main
History Download
Ray Publish 0.1.0 ff2caa8

F280048PMQR

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

F280048PMQR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GPIO29 bidirectional General-purpose I/O 29 with multiplexed SCI-A TX, ePWM7_B, LIN-A RX, SPI-B STE and ERRORSTS functions.
2 GPIO28 bidirectional General-purpose I/O 28 with multiplexed SCI-A RX, ePWM7_A, LIN-A TX, SPI-B CLK and ERRORSTS functions.
3 XRSn bidirectional Device reset input and watchdog reset output, open-drain with internal pull-up; connect a 2.2 kΩ to 10 kΩ resistor to VDDIO.
4 VDD power_in 1.2 V digital logic supply pin; place a decoupling capacitor of about 20 µF total near the VDD pins.
5 VSS power_in Digital ground pin, must be connected to the board ground.
6 A6/PGA5_OF passive ADC-A analog input 6, also PGA-5 output filter pin.
7 B2/C6/PGA3_OF passive ADC-B analog input 2 and ADC-C input 6, also PGA-3 output filter pin.
8 B3/VDAC passive ADC-B analog input 3 and optional external reference for the on-chip DAC, with a fixed 100 pF capacitor to VSSA.
9 A2/B6/PGA1_OF passive ADC-A analog input 2, ADC-B input 6, and PGA-1 output filter pin.
10 PGA1_GND,PGA3_GND,PGA5_GND power_in PGA ground Kelvin reference pins for PGA-1, PGA-3 and PGA-5, tied to VSSA.
11 C4/PGA5_IN passive ADC-C analog input 4 and PGA-5 input.
12 C0/PGA1_IN passive ADC-C analog input 0 and PGA-1 input.
13 C2/PGA3_IN passive ADC-C analog input 2 and PGA-3 input.
14 A1/DACB_OUT passive ADC-A analog input 1 and buffered DAC-B output.
15 A0/B15/C15/DACA_OUT passive ADC-A analog input 0, ADC-B input 15, ADC-C input 15, and buffered DAC-A output.
16 VREFHIA,VREFHIB,VREFHIC bidirectional ADC high reference voltage; externally driven in external reference mode, device-driven in internal mode, with at least 2.2 µF to the matching VREFLO pin.
17 VREFLOA,VREFLOB,VREFLOC input ADC low reference voltage, connected to VSSA.
18 C1/PGA2_IN passive ADC-C analog input 1 and PGA-2 input.
19 C3/PGA4_IN passive ADC-C analog input 3 and PGA-4 input.
20 PGA2_GND,PGA4_GND,PGA6_GND power_in PGA ground Kelvin reference pins for PGA-2, PGA-4 and PGA-6, tied to VSSA.
21 VSSA power_in Analog ground pin.
22 VDDA power_in 3.3 V analog supply pin; place a decoupling capacitor of at least 2.2 µF to VSSA.
23 A4/B8/PGA2_OF passive ADC-A analog input 4, ADC-B input 8, and PGA-2 output filter pin.
24 B4/C8/PGA4_OF passive ADC-B analog input 4, ADC-C input 8, and PGA-4 output filter pin.
25 A10/B1/C10/PGA7_OF passive ADC-A input 10, ADC-B input 1, ADC-C input 10, and PGA-7 output filter pin.
26 VSS power_in Digital ground pin, must be connected to the board ground.
27 VDD power_in 1.2 V digital logic supply pin; requires decoupling capacitors on each VDD pin.
28 VDDIO power_in 3.3 V digital I/O supply pin; place at least 0.1 µF decoupling capacitor on each VDDIO pin.
29 FLT2 unconnected Flash test pin 2 reserved by TI; must be left unconnected.
30 FLT1 unconnected Flash test pin 1 reserved by TI; must be left unconnected.
31 GPIO11 bidirectional General-purpose I/O 11 with multiplexed ePWM6_B, SCI-B RX, EQEP1_B, SPI-A STE and FSI RX functions.
32 GPIO33 bidirectional General-purpose I/O 33 with multiplexed I2C-A SCL, SPI-B STE, LIN-A RX, CAN-A RX and FSI RX clock functions.
33 GPIO16 bidirectional General-purpose I/O 16 with multiplexed SPI-A SIMO, CAN-B TX, ePWM5_A, SCI-A TX and XCLKOUT functions.
34 GPIO17 bidirectional General-purpose I/O 17 with multiplexed SPI-A SOMI, CAN-B RX, ePWM5_B, SCI-A RX and SDFM-1 clock functions.
35 GPIO24 bidirectional General-purpose I/O 24 with multiplexed OUTPUTXBAR1, EQEP2_A, ePWM8_A, SPI-B SIMO and ERRORSTS functions.
36 TCK input JTAG test clock input with internal pull-up.
37 GPIO37/TDO tri_state General-purpose I/O 37, default function JTAG TDO, tri-stated when JTAG is inactive; enable pull-up or external pull-up to avoid a floating input.
38 TMS bidirectional JTAG test mode select input with internal pull-up; add an external 2.2 kΩ pull-up to VDDIO.
39 GPIO35/TDI input General-purpose I/O 35, default function JTAG TDI input; enable internal pull-up or add an external pull-up to avoid a floating input.
40 GPIO32 bidirectional General-purpose I/O 32 with multiplexed I2C-A SDA, SPI-B CLK, ePWM8_B, LIN-A TX and CAN-A TX functions.
41 GPIO18_X2 bidirectional General-purpose I/O 18, also crystal oscillator output X2; usable as GPIO only when the system is clocked from INTOSC and X1 has an external pull-down of about 1 kΩ.
42 X1 input Crystal oscillator input or single-ended 3.3 V clock input; must be configured by software before enabling the crystal oscillator.
43 VDDIO power_in 3.3 V digital I/O supply pin; place at least 0.1 µF decoupling capacitor on each VDDIO pin.
44 VDD power_in 1.2 V digital logic supply pin; requires decoupling capacitors on each VDD pin.
45 VSS power_in Digital ground pin, must be connected to the board ground.
46 VREGENZ input Internal regulator enable with internal pull-down; connect to VSS to enable the internal VREG, or to VDDIO to use an external VDD supply.
47 GPIO8 bidirectional General-purpose I/O 8 with multiplexed ePWM5_A, CAN-B TX, ADCSOCAO, SCI-A TX, SPI-A SIMO and I2C-A SCL functions.
48 GPIO4 bidirectional General-purpose I/O 4 with multiplexed ePWM3_A, OUTPUTXBAR3, CAN-A TX and FSI RX clock functions.
49 GPIO3 bidirectional General-purpose I/O 3 with multiplexed ePWM2_B, OUTPUTXBAR2, PMBus-A SCL, SPI-A CLK, SCI-A RX and FSI RX functions.
50 GPIO2 bidirectional General-purpose I/O 2 with multiplexed ePWM2_A, OUTPUTXBAR1, PMBus-A SDA, SCI-A TX and FSI RX functions.
51 GPIO1 bidirectional General-purpose I/O 1 with multiplexed ePWM1_B and I2C-A SCL functions.
52 GPIO0 bidirectional General-purpose I/O 0 with multiplexed ePWM1_A and I2C-A SDA functions.
53 VDDIO_SW power_in 3.3 V supply for the internal DC-DC regulator; requires a 20 µF bulk input capacitor and must be tied to VDDIO.
54 GPIO23_VSW bidirectional General-purpose I/O 23, default DC-DC switch output VSW when the internal regulator is enabled; about 100 pF internal capacitance.
55 VSS_SW power_in Internal DC-DC regulator ground; must be tied to VSS.
56 GPIO22_VFBSW bidirectional General-purpose I/O 22, default DC-DC feedback VFBSW when the internal regulator is enabled; connect to the node where L(VSW) meets VDD.
57 GPIO7 bidirectional General-purpose I/O 7 with multiplexed ePWM4_B, OUTPUTXBAR5, EQEP1_B, CAN-B RX, SPI-B SIMO and FSI TX clock functions.
58 VSS power_in Digital ground pin, must be connected to the board ground.
59 VDD power_in 1.2 V digital logic supply pin; requires decoupling capacitors on each VDD pin.
60 VDDIO power_in 3.3 V digital I/O supply pin; place at least 0.1 µF decoupling capacitor on each VDDIO pin.
61 GPIO5 bidirectional General-purpose I/O 5 with multiplexed ePWM3_B, OUTPUTXBAR3, CAN-A RX, SPI-A STE and FSI TX functions.
62 GPIO9 bidirectional General-purpose I/O 9 with multiplexed ePWM5_B, SCI-B TX, OUTPUTXBAR6, EQEP1_INDEX, SCI-A RX and SPI-A CLK functions.
63 GPIO10 bidirectional General-purpose I/O 10 with multiplexed ePWM6_A, CAN-B RX, ADCSOCBO, EQEP1_A, SCI-B TX, SPI-A SOMI and I2C-A SDA functions.
64 GPIO6 bidirectional General-purpose I/O 6 with multiplexed ePWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, CAN-B TX and SPI-B SOMI functions.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDDIO referenced to VSS VDDIO -0.3 4.6 V 58
Supply voltage VDDA referenced to VSSA VDDA -0.3 4.6 V 58
Supply voltage VDD referenced to VSS VDD -0.3 1.5 V 58
Voltage difference between VDDIO and VDDIO_SW pins -0.3 0.3 V 58
Input voltage (3.3V) VIN -0.3 4.6 V 58
Output voltage VO -0.3 4.6 V 58
Digital input clamp current per pin IIK -20 20 mA VIN < VSS or VIN > VDDIO 58
Analog input clamp current per pin IIKANALOG -20 20 mA VIN < VSSA or VIN > VDDA 58
Total input clamp current, all inputs IIKTOTAL -20 20 mA VIN < VSS/VSSA or VIN > VDDIO/VDDA 58
Digital output current per pin IOUT -20 20 mA 58
Natural ventilation temperature TA -40 125 °C Natural ventilation 58
Operating junction temperature TJ -40 150 °C 58
Storage temperature Tstg -65 150 °C 58
Device supply voltage VDDIO and VDDA VDDIO, VDDA 3.3 3.63 V Internal BOR enabled 59
Device supply voltage VDDIO and VDDA VDDIO, VDDA 2.8 3.3 3.63 V Internal BOR disabled 59
Device supply voltage VDD VDD 1.14 1.2 1.32 V 59
Natural ventilation temperature, Q version (AEC Q100 qualified) TA -40 125 °C Q version (AEC Q100 qualified) 59
Buffered DAC output voltage range VOUT 0.3 V RL = 5kΩ 136
Buffered DAC output voltage range VOUT 0.6 V RL = 1kΩ 136
Low-level output voltage VOL VOL 0.4 V IOL=IOL MAX 67
Low-level output voltage VOL VOL 0.2 V IOL = 100µA 67
High-level input voltage (3.3V) VIH 2 V (3.3V) 67
Low-level input voltage (3.3V) VIL 0.8 V (3.3V) 67
Internal regulator output VVREG 1.14 1.2 1.32 V 80
Crystal load capacitance CL1, CL2 12 24 pF 93
Crystal shunt capacitance C0 7 pF 93
INTOSC1 and INTOSC2 frequency fINTOSC 9.7 10 10.3 MHz 94
Internal oscillator frequency stability -3 3 % 95
ADC clock frequency ADCCLK ADCCLK 5 50 MHz 123
ADC offset error -5 2 5 LSB 124
ADC gain error, external reference -5 3 5 LSB External reference 124
ADC integral nonlinearity INL INL -2 1 2 LSB 124
ADC differential nonlinearity DNL DNL -1 0.5 1 LSB 124
Buffered DAC load regulation -1 1 mV/V 136
Buffered DAC offset error -10 10 mV Midpoint 136
Buffered DAC gain error -2.5 2.5 FSR 百分比 136
Buffered DAC differential nonlinearity DNL DNL -1 0.4 1 LSB Corrected endpoints 136
Buffered DAC integral nonlinearity INL INL -5 2 5 LSB Corrected endpoints 136
PMBus low-level input voltage VIL VIL 0.8 V 176
PMBus high-level input voltage VIH VIH 2.1 V 176
PMBus low-level output voltage VOL VOL 0.4 V Ipullup = 4mA 176
PMBus SCL clock frequency, fast mode fSCL 10 400 kHz Fast mode 176
PMBus SCL clock frequency, standard mode fSCL 10 100 kHz Standard mode 177

CAD (KiCad official)

  • Symbol: F280048PMQR
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: f280048pmqr-etched.step / f280048pmqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); f280048pmqr.step / f280048pmqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (277 pp, sha256 867e7bb5ada6819c, retrieved 2026-11-05, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF