component
F280025CPNSR
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-80(12x12). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -77,7 +77,7 @@ "number": "5", "name": "XRSn", "type": "bidirectional",- "description": "Device reset (input) and watchdog reset (output); open-drain with internal pull-up; 2.2k\u03a9 to 10k\u03a9 external pull-up to VDDIO recommended."+ "description": "Device reset (input) and watchdog reset (output); open-drain with internal pull-up; 2.2kΩ to 10kΩ external pull-up to VDDIO recommended." }, { "number": "6",@@ -119,7 +119,7 @@ "number": "12", "name": "A3/C5/VDAC", "type": "input",- "description": "ADC-A input 3 or ADC-C input 5 or optional external reference for CMPSS DAC; internal capacitor to VSSA requires \u22651\u00b5F external capacitor if used as DAC reference."+ "description": "ADC-A input 3 or ADC-C input 5 or optional external reference for CMPSS DAC; internal capacitor to VSSA requires ≥1µF external capacitor if used as DAC reference." }, { "number": "13",@@ -167,7 +167,7 @@ "number": "20", "name": "VREFHI", "type": "input",- "description": "ADC high reference voltage (2.4V to 3.3V external or 1.65V/2.5V internal); requires \u22652.2\u00b5F decoupling capacitor placed close to device; must be \u2264VDDA + 0.3V."+ "description": "ADC high reference voltage (2.4V to 3.3V external or 1.65V/2.5V internal); requires ≥2.2µF decoupling capacitor placed close to device; must be ≤VDDA + 0.3V." }, { "number": "21",@@ -203,7 +203,7 @@ "number": "26", "name": "VDDA", "type": "power_in",- "description": "3.3V analog power supply pin; requires \u22652.2\u00b5F decoupling capacitor per power management module specification."+ "description": "3.3V analog power supply pin; requires ≥2.2µF decoupling capacitor per power management module specification." }, { "number": "27",@@ -245,13 +245,13 @@ "number": "33", "name": "FLT2", "type": "unconnected",- "description": "Flash test pin 2 reserved for TI; must remain unconnected or tie through \u22654.7k\u03a9 resistor to VSS."+ "description": "Flash test pin 2 reserved for TI; must remain unconnected or tie through ≥4.7kΩ resistor to VSS." }, { "number": "34", "name": "FLT1", "type": "unconnected",- "description": "Flash test pin 1 reserved for TI; must remain unconnected or tie through \u22654.7k\u03a9 resistor to VSS."+ "description": "Flash test pin 1 reserved for TI; must remain unconnected or tie through ≥4.7kΩ resistor to VSS." }, { "number": "35",@@ -329,7 +329,7 @@ "number": "47", "name": "TMS", "type": "bidirectional",- "description": "JTAG test mode select with internal pull-up; external 2.2k\u03a9 pull-up to VDDIO recommended for normal operation; sampled on TCK rising edge."+ "description": "JTAG test mode select with internal pull-up; external 2.2kΩ pull-up to VDDIO recommended for normal operation; sampled on TCK rising edge." }, { "number": "48",@@ -607,5 +607,8 @@ "docs/f280025cpnsr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }