component
F280025PMQR
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
7dbc241
F280025PMQR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
F280025PMQR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO29 | bidirectional | General-purpose I/O 29 with mux options such as SCIA_TX, EPWM7_B, EQEP1_B, ERRORSTS, I2CB_SCL and HIC_NCS. |
| 2 | GPIO28 | bidirectional | General-purpose I/O 28 with mux options such as SCIA_RX, EPWM7_A, LINA_TX, ERRORSTS, I2CB_SDA and HIC_NOE. |
| 3 | XRSn | bidirectional | Device reset input and watchdog reset output (open-drain with internal pull-up); place 2.2kΩ to 10kΩ to VDDIO and at most 100nF to VSS. |
| 4 | VDD | power_in | 1.2V digital logic supply pin, needs decoupling for the internal VREG. |
| 5 | VSS | power_in | Digital ground. |
| 6 | A6 | input | Analog input A6 (also CMP1_HP2/LP2, AIO228, HIC_A0). |
| 7 | C6 | input | Analog input C6 (also CMP3_HP0/LP0, AIO226, HIC_A1). |
| 8 | A3,C5,VDAC | input | ADC-A input 3 / ADC-C input 5 / optional external CMPSS DAC reference; has a non-disableable internal capacitor to VSSA, use at least 1µF when used as VDAC reference. |
| 9 | A2,C9 | input | ADC-A input 2 / ADC-C input 9 (also CMP1_HP0/LP0, AIO224, HIC_A3). |
| 10 | A15,C7 | input | ADC-A input 15 / ADC-C input 7 (also CMP1 inputs, AIO233, HIC_A4). |
| 11 | A14,C4 | input | ADC-A input 14 / ADC-C input 4 (also CMP3_HP4/LP4, AIO239, HIC_A5). |
| 12 | A11,C0 | input | ADC-A input 11 / ADC-C input 0 (also CMP1 inputs, AIO237, HIC_A6). |
| 13 | A5,C2 | input | ADC-A input 5 / ADC-C input 2 (also CMP3 inputs, AIO244, HIC_A7). |
| 14 | A1 | input | Analog input A1 (also CMP1_HP4/LP4, AIO232, HIC_BASESEL0). |
| 15 | A0,C15 | input | ADC-A input 0 / ADC-C input 15 (also CMP3_HP2/LP2, AIO231, HIC_BASESEL1). |
| 16 | VREFHI | input | ADC high reference voltage, driven externally or by the device; place at least a 2.2µF capacitor between VREFHI and VREFLO. |
| 17 | VREFLO | input | ADC low reference voltage. |
| 18 | A12,C1 | input | ADC-A input 12 / ADC-C input 1 (also CMP2/CMP4 inputs, AIO238, HIC_NCS). |
| 19 | A7,C3 | input | ADC-A input 7 / ADC-C input 3 (also CMP4 inputs, AIO245, HIC_NOE). |
| 20 | A8,C11 | input | ADC-A input 8 / ADC-C input 11 (also CMP2/CMP4 inputs, AIO241, HIC_NBE1). |
| 21 | VSSA | power_in | Analog ground. |
| 22 | VDDA | power_in | 3.3V analog supply pin; place at least a 2.2µF decoupling capacitor on each pin. |
| 23 | A4,C14 | input | ADC-A input 4 / ADC-C input 14 (also CMP2/CMP4 inputs, AIO225, HIC_NWE). |
| 24 | A9,C8 | input | ADC-A input 9 / ADC-C input 8 (also CMP2/CMP4 inputs, AIO227, HIC_NBE0). |
| 25 | A10,C10 | input | ADC-A input 10 / ADC-C input 10 (also CMP2 inputs, AIO230, HIC_BASESEL2). |
| 26 | VSS | power_in | Digital ground. |
| 27 | VDD | power_in | 1.2V digital logic supply pin, needs decoupling for the internal VREG. |
| 28 | VDDIO | power_in | 3.3V digital I/O supply pin. |
| 29 | GPIO13 | bidirectional | General-purpose I/O 13 with mux options such as EPWM7_B, EQEP1_INDEX, PMBUSA_ALERT, FSIRXA_CLK, LINB_RX and SPIA_SOMI. |
| 30 | GPIO12 | bidirectional | General-purpose I/O 12 with mux options such as EPWM7_A, EQEP1_STROBE, PMBUSA_CTL, FSIRXA_D0, LINB_TX and HIC_INT. |
| 31 | GPIO11 | bidirectional | General-purpose I/O 11 with mux options such as EPWM6_B, OUTPUTXBAR7, EQEP1_B, SPIA_STE and HIC_NBE0. |
| 32 | GPIO33 | bidirectional | General-purpose I/O 33 with mux options such as I2CA_SCL, SPIB_STE, LINA_RX, CANA_RX, ADCSOCAO and HIC_D0. |
| 33 | GPIO16 | bidirectional | General-purpose I/O 16 with mux options such as SPIA_SIMO, EPWM5_A, SCIA_TX, XCLKOUT and SPIB_SOMI. |
| 34 | GPIO17 | bidirectional | General-purpose I/O 17 with mux options such as SPIA_SOMI, EPWM5_B, SCIA_RX, PMBUSA_SDA and CANA_TX. |
| 35 | GPIO24 | bidirectional | General-purpose I/O 24 (default boot-mode select pin 1) with mux options such as OUTPUTXBAR1, EQEP2_A, SPIB_SIMO and ERRORSTS. |
| 36 | TCK | input | JTAG test clock with internal pull-up. |
| 37 | GPIO37/TDO | bidirectional | GPIO37 with default JTAG TDO function; tri-stated when no JTAG activity, so enable internal pull-up or add an external pull-up. |
| 38 | TMS | bidirectional | JTAG test mode select with internal pull-up; add an external pull-up (2.2kΩ recommended) to VDDIO; no TRSTn pin exists. |
| 39 | GPIO35/TDI | bidirectional | GPIO35 with default JTAG TDI function; internal pull-up disabled by default, enable it or add an external pull-up to avoid floating input. |
| 40 | GPIO32 | bidirectional | General-purpose I/O 32 (default boot-mode select pin 0) with mux options such as I2CA_SDA, SPIB_CLK, LINA_TX and HIC_INT. |
| 41 | GPIO18_X2 | bidirectional | General-purpose I/O 18 or crystal oscillator output X2 (ALT function), with SPIA_CLK, CANA_RX, XCLKOUT and other mux options. |
| 42 | GPIO19_X1 | bidirectional | General-purpose I/O 19 or crystal oscillator / single-ended 3.3V clock input X1 (ALT function), with SPIA_STE, CANA_TX and other mux options. |
| 43 | VDDIO | power_in | 3.3V digital I/O supply pin. |
| 44 | VDD | power_in | 1.2V digital logic supply pin, needs decoupling for the internal VREG. |
| 45 | VSS | power_in | Digital ground. |
| 46 | GPIO39 | bidirectional | General-purpose I/O 39 with mux options such as FSIRXA_CLK, EQEP2_INDEX, CLB_OUTPUTXBAR2, SYNCOUT and HIC_D7. |
| 47 | GPIO8 | bidirectional | General-purpose I/O 8 with mux options such as EPWM5_A, ADCSOCAO, SCIA_TX, SPIA_SIMO, I2CA_SCL and HIC_D8. |
| 48 | GPIO4 | bidirectional | General-purpose I/O 4 with mux options such as EPWM3_A, OUTPUTXBAR3, CANA_TX, SPIB_CLK and HIC_NWE. |
| 49 | GPIO3 | bidirectional | General-purpose I/O 3 with mux options such as EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL, SPIA_CLK, SCIA_RX and CANA_RX. |
| 50 | GPIO2 | bidirectional | General-purpose I/O 2 with mux options such as EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA, SPIA_SIMO, SCIA_TX and CANA_TX. |
| 51 | GPIO1 | bidirectional | General-purpose I/O 1 with mux options such as EPWM1_B, I2CA_SCL, SPIA_SOMI and HIC_A2. |
| 52 | GPIO0 | bidirectional | General-purpose I/O 0 with mux options such as EPWM1_A, I2CA_SDA, SPIA_STE and FSIRXA_CLK. |
| 53 | GPIO40 | bidirectional | General-purpose I/O 40 with mux options such as SPIB_SIMO, EPWM2_B, PMBUSA_SDA, FSIRXA_D0 and LINB_TX. |
| 54 | GPIO23 | bidirectional | General-purpose I/O 23 with mux options such as EQEP1_INDEX, SPIB_STE, LINA_RX, LINB_RX and EPWM4_B. |
| 55 | GPIO41 | bidirectional | General-purpose I/O 41 with mux options such as EPWM2_A, PMBUSA_SCL, FSIRXA_D1, EQEP1_B and LINB_RX. |
| 56 | GPIO22 | bidirectional | General-purpose I/O 22 with mux options such as EQEP1_STROBE, SPIB_CLK, LINA_TX and EPWM4_A. |
| 57 | GPIO7 | bidirectional | General-purpose I/O 7 with mux options such as EPWM4_B, OUTPUTXBAR5, EQEP1_B, SPIB_SIMO and FSITXA_CLK. |
| 58 | VSS | power_in | Digital ground. |
| 59 | VDD | power_in | 1.2V digital logic supply pin, needs decoupling for the internal VREG. |
| 60 | VDDIO | power_in | 3.3V digital I/O supply pin. |
| 61 | GPIO5 | bidirectional | General-purpose I/O 5 with mux options such as EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE and FSITXA_D1. |
| 62 | GPIO9 | bidirectional | General-purpose I/O 9 with mux options such as EPWM5_B, OUTPUTXBAR6, EQEP1_INDEX, SCIA_RX and SPIA_CLK. |
| 63 | GPIO10 | bidirectional | General-purpose I/O 10 with mux options such as EPWM6_A, ADCSOCBO, EQEP1_A, SPIA_SOMI and I2CA_SDA. |
| 64 | GPIO6 | bidirectional | General-purpose I/O 6 with mux options such as EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A and SPIB_SOMI. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 VDDIO 以 VSS 为基准 | VDDIO | -0.3 | 4.6 | V | 以 VSS 为基准 | 51 | |
| 电源电压 VDDA 以 VSSA 为基准 | VDDA | -0.3 | 4.6 | V | 以 VSSA 为基准 | 51 | |
| 输入电压 | VIN | -0.3 | 4.6 | V | 3.3V 输入电压 | 51 | |
| 输出电压 | VO | -0.3 | 4.6 | V | 51 | ||
| 输入钳位电流 每个引脚 | IIK | -20 | 20 | mA | VIN < VSS/VSSA 或 VIN > VDDIO/VDDA | 51 | |
| 输入钳位电流 所有输入总计 | IIKTOTAL | -20 | 20 | mA | VIN < VSS/VSSA 或 VIN > VDDIO/VDDA | 51 | |
| 输出电流 数字输出每引脚 | IOUT | -20 | 20 | mA | 数字输出(每引脚) | 51 | |
| 自然通风工作温度 | TA | -40 | 125 | °C | 自然通风 | 51 | |
| 工作结温 | TJ | -40 | 150 | °C | 51 | ||
| 贮存温度 | Tstg | -65 | 150 | °C | 51 | ||
| 器件电源电压 VDDIO 和 VDDA 启用内部 BOR | VDDIO, VDDA | 3.3 | 3.63 | V | 启用内部 BOR | 52 | |
| 器件电源电压 VDDIO 和 VDDA 禁用内部 BOR | VDDIO, VDDA | 2.8 | 3.3 | 3.63 | V | 禁用内部 BOR | 52 |
| 结温 | TJ | -40 | 145 | °C | 52 | ||
| 自然通风温度 | TA | -40 | 125 | °C | 52 | ||
| 输出低电平电压 | VOL | 0.4 | V | IOL = IOL 最大值 | 58 | ||
| 输出低电平电压 | VOL | 0.2 | V | IOL = 100µA | 58 | ||
| 所有输出引脚的高电平输出阻抗 | ROH | 45 | 65 | 100 | Ω | 58 | |
| 所有输出引脚的低电平输出阻抗 | ROL | 45 | 60 | 90 | Ω | 58 | |
| 高电平输入电压 | VIH | 2 | V | 58 | |||
| 低电平输入电压 | VIL | 0.8 | V | 58 | |||
| 内部稳压器输出 | VVREG | 1.14 | 1.2 | 1.32 | V | 58 | |
| VDDIO 欠压复位电压 | VBOR-VDDIO | 2.81 | 3 | V | 58 | ||
| 输入迟滞 | VHYSTERESIS | 125 | mV | 58 | |||
| IDDIO 运行期间的 VDDIO 电流消耗 | IDDIO | 35 | 72 | mA | 典型重负载应用,典型值 Vnom 30°C | 54 | |
| IDDA 运行期间的 VDDA 电流消耗 | IDDA | 3 | 5 | mA | 典型值 Vnom 30°C | 54 | |
| 空闲模式 VDDIO 电流消耗 | IDDIO | 16 | 33 | mA | CPU 处于空闲模式,闪存断电,XCLKOUT 关闭,为 IO 引脚启用上拉 | 54 | |
| 空闲模式 VDDA 电流消耗 | IDDA | 0.01 | 0.1 | mA | 器件处于空闲模式 | 54 | |
| 待机模式 VDDIO 电流消耗 | IDDIO | 8 | 22 | mA | CPU 处于待机模式,闪存断电,XCLKOUT 关闭,为 IO 引脚启用上拉 | 54 | |
| 待机模式 VDDA 电流消耗 | IDDA | 0.01 | 0.1 | mA | 器件处于待机模式 | 54 | |
| 停机模式 VDDIO 电流消耗 | IDDIO | 1 | 16 | mA | CPU 处于停机模式,闪存断电,XCLKOUT 关闭,为 IO 引脚启用上拉 | 54 | |
| 闪存擦除/编程 VDDIO 电流消耗 | IDDIO | 72 | 106 | mA | CPU 从 RAM 运行,100MHz SYSCLK,外设时钟关闭 | 54 | |
| 闪存擦除/编程 VDDA 电流消耗 | IDDA | 0.1 | 2.5 | mA | 擦除/编程周期期间 | 54 | |
| 复位模式 VDDIO 电流消耗 | IDDIO | 8.6 | mA | 复位激活(XRSn 为低电平) | 54 | ||
| 复位模式 VDDA 电流消耗 | IDDA | 0.1 | mA | 复位激活(XRSn 为低电平) | 54 | ||
| 结至外壳热阻 PM 封装 | RΘJC | 12.4 | °C/W | 59 | |||
| 结至电路板热阻 PM 封装 | RΘJB | 25.6 | °C/W | 59 | |||
| 结至大气热阻 PM 封装 高 k PCB | RΘJA | 51.8 | °C/W | 0 lfm | 59 | ||
| 结至流动空气热阻 PM 封装 | RΘJMA | 36.5 | °C/W | 500 lfm | 59 | ||
| 结至封装顶部 PM 封装 | PsiJT | 0.5 | °C/W | 0 lfm | 59 | ||
| ADCCLK 时钟频率 | ADCCLK | 5 | 50 | MHz | 源自 PERx.SYSCLK | 111 | |
| ADC 采样速率 | 3.45 | MSPS | 100MHz SYSCLK | 111 | |||
| ADC 外部基准电压 VREFHI 最小值 | VREFHI | 2.4 | V | 外部基准,最大值为 VDDA | 111 | ||
| ADC 内部基准 3.3V 范围转换范围 | 0 | 3.3 | V | 内部基准电压 = 3.3V 范围 | 111 | ||
| ADC 偏移量误差 | -5 | 5 | LSB | 112 | |||
| ADC 外部基准增益误差 | -5 | 5 | LSB | 外部基准 | 112 | ||
| ADC INL 误差 | -2 | 2 | LSB | 112 | |||
| ADC DNL 误差 | -1 | 1 | LSB | 112 | |||
| 比较器以输入为基准的失调电压误差 | -20 | 20 | mV | 低共模,反相输入设置为 50mV | 119 | ||
| 比较器迟滞 1x | 4 | 12 | 20 | LSB | 1x | 119 | |
| 比较器 PSRR 电源抑制比 | 46 | dB | 高达 250kHz | 119 | |||
| 比较器 CMRR 共模抑制比 | 40 | dB | 119 | ||||
| CMPSS DAC 静态失调电压误差 | -25 | 25 | mV | 包含以比较器输入为基准的误差 | 120 | ||
| CMPSS DAC 静态增益误差 | -2 | 2 | FSR 百分比 | 包含以比较器输入为基准的误差 | 120 | ||
| PMBus 有效低电平输入电压 | VIL | 0.8 | V | 145 | |||
| PMBus 有效高电平输入电压 | VIH | 2.1 | V | 145 | |||
| PMBus 低电平输出电压 | VOL | 0.4 | V | 在 Ipullup = 4mA 时 | 145 | ||
| PMBus 低电平输出电流 | IOL | 4 | mA | VOL ≤ 0.4V | 145 | ||
| PMBus 快速模式 SCL 时钟频率 | fSCL | 10 | 400 | kHz | 145 | ||
| PMBus 快速模式 时钟低超时 | tTimeout | 25 | 35 | ms | 145 | ||
| PMBus 标准模式 SCL 时钟频率 | fSCL | 10 | 100 | kHz | 146 | ||
| PMBus 标准模式 SDA 和 SCL 上升时间 | tr | 1000 | ns | 146 |
CAD (KiCad official)
- Symbol:
F280025PMQR - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
f280025pmqr-etched.step/f280025pmqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);f280025pmqr.step/f280025pmqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (245 pp, sha256
0723d8e3e09e1f8b, retrieved 2026-11-06, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# F280025PMQR
**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
F280025PMQR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO29 | bidirectional | General-purpose I/O 29 with mux options such as SCIA_TX, EPWM7_B, EQEP1_B, ERRORSTS, I2CB_SCL and HIC_NCS. |
| 2 | GPIO28 | bidirectional | General-purpose I/O 28 with mux options such as SCIA_RX, EPWM7_A, LINA_TX, ERRORSTS, I2CB_SDA and HIC_NOE. |
| 3 | XRSn | bidirectional | Device reset input and watchdog reset output (open-drain with internal pull-up); place 2.2kΩ to 10kΩ to VDDIO and at most 100nF to VSS. |
| 4 | VDD | power_in | 1.2V digital logic supply pin, needs decoupling for the internal VREG. |
| 5 | VSS | power_in | Digital ground. |
| 6 | A6 | input | Analog input A6 (also CMP1_HP2/LP2, AIO228, HIC_A0). |
| 7 | C6 | input | Analog input C6 (also CMP3_HP0/LP0, AIO226, HIC_A1). |
| 8 | A3,C5,VDAC | input | ADC-A input 3 / ADC-C input 5 / optional external CMPSS DAC reference; has a non-disableable internal capacitor to VSSA, use at least 1µF when used as VDAC reference. |
| 9 | A2,C9 | input | ADC-A input 2 / ADC-C input 9 (also CMP1_HP0/LP0, AIO224, HIC_A3). |
| 10 | A15,C7 | input | ADC-A input 15 / ADC-C input 7 (also CMP1 inputs, AIO233, HIC_A4). |
| 11 | A14,C4 | input | ADC-A input 14 / ADC-C input 4 (also CMP3_HP4/LP4, AIO239, HIC_A5). |
| 12 | A11,C0 | input | ADC-A input 11 / ADC-C input 0 (also CMP1 inputs, AIO237, HIC_A6). |
| 13 | A5,C2 | input | ADC-A input 5 / ADC-C input 2 (also CMP3 inputs, AIO244, HIC_A7). |
| 14 | A1 | input | Analog input A1 (also CMP1_HP4/LP4, AIO232, HIC_BASESEL0). |
| 15 | A0,C15 | input | ADC-A input 0 / ADC-C input 15 (also CMP3_HP2/LP2, AIO231, HIC_BASESEL1). |
| 16 | VREFHI | input | ADC high reference voltage, driven externally or by the device; place at least a 2.2µF capacitor between VREFHI and VREFLO. |
| 17 | VREFLO | input | ADC low reference voltage. |
| 18 | A12,C1 | input | ADC-A input 12 / ADC-C input 1 (also CMP2/CMP4 inputs, AIO238, HIC_NCS). |
| 19 | A7,C3 | input | ADC-A input 7 / ADC-C input 3 (also CMP4 inputs, AIO245, HIC_NOE). |
| 20 | A8,C11 | input | ADC-A input 8 / ADC-C input 11 (also CMP2/CMP4 inputs, AIO241, HIC_NBE1). |
| 21 | VSSA | power_in | Analog ground. |
| 22 | VDDA | power_in | 3.3V analog supply pin; place at least a 2.2µF decoupling capacitor on each pin. |
| 23 | A4,C14 | input | ADC-A input 4 / ADC-C input 14 (also CMP2/CMP4 inputs, AIO225, HIC_NWE). |
| 24 | A9,C8 | input | ADC-A input 9 / ADC-C input 8 (also CMP2/CMP4 inputs, AIO227, HIC_NBE0). |
| 25 | A10,C10 | input | ADC-A input 10 / ADC-C input 10 (also CMP2 inputs, AIO230, HIC_BASESEL2). |
| 26 | VSS | power_in | Digital ground. |
| 27 | VDD | power_in | 1.2V digital logic supply pin, needs decoupling for the internal VREG. |
| 28 | VDDIO | power_in | 3.3V digital I/O supply pin. |
| 29 | GPIO13 | bidirectional | General-purpose I/O 13 with mux options such as EPWM7_B, EQEP1_INDEX, PMBUSA_ALERT, FSIRXA_CLK, LINB_RX and SPIA_SOMI. |
| 30 | GPIO12 | bidirectional | General-purpose I/O 12 with mux options such as EPWM7_A, EQEP1_STROBE, PMBUSA_CTL, FSIRXA_D0, LINB_TX and HIC_INT. |
| 31 | GPIO11 | bidirectional | General-purpose I/O 11 with mux options such as EPWM6_B, OUTPUTXBAR7, EQEP1_B, SPIA_STE and HIC_NBE0. |
| 32 | GPIO33 | bidirectional | General-purpose I/O 33 with mux options such as I2CA_SCL, SPIB_STE, LINA_RX, CANA_RX, ADCSOCAO and HIC_D0. |
| 33 | GPIO16 | bidirectional | General-purpose I/O 16 with mux options such as SPIA_SIMO, EPWM5_A, SCIA_TX, XCLKOUT and SPIB_SOMI. |
| 34 | GPIO17 | bidirectional | General-purpose I/O 17 with mux options such as SPIA_SOMI, EPWM5_B, SCIA_RX, PMBUSA_SDA and CANA_TX. |
| 35 | GPIO24 | bidirectional | General-purpose I/O 24 (default boot-mode select pin 1) with mux options such as OUTPUTXBAR1, EQEP2_A, SPIB_SIMO and ERRORSTS. |
| 36 | TCK | input | JTAG test clock with internal pull-up. |
| 37 | GPIO37/TDO | bidirectional | GPIO37 with default JTAG TDO function; tri-stated when no JTAG activity, so enable internal pull-up or add an external pull-up. |
| 38 | TMS | bidirectional | JTAG test mode select with internal pull-up; add an external pull-up (2.2kΩ recommended) to VDDIO; no TRSTn pin exists. |
| 39 | GPIO35/TDI | bidirectional | GPIO35 with default JTAG TDI function; internal pull-up disabled by default, enable it or add an external pull-up to avoid floating input. |
| 40 | GPIO32 | bidirectional | General-purpose I/O 32 (default boot-mode select pin 0) with mux options such as I2CA_SDA, SPIB_CLK, LINA_TX and HIC_INT. |
| 41 | GPIO18_X2 | bidirectional | General-purpose I/O 18 or crystal oscillator output X2 (ALT function), with SPIA_CLK, CANA_RX, XCLKOUT and other mux options. |
| 42 | GPIO19_X1 | bidirectional | General-purpose I/O 19 or crystal oscillator / single-ended 3.3V clock input X1 (ALT function), with SPIA_STE, CANA_TX and other mux options. |
| 43 | VDDIO | power_in | 3.3V digital I/O supply pin. |
| 44 | VDD | power_in | 1.2V digital logic supply pin, needs decoupling for the internal VREG. |
| 45 | VSS | power_in | Digital ground. |
| 46 | GPIO39 | bidirectional | General-purpose I/O 39 with mux options such as FSIRXA_CLK, EQEP2_INDEX, CLB_OUTPUTXBAR2, SYNCOUT and HIC_D7. |
| 47 | GPIO8 | bidirectional | General-purpose I/O 8 with mux options such as EPWM5_A, ADCSOCAO, SCIA_TX, SPIA_SIMO, I2CA_SCL and HIC_D8. |
| 48 | GPIO4 | bidirectional | General-purpose I/O 4 with mux options such as EPWM3_A, OUTPUTXBAR3, CANA_TX, SPIB_CLK and HIC_NWE. |
| 49 | GPIO3 | bidirectional | General-purpose I/O 3 with mux options such as EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL, SPIA_CLK, SCIA_RX and CANA_RX. |
| 50 | GPIO2 | bidirectional | General-purpose I/O 2 with mux options such as EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA, SPIA_SIMO, SCIA_TX and CANA_TX. |
| 51 | GPIO1 | bidirectional | General-purpose I/O 1 with mux options such as EPWM1_B, I2CA_SCL, SPIA_SOMI and HIC_A2. |
| 52 | GPIO0 | bidirectional | General-purpose I/O 0 with mux options such as EPWM1_A, I2CA_SDA, SPIA_STE and FSIRXA_CLK. |
| 53 | GPIO40 | bidirectional | General-purpose I/O 40 with mux options such as SPIB_SIMO, EPWM2_B, PMBUSA_SDA, FSIRXA_D0 and LINB_TX. |
| 54 | GPIO23 | bidirectional | General-purpose I/O 23 with mux options such as EQEP1_INDEX, SPIB_STE, LINA_RX, LINB_RX and EPWM4_B. |
| 55 | GPIO41 | bidirectional | General-purpose I/O 41 with mux options such as EPWM2_A, PMBUSA_SCL, FSIRXA_D1, EQEP1_B and LINB_RX. |
| 56 | GPIO22 | bidirectional | General-purpose I/O 22 with mux options such as EQEP1_STROBE, SPIB_CLK, LINA_TX and EPWM4_A. |
| 57 | GPIO7 | bidirectional | General-purpose I/O 7 with mux options such as EPWM4_B, OUTPUTXBAR5, EQEP1_B, SPIB_SIMO and FSITXA_CLK. |
| 58 | VSS | power_in | Digital ground. |
| 59 | VDD | power_in | 1.2V digital logic supply pin, needs decoupling for the internal VREG. |
| 60 | VDDIO | power_in | 3.3V digital I/O supply pin. |
| 61 | GPIO5 | bidirectional | General-purpose I/O 5 with mux options such as EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE and FSITXA_D1. |
| 62 | GPIO9 | bidirectional | General-purpose I/O 9 with mux options such as EPWM5_B, OUTPUTXBAR6, EQEP1_INDEX, SCIA_RX and SPIA_CLK. |
| 63 | GPIO10 | bidirectional | General-purpose I/O 10 with mux options such as EPWM6_A, ADCSOCBO, EQEP1_A, SPIA_SOMI and I2CA_SDA. |
| 64 | GPIO6 | bidirectional | General-purpose I/O 6 with mux options such as EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A and SPIB_SOMI. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 VDDIO 以 VSS 为基准 | VDDIO | -0.3 | | 4.6 | V | 以 VSS 为基准 | 51 |
| 电源电压 VDDA 以 VSSA 为基准 | VDDA | -0.3 | | 4.6 | V | 以 VSSA 为基准 | 51 |
| 输入电压 | VIN | -0.3 | | 4.6 | V | 3.3V 输入电压 | 51 |
| 输出电压 | VO | -0.3 | | 4.6 | V | | 51 |
| 输入钳位电流 每个引脚 | IIK | -20 | | 20 | mA | VIN < VSS/VSSA 或 VIN > VDDIO/VDDA | 51 |
| 输入钳位电流 所有输入总计 | IIKTOTAL | -20 | | 20 | mA | VIN < VSS/VSSA 或 VIN > VDDIO/VDDA | 51 |
| 输出电流 数字输出每引脚 | IOUT | -20 | | 20 | mA | 数字输出(每引脚) | 51 |
| 自然通风工作温度 | TA | -40 | | 125 | °C | 自然通风 | 51 |
| 工作结温 | TJ | -40 | | 150 | °C | | 51 |
| 贮存温度 | Tstg | -65 | | 150 | °C | | 51 |
| 器件电源电压 VDDIO 和 VDDA 启用内部 BOR | VDDIO, VDDA | | 3.3 | 3.63 | V | 启用内部 BOR | 52 |
| 器件电源电压 VDDIO 和 VDDA 禁用内部 BOR | VDDIO, VDDA | 2.8 | 3.3 | 3.63 | V | 禁用内部 BOR | 52 |
| 结温 | TJ | -40 | | 145 | °C | | 52 |
| 自然通风温度 | TA | -40 | | 125 | °C | | 52 |
| 输出低电平电压 | VOL | | | 0.4 | V | IOL = IOL 最大值 | 58 |
| 输出低电平电压 | VOL | | | 0.2 | V | IOL = 100µA | 58 |
| 所有输出引脚的高电平输出阻抗 | ROH | 45 | 65 | 100 | Ω | | 58 |
| 所有输出引脚的低电平输出阻抗 | ROL | 45 | 60 | 90 | Ω | | 58 |
| 高电平输入电压 | VIH | 2 | | | V | | 58 |
| 低电平输入电压 | VIL | | | 0.8 | V | | 58 |
| 内部稳压器输出 | VVREG | 1.14 | 1.2 | 1.32 | V | | 58 |
| VDDIO 欠压复位电压 | VBOR-VDDIO | 2.81 | | 3 | V | | 58 |
| 输入迟滞 | VHYSTERESIS | | 125 | | mV | | 58 |
| IDDIO 运行期间的 VDDIO 电流消耗 | IDDIO | | 35 | 72 | mA | 典型重负载应用,典型值 Vnom 30°C | 54 |
| IDDA 运行期间的 VDDA 电流消耗 | IDDA | | 3 | 5 | mA | 典型值 Vnom 30°C | 54 |
| 空闲模式 VDDIO 电流消耗 | IDDIO | | 16 | 33 | mA | CPU 处于空闲模式,闪存断电,XCLKOUT 关闭,为 IO 引脚启用上拉 | 54 |
| 空闲模式 VDDA 电流消耗 | IDDA | | 0.01 | 0.1 | mA | 器件处于空闲模式 | 54 |
| 待机模式 VDDIO 电流消耗 | IDDIO | | 8 | 22 | mA | CPU 处于待机模式,闪存断电,XCLKOUT 关闭,为 IO 引脚启用上拉 | 54 |
| 待机模式 VDDA 电流消耗 | IDDA | | 0.01 | 0.1 | mA | 器件处于待机模式 | 54 |
| 停机模式 VDDIO 电流消耗 | IDDIO | | 1 | 16 | mA | CPU 处于停机模式,闪存断电,XCLKOUT 关闭,为 IO 引脚启用上拉 | 54 |
| 闪存擦除/编程 VDDIO 电流消耗 | IDDIO | | 72 | 106 | mA | CPU 从 RAM 运行,100MHz SYSCLK,外设时钟关闭 | 54 |
| 闪存擦除/编程 VDDA 电流消耗 | IDDA | | 0.1 | 2.5 | mA | 擦除/编程周期期间 | 54 |
| 复位模式 VDDIO 电流消耗 | IDDIO | | | 8.6 | mA | 复位激活(XRSn 为低电平) | 54 |
| 复位模式 VDDA 电流消耗 | IDDA | | | 0.1 | mA | 复位激活(XRSn 为低电平) | 54 |
| 结至外壳热阻 PM 封装 | RΘJC | | 12.4 | | °C/W | | 59 |
| 结至电路板热阻 PM 封装 | RΘJB | | 25.6 | | °C/W | | 59 |
| 结至大气热阻 PM 封装 高 k PCB | RΘJA | | 51.8 | | °C/W | 0 lfm | 59 |
| 结至流动空气热阻 PM 封装 | RΘJMA | | 36.5 | | °C/W | 500 lfm | 59 |
| 结至封装顶部 PM 封装 | PsiJT | | 0.5 | | °C/W | 0 lfm | 59 |
| ADCCLK 时钟频率 | ADCCLK | 5 | | 50 | MHz | 源自 PERx.SYSCLK | 111 |
| ADC 采样速率 | | | | 3.45 | MSPS | 100MHz SYSCLK | 111 |
| ADC 外部基准电压 VREFHI 最小值 | VREFHI | 2.4 | | | V | 外部基准,最大值为 VDDA | 111 |
| ADC 内部基准 3.3V 范围转换范围 | | 0 | | 3.3 | V | 内部基准电压 = 3.3V 范围 | 111 |
| ADC 偏移量误差 | | -5 | | 5 | LSB | | 112 |
| ADC 外部基准增益误差 | | -5 | | 5 | LSB | 外部基准 | 112 |
| ADC INL 误差 | | -2 | | 2 | LSB | | 112 |
| ADC DNL 误差 | | -1 | | 1 | LSB | | 112 |
| 比较器以输入为基准的失调电压误差 | | -20 | | 20 | mV | 低共模,反相输入设置为 50mV | 119 |
| 比较器迟滞 1x | | 4 | 12 | 20 | LSB | 1x | 119 |
| 比较器 PSRR 电源抑制比 | | 46 | | | dB | 高达 250kHz | 119 |
| 比较器 CMRR 共模抑制比 | | 40 | | | dB | | 119 |
| CMPSS DAC 静态失调电压误差 | | -25 | | 25 | mV | 包含以比较器输入为基准的误差 | 120 |
| CMPSS DAC 静态增益误差 | | -2 | | 2 | FSR 百分比 | 包含以比较器输入为基准的误差 | 120 |
| PMBus 有效低电平输入电压 | VIL | | | 0.8 | V | | 145 |
| PMBus 有效高电平输入电压 | VIH | 2.1 | | | V | | 145 |
| PMBus 低电平输出电压 | VOL | | | 0.4 | V | 在 Ipullup = 4mA 时 | 145 |
| PMBus 低电平输出电流 | IOL | 4 | | | mA | VOL ≤ 0.4V | 145 |
| PMBus 快速模式 SCL 时钟频率 | fSCL | 10 | | 400 | kHz | | 145 |
| PMBus 快速模式 时钟低超时 | tTimeout | 25 | | 35 | ms | | 145 |
| PMBus 标准模式 SCL 时钟频率 | fSCL | 10 | | 100 | kHz | | 146 |
| PMBus 标准模式 SDA 和 SCL 上升时间 | tr | | | 1000 | ns | | 146 |
## CAD (KiCad official)
- Symbol: `F280025PMQR`
- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`
- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `f280025pmqr-etched.step` / `f280025pmqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `f280025pmqr.step` / `f280025pmqr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tms320f280025c) (245 pp, sha256 `0723d8e3e09e1f8b`, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/f280025pmqr-datasheet.pdf)