main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers f280045pmsr: viewers rendered from the public page · Ray
f280045pmsr-etched.glb Publish 0.1.0 · Ray
f280045pmsr-etched.step f280045pmsr: factory component page (tier=mfr) · Ray
f280045pmsr-hero.glb f280045pmsr: hero GLB from the etched model (keeps the MPN mark) · Ray
f280045pmsr-hero.overlay.json Publish 0.1.0 · Ray
f280045pmsr.glb Publish 0.1.0 · Ray
f280045pmsr.kicad_mod Publish 0.1.0 · Ray
f280045pmsr.kicad_sym Publish 0.1.0 · Ray
f280045pmsr.lbr Publish 0.1.0 · Ray
f280045pmsr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 64 pins · Ray

F280045PMSR

Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)

F280045PMSR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GPIO29 bidirectional General-purpose I/O 29 with mux options SCIA_TX, EPWM7_B, OUTPUTXBAR6, EQEP1_B, SD1_C3, EQEP2_INDEX, LINA_RX, SPIB_STE and ERRORSTS.
2 GPIO28 bidirectional General-purpose I/O 28 with mux options SCIA_RX, EPWM7_A, OUTPUTXBAR5, EQEP1_A, SD1_D3, EQEP2_STROBE, LINA_TX, SPIB_CLK and ERRORSTS.
3 XRSn bidirectional Device reset input and watchdog reset open-drain output with internal pull-up; use a 2.2kΩ to 10kΩ resistor to VDDIO and at most 100nF to VSS.
4 VDD power_in 1.2V digital logic supply; about 20µF total decoupling near the VDD pins is recommended.
5 VSS power_in Digital ground.
6 A6,PGA5_OF input ADC-A input 6 / PGA-5 output filter (optional) / CMPSS-5 inputs / AIO228 digital input.
7 B2,C6,PGA3_OF input ADC-B input 2, ADC-C input 6, PGA-3 output filter (optional), CMPSS-3 inputs and AIO226 digital input.
8 B3,VDAC input ADC-B input 3 or optional external reference for on-chip DAC; fixed 100pF to VSSA, add at least 1µF if used as DAC reference.
9 A2,B6,PGA1_OF input ADC-A input 2, ADC-B input 6, PGA-1 output filter (optional), CMPSS-1 inputs and AIO224 digital input.
10 PGA1_GND,PGA3_GND,PGA5_GND input Ground reference for PGA-1, PGA-3 and PGA-5; tie to VSSA if unused.
11 C4,PGA5_IN input ADC-C input 4 / PGA-5 input / CMPSS-5 inputs / AIO239 digital input.
12 C0,PGA1_IN input ADC-C input 0 / PGA-1 input / CMPSS-1 inputs / AIO237 digital input.
13 C2,PGA3_IN input ADC-C input 2 / PGA-3 input / CMPSS-3 inputs / AIO244 digital input.
14 A1,DACB_OUT bidirectional ADC-A input 1 or buffered DAC-B output; also AIO232 digital input.
15 A0,B15,C15,DACA_OUT bidirectional ADC-A input 0, ADC-B input 15, ADC-C input 15 or buffered DAC-A output; also AIO231 digital input.
16 VREFHIA,VREFHIB,VREFHIC bidirectional ADC-A/B/C high reference voltage, driven externally or by the device; place at least 2.2µF to the VREFLO pin and do not load externally.
17 VREFLOA,VREFLOB,VREFLOC input ADC-A/B/C low reference voltage; tie to VSSA if unused.
18 C1,PGA2_IN input ADC-C input 1 / PGA-2 input / CMPSS-2 inputs / AIO238 digital input.
19 C3,PGA4_IN input ADC-C input 3 / PGA-4 input / CMPSS-4 inputs / AIO245 digital input.
20 PGA2_GND,PGA4_GND,PGA6_GND input Ground reference for PGA-2, PGA-4 and PGA-6; tie to VSSA if unused.
21 VSSA power_in Analog ground.
22 VDDA power_in 3.3V analog supply; place at least 2.2µF to VSSA on each pin.
23 A4,B8,PGA2_OF input ADC-A input 4, ADC-B input 8, PGA-2 output filter (optional), CMPSS-2 inputs and AIO225 digital input.
24 B4,C8,PGA4_OF input ADC-B input 4, ADC-C input 8, PGA-4 output filter (optional), CMPSS-4 inputs and AIO227 digital input.
25 A10,B1,C10,PGA7_OF input ADC-A input 10, ADC-B input 1, ADC-C input 10, CMPSS-7 inputs and AIO230 digital input (no PGA function on 64-pin package).
26 VSS power_in Digital ground.
27 VDD power_in 1.2V digital logic supply.
28 VDDIO power_in 3.3V digital I/O supply; place at least 0.1µF decoupling on each pin.
29 GPIO13 bidirectional General-purpose I/O 13 with mux options EPWM7_B, CANB_RX, EQEP1_INDEX, SCIB_RX, PMBUSA_ALERT and FSIRXA_CLK.
30 GPIO12 bidirectional General-purpose I/O 12 with mux options EPWM7_A, CANB_TX, EQEP1_STROBE, SCIB_TX, PMBUSA_CTL and FSIRXA_D0.
31 GPIO11 bidirectional General-purpose I/O 11 with mux options EPWM6_B, SCIB_RX, OUTPUTXBAR7, EQEP1_B, SPIA_STE and FSIRXA_D1.
32 GPIO33 bidirectional General-purpose I/O 33 with mux options I2CA_SCL, SPIB_STE, OUTPUTXBAR4, LINA_RX, SD1_C3, FSIRXA_CLK and CANA_RX.
33 GPIO16 bidirectional General-purpose I/O 16 with mux options SPIA_SIMO, CANB_TX, OUTPUTXBAR7, EPWM5_A, SCIA_TX, SD1_D1, EQEP1_STROBE, PMBUSA_SCL and XCLKOUT.
34 GPIO17 bidirectional General-purpose I/O 17 with mux options SPIA_SOMI, CANB_RX, OUTPUTXBAR8, EPWM5_B, SCIA_RX, SD1_C1, EQEP1_INDEX and PMBUSA_SDA.
35 GPIO24 bidirectional General-purpose I/O 24 with mux options OUTPUTXBAR1, EQEP2_A, EPWM8_A, SPIB_SIMO, SD1_D1, PMBUSA_SCL, SCIA_TX and active-low ERRORSTS.
36 TCK input JTAG test clock with internal pull-up.
37 GPIO37/TDO bidirectional GPIO37 defaulting to JTAG TDO; tri-stated without JTAG activity, so enable internal pull-up or add external pull-up.
38 TMS bidirectional JTAG test mode select with internal pull-up; add an external pull-up (2.2kΩ recommended) to VDDIO; no TRSTn pin exists.
39 GPIO35/TDI bidirectional GPIO35 defaulting to JTAG TDI; enable internal pull-up or add external pull-up to avoid a floating input.
40 GPIO32 bidirectional General-purpose I/O 32 with mux options I2CA_SDA, SPIB_CLK, EPWM8_B, LINA_TX, SD1_D3, FSIRXA_D0 and CANA_TX.
41 GPIO18_X2 bidirectional GPIO18 or crystal oscillator output X2; GPIO use only when clocked by INTOSC with an external pull-down (1kΩ recommended) on X1.
42 X1 bidirectional Crystal oscillator or single-ended 3.3V clock input; tie to VSS if unused.
43 VDDIO power_in 3.3V digital I/O supply; place at least 0.1µF decoupling on each pin.
44 VDD power_in 1.2V digital logic supply.
45 VSS power_in Digital ground.
46 VREGENZ input Internal regulator enable with internal pull-down; tie to VSS to enable internal VREG or to VDDIO to use external 1.2V supply.
47 GPIO8 bidirectional General-purpose I/O 8 with mux options EPWM5_A, CANB_TX, ADCSOCAO, EQEP1_STROBE, SCIA_TX, SPIA_SIMO, I2CA_SCL and FSITXA_D1.
48 GPIO4 bidirectional General-purpose I/O 4 with mux options EPWM3_A, OUTPUTXBAR3, CANA_TX and FSIRXA_CLK.
49 GPIO3 bidirectional General-purpose I/O 3 with mux options EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL, SPIA_CLK, SCIA_RX and FSIRXA_D0.
50 GPIO2 bidirectional General-purpose I/O 2 with mux options EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA, SCIA_TX and FSIRXA_D1.
51 GPIO1 bidirectional General-purpose I/O 1 with mux options EPWM1_B and I2CA_SCL.
52 GPIO0 bidirectional General-purpose I/O 0 with mux options EPWM1_A and I2CA_SDA.
53 VDDIO_SW power_in 3.3V supply for internal DC-DC regulator with 20µF bulk input capacitor; must connect to VDDIO and share the same supply.
54 GPIO23_VSW bidirectional GPIO23 or internal DC-DC switching output VSW; about 100pF internal capacitance, so avoid for fast switching use.
55 VSS_SW power_in Internal DC-DC regulator ground; always connect to VSS.
56 GPIO22_VFBSW bidirectional GPIO22 or internal DC-DC feedback VFBSW; connect to the node where L(VSW) meets the VDD rail when DC-DC is used.
57 GPIO7 bidirectional General-purpose I/O 7 with mux options EPWM4_B, OUTPUTXBAR5, EQEP1_B, CANB_RX, SPIB_SIMO and FSITXA_CLK.
58 VSS power_in Digital ground.
59 VDD power_in 1.2V digital logic supply.
60 VDDIO power_in 3.3V digital I/O supply; place at least 0.1µF decoupling on each pin.
61 GPIO5 bidirectional General-purpose I/O 5 with mux options EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE and FSITXA_D1.
62 GPIO9 bidirectional General-purpose I/O 9 with mux options EPWM5_B, SCIB_TX, OUTPUTXBAR6, EQEP1_INDEX, SCIA_RX, SPIA_CLK and FSITXA_D0.
63 GPIO10 bidirectional General-purpose I/O 10 with mux options EPWM6_A, CANB_RX, ADCSOCBO, EQEP1_A, SCIB_TX, SPIA_SOMI, I2CA_SDA and FSITXA_CLK.
64 GPIO6 bidirectional General-purpose I/O 6 with mux options EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, CANB_TX, SPIB_SOMI and FSITXA_D0.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
I/O supply voltage (VDDIO) absolute maximum VDDIO -0.3 4.6 V referenced to VSS 59
Analog supply voltage (VDDA) absolute maximum VDDA -0.3 4.6 V referenced to VSSA 59
Core supply voltage (VDD) absolute maximum VDD -0.3 1.5 V referenced to VSS 59
Input voltage absolute maximum VIN -0.3 4.6 V (3.3V) 59
Output voltage absolute maximum VO -0.3 4.6 V 59
Digital input clamp current per pin IIK -20 20 mA VIN < VSS or VIN > VDDIO 59
Natural ventilation operating temperature TA -40 125 °C 59
Operating junction temperature TJ -40 150 °C 59
Storage temperature Tstg -65 150 °C 59
Device supply voltage VDDIO and VDDA with internal BOR disabled VDDIO, VDDA 2.8 3.3 3.63 V internal BOR disabled 60
Device supply voltage VDD VDD 1.14 1.2 1.32 V 60
Junction temperature, S version TJ -40 125 °C S version 60
High-level input voltage (3.3V) VIH 2 V (3.3V); maximum printed as VDDIO + 0.3 68
Low-level input voltage (3.3V) VIL 0.8 V (3.3V); minimum printed as VSS - 0.3 68
Input hysteresis VHYSTERESIS 150 mV 68
Low-level output voltage VOL 0.4 V IOL = IOL max 68
Low-level output voltage VOL 0.2 V IOL = 100µA 68
Pin leakage current ILEAK 2 µA all GPIO except GPIO23_VSW; pull-ups and outputs disabled; 0V ≤ VIN ≤ VDDIO 68
Input capacitance, digital GPIO CI 2 pF all digital GPIO except GPIO23_VSW 68
Internal regulator output voltage VVREG 1.14 1.2 1.32 V 81
Junction-to-case thermal resistance (PZ package) RΘJC 7.6 °C/W 69
Junction-to-board thermal resistance (PZ package) RΘJB 24.2 °C/W 69
Junction-to-ambient thermal resistance (high-K PCB) RΘJA 46.1 °C/W 0 lfm 69
Junction-to-package top thermal characterization PsiJT 0.2 °C/W 0 lfm 69
Junction-to-board thermal characterization PsiJB 23.8 °C/W 0 lfm 69

CAD (KiCad official)

  • Symbol: F280045PMSR
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: f280045pmsr-etched.step / f280045pmsr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); f280045pmsr.step / f280045pmsr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (270 pp, sha256 f0eccdafc7ec75fa, retrieved 2026-11-10, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF