main
History Download
Ray Publish 0.1.0 920f406

F280039CPZQ1

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)

F280039CPZQ1 from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GPIO28 bidirectional General-purpose I/O GPIO28, default GPIO function, multiplexed with SCIA_RX, EPWM7_A and other peripheral signals (Table 5-6).
2 XRSn bidirectional Device reset input and watchdog reset output, open-drain with internal pull-up; requires a 2.2k to 10k resistor to VDDIO.
3 VDDIO power_in 3.3V digital I/O supply pin; connect all VDDIO pins together.
4 VDD power_in 1.2V digital logic supply pin, generated by internal VREG when VREGENZ is low.
5 VSS power_in Digital ground pin, connect to board ground.
6 GPIO47 bidirectional General-purpose I/O GPIO47, multiplexed with LINA_RX, MCAN_RX and PMBUSA_SCL.
7 GPIO48 bidirectional General-purpose I/O GPIO48, multiplexed with OUTPUTXBAR3, CANA_TX and SCIA_TX.
8 GPIO49 bidirectional General-purpose I/O GPIO49, multiplexed with OUTPUTXBAR4, CANA_RX and SCIA_RX.
9 GPIO50 bidirectional General-purpose I/O GPIO50, multiplexed with EQEP1_A, MCAN_TX and SPIB_SIMO.
10 GPIO51 bidirectional General-purpose I/O GPIO51, multiplexed with EQEP1_B, MCAN_RX and SPIB_SOMI.
11 GPIO52 bidirectional General-purpose I/O GPIO52, multiplexed with EQEP1_STROBE, CLB_OUTPUTXBAR5 and SPIB_CLK.
12 GPIO53 bidirectional General-purpose I/O GPIO53, multiplexed with EQEP1_INDEX, CLB_OUTPUTXBAR6 and SPIB_STE.
13 GPIO54 bidirectional General-purpose I/O GPIO54, multiplexed with SPIA_SIMO, EQEP2_A and OUTPUTXBAR2.
14 A6 passive ADC-A analog input 6, also CMPSS1 comparator input and AIO228 digital input.
15 B2/C6 passive ADC-B input 2 and ADC-C input 6, also CMPSS3 comparator input and AIO226 digital input.
16 B3/VDAC passive ADC-B input 3 with optional external reference input VDAC for the on-chip DACs, also CMPSS3 input and AIO242.
17 A2/B6/C9 passive ADC-A input 2, ADC-B input 6 and ADC-C input 9, also CMPSS1 comparator input and AIO224.
18 A3/B9/C7 passive ADC-A input 3, ADC-B input 9 and ADC-C input 7, also CMPSS3 comparator input.
19 A14/B14/C4 passive ADC-A input 14, ADC-B input 14 and ADC-C input 4, also CMPSS3 comparator input and AIO239.
20 A11/B10/C0 passive ADC-A input 11, ADC-B input 10 and ADC-C input 0, also CMPSS1 comparator input and AIO237.
21 B12/C2 passive ADC-B input 12 and ADC-C input 2, also CMPSS3 comparator input and AIO244.
22 A1/B7/DACB_OUT passive ADC-A input 1 and ADC-B input 7, also buffered DAC-B output and AIO232.
23 A0/B15/C15/DACA_OUT passive ADC-A input 0, ADC-B input 15 and ADC-C input 15, also buffered DAC-A output and AIO231.
24 VREFHI input ADC high reference voltage; place at least 2.2uF between VREFHI and VREFLO close to the device.
25 VREFHI input ADC high reference voltage (second pin); place at least 2.2uF between VREFHI and VREFLO close to the device.
26 VREFLO input ADC low reference voltage, bonded to VSSA.
27 VREFLO input ADC low reference voltage (second pin), bonded to VSSA.
28 A12/C5 passive ADC-A input 12 and ADC-C input 5, also CMPSS2 comparator input and AIO238.
29 C1 passive ADC-C input 1, also CMPSS4 comparator input and AIO248.
30 B11 passive ADC-B input 11, also CMPSS4 comparator input and AIO251 (dedicated pin on PZ package).
31 A7/C3 passive ADC-A input 7 and ADC-C input 3, also CMPSS4 comparator input and AIO245.
32 B5 passive ADC-B input 5, also CMPSS1 comparator input and AIO252 (dedicated pin on PZ package).
33 VSSA power_in Analog ground pin.
34 VDDA power_in 3.3V analog supply pin; place at least 2.2uF decoupling capacitor on this pin.
35 A5 passive ADC-A input 5, also CMPSS2 comparator input and AIO249 (dedicated pin on PZ package).
36 A4/B8 passive ADC-A input 4 and ADC-B input 8, also CMPSS2 comparator input and AIO225.
37 A8 passive ADC-A input 8, also CMPSS4 comparator input and AIO240 (dedicated pin on PZ package).
38 A9 passive ADC-A input 9, also CMPSS2 comparator input and AIO227.
39 B4/C8 passive ADC-B input 4 and ADC-C input 8, also CMPSS4 comparator input and AIO236.
40 A10/B1/C10 passive ADC-A input 10, ADC-B input 1 and ADC-C input 10, also CMPSS2 comparator inputs and AIO230.
41 B0/C11 passive ADC-B input 0 and ADC-C input 11, also CMPSS2 comparator input and AIO253.
42 C14 passive ADC-C input 14, also CMPSS4 comparator input and AIO247 (dedicated pin on PZ package).
43 GPIO55 bidirectional General-purpose I/O GPIO55, multiplexed with SPIA_SOMI, EQEP2_B and OUTPUTXBAR3.
44 GPIO60 bidirectional General-purpose I/O GPIO60, multiplexed with MCAN_TX, OUTPUTXBAR3 and SPIB_SIMO.
45 VSS power_in Digital ground pin, connect to board ground.
46 VDD power_in 1.2V digital logic supply pin.
47 VDDIO power_in 3.3V digital I/O supply pin.
48 B5/GPIO20 passive ADC-B input 5 and GPIO20, AGPIO-capable pin with digital input and output when configured (Section 5.4.3).
49 B11/GPIO21 passive ADC-B input 11 and GPIO21, AGPIO-capable pin with digital input and output when configured (Section 5.4.3).
50 GPIO13 bidirectional General-purpose I/O GPIO13, multiplexed with EPWM7_B, MCAN_TX and SCIB_RX.
51 GPIO12 bidirectional General-purpose I/O GPIO12, multiplexed with EPWM7_A, MCAN_RX and SCIB_TX.
52 GPIO11 bidirectional General-purpose I/O GPIO11, multiplexed with EPWM6_B, OUTPUTXBAR7 and SCIB_RX.
53 GPIO33 bidirectional General-purpose I/O GPIO33, multiplexed with I2CA_SCL, SPIB_STE and OUTPUTXBAR4.
54 GPIO16 bidirectional General-purpose I/O GPIO16, multiplexed with SPIA_SIMO, OUTPUTXBAR7 and EPWM5_A.
55 GPIO17 bidirectional General-purpose I/O GPIO17, multiplexed with SPIA_SOMI, OUTPUTXBAR8 and EPWM5_B.
56 GPIO24 bidirectional General-purpose I/O GPIO24, multiplexed with OUTPUTXBAR1, EQEP2_A and EPWM8_A.
57 GPIO25 bidirectional General-purpose I/O GPIO25, multiplexed with OUTPUTXBAR2, EQEP2_B and EQEP1_A.
58 GPIO26 bidirectional General-purpose I/O GPIO26, multiplexed with OUTPUTXBAR3, EQEP2_INDEX and SPIB_CLK.
59 GPIO27 bidirectional General-purpose I/O GPIO27, multiplexed with OUTPUTXBAR4, EQEP2_STROBE and SPIB_STE.
60 TCK input JTAG test clock input with internal pull-up enabled.
61 GPIO37/TDO bidirectional JTAG test data output TDO by default, alternate GPIO37; TDO is tri-stated when no JTAG activity and pull-up should be enabled or externally biased.
62 TMS bidirectional JTAG test mode select with internal pull-up; add external 2.2k pull-up to VDDIO per datasheet.
63 GPIO35/TDI bidirectional JTAG test data input TDI by default, alternate GPIO35; internal pull-up disabled by default, enable or add external pull-up.
64 GPIO32 bidirectional General-purpose I/O GPIO32, multiplexed with I2CA_SDA, SPIB_CLK and EPWM8_B.
65 GPIO56 bidirectional General-purpose I/O GPIO56, multiplexed with SPIA_CLK, CLB_OUTPUTXBAR7 and MCAN_TX.
66 GPIO57 bidirectional General-purpose I/O GPIO57, multiplexed with SPIA_STE, CLB_OUTPUTXBAR8 and MCAN_RX.
67 GPIO58 bidirectional General-purpose I/O GPIO58, multiplexed with OUTPUTXBAR1, SPIB_CLK and LINA_TX.
68 GPIO18/X2 bidirectional General-purpose I/O GPIO18 or crystal oscillator output X2 when XTAL is enabled.
69 GPIO19/X1 bidirectional General-purpose I/O GPIO19 or crystal/single-ended clock input X1; must be configured by software before enabling the crystal oscillator.
70 VDDIO power_in 3.3V digital I/O supply pin.
71 VDD power_in 1.2V digital logic supply pin.
72 VSS power_in Digital ground pin.
73 VREGENZ input Internal regulator enable; connect low to VSS to enable internal VREG, high to VDDIO for external VDD supply.
74 GPIO8 bidirectional General-purpose I/O GPIO8, multiplexed with EPWM5_A, ADCSOCAO, SCIA_TX and I2CA_SCL.
75 GPIO4 bidirectional General-purpose I/O GPIO4, multiplexed with EPWM3_A, MCAN_TX, CANA_TX and SPIB_CLK.
76 GPIO3 bidirectional General-purpose I/O GPIO3, multiplexed with EPWM2_B, OUTPUTXBAR2, SPIA_CLK and SCIA_RX.
77 GPIO2 bidirectional General-purpose I/O GPIO2, multiplexed with EPWM2_A, OUTPUTXBAR1, SPIA_SIMO and SCIA_TX.
78 GPIO1 bidirectional General-purpose I/O GPIO1, multiplexed with EPWM1_B, I2CA_SCL, SPIA_SOMI and MCAN_TX.
79 GPIO0 bidirectional General-purpose I/O GPIO0, multiplexed with EPWM1_A, I2CA_SDA, SPIA_STE and MCAN_RX.
80 GPIO40 bidirectional General-purpose I/O GPIO40, multiplexed with SPIB_SIMO, EPWM2_B, PMBUSA_SDA and SCIB_TX.
81 GPIO23 bidirectional General-purpose I/O GPIO23, multiplexed with EQEP1_INDEX, SCIB_RX, SPIB_STE and LINA_RX.
82 GPIO41 bidirectional General-purpose I/O GPIO41, multiplexed with EPWM2_A, PMBUSA_SCL, FSIRXA_D1 and SCIB_RX.
83 GPIO22 bidirectional General-purpose I/O GPIO22, multiplexed with EQEP1_STROBE, SCIB_TX, SPIB_CLK and LINA_TX.
84 GPIO7 bidirectional General-purpose I/O GPIO7, multiplexed with EPWM4_B, OUTPUTXBAR5, EQEP1_B and SPIB_SIMO.
85 GPIO44 bidirectional General-purpose I/O GPIO44, multiplexed with OUTPUTXBAR7, EQEP1_A, PMBUSA_SDA and FSITXA_CLK.
86 VSS power_in Digital ground pin.
87 VDD power_in 1.2V digital logic supply pin.
88 VDDIO power_in 3.3V digital I/O supply pin.
89 GPIO5 bidirectional General-purpose I/O GPIO5, multiplexed with EPWM3_B, OUTPUTXBAR3, MCAN_RX and CANA_RX.
90 GPIO9 bidirectional General-purpose I/O GPIO9, multiplexed with EPWM5_B, SCIB_TX, OUTPUTXBAR6 and EQEP1_INDEX.
91 GPIO61 bidirectional General-purpose I/O GPIO61, multiplexed with MCAN_RX, OUTPUTXBAR4, SPIB_SOMI and CANA_RX.
92 GPIO59 bidirectional General-purpose I/O GPIO59, multiplexed with OUTPUTXBAR2, SPIB_STE, LINA_RX and CANA_RX.
93 GPIO10 bidirectional General-purpose I/O GPIO10, multiplexed with EPWM6_A, ADCSOCBO, EQEP1_A and SCIB_TX.
94 GPIO34 bidirectional General-purpose I/O GPIO34, multiplexed with OUTPUTXBAR1, PMBUSA_SDA, HIC_NBE1 and I2CB_SDA.
95 GPIO15 bidirectional General-purpose I/O GPIO15, multiplexed with EPWM8_B, SCIB_RX, I2CB_SCL and OUTPUTXBAR4.
96 GPIO14 bidirectional General-purpose I/O GPIO14, multiplexed with EPWM8_A, SCIB_TX, I2CB_SDA and OUTPUTXBAR3.
97 GPIO6 bidirectional General-purpose I/O GPIO6, multiplexed with EPWM4_A, OUTPUTXBAR4, SYNCOUT and EQEP1_A.
98 GPIO30 bidirectional General-purpose I/O GPIO30, multiplexed with CANA_RX, SPIB_SIMO, OUTPUTXBAR7 and EPWM1_A.
99 GPIO31 bidirectional General-purpose I/O GPIO31, multiplexed with CANA_TX, SPIB_SOMI, OUTPUTXBAR8 and EPWM1_B.
100 GPIO29 bidirectional General-purpose I/O GPIO29, multiplexed with SCIA_TX, EPWM7_B, OUTPUTXBAR6 and AUXCLKIN.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
高电平输入电压 VIH 2 V 71
低电平输入电压 VIL 0.8 V 71
低电平输出电压 VOL 0.4 V IOL=IOL 最大值 71
高电平输出阻抗 ROH 50 66 96 Ω VOH=VDDIO-0.4V 71
低电平输出阻抗 ROL 48 60 84 Ω VOL = 0.4V 71
弱下拉电阻 RPULLDOWN 22 31 62 kΩ 71
弱上拉电阻 RPULLUP 19 30 54 kΩ 71
内部稳压器输出 VVREG 1.14 1.2 1.32 V 83
内部稳压器浪涌电流 VVREG-INRUSH 650 mA 83
斜降时的 VDDIO 欠压复位电压 VBOR-VDDIO-DN 2.81 3 V XRSn 释放之后 83
3.3V 电源轨 (VDDIO) 的电源斜升速率 SRVDDIO-UP 8 100 mV/μs 83
3.3V 电源轨 (VDDIO) 的电源斜降速率 SRVDDIO-DN 20 100 mV/μs 83
总 VDD 电容 CVDD TOTAL 10 26.8 μF 内部 VREG 83
比较器输入范围 CMPINxx 0 V 比较器输入 (CMPINxx) 范围 141
以输入为基准的失调电压误差 -20 20 mV 低共模,反相输入设置为 50mV 141
CMPSS DAC 静态失调电压误差 -25 25 mV 142
CMPSS DAC 静态增益误差 -2 2 FSR 百分比 142
CMPSS DAC 静态 DNL -1 4 LSB 已更正端点 142
CMPSS DAC 静态 INL -16 16 LSB 已更正端点 142
VDAC 基准电压 VDAC 2.4 3 V 当 VDAC 为基准时 142
VDAC 负载 VDAC 6 10 kΩ 当 VDAC 为基准时 142
缓冲 DAC 容性负载 CL 100 pF 容性负载 146
缓冲 DAC 有效输出电压范围 VOUT 0.3 V RL = 5kΩ 146
缓冲 DAC 有效输出电压范围 VOUT 0.6 V RL = 1kΩ 146
缓冲 DAC 基准电压 VDAC/VREFHI 2.4 3 V VDAC 或 VREFHI 146
基准输入电阻 160 200 240 kΩ VDAC 或 VREFHI 146
缓冲 DAC 负载调整率 -1 1 mV/V 146
缓冲 DAC 电压输出压摆率 2.8 4.5 V/µs 从 0.3V 到 3V 转换的压摆率 146
缓冲 DAC 偏移量误差 -10 10 mV 中点 146
缓冲 DAC 增益误差 -2.5 2.5 FSR 百分比 146
缓冲 DAC 微分非线性 DNL -1 1 LSB 已更正端点 146
缓冲 DAC 积分非线性 INL -5 5 LSB 已更正端点 146
PMBus 低电平输出电压 VOL 0.4 V 在 Ipullup = 4mA 时 171
PMBus 快速模式 SCL 时钟频率 fSCL 10 400 kHz PMBus 快速模式 171
PMBus 标准模式 SCL 时钟频率 fSCL 10 100 kHz PMBus 标准模式 172
晶体负载电容 CL1、CL2 12 24 pF 98
晶振并联电容 C0 7 pF 晶振并联电容 98
fINTOSC 频率 INTOSC1 和 INTOSC2 fINTOSC 9.82 10 10.1 MHz -40℃ 至 125℃ 100
fINTOSC 频率 INTOSC1 和 INTOSC2 fINTOSC 9.86 10 10.1 MHz -30℃ 至 90℃ 100
fINTOSC 频率 INTOSC1 和 INTOSC2 fINTOSC 9.9 10 10.1 MHz -10℃ 至 85℃ 100
室温下的频率稳定性 fINTOSC-STABILITY -0.1 0.1 % 30°C,标称 VDD 100
PZ 结至外壳热阻 RΘJC 7.6 °C/W 72
PZ 结至电路板热阻 RΘJB 24.2 °C/W 72
PZ 结至大气热阻(高 k PCB) RΘJA 46.1 °C/W 0 lfm 72
PZ 结至流动空气热阻 RΘJMA 37.3 °C/W 150 lfm 72
PZ 结至流动空气热阻 RΘJMA 34.8 °C/W 250 lfm 72
PZ 结至流动空气热阻 RΘJMA 32.6 °C/W 500 lfm 72
PZ 结至封装顶部 PsiJT 0.2 °C/W 0 lfm 72
PZ 结至电路板 PsiJB 23.8 °C/W 0 lfm 72
数字输入电容 CI 2 pF 数字输入 71
输入迟滞 VHYSTERESIS 125 mV 71
VDDIO 上电复位电压 VPOR-VDDIO 2.3 V XRSn 释放之前和之后 83
斜升时的 VDDIO 欠压复位电压 VBOR-VDDIO-UP 2.7 V XRSn 释放之前 83
VDDIO 监视器路径中的总延迟 VDDIO-MON-TOT-DELAY 145 μs 84
上电期间电源斜升后的 XRSn 释放延迟 VXRSn-PU-DELAY 40 μs 这是最后的延迟 84
晶振启动时间 4 ms f = 10MHz,ESR 最大值 = 110Ω,CL1 = CL2 = 24pF,C0 = 7pF 99
晶振驱动电平 DL 1 mW 99

CAD (KiCad official)

  • Symbol: F280039CPZQ1
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: f280039cpzq1-etched.step / f280039cpzq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); f280039cpzq1.step / f280039cpzq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (285 pp, sha256 4385cb7a74ef5d7f, retrieved 2026-11-05, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF