component
F280040CPMQR
Public Made by Adomby adom
Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), QFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Set visibility: public
762393f
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250
{
"schema_version": 1,
"type": "component",
"slug": "f280040cpmqr",
"title": "F280040CPMQR",
"brief": "Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), QFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"single chip microcomputer-microcontroller",
"f280040cpmqr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "F280040CPMQR",
"manufacturer": "Texas Instruments",
"package": "QFP-64(10x10)",
"pin_count": 64,
"category": "Single Chip Microcomputer/Microcontroller",
"subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
"datasheet": "https://www.ti.com/lit/ds/symlink/f280040cpmqr.pdf",
"parts": {
"symbol": "f280040cpmqr.kicad_sym",
"footprint": "f280040cpmqr.kicad_mod",
"model_3d": "f280040cpmqr-hero.glb",
"model_3d_plain": "f280040cpmqr-etched.glb",
"model_3d_step": "f280040cpmqr-etched.step",
"model_3d_step_plain": "f280040cpmqr.step",
"lbr": "f280040cpmqr.lbr"
},
"distributor_links": {
"lcsc": "C2056206",
"digikey": "296-F280040CPMQRTR-ND",
"mouser": "595-F280040CPMQR"
},
"distributor_check": {
"checked_at": "2026-11-10T02:23:30Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-F280040CPMQRTR-ND",
"status": "found"
},
"mouser": {
"pn": "595-F280040CPMQR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GPIO29",
"type": "bidirectional",
"description": "General-purpose I/O 29 with mux options SCIA_TX, EPWM7_B, OUTPUTXBAR6, EQEP1_B, SD1_C3, EQEP2_INDEX, LINA_RX, SPIB_STE and ERRORSTS."
},
{
"number": "2",
"name": "GPIO28",
"type": "bidirectional",
"description": "General-purpose I/O 28 with mux options SCIA_RX, EPWM7_A, OUTPUTXBAR5, EQEP1_A, SD1_D3, EQEP2_STROBE, LINA_TX, SPIB_CLK and ERRORSTS."
},
{
"number": "3",
"name": "XRSn",
"type": "bidirectional",
"description": "Device reset input and watchdog reset open-drain output with internal pull-up; place a 2.2k-10k resistor to VDDIO and at most 100nF to VSS."
},
{
"number": "4",
"name": "VDD",
"type": "power_in",
"description": "1.2V digital logic supply; about 20uF total decoupling near the VDD pins is recommended."
},
{
"number": "5",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; must be connected to board ground."
},
{
"number": "6",
"name": "A6/PGA5_OF",
"type": "input",
"description": "ADC-A input 6, PGA-5 filtered output (optional), CMPSS-5 inputs and AIO228 digital input."
},
{
"number": "7",
"name": "B2/C6/PGA3_OF",
"type": "input",
"description": "ADC-B input 2, ADC-C input 6, PGA-3 filtered output (optional), CMPSS-3 inputs and AIO226 digital input."
},
{
"number": "8",
"name": "B3/VDAC",
"type": "input",
"description": "ADC-B input 3 or optional external reference for the on-chip DAC; has a non-disableable 100pF capacitor to VSSA, and at least 1uF is required when used as DAC reference."
},
{
"number": "9",
"name": "A2/B6/PGA1_OF",
"type": "input",
"description": "ADC-A input 2, ADC-B input 6, PGA-1 filtered output (optional), CMPSS-1 inputs and AIO224 digital input."
},
{
"number": "10",
"name": "PGA1_GND,PGA3_GND,PGA5_GND",
"type": "power_in",
"description": "Kelvin ground reference shared by PGA-1, PGA-3 and PGA-5; tie to VSSA if unused."
},
{
"number": "11",
"name": "C4/PGA5_IN",
"type": "input",
"description": "ADC-C input 4 and PGA-5 input, with CMPSS-5 inputs and AIO239 digital input."
},
{
"number": "12",
"name": "C0/PGA1_IN",
"type": "input",
"description": "ADC-C input 0 and PGA-1 input, with CMPSS-1 inputs and AIO237 digital input."
},
{
"number": "13",
"name": "C2/PGA3_IN",
"type": "input",
"description": "ADC-C input 2 and PGA-3 input, with CMPSS-3 inputs and AIO244 digital input."
},
{
"number": "14",
"name": "A1/DACB_OUT",
"type": "bidirectional",
"description": "ADC-A input 1, buffered DAC-B output and AIO232 digital input."
},
{
"number": "15",
"name": "A0/B15/C15/DACA_OUT",
"type": "bidirectional",
"description": "ADC-A input 0, ADC-B input 15, ADC-C input 15, buffered DAC-A output and AIO231 digital input."
},
{
"number": "16",
"name": "VREFHIA,VREFHIB,VREFHIC",
"type": "bidirectional",
"description": "ADC-A/B/C high reference voltage, externally driven or device-driven; place at least 2.2uF to the VREFLO pin and do not load externally."
},
{
"number": "17",
"name": "VREFLOA,VREFLOB,VREFLOC",
"type": "input",
"description": "ADC-A/B/C low reference voltage; tie to VSSA."
},
{
"number": "18",
"name": "C1/PGA2_IN",
"type": "input",
"description": "ADC-C input 1 and PGA-2 input, with CMPSS-2 inputs and AIO238 digital input."
},
{
"number": "19",
"name": "C3/PGA4_IN",
"type": "input",
"description": "ADC-C input 3 and PGA-4 input, with CMPSS-4 inputs and AIO245 digital input."
},
{
"number": "20",
"name": "PGA2_GND,PGA4_GND,PGA6_GND",
"type": "power_in",
"description": "Kelvin ground reference shared by PGA-2, PGA-4 and PGA-6; tie to VSSA if unused."
},
{
"number": "21",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground."
},
{
"number": "22",
"name": "VDDA",
"type": "power_in",
"description": "3.3V analog supply; place at least 2.2uF decoupling to VSSA."
},
{
"number": "23",
"name": "A4/B8/PGA2_OF",
"type": "input",
"description": "ADC-A input 4, ADC-B input 8, PGA-2 filtered output (optional), CMPSS-2 inputs and AIO225 digital input."
},
{
"number": "24",
"name": "B4/C8/PGA4_OF",
"type": "input",
"description": "ADC-B input 4, ADC-C input 8, PGA-4 filtered output (optional), CMPSS-4 inputs and AIO227 digital input."
},
{
"number": "25",
"name": "A10/B1/C10/PGA7_OF",
"type": "input",
"description": "ADC-A input 10, ADC-B input 1, ADC-C input 10, PGA-7 filtered output, CMPSS-7 inputs and AIO230 digital input."
},
{
"number": "26",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; must be connected to board ground."
},
{
"number": "27",
"name": "VDD",
"type": "power_in",
"description": "1.2V digital logic supply; about 20uF total decoupling near the VDD pins is recommended."
},
{
"number": "28",
"name": "VDDIO",
"type": "power_in",
"description": "3.3V digital I/O supply; place at least 0.1uF decoupling on each pin."
},
{
"number": "29",
"name": "FLT2",
"type": "unconnected",
"description": "Flash test pin 2 reserved for TI; must be left unconnected (on PMQ this location is not GPIO13)."
},
{
"number": "30",
"name": "FLT1",
"type": "unconnected",
"description": "Flash test pin 1 reserved for TI; must be left unconnected (on PMQ this location is not GPIO12)."
},
{
"number": "31",
"name": "GPIO11",
"type": "bidirectional",
"description": "General-purpose I/O 11 with mux options EPWM6_B, SCIB_RX, OUTPUTXBAR7, EQEP1_B, SPIA_STE and FSIRXA_D1."
},
{
"number": "32",
"name": "GPIO33",
"type": "bidirectional",
"description": "General-purpose I/O 33 with mux options I2CA_SCL, SPIB_STE, OUTPUTXBAR4, LINA_RX, SD1_C3, FSIRXA_CLK and CANA_RX."
},
{
"number": "33",
"name": "GPIO16",
"type": "bidirectional",
"description": "General-purpose I/O 16 with mux options SPIA_SIMO, CANB_TX, OUTPUTXBAR7, EPWM5_A, SCIA_TX, SD1_D1, EQEP1_STROBE, PMBUSA_SCL and XCLKOUT."
},
{
"number": "34",
"name": "GPIO17",
"type": "bidirectional",
"description": "General-purpose I/O 17 with mux options SPIA_SOMI, CANB_RX, OUTPUTXBAR8, EPWM5_B, SCIA_RX, SD1_C1, EQEP1_INDEX and PMBUSA_SDA."
},
{
"number": "35",
"name": "GPIO24",
"type": "bidirectional",
"description": "General-purpose I/O 24 with mux options OUTPUTXBAR1, EQEP2_A, EPWM8_A, SPIB_SIMO, SD1_D1, PMBUSA_SCL, SCIA_TX and active-low ERRORSTS."
},
{
"number": "36",
"name": "TCK",
"type": "input",
"description": "JTAG test clock with internal pull-up."
},
{
"number": "37",
"name": "GPIO37/TDO",
"type": "bidirectional",
"description": "General-purpose I/O 37, default JTAG TDO (tri-stated when no JTAG activity); enable internal pull-up or add external pull-up."
},
{
"number": "38",
"name": "TMS",
"type": "bidirectional",
"description": "JTAG test mode select with internal pull-up; add an external pull-up (2.2k recommended) to VDDIO; no TRSTn pin exists."
},
{
"number": "39",
"name": "GPIO35/TDI",
"type": "bidirectional",
"description": "General-purpose I/O 35, default JTAG TDI; enable internal pull-up or add external pull-up to avoid a floating input."
},
{
"number": "40",
"name": "GPIO32",
"type": "bidirectional",
"description": "General-purpose I/O 32 with mux options I2CA_SDA, SPIB_CLK, EPWM8_B, LINA_TX, SD1_D3, FSIRXA_D0 and CANA_TX."
},
{
"number": "41",
"name": "GPIO18_X2",
"type": "bidirectional",
"description": "General-purpose I/O 18 or crystal oscillator output X2; GPIO usable only when clocked by INTOSC with X1 pulled down (1k recommended)."
},
{
"number": "42",
"name": "X1",
"type": "bidirectional",
"description": "Crystal oscillator or single-ended 3.3V clock input; tie to VSS if unused."
},
{
"number": "43",
"name": "VDDIO",
"type": "power_in",
"description": "3.3V digital I/O supply; place at least 0.1uF decoupling on each pin."
},
{
"number": "44",
"name": "VDD",
"type": "power_in",
"description": "1.2V digital logic supply; about 20uF total decoupling near the VDD pins is recommended."
},
{
"number": "45",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; must be connected to board ground."
},
{
"number": "46",
"name": "VREGENZ",
"type": "input",
"description": "Internal regulator enable with internal pull-down; tie to VSS to enable internal VREG, or to VDDIO to use an external supply."
},
{
"number": "47",
"name": "GPIO8",
"type": "bidirectional",
"description": "General-purpose I/O 8 with mux options EPWM5_A, CANB_TX, ADCSOCAO, EQEP1_STROBE, SCIA_TX, SPIA_SIMO, I2CA_SCL and FSITXA_D1."
},
{
"number": "48",
"name": "GPIO4",
"type": "bidirectional",
"description": "General-purpose I/O 4 with mux options EPWM3_A, OUTPUTXBAR3, CANA_TX and FSIRXA_CLK."
},
{
"number": "49",
"name": "GPIO3",
"type": "bidirectional",
"description": "General-purpose I/O 3 with mux options EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL, SPIA_CLK, SCIA_RX and FSIRXA_D0."
},
{
"number": "50",
"name": "GPIO2",
"type": "bidirectional",
"description": "General-purpose I/O 2 with mux options EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA, SCIA_TX and FSIRXA_D1."
},
{
"number": "51",
"name": "GPIO1",
"type": "bidirectional",
"description": "General-purpose I/O 1 with mux options EPWM1_B and I2CA_SCL."
},
{
"number": "52",
"name": "GPIO0",
"type": "bidirectional",
"description": "General-purpose I/O 0 with mux options EPWM1_A and I2CA_SDA."
},
{
"number": "53",
"name": "VDDIO_SW",
"type": "power_in",
"description": "3.3V supply for the internal DC-DC regulator; needs 20uF bulk input capacitance when used and must be connected to VDDIO."
},
{
"number": "54",
"name": "GPIO23_VSW",
"type": "bidirectional",
"description": "GPIO23 or internal DC-DC switch output VSW (DC-DC mode by default); about 100pF internal capacitance."
},
{
"number": "55",
"name": "VSS_SW",
"type": "power_in",
"description": "Internal DC-DC regulator ground; must be connected to VSS."
},
{
"number": "56",
"name": "GPIO22_VFBSW",
"type": "bidirectional",
"description": "GPIO22 or internal DC-DC feedback VFBSW (DC-DC mode by default); connect to the node where L(VSW) meets the VDD rail when DC-DC is used."
},
{
"number": "57",
"name": "GPIO7",
"type": "bidirectional",
"description": "General-purpose I/O 7 with mux options EPWM4_B, OUTPUTXBAR5, EQEP1_B, CANB_RX, SPIB_SIMO and FSITXA_CLK."
},
{
"number": "58",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; must be connected to board ground."
},
{
"number": "59",
"name": "VDD",
"type": "power_in",
"description": "1.2V digital logic supply; about 20uF total decoupling near the VDD pins is recommended."
},
{
"number": "60",
"name": "VDDIO",
"type": "power_in",
"description": "3.3V digital I/O supply; place at least 0.1uF decoupling on each pin."
},
{
"number": "61",
"name": "GPIO5",
"type": "bidirectional",
"description": "General-purpose I/O 5 with mux options EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE and FSITXA_D1."
},
{
"number": "62",
"name": "GPIO9",
"type": "bidirectional",
"description": "General-purpose I/O 9 with mux options EPWM5_B, SCIB_TX, OUTPUTXBAR6, EQEP1_INDEX, SCIA_RX, SPIA_CLK and FSITXA_D0."
},
{
"number": "63",
"name": "GPIO10",
"type": "bidirectional",
"description": "General-purpose I/O 10 with mux options EPWM6_A, CANB_RX, ADCSOCBO, EQEP1_A, SCIB_TX, SPIA_SOMI, I2CA_SDA and FSITXA_CLK."
},
{
"number": "64",
"name": "GPIO6",
"type": "bidirectional",
"description": "General-purpose I/O 6 with mux options EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, CANB_TX, SPIB_SOMI and FSITXA_D0."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The 'PMQ' column and Figure 6-3 (Q-temperature 64-pin PM) put FLT2 on pin 29 and FLT1 on pin 30. The; Several pins are shared analog functions. Their type is a single best-fit choice. Pins 14 and 15 inc; Pin 10 gives the PGA ground pins (all 'I' type in the datasheet) as power_in. The GND-type call is m"
],
"pages_sent": 143,
"cost_usd": 1.0351,
"at": "2026-11-10T02:23:02"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/f280040cpmqr.pdf",
"pages": 270,
"sha256": "f0eccdafc7ec75fa",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 64,
"described": 64,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "f280040cpmqr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12,
12,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "f280040cpmqr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12,
12,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "8101ec218cfff6ee14c61281e2f14602095eef3f5fab569371d4fe7fa46bf699",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "QFP-64(10x10)",
"Category": "Single Chip Microcomputer/Microcontroller",
"Pins": "64"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "f0eccdafc7ec75faae5dd5a7cb5289045c09baf51725cfa412eb7ca86f085749",
"rows": [
{
"name": "Supply voltage VDDIO",
"symbol": "VDDIO",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "以 VSS 为基准",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Supply voltage VDDA",
"symbol": "VDDA",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "以 VSSA 为基准",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Supply voltage VDD",
"symbol": "VDD",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 1.5,
"conditions": "以 VSS 为基准",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Voltage difference between VDDIO and VDDIO_SW pins",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 0.3,
"conditions": "VDDIO 和 VDDIO_SW 引脚之间的电压差",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Input voltage",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "(3.3V)",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Output voltage",
"symbol": "VO",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Digital input clamp current (per pin)",
"symbol": "IIK",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "数字输入(每引脚), VIN < VSS 或 VIN > VDDIO",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Analog input clamp current (per pin)",
"symbol": "IIKANALOG",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "模拟输入(每引脚), VIN < VSSA 或 VIN > VDDA",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Total input clamp current (all inputs)",
"symbol": "IIKTOTAL",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "所有输入的总计",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Digital output current (per pin)",
"symbol": "IOUT",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "数字输出(每引脚)",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Natural ventilation temperature",
"symbol": "TA",
"kind": "absolute_maximum",
"unit": "°C",
"min": -40,
"typ": null,
"max": 125,
"conditions": "自然通风",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Operating junction temperature",
"symbol": "TJ",
"kind": "absolute_maximum",
"unit": "°C",
"min": -40,
"typ": null,
"max": 150,
"conditions": "工作结温",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Storage temperature",
"symbol": "Tstg",
"kind": "absolute_maximum",
"unit": "°C",
"min": -65,
"typ": null,
"max": 150,
"conditions": "贮存温度",
"source_page": 59,
"source": "datasheet"
},
{
"name": "Device supply voltage VDDIO and VDDA, internal BOR enabled",
"symbol": "VDDIO, VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": null,
"typ": 3.3,
"max": 3.63,
"conditions": "启用内部 BOR(最小值为公式 VBOR-VDDIO(MAX)+VBOR-GB)",
"source_page": 60,
"source": "datasheet"
},
{
"name": "Device supply voltage VDDIO and VDDA, internal BOR disabled",
"symbol": "VDDIO, VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": 2.8,
"typ": 3.3,
"max": 3.63,
"conditions": "禁用内部 BOR",
"source_page": 60,
"source": "datasheet"
},
{
"name": "Device supply voltage VDD",
"symbol": "VDD",
"kind": "recommended_operating",
"unit": "V",
"min": 1.14,
"typ": 1.2,
"max": 1.32,
"conditions": "",
"source_page": 60,
"source": "datasheet"
},
{
"name": "Natural ventilation temperature (Q version, AEC Q100 qualified)",
"symbol": "TA",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 125,
"conditions": "Q 版本(AEC Q100 认证)",
"source_page": 60,
"source": "datasheet"
},
{
"name": "Operating current IDD during operation",
"symbol": "IDD",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 61,
"max": 90,
"conditions": "运行期间的 VDD 电流消耗,请参阅节 7.5.4",
"source_page": 62,
"source": "datasheet"
},
{
"name": "Operating current IDDIO during operation",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 26,
"max": 45,
"conditions": "运行期间的 VDDIO 电流消耗,请参阅节 7.5.4",
"source_page": 62,
"source": "datasheet"
},
{
"name": "Operating current IDDA during operation",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 12,
"max": 30,
"conditions": "运行期间的 VDDA 电流消耗,请参阅节 7.5.4",
"source_page": 62,
"source": "datasheet"
},
{
"name": "Idle mode current IDD",
"symbol": "IDD",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 18,
"max": 40,
"conditions": "空闲模式:CPU 处于空闲模式,闪存被断电,XCLKOUT 被关闭",
"source_page": 62,
"source": "datasheet"
},
{
"name": "Idle mode current IDDIO",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 1.2,
"max": 4,
"conditions": "空闲模式",
"source_page": 62,
"source": "datasheet"
},
{
"name": "Idle mode current IDDA",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.9,
"max": 1.2,
"conditions": "空闲模式",
"source_page": 62,
"source": "datasheet"
},
{
"name": "Halt mode current IDD",
"symbol": "IDD",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.9,
"max": 20,
"conditions": "停机模式:CPU 处于停机模式,闪存被断电,XCLKOUT 被关闭",
"source_page": 62,
"source": "datasheet"
},
{
"name": "Halt mode current IDDIO",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.8,
"max": 4,
"conditions": "停机模式",
"source_page": 62,
"source": "datasheet"
},
{
"name": "Halt mode current IDDA",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.2,
"max": 0.5,
"conditions": "停机模式",
"source_page": 62,
"source": "datasheet"
},
{
"name": "Flash erase/program current IDD",
"symbol": "IDD",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 40,
"max": 70,
"conditions": "擦除/编程周期期间,SYSCLK 为 100MHz,禁用 VREG",
"source_page": 62,
"source": "datasheet"
},
{
"name": "Flash erase/program current IDDIO",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 33,
"max": 75,
"conditions": "擦除/编程周期期间",
"source_page": 62,
"source": "datasheet"
},
{
"name": "Flash erase/program current IDDA",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.1,
"max": 2.5,
"conditions": "擦除/编程周期期间",
"source_page": 62,
"source": "datasheet"
},
{
"name": "Low-level output voltage",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.4,
"conditions": "IOL=IOL 最大值",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Low-level output voltage",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.2,
"conditions": "IOL = 100µA",
"source_page": 68,
"source": "datasheet"
},
{
"name": "High-level output source current, all output pins",
"symbol": "IOH",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": -4,
"max": null,
"conditions": "所有输出引脚的高电平输出源电流",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Low-level output sink current, all output pins",
"symbol": "IOL",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 4,
"max": null,
"conditions": "所有输出引脚的低电平输出灌电流",
"source_page": 68,
"source": "datasheet"
},
{
"name": "High-level output impedance, all output pins",
"symbol": "ROH",
"kind": "electrical",
"unit": "Ω",
"min": null,
"typ": 70,
"max": null,
"conditions": "所有输出引脚的高电平输出阻抗",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Low-level output impedance, all output pins",
"symbol": "ROL",
"kind": "electrical",
"unit": "Ω",
"min": null,
"typ": 70,
"max": null,
"conditions": "所有输出引脚的低电平输出阻抗",
"source_page": 68,
"source": "datasheet"
},
{
"name": "High-level input voltage",
"symbol": "VIH",
"kind": "electrical",
"unit": "V",
"min": 2,
"typ": null,
"max": null,
"conditions": "(3.3V),max 为公式 VDDIO+0.3",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Low-level input voltage",
"symbol": "VIL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.8,
"conditions": "(3.3V),min 为公式 VSS-0.3",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Input hysteresis",
"symbol": "VHYSTERESIS",
"kind": "electrical",
"unit": "mV",
"min": 150,
"typ": null,
"max": null,
"conditions": "输入迟滞",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Input current with pulldown",
"symbol": "IPULLDOWN",
"kind": "electrical",
"unit": "µA",
"min": null,
"typ": 100,
"max": null,
"conditions": "带下拉的输入;VDDIO = 3.3V,VIN = VDDIO",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Input current with pullup, digital input",
"symbol": "IPULLUP",
"kind": "electrical",
"unit": "µA",
"min": null,
"typ": 160,
"max": null,
"conditions": "启用上拉的数字输入;VDDIO = 3.3V,VIN = 0V",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Input current with pullup, analog input",
"symbol": "IPULLUP",
"kind": "electrical",
"unit": "µA",
"min": null,
"typ": 160,
"max": null,
"conditions": "启用上拉的模拟输入;VDDA = 3.3V,VIN = 0V",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Pin leakage current, GPIO excluding GPIO23_VSW",
"symbol": "ILEAK",
"kind": "electrical",
"unit": "µA",
"min": null,
"typ": 2,
"max": null,
"conditions": "除 GPIO23_VSW 外的所有 GPIO 上拉和输出被禁用;0V ≤ VIN ≤ VDDIO",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Pin leakage current, GPIO23_VSW",
"symbol": "ILEAK",
"kind": "electrical",
"unit": "µA",
"min": null,
"typ": 45,
"max": null,
"conditions": "0V ≤ VIN ≤ VDDIO",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Pin leakage current, analog pins (excluding ADCINB3/VDAC and PGAx_OF)",
"symbol": "ILEAK",
"kind": "electrical",
"unit": "µA",
"min": null,
"typ": 0.1,
"max": null,
"conditions": "模拟驱动器禁用;0V ≤ VIN ≤ VDDA",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Input capacitance, digital GPIO excluding GPIO23_VSW",
"symbol": "CI",
"kind": "electrical",
"unit": "pF",
"min": null,
"typ": 2,
"max": null,
"conditions": "除 GPIO23_VSW 外的所有数字 GPIO",
"source_page": 68,
"source": "datasheet"
},
{
"name": "VDDIO power-on reset voltage",
"symbol": "VPOR-VDDIO",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": 2.3,
"max": null,
"conditions": "VDDIO 上电复位电压",
"source_page": 68,
"source": "datasheet"
},
{
"name": "VDDIO brown-out reset voltage",
"symbol": "VBOR-VDDIO",
"kind": "electrical",
"unit": "V",
"min": 2.81,
"typ": 3,
"max": null,
"conditions": "VDDIO 欠压复位电压",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Internal regulator output",
"symbol": "VVREG",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": 1.2,
"max": null,
"conditions": "内部 VREG 打开",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Crystal oscillator load capacitance",
"symbol": "CL1, CL2",
"kind": "electrical",
"unit": "pF",
"min": 12,
"typ": null,
"max": 24,
"conditions": "晶体振荡器负载电容",
"source_page": 94,
"source": "datasheet"
},
{
"name": "Crystal shunt capacitance",
"symbol": "C0",
"kind": "electrical",
"unit": "pF",
"min": null,
"typ": null,
"max": 7,
"conditions": "晶振并联电容",
"source_page": 94,
"source": "datasheet"
},
{
"name": "INTOSC1 and INTOSC2 frequency",
"symbol": "fINTOSC",
"kind": "electrical",
"unit": "MHz",
"min": 9.7,
"typ": 10,
"max": 10.3,
"conditions": "INTOSC1 和 INTOSC2",
"source_page": 95,
"source": "datasheet"
},
{
"name": "INTOSC frequency stability at room temperature",
"symbol": "fINTOSC-STABILITY",
"kind": "tolerance",
"unit": "%",
"min": -0.1,
"typ": null,
"max": 0.1,
"conditions": "30°C,标称 VDD",
"source_page": 96,
"source": "datasheet"
},
{
"name": "INTOSC frequency stability over VDD",
"symbol": "fINTOSC-STABILITY",
"kind": "tolerance",
"unit": "%",
"min": -0.2,
"typ": null,
"max": 0.2,
"conditions": "VDD 上的频率稳定性,30°C",
"source_page": 96,
"source": "datasheet"
},
{
"name": "INTOSC frequency stability over temperature",
"symbol": "fINTOSC-STABILITY",
"kind": "tolerance",
"unit": "%",
"min": -3,
"typ": null,
"max": 3,
"conditions": "频率稳定性",
"source_page": 96,
"source": "datasheet"
},
{
"name": "ESD human body model (HBM), all pins",
"symbol": "V(ESD)",
"kind": "absolute_maximum",
"unit": "V",
"min": -2000,
"typ": null,
"max": 2000,
"conditions": "64 引脚 PM 封装,Q 温度范围,符合 AEC Q100-002,所有引脚",
"source_page": 60,
"source": "datasheet"
},
{
"name": "ESD charged device model (CDM), all pins",
"symbol": "V(ESD)",
"kind": "absolute_maximum",
"unit": "V",
"min": -500,
"typ": null,
"max": 500,
"conditions": "64 引脚 PM 封装,Q 温度范围,符合 AEC Q100-011,所有引脚",
"source_page": 60,
"source": "datasheet"
},
{
"name": "ESD charged device model (CDM), corner pins",
"symbol": "V(ESD)",
"kind": "absolute_maximum",
"unit": "V",
"min": -750,
"typ": null,
"max": 750,
"conditions": "64 引脚 PM 上的转角引脚 1、16、17、32、33、48、49、64",
"source_page": 60,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"f280040cpmqr"
],
"discovery_pitch": "F280040CPMQR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"f280040cpmqr.kicad_sym",
"f280040cpmqr.kicad_mod",
"f280040cpmqr.glb",
"f280040cpmqr.step",
"f280040cpmqr.lbr",
"docs/hero.png",
"docs/f280040cpmqr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"f280040cpmqr-hero.glb",
"f280040cpmqr-hero.overlay.json",
"f280040cpmqr-etched.glb"
],
"visibility": {
"public": true
}
}