component
F280041PZSR
Public Made by Adomby adom
Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
9a5b9c3
F280041PZSR
Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-100(14x14)
F280041PZSR from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO28 | bidirectional | General-purpose I/O 28, multiplexed with SCIA_RX, EPWM7_A, EQEP1_A, SD1_D3 and ERRORSTS. |
| 2 | XRSn | bidirectional | Open-drain device reset input and watchdog reset output, requiring a 2.2kΩ to 10kΩ pull-up resistor to VDDIO. |
| 3 | VDDIO | power_in | 3.3V digital I/O supply pin, requiring a minimum 0.1µF decoupling capacitor on each pin. |
| 4 | VDD | power_in | 1.2V digital logic supply pin, requiring decoupling capacitance near each VDD pin. |
| 5 | VSS | power_in | Digital ground pin that must be connected to the board ground. |
| 6 | A6/PGA5_OF | input | ADC-A input 6, also PGA-5 output filter pin and CMPSS-5 comparator input. |
| 7 | B2/C6/PGA3_OF | input | ADC-B input 2 (also ADC-C input 6 and PGA-3 output filter pin). |
| 8 | B3/VDAC | input | ADC-B input 3, or optional external reference for the on-chip DAC; a 100pF capacitor to VSSA is always present on this pin. |
| 9 | A2/B6/PGA1_OF | input | ADC-A input 2 (also ADC-B input 6 and PGA-1 output filter pin). |
| 10 | A3 | input | ADC-A input 3, also a CMPSS-1 comparator input. |
| 11 | VDDA | power_in | 3.3V analog supply pin, requiring a minimum 2.2µF decoupling capacitor to VSSA on each pin. |
| 12 | VSSA | power_in | Analog ground pin. |
| 13 | PGA5_GND | power_in | Kelvin ground reference for PGA-5 input. |
| 14 | PGA1_GND | power_in | Kelvin ground reference for PGA-1 input. |
| 15 | PGA3_GND | power_in | Kelvin ground reference for PGA-3 input. |
| 16 | PGA5_IN | input | PGA-5 amplifier input, also a CMPSS-5 comparator input. |
| 17 | C4 | input | ADC-C input 4, also CMPSS-5 comparator inputs. |
| 18 | PGA1_IN | input | PGA-1 amplifier input, also a CMPSS-1 comparator input. |
| 19 | C0 | input | ADC-C input 0, also CMPSS-1 comparator inputs. |
| 20 | PGA3_IN | input | PGA-3 amplifier input, also a CMPSS-3 comparator input. |
| 21 | C2 | input | ADC-C input 2, also CMPSS-3 comparator inputs. |
| 22 | A1/DACB_OUT | passive | ADC-A input 1, also the buffered DAC-B output. |
| 23 | A0/B15/C15/DACA_OUT | passive | ADC-A input 0 (also ADC-B input 15, ADC-C input 15) and the buffered DAC-A output. |
| 24 | VREFHIB,VREFHIC | bidirectional | ADC-B and ADC-C high reference; a minimum 2.2µF capacitor is required between each and its low reference. |
| 25 | VREFHIA | bidirectional | ADC-A high reference; driven externally in external reference mode and by the device in internal reference mode, with at least 2.2µF placed on it. |
| 26 | VREFLOB,VREFLOC | input | ADC-B and ADC-C low reference pins. |
| 27 | VREFLOA | input | ADC-A low reference pin. |
| 28 | C5/PGA6_IN | input | ADC-C input 5, also the PGA-6 input and CMPSS-6 comparator input. |
| 29 | C1 | input | ADC-C input 1, also CMPSS-2 comparator inputs. |
| 30 | PGA2_IN | input | PGA-2 amplifier input, also a CMPSS-2 comparator input. |
| 31 | C3/PGA4_IN | input | ADC-C input 3, also the PGA-4 input and CMPSS-4 comparator inputs. |
| 32 | PGA2_GND,PGA4_GND,PGA6_GND | power_in | Shared Kelvin ground reference for PGA-2, PGA-4 and PGA-6. |
| 33 | VSSA | power_in | Analog ground pin. |
| 34 | VDDA | power_in | 3.3V analog supply pin, requiring a minimum 2.2µF decoupling capacitor to VSSA. |
| 35 | A5 | input | ADC-A input 5, also CMPSS-2 comparator inputs. |
| 36 | A4/B8/PGA2_OF | input | ADC-A input 4 (also ADC-B input 8 and PGA-2 output filter pin). |
| 37 | A8/PGA6_OF | input | ADC-A input 8, also PGA-6 output filter pin. |
| 38 | A9 | input | ADC-A input 9, also CMPSS-6 comparator inputs. |
| 39 | B4/C8/PGA4_OF | input | ADC-B input 4 (also ADC-C input 8 and PGA-4 output filter pin). |
| 40 | A10/B1/C10/PGA7_OF | input | ADC-A input 10 (also ADC-B input 1, ADC-C input 10 and PGA-7 output filter pin). |
| 41 | B0 | input | ADC-B input 0, also CMPSS-7 comparator inputs. |
| 42 | PGA7_GND | power_in | Kelvin ground reference for PGA-7 input. |
| 43 | PGA7_IN | input | PGA-7 amplifier input, also a CMPSS-7 comparator input. |
| 44 | C14 | input | ADC-C input 14, also CMPSS-7 comparator inputs. |
| 45 | VSS | power_in | Digital ground pin that must be connected to the board ground. |
| 46 | VDD | power_in | 1.2V digital logic supply pin, requiring decoupling capacitance near each VDD pin. |
| 47 | VDDIO | power_in | 3.3V digital I/O supply pin, requiring a minimum 0.1µF decoupling capacitor. |
| 48 | FLT2 | bidirectional | Flash test pin 2, reserved for TI and must be left unconnected. |
| 49 | FLT1 | bidirectional | Flash test pin 1, reserved for TI and must be left unconnected. |
| 50 | GPIO13 | bidirectional | General-purpose I/O 13, multiplexed with EPWM7_B, CANB_RX, EQEP1_INDEX, SCIB_RX and PMBUSA_ALERT. |
| 51 | GPIO12 | bidirectional | General-purpose I/O 12, multiplexed with EPWM7_A, CANB_TX, EQEP1_STROBE, SCIB_TX and PMBUSA_CTL. |
| 52 | GPIO11 | bidirectional | General-purpose I/O 11, multiplexed with EPWM6_B, SCIB_RX, EQEP1_B, OUTPUTXBAR7 and SPIA_STE. |
| 53 | GPIO33 | bidirectional | General-purpose I/O 33, multiplexed with I2CA_SCL, SPIB_STE, LINA_RX and CANA_RX. |
| 54 | GPIO16 | bidirectional | General-purpose I/O 16, multiplexed with SPIA_SIMO, CANB_TX, EPWM5_A, SCIA_TX and XCLKOUT. |
| 55 | GPIO17 | bidirectional | General-purpose I/O 17, multiplexed with SPIA_SOMI, CANB_RX, EPWM5_B, SCIA_RX and PMBUSA_SDA. |
| 56 | GPIO24 | bidirectional | General-purpose I/O 24, multiplexed with OUTPUTXBAR1, EQEP2_A, EPWM8_A, SPIB_SIMO and ERRORSTS. |
| 57 | GPIO25 | bidirectional | General-purpose I/O 25, multiplexed with OUTPUTXBAR2, EQEP2_B, SPIB_SOMI, SD1_C1 and PMBUSA_SDA. |
| 58 | GPIO26 | bidirectional | General-purpose I/O 26, multiplexed with OUTPUTXBAR3, EQEP2_INDEX, SPIB_CLK, SD1_D2 and I2CA_SDA. |
| 59 | GPIO27 | bidirectional | General-purpose I/O 27, multiplexed with OUTPUTXBAR4, EQEP2_STROBE, SPIB_STE, SD1_C2 and I2CA_SCL. |
| 60 | TCK | input | JTAG test clock input with an internal pull-up resistor. |
| 61 | GPIO37/TDO | output | General-purpose I/O 37, default function JTAG test data output (TDO), which is tri-stated when JTAG is inactive. |
| 62 | TMS | bidirectional | JTAG test mode select with an internal pull-up; an external 2.2kΩ pull-up to VDDIO is recommended. |
| 63 | GPIO35/TDI | input | General-purpose I/O 35, default function JTAG test data input (TDI); enable an internal or external pull-up to avoid a floating input. |
| 64 | GPIO32 | bidirectional | General-purpose I/O 32, multiplexed with I2CA_SDA, SPIB_CLK, EPWM8_B, LINA_TX and CANA_TX. |
| 65 | GPIO56 | bidirectional | General-purpose I/O 56, multiplexed with SPIA_CLK, EQEP2_STROBE, SCIB_TX, SD1_D3 and SPIB_SIMO. |
| 66 | GPIO57 | bidirectional | General-purpose I/O 57, multiplexed with SPIA_STE, EQEP2_INDEX, SCIB_RX, SD1_C3 and SPIB_SOMI. |
| 67 | GPIO58 | bidirectional | General-purpose I/O 58, multiplexed with OUTPUTXBAR1, SPIB_CLK, SD1_D4, LINA_TX and CANB_TX. |
| 68 | GPIO18_X2 | bidirectional | General-purpose I/O 18, usable only when INTOSC clocks the system and X1 has an external pull-down (about 1kΩ); also crystal oscillator output X2. |
| 69 | X1 | bidirectional | Crystal oscillator input or single-ended 3.3V clock input, which must be configured by software before the oscillator is enabled. |
| 70 | VDDIO | power_in | 3.3V digital I/O supply pin, requiring a minimum 0.1µF decoupling capacitor. |
| 71 | VDD | power_in | 1.2V digital logic supply pin, requiring decoupling capacitance near each VDD pin. |
| 72 | VSS | power_in | Digital ground pin that must be connected to the board ground. |
| 73 | VREGENZ | input | Internal regulator enable with internal pull-down; tie to VSS to enable the internal VREG or to VDDIO to use an external supply. |
| 74 | GPIO8 | bidirectional | General-purpose I/O 8, multiplexed with EPWM5_A, CANB_TX, ADCSOCAO, EQEP1_STROBE and I2CA_SCL. |
| 75 | GPIO4 | bidirectional | General-purpose I/O 4, multiplexed with EPWM3_A, OUTPUTXBAR3, CANA_TX and FSIRXA_CLK. |
| 76 | GPIO3 | bidirectional | General-purpose I/O 3, multiplexed with EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL, SPIA_CLK and SCIA_RX. |
| 77 | GPIO2 | bidirectional | General-purpose I/O 2, multiplexed with EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA, SCIA_TX and FSIRXA_D1. |
| 78 | GPIO1 | bidirectional | General-purpose I/O 1, multiplexed with EPWM1_B and I2CA_SCL. |
| 79 | GPIO0 | bidirectional | General-purpose I/O 0, multiplexed with EPWM1_A and I2CA_SDA. |
| 80 | VDDIO_SW | power_in | 3.3V supply for the internal DC/DC regulator, which requires a 20µF bulk input capacitor and must be connected to VDDIO. |
| 81 | GPIO23_VSW | bidirectional | General-purpose I/O 23, which is the internal DC/DC switch output (VSW) when DCDCEN is set. |
| 82 | VSS_SW | power_in | Internal DC/DC regulator ground that must be connected to VSS. |
| 83 | GPIO22_VFBSW | bidirectional | General-purpose I/O 22, which is the DC/DC feedback (VFBSW) pin by default when the internal regulator is used. |
| 84 | GPIO7 | bidirectional | General-purpose I/O 7, multiplexed with EPWM4_B, OUTPUTXBAR5, EQEP1_B, CANB_RX and SPIB_SIMO. |
| 85 | GPIO40 | bidirectional | General-purpose I/O 40, multiplexed with PMBUSA_SDA, FSIRXA_D0, SCIB_TX and EQEP1_A. |
| 86 | VSS | power_in | Digital ground pin that must be connected to the board ground. |
| 87 | VDD | power_in | 1.2V digital logic supply pin, requiring decoupling capacitance near each VDD pin. |
| 88 | VDDIO | power_in | 3.3V digital I/O supply pin, requiring a minimum 0.1µF decoupling capacitor. |
| 89 | GPIO5 | bidirectional | General-purpose I/O 5, multiplexed with EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE and FSITXA_D1. |
| 90 | GPIO9 | bidirectional | General-purpose I/O 9, multiplexed with EPWM5_B, SCIB_TX, OUTPUTXBAR6, SCIA_RX and SPIA_CLK. |
| 91 | GPIO39 | bidirectional | General-purpose I/O 39, multiplexed with CANB_RX and FSIRXA_CLK. |
| 92 | GPIO59 | bidirectional | General-purpose I/O 59, multiplexed with OUTPUTXBAR2, SPIB_STE, SD1_C4, LINA_RX and CANB_RX. |
| 93 | GPIO10 | bidirectional | General-purpose I/O 10, multiplexed with EPWM6_A, CANB_RX, ADCSOCBO, EQEP1_A and I2CA_SDA. |
| 94 | GPIO34 | bidirectional | General-purpose I/O 34, multiplexed with OUTPUTXBAR1 and PMBUSA_SDA. |
| 95 | GPIO15 | bidirectional | General-purpose I/O 15, multiplexed with EPWM8_B, SCIB_RX, OUTPUTXBAR4, PMBUSA_SCL and SPIB_STE. |
| 96 | GPIO14 | bidirectional | General-purpose I/O 14, multiplexed with EPWM8_A, SCIB_TX, OUTPUTXBAR3, PMBUSA_SDA and SPIB_CLK. |
| 97 | GPIO6 | bidirectional | General-purpose I/O 6, multiplexed with EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, CANB_TX and SPIB_SOMI. |
| 98 | GPIO30 | bidirectional | General-purpose I/O 30, multiplexed with CANA_RX, SPIB_SIMO, OUTPUTXBAR7, EQEP1_STROBE and SD1_D4. |
| 99 | GPIO31 | bidirectional | General-purpose I/O 31, multiplexed with CANA_TX, SPIB_SOMI, OUTPUTXBAR8, EQEP1_INDEX, SD1_C4 and FSIRXA_D1. |
| 100 | GPIO29 | bidirectional | General-purpose I/O 29, multiplexed with SCIA_TX, EPWM7_B, OUTPUTXBAR6, EQEP1_B, SD1_C3, LINA_RX, SPIB_STE and ERRORSTS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-100(14x14) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDDIO supply voltage referenced to VSS | VDDIO | -0.3 | 4.6 | V | 以 VSS 为基准 | 59 | |
| VDDA supply voltage referenced to VSSA | VDDA | -0.3 | 4.6 | V | 以 VSSA 为基准 | 59 | |
| VDD supply voltage referenced to VSS | VDD | -0.3 | 1.5 | V | 以 VSS 为基准 | 59 | |
| Input voltage | VIN | -0.3 | 4.6 | V | (3.3V) | 59 | |
| Output voltage | VO | -0.3 | 4.6 | V | 59 | ||
| Digital input clamp current per pin | IIK | -20 | 20 | mA | VIN < VSS 或 VIN > VDDIO | 59 | |
| Analog input clamp current per pin | IIKANALOG | -20 | 20 | mA | VIN < VSSA 或 VIN > VDDA | 59 | |
| Digital output current per pin | IOUT | -20 | 20 | mA | 59 | ||
| Natural ventilation operating temperature | TA | -40 | 125 | °C | 自然通风 | 59 | |
| Operating junction temperature | TJ | -40 | 150 | °C | 59 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 59 | ||
| ESD human body model HBM | V(ESD) | -2000 | 2000 | V | HBM, JS-001, 100-pin PZ, S temperature range | 59 | |
| ESD charged device model all pins | V(ESD) | -500 | 500 | V | CDM, JESD22-C101, 100-pin PZ | 59 | |
| VDDIO and VDDA supply, internal BOR disabled | VDDIO/VDDA | 2.8 | 3.3 | 3.63 | V | 禁用内部 BOR | 60 |
| VDDIO and VDDA supply, internal BOR enabled | VDDIO/VDDA | 3.3 | 3.63 | V | 启用内部 BOR | 60 | |
| Device supply voltage VDD | VDD | 1.14 | 1.2 | 1.32 | V | 60 | |
| Junction temperature S version | TJ | -40 | 125 | °C | S 版本 | 60 | |
| Low-level output voltage | VOL | 0.4 | V | IOL=IOL 最大值 | 68 | ||
| Low-level output voltage | VOL | 0.2 | V | IOL = 100µA | 68 | ||
| High-level input voltage | VIH | 2 | V | (3.3V) | 68 | ||
| Low-level input voltage | VIL | 0.8 | V | (3.3V) | 68 | ||
| Input hysteresis | VHYSTERESIS | 150 | mV | 68 | |||
| Internal regulator output | VVREG | 1.14 | 1.2 | 1.32 | V | 81 | |
| Crystal load capacitance | CL1、CL2 | 12 | 24 | pF | 94 | ||
| Internal oscillator frequency INTOSC1 and INTOSC2 | fINTOSC | 9.7 | 10 | 10.3 | MHz | INTOSC1 和 INTOSC2 | 95 |
| INTOSC frequency stability over temperature and voltage | fINTOSC-STABILITY | -3 | 3 | % | 频率稳定性 | 96 | |
| INTOSC frequency stability at VDD, 30°C | fINTOSC-STABILITY | -0.2 | 0.2 | % | VDD 上的频率稳定性 30°C | 96 | |
| INTOSC frequency stability at room temperature, nominal VDD | fINTOSC-STABILITY | -0.1 | 0.1 | % | 室温下的频率稳定性 30°C,标称 VDD | 96 | |
| ADC clock frequency | ADCCLK | 5 | 50 | MHz | ADCCLK(源自 PERx.SYSCLK) | 124 | |
| ADC conversion range internal reference 3.3V range | VREFHI-VREFLO | 0 | 3.3 | V | 内部基准电压 = 3.3V 范围 | 124 | |
| ADC conversion range internal reference 2.5V range | VREFHI-VREFLO | 0 | 2.5 | V | 内部基准电压 = 2.5V 范围 | 124 | |
| ADC gain error internal reference | -45 | 45 | LSB | 内部基准电压 | 125 | ||
| ADC gain error external reference | -5 | 5 | LSB | 外部基准 | 125 | ||
| ADC offset error | -5 | 5 | LSB | 125 | |||
| ADC channel-to-channel gain error | -2 | 2 | LSB | 125 | |||
| ADC-to-ADC gain error | -4 | 4 | LSB | 所有 ADC 的 VREFHI 和 VREFLO 都相同 | 125 | ||
| ADC differential nonlinearity DNL | DNL | -1 | 1 | LSB | 125 | ||
| ADC integral nonlinearity INL | INL | -2 | 2 | LSB | 125 | ||
| Buffered DAC output voltage range, RL 5kΩ | VOUT | 0.3 | V | RL = 5kΩ | 137 | ||
| Buffered DAC output voltage range, RL 1kΩ | VOUT | 0.6 | V | RL = 1kΩ | 137 | ||
| Buffered DAC load regulation | -1 | 1 | mV/V | 137 | |||
| Buffered DAC offset error | -10 | 10 | mV | 中点 | 137 | ||
| Buffered DAC gain error | -2.5 | 2.5 | FSR % | 137 | |||
| Buffered DAC DNL | DNL | -1 | 1 | LSB | 已更正端点 | 137 | |
| Buffered DAC INL | INL | -5 | 5 | LSB | 已更正端点 | 137 | |
| Buffered DAC voltage output slew rate | 2.8 | 4.5 | V/µs | 从 0.3V 到 3V 转换的压摆率 | 137 | ||
| Buffered DAC reference input resistance | 160 | 200 | 240 | kΩ | VDAC 或 VREFHI | 137 | |
| Comparator input-referred offset | -20 | 20 | mV | 低共模,反相输入设置为 50mV | 144 | ||
| CMPSS DAC static offset error | -25 | 25 | mV | 145 | |||
| CMPSS DAC static gain error | -2 | 2 | FSR % | 145 | |||
| CMPSS DAC static DNL | DNL | -1 | 4 | LSB | 已更正端点 | 145 | |
| CMPSS DAC static INL | INL | -16 | 16 | LSB | 已更正端点 | 145 | |
| CMPSS DAC VDAC load | VDAC load | 6 | 8 | 10 | kΩ | 当 VDAC 为基准时 | 145 |
| Junction-to-ambient thermal resistance high-k PCB | RΘJA | 46.1 | °C/W | 0 lfm | 69 | ||
| Junction-to-case thermal resistance | RΘJC | 7.6 | °C/W | 69 |
CAD (KiCad official)
- Symbol:
F280041PZSR - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
f280041pzsr-etched.step/f280041pzsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);f280041pzsr.step/f280041pzsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (270 pp, sha256
f0eccdafc7ec75fa, retrieved 2026-11-02, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# F280041PZSR
**Texas Instruments** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-100(14x14)
F280041PZSR from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO28 | bidirectional | General-purpose I/O 28, multiplexed with SCIA_RX, EPWM7_A, EQEP1_A, SD1_D3 and ERRORSTS. |
| 2 | XRSn | bidirectional | Open-drain device reset input and watchdog reset output, requiring a 2.2kΩ to 10kΩ pull-up resistor to VDDIO. |
| 3 | VDDIO | power_in | 3.3V digital I/O supply pin, requiring a minimum 0.1µF decoupling capacitor on each pin. |
| 4 | VDD | power_in | 1.2V digital logic supply pin, requiring decoupling capacitance near each VDD pin. |
| 5 | VSS | power_in | Digital ground pin that must be connected to the board ground. |
| 6 | A6/PGA5_OF | input | ADC-A input 6, also PGA-5 output filter pin and CMPSS-5 comparator input. |
| 7 | B2/C6/PGA3_OF | input | ADC-B input 2 (also ADC-C input 6 and PGA-3 output filter pin). |
| 8 | B3/VDAC | input | ADC-B input 3, or optional external reference for the on-chip DAC; a 100pF capacitor to VSSA is always present on this pin. |
| 9 | A2/B6/PGA1_OF | input | ADC-A input 2 (also ADC-B input 6 and PGA-1 output filter pin). |
| 10 | A3 | input | ADC-A input 3, also a CMPSS-1 comparator input. |
| 11 | VDDA | power_in | 3.3V analog supply pin, requiring a minimum 2.2µF decoupling capacitor to VSSA on each pin. |
| 12 | VSSA | power_in | Analog ground pin. |
| 13 | PGA5_GND | power_in | Kelvin ground reference for PGA-5 input. |
| 14 | PGA1_GND | power_in | Kelvin ground reference for PGA-1 input. |
| 15 | PGA3_GND | power_in | Kelvin ground reference for PGA-3 input. |
| 16 | PGA5_IN | input | PGA-5 amplifier input, also a CMPSS-5 comparator input. |
| 17 | C4 | input | ADC-C input 4, also CMPSS-5 comparator inputs. |
| 18 | PGA1_IN | input | PGA-1 amplifier input, also a CMPSS-1 comparator input. |
| 19 | C0 | input | ADC-C input 0, also CMPSS-1 comparator inputs. |
| 20 | PGA3_IN | input | PGA-3 amplifier input, also a CMPSS-3 comparator input. |
| 21 | C2 | input | ADC-C input 2, also CMPSS-3 comparator inputs. |
| 22 | A1/DACB_OUT | passive | ADC-A input 1, also the buffered DAC-B output. |
| 23 | A0/B15/C15/DACA_OUT | passive | ADC-A input 0 (also ADC-B input 15, ADC-C input 15) and the buffered DAC-A output. |
| 24 | VREFHIB,VREFHIC | bidirectional | ADC-B and ADC-C high reference; a minimum 2.2µF capacitor is required between each and its low reference. |
| 25 | VREFHIA | bidirectional | ADC-A high reference; driven externally in external reference mode and by the device in internal reference mode, with at least 2.2µF placed on it. |
| 26 | VREFLOB,VREFLOC | input | ADC-B and ADC-C low reference pins. |
| 27 | VREFLOA | input | ADC-A low reference pin. |
| 28 | C5/PGA6_IN | input | ADC-C input 5, also the PGA-6 input and CMPSS-6 comparator input. |
| 29 | C1 | input | ADC-C input 1, also CMPSS-2 comparator inputs. |
| 30 | PGA2_IN | input | PGA-2 amplifier input, also a CMPSS-2 comparator input. |
| 31 | C3/PGA4_IN | input | ADC-C input 3, also the PGA-4 input and CMPSS-4 comparator inputs. |
| 32 | PGA2_GND,PGA4_GND,PGA6_GND | power_in | Shared Kelvin ground reference for PGA-2, PGA-4 and PGA-6. |
| 33 | VSSA | power_in | Analog ground pin. |
| 34 | VDDA | power_in | 3.3V analog supply pin, requiring a minimum 2.2µF decoupling capacitor to VSSA. |
| 35 | A5 | input | ADC-A input 5, also CMPSS-2 comparator inputs. |
| 36 | A4/B8/PGA2_OF | input | ADC-A input 4 (also ADC-B input 8 and PGA-2 output filter pin). |
| 37 | A8/PGA6_OF | input | ADC-A input 8, also PGA-6 output filter pin. |
| 38 | A9 | input | ADC-A input 9, also CMPSS-6 comparator inputs. |
| 39 | B4/C8/PGA4_OF | input | ADC-B input 4 (also ADC-C input 8 and PGA-4 output filter pin). |
| 40 | A10/B1/C10/PGA7_OF | input | ADC-A input 10 (also ADC-B input 1, ADC-C input 10 and PGA-7 output filter pin). |
| 41 | B0 | input | ADC-B input 0, also CMPSS-7 comparator inputs. |
| 42 | PGA7_GND | power_in | Kelvin ground reference for PGA-7 input. |
| 43 | PGA7_IN | input | PGA-7 amplifier input, also a CMPSS-7 comparator input. |
| 44 | C14 | input | ADC-C input 14, also CMPSS-7 comparator inputs. |
| 45 | VSS | power_in | Digital ground pin that must be connected to the board ground. |
| 46 | VDD | power_in | 1.2V digital logic supply pin, requiring decoupling capacitance near each VDD pin. |
| 47 | VDDIO | power_in | 3.3V digital I/O supply pin, requiring a minimum 0.1µF decoupling capacitor. |
| 48 | FLT2 | bidirectional | Flash test pin 2, reserved for TI and must be left unconnected. |
| 49 | FLT1 | bidirectional | Flash test pin 1, reserved for TI and must be left unconnected. |
| 50 | GPIO13 | bidirectional | General-purpose I/O 13, multiplexed with EPWM7_B, CANB_RX, EQEP1_INDEX, SCIB_RX and PMBUSA_ALERT. |
| 51 | GPIO12 | bidirectional | General-purpose I/O 12, multiplexed with EPWM7_A, CANB_TX, EQEP1_STROBE, SCIB_TX and PMBUSA_CTL. |
| 52 | GPIO11 | bidirectional | General-purpose I/O 11, multiplexed with EPWM6_B, SCIB_RX, EQEP1_B, OUTPUTXBAR7 and SPIA_STE. |
| 53 | GPIO33 | bidirectional | General-purpose I/O 33, multiplexed with I2CA_SCL, SPIB_STE, LINA_RX and CANA_RX. |
| 54 | GPIO16 | bidirectional | General-purpose I/O 16, multiplexed with SPIA_SIMO, CANB_TX, EPWM5_A, SCIA_TX and XCLKOUT. |
| 55 | GPIO17 | bidirectional | General-purpose I/O 17, multiplexed with SPIA_SOMI, CANB_RX, EPWM5_B, SCIA_RX and PMBUSA_SDA. |
| 56 | GPIO24 | bidirectional | General-purpose I/O 24, multiplexed with OUTPUTXBAR1, EQEP2_A, EPWM8_A, SPIB_SIMO and ERRORSTS. |
| 57 | GPIO25 | bidirectional | General-purpose I/O 25, multiplexed with OUTPUTXBAR2, EQEP2_B, SPIB_SOMI, SD1_C1 and PMBUSA_SDA. |
| 58 | GPIO26 | bidirectional | General-purpose I/O 26, multiplexed with OUTPUTXBAR3, EQEP2_INDEX, SPIB_CLK, SD1_D2 and I2CA_SDA. |
| 59 | GPIO27 | bidirectional | General-purpose I/O 27, multiplexed with OUTPUTXBAR4, EQEP2_STROBE, SPIB_STE, SD1_C2 and I2CA_SCL. |
| 60 | TCK | input | JTAG test clock input with an internal pull-up resistor. |
| 61 | GPIO37/TDO | output | General-purpose I/O 37, default function JTAG test data output (TDO), which is tri-stated when JTAG is inactive. |
| 62 | TMS | bidirectional | JTAG test mode select with an internal pull-up; an external 2.2kΩ pull-up to VDDIO is recommended. |
| 63 | GPIO35/TDI | input | General-purpose I/O 35, default function JTAG test data input (TDI); enable an internal or external pull-up to avoid a floating input. |
| 64 | GPIO32 | bidirectional | General-purpose I/O 32, multiplexed with I2CA_SDA, SPIB_CLK, EPWM8_B, LINA_TX and CANA_TX. |
| 65 | GPIO56 | bidirectional | General-purpose I/O 56, multiplexed with SPIA_CLK, EQEP2_STROBE, SCIB_TX, SD1_D3 and SPIB_SIMO. |
| 66 | GPIO57 | bidirectional | General-purpose I/O 57, multiplexed with SPIA_STE, EQEP2_INDEX, SCIB_RX, SD1_C3 and SPIB_SOMI. |
| 67 | GPIO58 | bidirectional | General-purpose I/O 58, multiplexed with OUTPUTXBAR1, SPIB_CLK, SD1_D4, LINA_TX and CANB_TX. |
| 68 | GPIO18_X2 | bidirectional | General-purpose I/O 18, usable only when INTOSC clocks the system and X1 has an external pull-down (about 1kΩ); also crystal oscillator output X2. |
| 69 | X1 | bidirectional | Crystal oscillator input or single-ended 3.3V clock input, which must be configured by software before the oscillator is enabled. |
| 70 | VDDIO | power_in | 3.3V digital I/O supply pin, requiring a minimum 0.1µF decoupling capacitor. |
| 71 | VDD | power_in | 1.2V digital logic supply pin, requiring decoupling capacitance near each VDD pin. |
| 72 | VSS | power_in | Digital ground pin that must be connected to the board ground. |
| 73 | VREGENZ | input | Internal regulator enable with internal pull-down; tie to VSS to enable the internal VREG or to VDDIO to use an external supply. |
| 74 | GPIO8 | bidirectional | General-purpose I/O 8, multiplexed with EPWM5_A, CANB_TX, ADCSOCAO, EQEP1_STROBE and I2CA_SCL. |
| 75 | GPIO4 | bidirectional | General-purpose I/O 4, multiplexed with EPWM3_A, OUTPUTXBAR3, CANA_TX and FSIRXA_CLK. |
| 76 | GPIO3 | bidirectional | General-purpose I/O 3, multiplexed with EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL, SPIA_CLK and SCIA_RX. |
| 77 | GPIO2 | bidirectional | General-purpose I/O 2, multiplexed with EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA, SCIA_TX and FSIRXA_D1. |
| 78 | GPIO1 | bidirectional | General-purpose I/O 1, multiplexed with EPWM1_B and I2CA_SCL. |
| 79 | GPIO0 | bidirectional | General-purpose I/O 0, multiplexed with EPWM1_A and I2CA_SDA. |
| 80 | VDDIO_SW | power_in | 3.3V supply for the internal DC/DC regulator, which requires a 20µF bulk input capacitor and must be connected to VDDIO. |
| 81 | GPIO23_VSW | bidirectional | General-purpose I/O 23, which is the internal DC/DC switch output (VSW) when DCDCEN is set. |
| 82 | VSS_SW | power_in | Internal DC/DC regulator ground that must be connected to VSS. |
| 83 | GPIO22_VFBSW | bidirectional | General-purpose I/O 22, which is the DC/DC feedback (VFBSW) pin by default when the internal regulator is used. |
| 84 | GPIO7 | bidirectional | General-purpose I/O 7, multiplexed with EPWM4_B, OUTPUTXBAR5, EQEP1_B, CANB_RX and SPIB_SIMO. |
| 85 | GPIO40 | bidirectional | General-purpose I/O 40, multiplexed with PMBUSA_SDA, FSIRXA_D0, SCIB_TX and EQEP1_A. |
| 86 | VSS | power_in | Digital ground pin that must be connected to the board ground. |
| 87 | VDD | power_in | 1.2V digital logic supply pin, requiring decoupling capacitance near each VDD pin. |
| 88 | VDDIO | power_in | 3.3V digital I/O supply pin, requiring a minimum 0.1µF decoupling capacitor. |
| 89 | GPIO5 | bidirectional | General-purpose I/O 5, multiplexed with EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE and FSITXA_D1. |
| 90 | GPIO9 | bidirectional | General-purpose I/O 9, multiplexed with EPWM5_B, SCIB_TX, OUTPUTXBAR6, SCIA_RX and SPIA_CLK. |
| 91 | GPIO39 | bidirectional | General-purpose I/O 39, multiplexed with CANB_RX and FSIRXA_CLK. |
| 92 | GPIO59 | bidirectional | General-purpose I/O 59, multiplexed with OUTPUTXBAR2, SPIB_STE, SD1_C4, LINA_RX and CANB_RX. |
| 93 | GPIO10 | bidirectional | General-purpose I/O 10, multiplexed with EPWM6_A, CANB_RX, ADCSOCBO, EQEP1_A and I2CA_SDA. |
| 94 | GPIO34 | bidirectional | General-purpose I/O 34, multiplexed with OUTPUTXBAR1 and PMBUSA_SDA. |
| 95 | GPIO15 | bidirectional | General-purpose I/O 15, multiplexed with EPWM8_B, SCIB_RX, OUTPUTXBAR4, PMBUSA_SCL and SPIB_STE. |
| 96 | GPIO14 | bidirectional | General-purpose I/O 14, multiplexed with EPWM8_A, SCIB_TX, OUTPUTXBAR3, PMBUSA_SDA and SPIB_CLK. |
| 97 | GPIO6 | bidirectional | General-purpose I/O 6, multiplexed with EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, CANB_TX and SPIB_SOMI. |
| 98 | GPIO30 | bidirectional | General-purpose I/O 30, multiplexed with CANA_RX, SPIB_SIMO, OUTPUTXBAR7, EQEP1_STROBE and SD1_D4. |
| 99 | GPIO31 | bidirectional | General-purpose I/O 31, multiplexed with CANA_TX, SPIB_SOMI, OUTPUTXBAR8, EQEP1_INDEX, SD1_C4 and FSIRXA_D1. |
| 100 | GPIO29 | bidirectional | General-purpose I/O 29, multiplexed with SCIA_TX, EPWM7_B, OUTPUTXBAR6, EQEP1_B, SD1_C3, LINA_RX, SPIB_STE and ERRORSTS. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-100(14x14) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 100 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDDIO supply voltage referenced to VSS | VDDIO | -0.3 | | 4.6 | V | 以 VSS 为基准 | 59 |
| VDDA supply voltage referenced to VSSA | VDDA | -0.3 | | 4.6 | V | 以 VSSA 为基准 | 59 |
| VDD supply voltage referenced to VSS | VDD | -0.3 | | 1.5 | V | 以 VSS 为基准 | 59 |
| Input voltage | VIN | -0.3 | | 4.6 | V | (3.3V) | 59 |
| Output voltage | VO | -0.3 | | 4.6 | V | | 59 |
| Digital input clamp current per pin | IIK | -20 | | 20 | mA | VIN < VSS 或 VIN > VDDIO | 59 |
| Analog input clamp current per pin | IIKANALOG | -20 | | 20 | mA | VIN < VSSA 或 VIN > VDDA | 59 |
| Digital output current per pin | IOUT | -20 | | 20 | mA | | 59 |
| Natural ventilation operating temperature | TA | -40 | | 125 | °C | 自然通风 | 59 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 59 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 59 |
| ESD human body model HBM | V(ESD) | -2000 | | 2000 | V | HBM, JS-001, 100-pin PZ, S temperature range | 59 |
| ESD charged device model all pins | V(ESD) | -500 | | 500 | V | CDM, JESD22-C101, 100-pin PZ | 59 |
| VDDIO and VDDA supply, internal BOR disabled | VDDIO/VDDA | 2.8 | 3.3 | 3.63 | V | 禁用内部 BOR | 60 |
| VDDIO and VDDA supply, internal BOR enabled | VDDIO/VDDA | | 3.3 | 3.63 | V | 启用内部 BOR | 60 |
| Device supply voltage VDD | VDD | 1.14 | 1.2 | 1.32 | V | | 60 |
| Junction temperature S version | TJ | -40 | | 125 | °C | S 版本 | 60 |
| Low-level output voltage | VOL | | | 0.4 | V | IOL=IOL 最大值 | 68 |
| Low-level output voltage | VOL | | | 0.2 | V | IOL = 100µA | 68 |
| High-level input voltage | VIH | 2 | | | V | (3.3V) | 68 |
| Low-level input voltage | VIL | | | 0.8 | V | (3.3V) | 68 |
| Input hysteresis | VHYSTERESIS | 150 | | | mV | | 68 |
| Internal regulator output | VVREG | 1.14 | 1.2 | 1.32 | V | | 81 |
| Crystal load capacitance | CL1、CL2 | 12 | | 24 | pF | | 94 |
| Internal oscillator frequency INTOSC1 and INTOSC2 | fINTOSC | 9.7 | 10 | 10.3 | MHz | INTOSC1 和 INTOSC2 | 95 |
| INTOSC frequency stability over temperature and voltage | fINTOSC-STABILITY | -3 | | 3 | % | 频率稳定性 | 96 |
| INTOSC frequency stability at VDD, 30°C | fINTOSC-STABILITY | -0.2 | | 0.2 | % | VDD 上的频率稳定性 30°C | 96 |
| INTOSC frequency stability at room temperature, nominal VDD | fINTOSC-STABILITY | -0.1 | | 0.1 | % | 室温下的频率稳定性 30°C,标称 VDD | 96 |
| ADC clock frequency | ADCCLK | 5 | | 50 | MHz | ADCCLK(源自 PERx.SYSCLK) | 124 |
| ADC conversion range internal reference 3.3V range | VREFHI-VREFLO | 0 | | 3.3 | V | 内部基准电压 = 3.3V 范围 | 124 |
| ADC conversion range internal reference 2.5V range | VREFHI-VREFLO | 0 | | 2.5 | V | 内部基准电压 = 2.5V 范围 | 124 |
| ADC gain error internal reference | | -45 | | 45 | LSB | 内部基准电压 | 125 |
| ADC gain error external reference | | -5 | | 5 | LSB | 外部基准 | 125 |
| ADC offset error | | -5 | | 5 | LSB | | 125 |
| ADC channel-to-channel gain error | | -2 | | 2 | LSB | | 125 |
| ADC-to-ADC gain error | | -4 | | 4 | LSB | 所有 ADC 的 VREFHI 和 VREFLO 都相同 | 125 |
| ADC differential nonlinearity DNL | DNL | -1 | | 1 | LSB | | 125 |
| ADC integral nonlinearity INL | INL | -2 | | 2 | LSB | | 125 |
| Buffered DAC output voltage range, RL 5kΩ | VOUT | 0.3 | | | V | RL = 5kΩ | 137 |
| Buffered DAC output voltage range, RL 1kΩ | VOUT | 0.6 | | | V | RL = 1kΩ | 137 |
| Buffered DAC load regulation | | -1 | | 1 | mV/V | | 137 |
| Buffered DAC offset error | | -10 | | 10 | mV | 中点 | 137 |
| Buffered DAC gain error | | -2.5 | | 2.5 | FSR % | | 137 |
| Buffered DAC DNL | DNL | -1 | | 1 | LSB | 已更正端点 | 137 |
| Buffered DAC INL | INL | -5 | | 5 | LSB | 已更正端点 | 137 |
| Buffered DAC voltage output slew rate | | 2.8 | 4.5 | | V/µs | 从 0.3V 到 3V 转换的压摆率 | 137 |
| Buffered DAC reference input resistance | | 160 | 200 | 240 | kΩ | VDAC 或 VREFHI | 137 |
| Comparator input-referred offset | | -20 | | 20 | mV | 低共模,反相输入设置为 50mV | 144 |
| CMPSS DAC static offset error | | -25 | | 25 | mV | | 145 |
| CMPSS DAC static gain error | | -2 | | 2 | FSR % | | 145 |
| CMPSS DAC static DNL | DNL | -1 | | 4 | LSB | 已更正端点 | 145 |
| CMPSS DAC static INL | INL | -16 | | 16 | LSB | 已更正端点 | 145 |
| CMPSS DAC VDAC load | VDAC load | 6 | 8 | 10 | kΩ | 当 VDAC 为基准时 | 145 |
| Junction-to-ambient thermal resistance high-k PCB | RΘJA | | 46.1 | | °C/W | 0 lfm | 69 |
| Junction-to-case thermal resistance | RΘJC | | 7.6 | | °C/W | | 69 |
## CAD (KiCad official)
- Symbol: `F280041PZSR`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `f280041pzsr-etched.step` / `f280041pzsr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `f280041pzsr.step` / `f280041pzsr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/f280041pzsr.pdf) (270 pp, sha256 `f0eccdafc7ec75fa`, retrieved 2026-11-02, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/f280041pzsr-datasheet.pdf)