← Commit history

f280025cpnsr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·255e82e492 · ·parent 0c9ddae
2 files changed +91−11
package.json+49−9
@@ -92,7 +92,7 @@         "number": "5",         "name": "XRSn",         "type": "bidirectional",-        "description": "Device reset (input) and watchdog reset (output); open-drain with internal pull-up; 2.2k\u03a9 to 10k\u03a9 external pull-up to VDDIO recommended."+        "description": "Device reset (input) and watchdog reset (output); open-drain with internal pull-up; 2.2kΩ to 10kΩ external pull-up to VDDIO recommended."       },       {         "number": "6",@@ -134,7 +134,7 @@         "number": "12",         "name": "A3/C5/VDAC",         "type": "input",-        "description": "ADC-A input 3 or ADC-C input 5 or optional external reference for CMPSS DAC; internal capacitor to VSSA requires \u22651\u00b5F external capacitor if used as DAC reference."+        "description": "ADC-A input 3 or ADC-C input 5 or optional external reference for CMPSS DAC; internal capacitor to VSSA requires ≥1µF external capacitor if used as DAC reference."       },       {         "number": "13",@@ -182,7 +182,7 @@         "number": "20",         "name": "VREFHI",         "type": "input",-        "description": "ADC high reference voltage (2.4V to 3.3V external or 1.65V/2.5V internal); requires \u22652.2\u00b5F decoupling capacitor placed close to device; must be \u2264VDDA + 0.3V."+        "description": "ADC high reference voltage (2.4V to 3.3V external or 1.65V/2.5V internal); requires ≥2.2µF decoupling capacitor placed close to device; must be ≤VDDA + 0.3V."       },       {         "number": "21",@@ -218,7 +218,7 @@         "number": "26",         "name": "VDDA",         "type": "power_in",-        "description": "3.3V analog power supply pin; requires \u22652.2\u00b5F decoupling capacitor per power management module specification."+        "description": "3.3V analog power supply pin; requires ≥2.2µF decoupling capacitor per power management module specification."       },       {         "number": "27",@@ -260,13 +260,13 @@         "number": "33",         "name": "FLT2",         "type": "unconnected",-        "description": "Flash test pin 2 reserved for TI; must remain unconnected or tie through \u22654.7k\u03a9 resistor to VSS."+        "description": "Flash test pin 2 reserved for TI; must remain unconnected or tie through ≥4.7kΩ resistor to VSS."       },       {         "number": "34",         "name": "FLT1",         "type": "unconnected",-        "description": "Flash test pin 1 reserved for TI; must remain unconnected or tie through \u22654.7k\u03a9 resistor to VSS."+        "description": "Flash test pin 1 reserved for TI; must remain unconnected or tie through ≥4.7kΩ resistor to VSS."       },       {         "number": "35",@@ -344,7 +344,7 @@         "number": "47",         "name": "TMS",         "type": "bidirectional",-        "description": "JTAG test mode select with internal pull-up; external 2.2k\u03a9 pull-up to VDDIO recommended for normal operation; sampled on TCK rising edge."+        "description": "JTAG test mode select with internal pull-up; external 2.2kΩ pull-up to VDDIO recommended for normal operation; sampled on TCK rising edge."       },       {         "number": "48",@@ -579,6 +579,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "f280025cpnsr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          14.0,+          14.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f782bdbc6327d920be33e2b9906695d7c3690117933775c3f145eac71f2013ac",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "f280025cpnsr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          14.0,+          14.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "04ac85ed3662b46758c48c5992e16b6367270ebc6f2f0f690a8e1f11aadfe082",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -564,7 +564,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "f280025cpnsr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          14.0,+          14.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f782bdbc6327d920be33e2b9906695d7c3690117933775c3f145eac71f2013ac",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "f280025cpnsr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          14.0,+          14.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "04ac85ed3662b46758c48c5992e16b6367270ebc6f2f0f690a8e1f11aadfe082",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -611,4 +651,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}