component
F280048PMQR
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Set visibility: public
fee3c77
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082
{
"schema_version": 1,
"type": "component",
"slug": "f280048pmqr",
"title": "F280048PMQR",
"brief": "Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"embedded processors & controllers",
"f280048pmqr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "F280048PMQR",
"manufacturer": "Texas Instruments",
"package": "LQFP-64(10x10)",
"pin_count": 64,
"category": "Embedded Processors & Controllers",
"subcategory": "Microcontrollers (MCU/MPU/SOC)",
"datasheet": "https://www.ti.com/cn/lit/gpn/tms320f280045",
"parts": {
"symbol": "f280048pmqr.kicad_sym",
"footprint": "f280048pmqr.kicad_mod",
"model_3d": "f280048pmqr-hero.glb",
"model_3d_plain": "f280048pmqr-etched.glb",
"model_3d_step": "f280048pmqr-etched.step",
"model_3d_step_plain": "f280048pmqr.step",
"lbr": "f280048pmqr.lbr"
},
"distributor_links": {
"lcsc": "C1848073",
"digikey": "296-F280048PMQRTR-ND",
"mouser": "595-F280048PMQR"
},
"distributor_check": {
"checked_at": "2026-11-05T22:10:56Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-F280048PMQRTR-ND",
"status": "found"
},
"mouser": {
"pn": "595-F280048PMQR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GPIO29",
"type": "bidirectional",
"description": "General-purpose I/O 29 with multiplexed SCI-A TX, ePWM7_B, LIN-A RX, SPI-B STE and ERRORSTS functions."
},
{
"number": "2",
"name": "GPIO28",
"type": "bidirectional",
"description": "General-purpose I/O 28 with multiplexed SCI-A RX, ePWM7_A, LIN-A TX, SPI-B CLK and ERRORSTS functions."
},
{
"number": "3",
"name": "XRSn",
"type": "bidirectional",
"description": "Device reset input and watchdog reset output, open-drain with internal pull-up; connect a 2.2 kΩ to 10 kΩ resistor to VDDIO."
},
{
"number": "4",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply pin; place a decoupling capacitor of about 20 µF total near the VDD pins."
},
{
"number": "5",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin, must be connected to the board ground."
},
{
"number": "6",
"name": "A6/PGA5_OF",
"type": "passive",
"description": "ADC-A analog input 6, also PGA-5 output filter pin."
},
{
"number": "7",
"name": "B2/C6/PGA3_OF",
"type": "passive",
"description": "ADC-B analog input 2 and ADC-C input 6, also PGA-3 output filter pin."
},
{
"number": "8",
"name": "B3/VDAC",
"type": "passive",
"description": "ADC-B analog input 3 and optional external reference for the on-chip DAC, with a fixed 100 pF capacitor to VSSA."
},
{
"number": "9",
"name": "A2/B6/PGA1_OF",
"type": "passive",
"description": "ADC-A analog input 2, ADC-B input 6, and PGA-1 output filter pin."
},
{
"number": "10",
"name": "PGA1_GND,PGA3_GND,PGA5_GND",
"type": "power_in",
"description": "PGA ground Kelvin reference pins for PGA-1, PGA-3 and PGA-5, tied to VSSA."
},
{
"number": "11",
"name": "C4/PGA5_IN",
"type": "passive",
"description": "ADC-C analog input 4 and PGA-5 input."
},
{
"number": "12",
"name": "C0/PGA1_IN",
"type": "passive",
"description": "ADC-C analog input 0 and PGA-1 input."
},
{
"number": "13",
"name": "C2/PGA3_IN",
"type": "passive",
"description": "ADC-C analog input 2 and PGA-3 input."
},
{
"number": "14",
"name": "A1/DACB_OUT",
"type": "passive",
"description": "ADC-A analog input 1 and buffered DAC-B output."
},
{
"number": "15",
"name": "A0/B15/C15/DACA_OUT",
"type": "passive",
"description": "ADC-A analog input 0, ADC-B input 15, ADC-C input 15, and buffered DAC-A output."
},
{
"number": "16",
"name": "VREFHIA,VREFHIB,VREFHIC",
"type": "bidirectional",
"description": "ADC high reference voltage; externally driven in external reference mode, device-driven in internal mode, with at least 2.2 µF to the matching VREFLO pin."
},
{
"number": "17",
"name": "VREFLOA,VREFLOB,VREFLOC",
"type": "input",
"description": "ADC low reference voltage, connected to VSSA."
},
{
"number": "18",
"name": "C1/PGA2_IN",
"type": "passive",
"description": "ADC-C analog input 1 and PGA-2 input."
},
{
"number": "19",
"name": "C3/PGA4_IN",
"type": "passive",
"description": "ADC-C analog input 3 and PGA-4 input."
},
{
"number": "20",
"name": "PGA2_GND,PGA4_GND,PGA6_GND",
"type": "power_in",
"description": "PGA ground Kelvin reference pins for PGA-2, PGA-4 and PGA-6, tied to VSSA."
},
{
"number": "21",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground pin."
},
{
"number": "22",
"name": "VDDA",
"type": "power_in",
"description": "3.3 V analog supply pin; place a decoupling capacitor of at least 2.2 µF to VSSA."
},
{
"number": "23",
"name": "A4/B8/PGA2_OF",
"type": "passive",
"description": "ADC-A analog input 4, ADC-B input 8, and PGA-2 output filter pin."
},
{
"number": "24",
"name": "B4/C8/PGA4_OF",
"type": "passive",
"description": "ADC-B analog input 4, ADC-C input 8, and PGA-4 output filter pin."
},
{
"number": "25",
"name": "A10/B1/C10/PGA7_OF",
"type": "passive",
"description": "ADC-A input 10, ADC-B input 1, ADC-C input 10, and PGA-7 output filter pin."
},
{
"number": "26",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin, must be connected to the board ground."
},
{
"number": "27",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply pin; requires decoupling capacitors on each VDD pin."
},
{
"number": "28",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply pin; place at least 0.1 µF decoupling capacitor on each VDDIO pin."
},
{
"number": "29",
"name": "FLT2",
"type": "unconnected",
"description": "Flash test pin 2 reserved by TI; must be left unconnected."
},
{
"number": "30",
"name": "FLT1",
"type": "unconnected",
"description": "Flash test pin 1 reserved by TI; must be left unconnected."
},
{
"number": "31",
"name": "GPIO11",
"type": "bidirectional",
"description": "General-purpose I/O 11 with multiplexed ePWM6_B, SCI-B RX, EQEP1_B, SPI-A STE and FSI RX functions."
},
{
"number": "32",
"name": "GPIO33",
"type": "bidirectional",
"description": "General-purpose I/O 33 with multiplexed I2C-A SCL, SPI-B STE, LIN-A RX, CAN-A RX and FSI RX clock functions."
},
{
"number": "33",
"name": "GPIO16",
"type": "bidirectional",
"description": "General-purpose I/O 16 with multiplexed SPI-A SIMO, CAN-B TX, ePWM5_A, SCI-A TX and XCLKOUT functions."
},
{
"number": "34",
"name": "GPIO17",
"type": "bidirectional",
"description": "General-purpose I/O 17 with multiplexed SPI-A SOMI, CAN-B RX, ePWM5_B, SCI-A RX and SDFM-1 clock functions."
},
{
"number": "35",
"name": "GPIO24",
"type": "bidirectional",
"description": "General-purpose I/O 24 with multiplexed OUTPUTXBAR1, EQEP2_A, ePWM8_A, SPI-B SIMO and ERRORSTS functions."
},
{
"number": "36",
"name": "TCK",
"type": "input",
"description": "JTAG test clock input with internal pull-up."
},
{
"number": "37",
"name": "GPIO37/TDO",
"type": "tri_state",
"description": "General-purpose I/O 37, default function JTAG TDO, tri-stated when JTAG is inactive; enable pull-up or external pull-up to avoid a floating input."
},
{
"number": "38",
"name": "TMS",
"type": "bidirectional",
"description": "JTAG test mode select input with internal pull-up; add an external 2.2 kΩ pull-up to VDDIO."
},
{
"number": "39",
"name": "GPIO35/TDI",
"type": "input",
"description": "General-purpose I/O 35, default function JTAG TDI input; enable internal pull-up or add an external pull-up to avoid a floating input."
},
{
"number": "40",
"name": "GPIO32",
"type": "bidirectional",
"description": "General-purpose I/O 32 with multiplexed I2C-A SDA, SPI-B CLK, ePWM8_B, LIN-A TX and CAN-A TX functions."
},
{
"number": "41",
"name": "GPIO18_X2",
"type": "bidirectional",
"description": "General-purpose I/O 18, also crystal oscillator output X2; usable as GPIO only when the system is clocked from INTOSC and X1 has an external pull-down of about 1 kΩ."
},
{
"number": "42",
"name": "X1",
"type": "input",
"description": "Crystal oscillator input or single-ended 3.3 V clock input; must be configured by software before enabling the crystal oscillator."
},
{
"number": "43",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply pin; place at least 0.1 µF decoupling capacitor on each VDDIO pin."
},
{
"number": "44",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply pin; requires decoupling capacitors on each VDD pin."
},
{
"number": "45",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin, must be connected to the board ground."
},
{
"number": "46",
"name": "VREGENZ",
"type": "input",
"description": "Internal regulator enable with internal pull-down; connect to VSS to enable the internal VREG, or to VDDIO to use an external VDD supply."
},
{
"number": "47",
"name": "GPIO8",
"type": "bidirectional",
"description": "General-purpose I/O 8 with multiplexed ePWM5_A, CAN-B TX, ADCSOCAO, SCI-A TX, SPI-A SIMO and I2C-A SCL functions."
},
{
"number": "48",
"name": "GPIO4",
"type": "bidirectional",
"description": "General-purpose I/O 4 with multiplexed ePWM3_A, OUTPUTXBAR3, CAN-A TX and FSI RX clock functions."
},
{
"number": "49",
"name": "GPIO3",
"type": "bidirectional",
"description": "General-purpose I/O 3 with multiplexed ePWM2_B, OUTPUTXBAR2, PMBus-A SCL, SPI-A CLK, SCI-A RX and FSI RX functions."
},
{
"number": "50",
"name": "GPIO2",
"type": "bidirectional",
"description": "General-purpose I/O 2 with multiplexed ePWM2_A, OUTPUTXBAR1, PMBus-A SDA, SCI-A TX and FSI RX functions."
},
{
"number": "51",
"name": "GPIO1",
"type": "bidirectional",
"description": "General-purpose I/O 1 with multiplexed ePWM1_B and I2C-A SCL functions."
},
{
"number": "52",
"name": "GPIO0",
"type": "bidirectional",
"description": "General-purpose I/O 0 with multiplexed ePWM1_A and I2C-A SDA functions."
},
{
"number": "53",
"name": "VDDIO_SW",
"type": "power_in",
"description": "3.3 V supply for the internal DC-DC regulator; requires a 20 µF bulk input capacitor and must be tied to VDDIO."
},
{
"number": "54",
"name": "GPIO23_VSW",
"type": "bidirectional",
"description": "General-purpose I/O 23, default DC-DC switch output VSW when the internal regulator is enabled; about 100 pF internal capacitance."
},
{
"number": "55",
"name": "VSS_SW",
"type": "power_in",
"description": "Internal DC-DC regulator ground; must be tied to VSS."
},
{
"number": "56",
"name": "GPIO22_VFBSW",
"type": "bidirectional",
"description": "General-purpose I/O 22, default DC-DC feedback VFBSW when the internal regulator is enabled; connect to the node where L(VSW) meets VDD."
},
{
"number": "57",
"name": "GPIO7",
"type": "bidirectional",
"description": "General-purpose I/O 7 with multiplexed ePWM4_B, OUTPUTXBAR5, EQEP1_B, CAN-B RX, SPI-B SIMO and FSI TX clock functions."
},
{
"number": "58",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin, must be connected to the board ground."
},
{
"number": "59",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply pin; requires decoupling capacitors on each VDD pin."
},
{
"number": "60",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply pin; place at least 0.1 µF decoupling capacitor on each VDDIO pin."
},
{
"number": "61",
"name": "GPIO5",
"type": "bidirectional",
"description": "General-purpose I/O 5 with multiplexed ePWM3_B, OUTPUTXBAR3, CAN-A RX, SPI-A STE and FSI TX functions."
},
{
"number": "62",
"name": "GPIO9",
"type": "bidirectional",
"description": "General-purpose I/O 9 with multiplexed ePWM5_B, SCI-B TX, OUTPUTXBAR6, EQEP1_INDEX, SCI-A RX and SPI-A CLK functions."
},
{
"number": "63",
"name": "GPIO10",
"type": "bidirectional",
"description": "General-purpose I/O 10 with multiplexed ePWM6_A, CAN-B RX, ADCSOCBO, EQEP1_A, SCI-B TX, SPI-A SOMI and I2C-A SDA functions."
},
{
"number": "64",
"name": "GPIO6",
"type": "bidirectional",
"description": "General-purpose I/O 6 with multiplexed ePWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, CAN-B TX and SPI-B SOMI functions."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The MPN F280048PMQR is not listed verbatim in the excerpt. The PMQ suffix matches the 64-pin PM Low-; Pin 30 is FLT1 and pin 29 is FLT2 in the Q-temperature 64-pin figure, not GPIO12 and GPIO13 as on th; The Table 5-1 column for GPIO12 is ambiguous in the extracted text (51 30 27), so GPIO12 is treated "
],
"pages_sent": 146,
"cost_usd": 0.2462,
"at": "2026-11-05T22:10:42"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tms320f280045",
"pages": 277,
"sha256": "867e7bb5ada6819c",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 64,
"described": 64,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "f280048pmqr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12,
12,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "f280048pmqr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12,
12,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "380e90183aa0d02d9b3e4e05f32026489702920f2d80f11f2b087ac05b6bdf54",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "LQFP-64(10x10)",
"Category": "Embedded Processors & Controllers",
"Pins": "64"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "867e7bb5ada6819cc36164498b50cad22179a747503cd852568bdaf44a4640b7",
"rows": [
{
"name": "Supply voltage VDDIO referenced to VSS",
"symbol": "VDDIO",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Supply voltage VDDA referenced to VSSA",
"symbol": "VDDA",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Supply voltage VDD referenced to VSS",
"symbol": "VDD",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 1.5,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Voltage difference between VDDIO and VDDIO_SW pins",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 0.3,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Input voltage (3.3V)",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Output voltage",
"symbol": "VO",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Digital input clamp current per pin",
"symbol": "IIK",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "VIN < VSS or VIN > VDDIO",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Analog input clamp current per pin",
"symbol": "IIKANALOG",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "VIN < VSSA or VIN > VDDA",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Total input clamp current, all inputs",
"symbol": "IIKTOTAL",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "VIN < VSS/VSSA or VIN > VDDIO/VDDA",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Digital output current per pin",
"symbol": "IOUT",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Natural ventilation temperature",
"symbol": "TA",
"kind": "absolute_maximum",
"unit": "°C",
"min": -40,
"typ": null,
"max": 125,
"conditions": "Natural ventilation",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Operating junction temperature",
"symbol": "TJ",
"kind": "absolute_maximum",
"unit": "°C",
"min": -40,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Storage temperature",
"symbol": "Tstg",
"kind": "absolute_maximum",
"unit": "°C",
"min": -65,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Device supply voltage VDDIO and VDDA",
"symbol": "VDDIO, VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": null,
"typ": 3.3,
"max": 3.63,
"conditions": "Internal BOR enabled",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Device supply voltage VDDIO and VDDA",
"symbol": "VDDIO, VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": 2.8,
"typ": 3.3,
"max": 3.63,
"conditions": "Internal BOR disabled",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Device supply voltage VDD",
"symbol": "VDD",
"kind": "recommended_operating",
"unit": "V",
"min": 1.14,
"typ": 1.2,
"max": 1.32,
"conditions": "",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Natural ventilation temperature, Q version (AEC Q100 qualified)",
"symbol": "TA",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 125,
"conditions": "Q version (AEC Q100 qualified)",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Buffered DAC output voltage range",
"symbol": "VOUT",
"kind": "recommended_operating",
"unit": "V",
"min": 0.3,
"typ": null,
"max": null,
"conditions": "RL = 5kΩ",
"source_page": 136,
"source": "datasheet"
},
{
"name": "Buffered DAC output voltage range",
"symbol": "VOUT",
"kind": "recommended_operating",
"unit": "V",
"min": 0.6,
"typ": null,
"max": null,
"conditions": "RL = 1kΩ",
"source_page": 136,
"source": "datasheet"
},
{
"name": "Low-level output voltage VOL",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.4,
"conditions": "IOL=IOL MAX",
"source_page": 67,
"source": "datasheet"
},
{
"name": "Low-level output voltage VOL",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.2,
"conditions": "IOL = 100µA",
"source_page": 67,
"source": "datasheet"
},
{
"name": "High-level input voltage (3.3V)",
"symbol": "VIH",
"kind": "electrical",
"unit": "V",
"min": 2,
"typ": null,
"max": null,
"conditions": "(3.3V)",
"source_page": 67,
"source": "datasheet"
},
{
"name": "Low-level input voltage (3.3V)",
"symbol": "VIL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.8,
"conditions": "(3.3V)",
"source_page": 67,
"source": "datasheet"
},
{
"name": "Internal regulator output",
"symbol": "VVREG",
"kind": "electrical",
"unit": "V",
"min": 1.14,
"typ": 1.2,
"max": 1.32,
"conditions": "",
"source_page": 80,
"source": "datasheet"
},
{
"name": "Crystal load capacitance",
"symbol": "CL1, CL2",
"kind": "electrical",
"unit": "pF",
"min": 12,
"typ": null,
"max": 24,
"conditions": "",
"source_page": 93,
"source": "datasheet"
},
{
"name": "Crystal shunt capacitance",
"symbol": "C0",
"kind": "electrical",
"unit": "pF",
"min": null,
"typ": null,
"max": 7,
"conditions": "",
"source_page": 93,
"source": "datasheet"
},
{
"name": "INTOSC1 and INTOSC2 frequency",
"symbol": "fINTOSC",
"kind": "electrical",
"unit": "MHz",
"min": 9.7,
"typ": 10,
"max": 10.3,
"conditions": "",
"source_page": 94,
"source": "datasheet"
},
{
"name": "Internal oscillator frequency stability",
"symbol": "",
"kind": "tolerance",
"unit": "%",
"min": -3,
"typ": null,
"max": 3,
"conditions": "",
"source_page": 95,
"source": "datasheet"
},
{
"name": "ADC clock frequency ADCCLK",
"symbol": "ADCCLK",
"kind": "electrical",
"unit": "MHz",
"min": 5,
"typ": null,
"max": 50,
"conditions": "",
"source_page": 123,
"source": "datasheet"
},
{
"name": "ADC offset error",
"symbol": "",
"kind": "electrical",
"unit": "LSB",
"min": -5,
"typ": 2,
"max": 5,
"conditions": "",
"source_page": 124,
"source": "datasheet"
},
{
"name": "ADC gain error, external reference",
"symbol": "",
"kind": "electrical",
"unit": "LSB",
"min": -5,
"typ": 3,
"max": 5,
"conditions": "External reference",
"source_page": 124,
"source": "datasheet"
},
{
"name": "ADC integral nonlinearity INL",
"symbol": "INL",
"kind": "electrical",
"unit": "LSB",
"min": -2,
"typ": 1,
"max": 2,
"conditions": "",
"source_page": 124,
"source": "datasheet"
},
{
"name": "ADC differential nonlinearity DNL",
"symbol": "DNL",
"kind": "electrical",
"unit": "LSB",
"min": -1,
"typ": 0.5,
"max": 1,
"conditions": "",
"source_page": 124,
"source": "datasheet"
},
{
"name": "Buffered DAC load regulation",
"symbol": "",
"kind": "electrical",
"unit": "mV/V",
"min": -1,
"typ": null,
"max": 1,
"conditions": "",
"source_page": 136,
"source": "datasheet"
},
{
"name": "Buffered DAC offset error",
"symbol": "",
"kind": "electrical",
"unit": "mV",
"min": -10,
"typ": null,
"max": 10,
"conditions": "Midpoint",
"source_page": 136,
"source": "datasheet"
},
{
"name": "Buffered DAC gain error",
"symbol": "",
"kind": "electrical",
"unit": "FSR 百分比",
"min": -2.5,
"typ": null,
"max": 2.5,
"conditions": "",
"source_page": 136,
"source": "datasheet"
},
{
"name": "Buffered DAC differential nonlinearity DNL",
"symbol": "DNL",
"kind": "electrical",
"unit": "LSB",
"min": -1,
"typ": 0.4,
"max": 1,
"conditions": "Corrected endpoints",
"source_page": 136,
"source": "datasheet"
},
{
"name": "Buffered DAC integral nonlinearity INL",
"symbol": "INL",
"kind": "electrical",
"unit": "LSB",
"min": -5,
"typ": 2,
"max": 5,
"conditions": "Corrected endpoints",
"source_page": 136,
"source": "datasheet"
},
{
"name": "PMBus low-level input voltage VIL",
"symbol": "VIL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.8,
"conditions": "",
"source_page": 176,
"source": "datasheet"
},
{
"name": "PMBus high-level input voltage VIH",
"symbol": "VIH",
"kind": "electrical",
"unit": "V",
"min": 2.1,
"typ": null,
"max": null,
"conditions": "",
"source_page": 176,
"source": "datasheet"
},
{
"name": "PMBus low-level output voltage VOL",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.4,
"conditions": "Ipullup = 4mA",
"source_page": 176,
"source": "datasheet"
},
{
"name": "PMBus SCL clock frequency, fast mode",
"symbol": "fSCL",
"kind": "electrical",
"unit": "kHz",
"min": 10,
"typ": null,
"max": 400,
"conditions": "Fast mode",
"source_page": 176,
"source": "datasheet"
},
{
"name": "PMBus SCL clock frequency, standard mode",
"symbol": "fSCL",
"kind": "electrical",
"unit": "kHz",
"min": 10,
"typ": null,
"max": 100,
"conditions": "Standard mode",
"source_page": 177,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"f280048pmqr"
],
"discovery_pitch": "F280048PMQR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"f280048pmqr.kicad_sym",
"f280048pmqr.kicad_mod",
"f280048pmqr.glb",
"f280048pmqr.step",
"f280048pmqr.lbr",
"docs/hero.png",
"docs/f280048pmqr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"f280048pmqr-hero.glb",
"f280048pmqr-hero.overlay.json",
"f280048pmqr-etched.glb"
],
"visibility": {
"public": true
}
}