component
F280041PZS
Public Made by Adomby adom
Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
4dcda37
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744
{
"slug": "f280041pzs",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"embedded processors & controllers",
"f280041pzs",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"f280041pzs.kicad_sym",
"f280041pzs.kicad_mod",
"f280041pzs.glb",
"f280041pzs.step",
"f280041pzs.lbr",
"docs/hero.png",
"docs/f280041pzs-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"f280041pzs-hero.glb",
"f280041pzs-hero.overlay.json",
"f280041pzs-etched.glb"
],
"component": {
"mpn": "F280041PZS",
"manufacturer": "Texas Instruments",
"package": "LQFP-100(14x14)",
"pin_count": 100,
"category": "Embedded Processors & Controllers",
"subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
"datasheet": "http://www.ti.com/cn/lit/gpn/tms320f280041",
"parts": {
"symbol": "f280041pzs.kicad_sym",
"footprint": "f280041pzs.kicad_mod",
"model_3d": "f280041pzs-hero.glb",
"model_3d_plain": "f280041pzs-etched.glb",
"model_3d_step": "f280041pzs-etched.step",
"model_3d_step_plain": "f280041pzs.step",
"lbr": "f280041pzs.lbr"
},
"distributor_links": {
"lcsc": "C1499574",
"digikey": "296-F280041PZS-ND",
"mouser": "595-F280041PZS"
},
"distributor_check": {
"checked_at": "2026-11-02T17:33:08Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-F280041PZS-ND",
"status": "found"
},
"mouser": {
"pn": "595-F280041PZS",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GPIO28",
"type": "bidirectional",
"description": "General-purpose I/O 28 with alternate functions including SCIA_RX, EPWM7_A and SD1_D3."
},
{
"number": "2",
"name": "XRSn",
"type": "bidirectional",
"description": "Device reset input and watchdog reset output; open-drain with internal pull-up, requires a 2.2kΩ to 10kΩ resistor to VDDIO."
},
{
"number": "3",
"name": "VDDIO",
"type": "power_in",
"description": "3.3V digital I/O supply pin; place a decoupling capacitor of at least 0.1µF on each VDDIO pin."
},
{
"number": "4",
"name": "VDD",
"type": "power_in",
"description": "1.2V digital logic supply pin; TI recommends a total decoupling capacitance of about 20µF near the VDD pins."
},
{
"number": "5",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin that must be connected to the board ground."
},
{
"number": "6",
"name": "A6/PGA5_OF",
"type": "input",
"description": "ADC-A analog input 6 that is also the optional PGA-5 output filter node."
},
{
"number": "7",
"name": "B2/C6/PGA3_OF",
"type": "input",
"description": "ADC-B analog input 2 multiplexed with ADC-C input 6 and the optional PGA-3 output filter node."
},
{
"number": "8",
"name": "B3/VDAC",
"type": "input",
"description": "ADC-B analog input 3 and optional external reference for the on-chip DAC; requires a 1µF capacitor if used as the DAC reference."
},
{
"number": "9",
"name": "A2/B6/PGA1_OF",
"type": "input",
"description": "ADC-A analog input 2 multiplexed with ADC-B input 6 and the optional PGA-1 output filter node."
},
{
"number": "10",
"name": "A3",
"type": "input",
"description": "ADC-A analog input 3 that also serves as a CMPSS-1 comparator input."
},
{
"number": "11",
"name": "VDDA",
"type": "power_in",
"description": "3.3V analog supply pin; place a decoupling capacitor of at least 2.2µF to VSSA on each pin."
},
{
"number": "12",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground pin."
},
{
"number": "13",
"name": "PGA5_GND",
"type": "power_in",
"description": "Kelvin ground reference for PGA-5 input."
},
{
"number": "14",
"name": "PGA1_GND",
"type": "power_in",
"description": "Kelvin ground reference for PGA-1 input."
},
{
"number": "15",
"name": "PGA3_GND",
"type": "power_in",
"description": "Kelvin ground reference for PGA-3 input."
},
{
"number": "16",
"name": "PGA5_IN",
"type": "input",
"description": "Input of programmable gain amplifier PGA-5."
},
{
"number": "17",
"name": "C4",
"type": "input",
"description": "ADC-C analog input 4 that also serves as a CMPSS-5 comparator input."
},
{
"number": "18",
"name": "PGA1_IN",
"type": "input",
"description": "Input of programmable gain amplifier PGA-1."
},
{
"number": "19",
"name": "C0",
"type": "input",
"description": "ADC-C analog input 0 that also serves as a CMPSS-1 comparator input."
},
{
"number": "20",
"name": "PGA3_IN",
"type": "input",
"description": "Input of programmable gain amplifier PGA-3."
},
{
"number": "21",
"name": "C2",
"type": "input",
"description": "ADC-C analog input 2 that also serves as a CMPSS-3 comparator input."
},
{
"number": "22",
"name": "A1/DACB_OUT",
"type": "output",
"description": "ADC-A analog input 1 multiplexed with the buffered DAC-B output."
},
{
"number": "23",
"name": "A0/B15/C15/DACA_OUT",
"type": "output",
"description": "ADC-A analog input 0 multiplexed with ADC-B/ADC-C inputs and the buffered DAC-A output."
},
{
"number": "24",
"name": "VREFHIB/VREFHIC",
"type": "bidirectional",
"description": "ADC-B and ADC-C high reference voltage; place at least 2.2µF between each and its matching VREFLO pin."
},
{
"number": "25",
"name": "VREFHIA",
"type": "bidirectional",
"description": "ADC-A high reference voltage; place at least 2.2µF between this pin and VREFLOA."
},
{
"number": "26",
"name": "VREFLOB/VREFLOC",
"type": "input",
"description": "ADC-B and ADC-C low reference voltage."
},
{
"number": "27",
"name": "VREFLOA",
"type": "input",
"description": "ADC-A low reference voltage."
},
{
"number": "28",
"name": "C5/PGA6_IN",
"type": "input",
"description": "ADC-C analog input 5 multiplexed with the input of PGA-6."
},
{
"number": "29",
"name": "C1",
"type": "input",
"description": "ADC-C analog input 1 that also serves as a CMPSS-2 comparator input."
},
{
"number": "30",
"name": "PGA2_IN",
"type": "input",
"description": "Input of programmable gain amplifier PGA-2."
},
{
"number": "31",
"name": "C3/PGA4_IN",
"type": "input",
"description": "ADC-C analog input 3 multiplexed with the input of PGA-4."
},
{
"number": "32",
"name": "PGA2_GND/PGA4_GND/PGA6_GND",
"type": "power_in",
"description": "Shared Kelvin ground reference for PGA-2, PGA-4 and PGA-6."
},
{
"number": "33",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground pin."
},
{
"number": "34",
"name": "VDDA",
"type": "power_in",
"description": "3.3V analog supply pin; place a decoupling capacitor of at least 2.2µF to VSSA."
},
{
"number": "35",
"name": "A5",
"type": "input",
"description": "ADC-A analog input 5 that also serves as a CMPSS-2 comparator input."
},
{
"number": "36",
"name": "A4/B8/PGA2_OF",
"type": "input",
"description": "ADC-A analog input 4 multiplexed with ADC-B input 8 and the optional PGA-2 output filter node."
},
{
"number": "37",
"name": "A8/PGA6_OF",
"type": "input",
"description": "ADC-A analog input 8 multiplexed with the optional PGA-6 output filter node."
},
{
"number": "38",
"name": "A9",
"type": "input",
"description": "ADC-A analog input 9 that also serves as a CMPSS-6 comparator input."
},
{
"number": "39",
"name": "B4/C8/PGA4_OF",
"type": "input",
"description": "ADC-B analog input 4 multiplexed with ADC-C input 8 and the optional PGA-4 output filter node."
},
{
"number": "40",
"name": "A10/B1/C10/PGA7_OF",
"type": "input",
"description": "ADC-A analog input 10 multiplexed with ADC-B and ADC-C inputs and the optional PGA-7 output filter node."
},
{
"number": "41",
"name": "B0",
"type": "input",
"description": "ADC-B analog input 0 that also serves as a CMPSS-7 comparator input."
},
{
"number": "42",
"name": "PGA7_GND",
"type": "power_in",
"description": "Kelvin ground reference for PGA-7 input."
},
{
"number": "43",
"name": "PGA7_IN",
"type": "input",
"description": "Input of programmable gain amplifier PGA-7."
},
{
"number": "44",
"name": "C14",
"type": "input",
"description": "ADC-C analog input 14 that also serves as a CMPSS-7 comparator input."
},
{
"number": "45",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin that must be connected to the board ground."
},
{
"number": "46",
"name": "VDD",
"type": "power_in",
"description": "1.2V digital logic supply pin; requires decoupling capacitors on each VDD pin."
},
{
"number": "47",
"name": "VDDIO",
"type": "power_in",
"description": "3.3V digital I/O supply pin; place a decoupling capacitor of at least 0.1µF on this pin."
},
{
"number": "48",
"name": "FLT2",
"type": "unconnected",
"description": "Flash test pin 2 reserved by TI; must be left unconnected."
},
{
"number": "49",
"name": "FLT1",
"type": "unconnected",
"description": "Flash test pin 1 reserved by TI; must be left unconnected."
},
{
"number": "50",
"name": "GPIO13",
"type": "bidirectional",
"description": "General-purpose I/O 13 with alternate functions including EPWM7_B, CANB_RX and PMBUSA_ALERT."
},
{
"number": "51",
"name": "GPIO12",
"type": "bidirectional",
"description": "General-purpose I/O 12 with alternate functions including EPWM7_A, CANB_TX and SCIB_TX."
},
{
"number": "52",
"name": "GPIO11",
"type": "bidirectional",
"description": "General-purpose I/O 11 with alternate functions including EPWM6_B, SCIB_RX and SPIA_STE."
},
{
"number": "53",
"name": "GPIO33",
"type": "bidirectional",
"description": "General-purpose I/O 33 with alternate functions including I2CA_SCL, LINA_RX and CANA_RX."
},
{
"number": "54",
"name": "GPIO16",
"type": "bidirectional",
"description": "General-purpose I/O 16 with alternate functions including SPIA_SIMO, SCIA_TX and XCLKOUT."
},
{
"number": "55",
"name": "GPIO17",
"type": "bidirectional",
"description": "General-purpose I/O 17 with alternate functions including SPIA_SOMI, SCIA_RX and PMBUSA_SDA."
},
{
"number": "56",
"name": "GPIO24",
"type": "bidirectional",
"description": "General-purpose I/O 24 with alternate functions including EQEP2_A, SCIA_TX and ERRORSTS."
},
{
"number": "57",
"name": "GPIO25",
"type": "bidirectional",
"description": "General-purpose I/O 25 with alternate functions including EQEP2_B, SCIA_RX and FSITXA_D1."
},
{
"number": "58",
"name": "GPIO26",
"type": "bidirectional",
"description": "General-purpose I/O 26 with alternate functions including EQEP2_INDEX, SPIB_CLK and I2CA_SDA."
},
{
"number": "59",
"name": "GPIO27",
"type": "bidirectional",
"description": "General-purpose I/O 27 with alternate functions including EQEP2_STROBE, SPIB_STE and I2CA_SCL."
},
{
"number": "60",
"name": "TCK",
"type": "input",
"description": "JTAG test clock input with an internal pull-up resistor."
},
{
"number": "61",
"name": "GPIO37/TDO",
"type": "output",
"description": "JTAG test data output TDO by default; GPIO37 when reconfigured. TDO is tri-stated when no JTAG activity; enable pull-up or add external pull-up."
},
{
"number": "62",
"name": "TMS",
"type": "bidirectional",
"description": "JTAG test mode select with internal pull-up; add an external 2.2kΩ pull-up to VDDIO recommended."
},
{
"number": "63",
"name": "GPIO35/TDI",
"type": "input",
"description": "JTAG test data input TDI by default; GPIO35 when reconfigured. Enable internal pull-up or add external pull-up to avoid a floating input."
},
{
"number": "64",
"name": "GPIO32",
"type": "bidirectional",
"description": "General-purpose I/O 32 with alternate functions including I2CA_SDA, SPIB_CLK and FSIRXA_D0."
},
{
"number": "65",
"name": "GPIO56",
"type": "bidirectional",
"description": "General-purpose I/O 56 with alternate functions including SPIA_CLK, EQEP2_STROBE and SCIB_TX."
},
{
"number": "66",
"name": "GPIO57",
"type": "bidirectional",
"description": "General-purpose I/O 57 with alternate functions including SPIA_STE, EQEP2_INDEX and SCIB_RX."
},
{
"number": "67",
"name": "GPIO58",
"type": "bidirectional",
"description": "General-purpose I/O 58 with alternate functions including OUTPUTXBAR1, SPIB_CLK and LINA_TX."
},
{
"number": "68",
"name": "GPIO18_X2",
"type": "bidirectional",
"description": "General-purpose I/O 18 or crystal oscillator output X2; GPIO use requires INTOSC clocking and a 1kΩ pull-down on X1."
},
{
"number": "69",
"name": "X1",
"type": "bidirectional",
"description": "Crystal oscillator input or single-ended 3.3V clock input; must be configured by software before enabling the crystal oscillator."
},
{
"number": "70",
"name": "VDDIO",
"type": "power_in",
"description": "3.3V digital I/O supply pin; place a decoupling capacitor of at least 0.1µF on this pin."
},
{
"number": "71",
"name": "VDD",
"type": "power_in",
"description": "1.2V digital logic supply pin; requires decoupling capacitors on each VDD pin."
},
{
"number": "72",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin that must be connected to the board ground."
},
{
"number": "73",
"name": "VREGENZ",
"type": "input",
"description": "Internal regulator enable with internal pull-down; tie to VSS to enable the internal VREG and to VDDIO for external supply."
},
{
"number": "74",
"name": "GPIO8",
"type": "bidirectional",
"description": "General-purpose I/O 8 with alternate functions including EPWM5_A, SCIA_TX and SPIA_SIMO."
},
{
"number": "75",
"name": "GPIO4",
"type": "bidirectional",
"description": "General-purpose I/O 4 with alternate functions including EPWM3_A, CANA_TX and FSIRXA_CLK."
},
{
"number": "76",
"name": "GPIO3",
"type": "bidirectional",
"description": "General-purpose I/O 3 with alternate functions including EPWM2_B, SPIA_CLK and SCIA_RX."
},
{
"number": "77",
"name": "GPIO2",
"type": "bidirectional",
"description": "General-purpose I/O 2 with alternate functions including EPWM2_A, OUTPUTXBAR1 and SCIA_TX."
},
{
"number": "78",
"name": "GPIO1",
"type": "bidirectional",
"description": "General-purpose I/O 1 with alternate functions including EPWM1_B and I2CA_SCL."
},
{
"number": "79",
"name": "GPIO0",
"type": "bidirectional",
"description": "General-purpose I/O 0 with alternate functions including EPWM1_A and I2CA_SDA."
},
{
"number": "80",
"name": "VDDIO_SW",
"type": "power_in",
"description": "3.3V supply for the internal DC-DC regulator; requires 20µF input capacitance and must be tied to VDDIO."
},
{
"number": "81",
"name": "GPIO23_VSW",
"type": "bidirectional",
"description": "General-purpose I/O 23 by default configured as the DC-DC switching output VSW when the internal regulator is enabled."
},
{
"number": "82",
"name": "VSS_SW",
"type": "power_in",
"description": "Internal DC-DC regulator ground; must be connected to VSS."
},
{
"number": "83",
"name": "GPIO22_VFBSW",
"type": "bidirectional",
"description": "General-purpose I/O 22 by default configured as the DC-DC feedback input VFBSW; connect to the VDD rail near the device when used."
},
{
"number": "84",
"name": "GPIO7",
"type": "bidirectional",
"description": "General-purpose I/O 7 with alternate functions including EPWM4_B, CANB_RX and SPIB_SIMO."
},
{
"number": "85",
"name": "GPIO40",
"type": "bidirectional",
"description": "General-purpose I/O 40 with alternate functions including PMBUSA_SDA, FSIRXA_D0 and EQEP1_A."
},
{
"number": "86",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin that must be connected to the board ground."
},
{
"number": "87",
"name": "VDD",
"type": "power_in",
"description": "1.2V digital logic supply pin; requires decoupling capacitors on each VDD pin."
},
{
"number": "88",
"name": "VDDIO",
"type": "power_in",
"description": "3.3V digital I/O supply pin; place a decoupling capacitor of at least 0.1µF on this pin."
},
{
"number": "89",
"name": "GPIO5",
"type": "bidirectional",
"description": "General-purpose I/O 5 with alternate functions including EPWM3_B, CANA_RX and SPIA_STE."
},
{
"number": "90",
"name": "GPIO9",
"type": "bidirectional",
"description": "General-purpose I/O 9 with alternate functions including EPWM5_B, SCIB_TX and SPIA_CLK."
},
{
"number": "91",
"name": "GPIO39",
"type": "bidirectional",
"description": "General-purpose I/O 39 with alternate functions including CANB_RX and FSIRXA_CLK."
},
{
"number": "92",
"name": "GPIO59",
"type": "bidirectional",
"description": "General-purpose I/O 59 with alternate functions including OUTPUTXBAR2, SPIB_STE and CANB_RX."
},
{
"number": "93",
"name": "GPIO10",
"type": "bidirectional",
"description": "General-purpose I/O 10 with alternate functions including EPWM6_A, CANB_RX and I2CA_SDA."
},
{
"number": "94",
"name": "GPIO34",
"type": "bidirectional",
"description": "General-purpose I/O 34 with alternate functions including OUTPUTXBAR1 and PMBUSA_SDA."
},
{
"number": "95",
"name": "GPIO15",
"type": "bidirectional",
"description": "General-purpose I/O 15 with alternate functions including EPWM8_B, SCIB_RX and SPIB_STE."
},
{
"number": "96",
"name": "GPIO14",
"type": "bidirectional",
"description": "General-purpose I/O 14 with alternate functions including EPWM8_A, SCIB_TX and SPIB_CLK."
},
{
"number": "97",
"name": "GPIO6",
"type": "bidirectional",
"description": "General-purpose I/O 6 with alternate functions including EPWM4_A, SYNCOUT and CANB_TX."
},
{
"number": "98",
"name": "GPIO30",
"type": "bidirectional",
"description": "General-purpose I/O 30 with alternate functions including CANA_RX, SPIB_SIMO and SD1_D4."
},
{
"number": "99",
"name": "GPIO31",
"type": "bidirectional",
"description": "General-purpose I/O 31 with alternate functions including CANA_TX, SPIB_SOMI and SD1_C4."
},
{
"number": "100",
"name": "GPIO29",
"type": "bidirectional",
"description": "General-purpose I/O 29 with alternate functions including SCIA_TX, EPWM7_B and LINA_RX."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 146,
"cost_usd": 0.2572,
"at": "2026-11-02T17:32:44"
},
"datasheet": {
"url": "http://www.ti.com/cn/lit/gpn/tms320f280041",
"pages": 277,
"sha256": "867e7bb5ada6819c",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 100,
"described": 100,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "f280041pzs.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
16.0,
16.0,
1.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "f280041pzs-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
16.0,
16.0,
1.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "6ceb300f96e3880c39433e1f5bde6e6866cf248b8ae10d0c39c665910903b7ff",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}