mV",
"min": -25,
"typ": null,
"max": 25,
"conditions": "",
"source_page": 144,
"source": "datasheet"
},
{
"name": "CMPSS DAC 静态增益误差",
"symbol": "",
"kind": "electrical",
"unit": "FSR 百分比",
"min": -2,
"typ": null,
"max": 2,
"conditions": "",
"source_page": 144,
"source": "datasheet"
},
{
"name": "CMPSS DAC 静态 INL",
"symbol": "INL",
"kind": "electrical",
"unit": "LSB",
"min": -16,
"typ": null,
"max": 16,
"conditions": "已更正端点",
"source_page": 144,
"source": "datasheet"
},
{
"name": "CMPSS DAC 输出干扰",
"symbol": "",
"kind": "electrical",
"unit": "LSB",
"min": -100,
"typ": null,
"max": 100,
"conditions": "由同一 CMPSS 模块内的比较器跳闸或 CMPSS DAC 代码更改引起的误差",
"source_page": 144,
"source": "datasheet"
},
{
"name": "VDAC 负载",
"symbol": "",
"kind": "electrical",
"unit": "kΩ",
"min": 6,
"typ": 8,
"max": 10,
"conditions": "当 VDAC 为基准时",
"source_page": 144,
"source": "datasheet"
},
{
"name": "VBOR-GB VDDIO BOR 保护频带",
"symbol": "VBOR-GB",
"kind": "recommended_operating",
"unit": "V",
"min": null,
"typ": 0.1,
"max": null,
"conditions": "",
"source_page": 59,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"f280049cpms"
],
"discovery_pitch": "F280049CPMS (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"f280049cpms.kicad_sym",
"f280049cpms.kicad_mod",
"f280049cpms.glb",
"f280049cpms.step",
"f280049cpms.lbr",
"docs/hero.png",
"docs/f280049cpms-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"f280049cpms-hero.glb",
"f280049cpms-hero.overlay.json",
"f280049cpms-etched.glb"
],
"visibility": {
"public": true
}
}