F280025CPMQR

{
  "schema_version": 1,
  "type": "component",
  "slug": "f280025cpmqr",
  "title": "F280025CPMQR",
  "brief": "Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "f280025cpmqr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "F280025CPMQR",
    "manufacturer": "Texas Instruments",
    "package": "LQFP-64(10x10)",
    "pin_count": 64,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tms320f280025c",
    "parts": {
      "symbol": "f280025cpmqr.kicad_sym",
      "footprint": "f280025cpmqr.kicad_mod",
      "model_3d": "f280025cpmqr-hero.glb",
      "model_3d_plain": "f280025cpmqr.glb",
      "model_3d_step": "f280025cpmqr-etched.step",
      "model_3d_step_plain": "f280025cpmqr.step",
      "lbr": "f280025cpmqr.lbr"
    },
    "distributor_links": {
      "lcsc": "C3231081",
      "digikey": "296-F280025CPMQRTR-ND",
      "mouser": "595-F280025CPMQR"
    },
    "distributor_check": {
      "checked_at": "2026-10-12T12:00:55Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-F280025CPMQRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-F280025CPMQR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GPIO29",
        "type": "bidirectional",
        "description": "General-purpose I/O 29, configured as an input with internal pull-up disabled at reset; alternates include SCIA_TX, EPWM7_B, OUTPUTXBAR6, EQEP1_B, EQEP2_INDEX, LINA_RX, SPIB_STE, ERRORSTS, I2CB_SCL and HIC_NCS."
      },
      {
        "number": "2",
        "name": "GPIO28",
        "type": "bidirectional",
        "description": "General-purpose I/O 28, configured as an input with internal pull-up disabled at reset; alternates include SCIA_RX, EPWM7_A, OUTPUTXBAR5, EQEP1_A, EQEP2_STROBE, LINA_TX, SPIB_CLK, ERRORSTS, I2CB_SDA and HIC_NOE."
      },
      {
        "number": "3",
        "name": "XRSn",
        "type": "bidirectional",
        "description": "Device reset input and watchdog reset output; open-drain with internal pull-up, a 2.2 kΩ to 10 kΩ resistor to VDDIO is recommended and any noise-filter capacitor to VSS should be 100 nF or less."
      },
      {
        "number": "4",
        "name": "VDD",
        "type": "power_in",
        "description": "1.2 V digital logic supply pin; decoupling is required per the power management module section (VDD is generated internally by VREG)."
      },
      {
        "number": "5",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground pin."
      },
      {
        "number": "6",
        "name": "A6",
        "type": "input",
        "description": "Analog input (ADC-A input, multiplexed with CMPSS-1 comparator inputs and AIO228 digital input); shared with analog group, see Table 5-1 for limits."
      },
      {
        "number": "7",
        "name": "C6",
        "type": "input",
        "description": "Analog input (ADC-C input, multiplexed with CMPSS-3 comparator inputs and AIO226 digital input)."
      },
      {
        "number": "8",
        "name": "A3/C5/VDAC",
        "type": "input",
        "description": "ADC-A input 3 / ADC-C input 5, and optional external reference for the on-chip CMPSS DAC; an internal capacitor to VSSA is always present, and at least one 1 µF capacitor is required if this pin is used as the DAC reference."
      },
      {
        "number": "9",
        "name": "A2/C9",
        "type": "input",
        "description": "ADC-A input 2 / ADC-C input 9, also CMPSS-1 comparator inputs and AIO224."
      },
      {
        "number": "10",
        "name": "A15/C7",
        "type": "input",
        "description": "ADC-A input 15 / ADC-C input 7, also CMPSS-1 comparator inputs and AIO233."
      },
      {
        "number": "11",
        "name": "A14/C4",
        "type": "input",
        "description": "ADC-A input 14 / ADC-C input 4, also CMPSS-3 comparator inputs and AIO239."
      },
      {
        "number": "12",
        "name": "A11/C0",
        "type": "input",
        "description": "ADC-A input 11 / ADC-C input 0, also CMPSS-1 comparator inputs and AIO237."
      },
      {
        "number": "13",
        "name": "A5/C2",
        "type": "input",
        "description": "ADC-A input 5 / ADC-C input 2, also CMPSS-3 comparator inputs and AIO244."
      },
      {
        "number": "14",
        "name": "A1",
        "type": "input",
        "description": "Analog input, also CMPSS-1 comparator inputs and AIO232."
      },
      {
        "number": "15",
        "name": "A0/C15",
        "type": "input",
        "description": "ADC-A input 0 / ADC-C input 15, also CMPSS-3 comparator inputs and AIO231."
      },
      {
        "number": "16",
        "name": "VREFHI",
        "type": "input",
        "description": "ADC high reference voltage; driven externally in external-reference mode or by the device in internal-reference mode, with at least one 2.2 µF capacitor placed between VREFHI and VREFLO as close to the device as possible."
      },
      {
        "number": "17",
        "name": "VREFLO",
        "type": "input",
        "description": "ADC low reference voltage, to be connected to VSSA."
      },
      {
        "number": "18",
        "name": "A12/C1",
        "type": "input",
        "description": "ADC-A input 12 / ADC-C input 1, also CMPSS-2 and CMPSS-4 comparator inputs and AIO238."
      },
      {
        "number": "19",
        "name": "A7/C3",
        "type": "input",
        "description": "ADC-A input 7 / ADC-C input 3, also CMPSS-4 comparator inputs and AIO245."
      },
      {
        "number": "20",
        "name": "A8/C11",
        "type": "input",
        "description": "ADC-A input 8 / ADC-C input 11, also CMPSS-2 and CMPSS-4 comparator inputs and AIO241."
      },
      {
        "number": "21",
        "name": "VSSA",
        "type": "power_in",
        "description": "Analog ground pin for the ADC and CMPSS."
      },
      {
        "number": "22",
        "name": "VDDA",
        "type": "power_in",
        "description": "3.3 V analog supply pin; place a decoupling capacitor of at least 2.2 µF on this pin."
      },
      {
        "number": "23",
        "name": "A4/C14",
        "type": "input",
        "description": "ADC-A input 4 / ADC-C input 14, also CMPSS-2, CMPSS-4 comparator inputs and AIO225."
      },
      {
        "number": "24",
        "name": "A9/C8",
        "type": "input",
        "description": "ADC-A input 9 / ADC-C input 8, also CMPSS-2 and CMPSS-4 comparator inputs and AIO227."
      },
      {
        "number": "25",
        "name": "A10/C10",
        "type": "input",
        "description": "ADC-A input 10 / ADC-C input 10, also CMPSS-2 comparator inputs and AIO230."
      },
      {
        "number": "26",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground pin."
      },
      {
        "number": "27",
        "name": "VDD",
        "type": "power_in",
        "description": "1.2 V digital logic supply pin."
      },
      {
        "number": "28",
        "name": "VDDIO",
        "type": "power_in",
        "description": "3.3 V digital I/O supply pin."
      },
      {
        "number": "29",
        "name": "GPIO13",
        "type": "bidirectional",
        "description": "General-purpose I/O 13 (default GPIO); alternates include EPWM7_B, EQEP1_INDEX, PMBUSA_ALERT (open-drain), FSIRXA_CLK, LINB_RX, SPIA_SOMI, CANA_TX, HIC_D11 and HIC_D5."
      },
      {
        "number": "30",
        "name": "GPIO12",
        "type": "bidirectional",
        "description": "General-purpose I/O 12 (default GPIO); alternates include EPWM7_A, EQEP1_STROBE, PMBUSA_CTL, FSIRXA_D0, LINB_TX, SPIA_CLK, CANA_RX, HIC_D13 and HIC_INT."
      },
      {
        "number": "31",
        "name": "GPIO11",
        "type": "bidirectional",
        "description": "General-purpose I/O 11 (default GPIO); alternates include EPWM6_B, OUTPUTXBAR7, EQEP1_B, SPIA_STE, FSIRXA_D1, LINB_RX, EQEP2_A, SPIA_SIMO, HIC_D6 and HIC_NBE0."
      },
      {
        "number": "32",
        "name": "GPIO33",
        "type": "bidirectional",
        "description": "General-purpose I/O 33 (default GPIO); alternates include I2CA_SCL (open-drain), SPIB_STE, OUTPUTXBAR4, LINA_RX, FSIRXA_CLK, CANA_RX, EQEP2_B, ADCSOCAO and HIC_D0."
      },
      {
        "number": "33",
        "name": "GPIO16",
        "type": "bidirectional",
        "description": "General-purpose I/O 16 (default GPIO); alternates include SPIA_SIMO, OUTPUTXBAR7, EPWM5_A, SCIA_TX, EQEP1_STROBE, PMBUSA_SCL (open-drain), XCLKOUT, EQEP2_B, SPIB_SOMI and HIC_D1."
      },
      {
        "number": "34",
        "name": "GPIO17",
        "type": "bidirectional",
        "description": "General-purpose I/O 17 (default GPIO); alternates include SPIA_SOMI, OUTPUTXBAR8, EPWM5_B, SCIA_RX, EQEP1_INDEX, PMBUSA_SDA (open-drain), CANA_TX and HIC_D2."
      },
      {
        "number": "35",
        "name": "GPIO24",
        "type": "bidirectional",
        "description": "General-purpose I/O 24 (default GPIO); alternates include OUTPUTXBAR1, EQEP2_A, SPIB_SIMO, LINB_TX, PMBUSA_SCL (open-drain), SCIA_TX, ERRORSTS (requires external pull-down when used) and HIC_D3."
      },
      {
        "number": "36",
        "name": "TCK",
        "type": "input",
        "description": "JTAG test clock input with internal pull-up enabled; this pin does not have a TRSTn companion."
      },
      {
        "number": "37",
        "name": "GPIO37/TDO",
        "type": "tri_state",
        "description": "JTAG test data output (default function); tri-stated when no JTAG activity, so an internal pull-up should be enabled or an external pull-up added to avoid a floating GPIO input; alternates include GPIO37 OUTPUTXBAR2, I2CA_SCL, SCIA_TX, CANA_TX, LINA_TX, EQEP1_B, PMBUSA_ALERT and HIC_NRDY."
      },
      {
        "number": "38",
        "name": "TMS",
        "type": "bidirectional",
        "description": "JTAG test mode select input with internal pull-up; an external 2.2 kΩ pull-up to VDDIO is recommended to hold JTAG in reset during normal operation."
      },
      {
        "number": "39",
        "name": "GPIO35/TDI",
        "type": "input",
        "description": "JTAG test data input (default function); internal pull-up is disabled by default, so an internal or external pull-up should be used to avoid a floating input; in cJTAG mode this pin is available as GPIO35."
      },
      {
        "number": "40",
        "name": "GPIO32",
        "type": "bidirectional",
        "description": "General-purpose I/O 32 (default GPIO); alternates include I2CA_SDA (open-drain), SPIB_CLK, LINA_TX, FSIRXA_D0, CANA_TX, ADCSOCBO and HIC_INT."
      },
      {
        "number": "41",
        "name": "GPIO18_X2",
        "type": "bidirectional",
        "description": "General-purpose I/O 18 / crystal oscillator output X2 (ALT function); used as X2 when the XTAL oscillator is enabled, and GPIO18 otherwise."
      },
      {
        "number": "42",
        "name": "GPIO19_X1",
        "type": "bidirectional",
        "description": "General-purpose I/O 19 / crystal oscillator or single-ended clock input X1 (ALT function); the device initialization software must configure this pin before enabling the crystal oscillator."
      },
      {
        "number": "43",
        "name": "VDDIO",
        "type": "power_in",
        "description": "3.3 V digital I/O supply pin."
      },
      {
        "number": "44",
        "name": "VDD",
        "type": "power_in",
        "description": "1.2 V digital logic supply pin."
      },
      {
        "number": "45",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground pin."
      },
      {
        "number": "46",
        "name": "GPIO39",
        "type": "bidirectional",
        "description": "General-purpose I/O 39 (default GPIO); alternates include FSIRXA_CLK, EQEP2_INDEX, CLB_OUTPUTXBAR2, SYNCOUT, EQEP1_INDEX and HIC_D7."
      },
      {
        "number": "47",
        "name": "GPIO8",
        "type": "bidirectional",
        "description": "General-purpose I/O 8 (default GPIO); alternates include EPWM5_A, ADCSOCAO, EQEP1_STROBE, SCIA_TX, SPIA_SIMO, I2CA_SCL (open-drain), FSITXA_D1, CLB_OUTPUTXBAR5, HIC_A0, FSITXA_TDM_CLK and HIC_D8."
      },
      {
        "number": "48",
        "name": "GPIO4",
        "type": "bidirectional",
        "description": "General-purpose I/O 4 (default GPIO); alternates include EPWM3_A, OUTPUTXBAR3, CANA_TX, SPIB_CLK, EQEP2_STROBE, FSIRXA_CLK, CLB_OUTPUTXBAR6, HIC_BASESEL2 and HIC_NWE."
      },
      {
        "number": "49",
        "name": "GPIO3",
        "type": "bidirectional",
        "description": "General-purpose I/O 3 (default GPIO); alternates include EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL (open-drain), SPIA_CLK, SCIA_RX, FSIRXA_D0, I2CB_SCL (open-drain), HIC_NOE, CANA_RX and HIC_D4."
      },
      {
        "number": "50",
        "name": "GPIO2",
        "type": "bidirectional",
        "description": "General-purpose I/O 2 (default GPIO); alternates include EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA (open-drain), SPIA_SIMO, SCIA_TX, FSIRXA_D1, I2CB_SDA (open-drain), HIC_A1, CANA_TX and HIC_D9."
      },
      {
        "number": "51",
        "name": "GPIO1",
        "type": "bidirectional",
        "description": "General-purpose I/O 1 (default GPIO); alternates include EPWM1_B, I2CA_SCL (open-drain), SPIA_SOMI, CLB_OUTPUTXBAR7, HIC_A2, FSITXA_TDM_D1, and HIC_D10."
      },
      {
        "number": "52",
        "name": "GPIO0",
        "type": "bidirectional",
        "description": "General-purpose I/O 0 (default GPIO); alternates include EPWM1_A, I2CA_SDA (open-drain), SPIA_STE, FSIRXA_CLK, CLB_OUTPUTXBAR8 and HIC_BASESEL1."
      },
      {
        "number": "53",
        "name": "GPIO40",
        "type": "bidirectional",
        "description": "General-purpose I/O 40 (default GPIO); alternates include SPIB_SIMO, EPWM2_B, PMBUSA_SDA (open-drain), FSIRXA_D0, EQEP1_A, LINB_TX, HIC_NBE1 and HIC_D5."
      },
      {
        "number": "54",
        "name": "GPIO23",
        "type": "bidirectional",
        "description": "General-purpose I/O 23 (default GPIO); alternates include EQEP1_INDEX, SPIB_STE, LINA_RX, LINB_RX, HIC_A3, EPWM4_B and HIC_D11."
      },
      {
        "number": "55",
        "name": "GPIO41",
        "type": "bidirectional",
        "description": "General-purpose I/O 41 (default GPIO); alternates include EPWM2_A, PMBUSA_SCL (open-drain), FSIRXA_D1, EQEP1_B, LINB_RX, HIC_A4, SPIB_SOMI and HIC_D12."
      },
      {
        "number": "56",
        "name": "GPIO22",
        "type": "bidirectional",
        "description": "General-purpose I/O 22 (default GPIO); alternates include EQEP1_STROBE, SPIB_CLK, LINA_TX, CLB_OUTPUTXBAR1, LINB_TX, HIC_A5, EPWM4_A and HIC_D13."
      },
      {
        "number": "57",
        "name": "GPIO7",
        "type": "bidirectional",
        "description": "General-purpose I/O 7 (default GPIO); alternates include EPWM4_B, OUTPUTXBAR5, EQEP1_B, SPIB_SIMO, FSITXA_CLK, CLB_OUTPUTXBAR2, HIC_A6 and HIC_D14."
      },
      {
        "number": "58",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground pin."
      },
      {
        "number": "59",
        "name": "VDD",
        "type": "power_in",
        "description": "1.2 V digital logic supply pin."
      },
      {
        "number": "60",
        "name": "VDDIO",
        "type": "power_in",
        "description": "3.3 V digital I/O supply pin."
      },
      {
        "number": "61",
        "name": "GPIO5",
        "type": "bidirectional",
        "description": "General-purpose I/O 5 (default GPIO); alternates include EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE, FSITXA_D1, CLB_OUTPUTXBAR5, HIC_A7, HIC_D4 and HIC_D15."
      },
      {
        "number": "62",
        "name": "GPIO9",
        "type": "bidirectional",
        "description": "General-purpose I/O 9 (default GPIO); alternates include EPWM5_B, OUTPUTXBAR6, EQEP1_INDEX, SCIA_RX, SPIA_CLK, FSITXA_D0, LINB_RX, HIC_BASESEL0, I2CB_SCL (open-drain) and HIC_NRDY."
      },
      {
        "number": "63",
        "name": "GPIO10",
        "type": "bidirectional",
        "description": "General-purpose I/O 10 (default GPIO); alternates include EPWM6_A, ADCSOCBO, EQEP1_A, SPIA_SOMI, I2CA_SDA (open-drain), FSITXA_CLK, LINB_TX, HIC_NWE and FSITXA_TDM_D0."
      },
      {
        "number": "64",
        "name": "GPIO6",
        "type": "bidirectional",
        "description": "General-purpose I/O 6 (default GPIO); alternates include EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, SPIB_SOMI, FSITXA_D0, FSITXA_D1, HIC_NBE1, CLB_OUTPUTXBAR8 and HIC_D14."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN F280025CPMQR is not listed in the datasheet ordering addendum (only F280023/F280023C/F280021; Pin 37 (GPIO37/TDO) and pin 39 (GPIO35/TDI) default to JTAG functions; GPIO37 and GPIO35 are only GP; Pins 41 and 42 are GPIO18_X2 and GPIO19_X1, which double as crystal X2/X1 and the single-ended clock"
        ],
        "pages_sent": 169,
        "cost_usd": 1.0465,
        "at": "2026-10-12T12:00:27"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tms320f280025c",
        "pages": 245,
        "sha256": "0723d8e3e09e1f8b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 64,
        "described": 64,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "f280025cpmqr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          12,
          12,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "f280025cpmqr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          12,
          12,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "cb8cf2d1ed809b54215770ab64bd40598e2b94d0cc810a8c5749b14f317c3704",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "LQFP-64(10x10)",
      "Category": "Embedded Processors & Controllers",
      "Pins": "64"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "f280025cpmqr"
  ],
  "discovery_pitch": "F280025CPMQR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "f280025cpmqr.kicad_sym",
    "f280025cpmqr.kicad_mod",
    "f280025cpmqr.glb",
    "f280025cpmqr.step",
    "f280025cpmqr.lbr",
    "docs/hero.png",
    "docs/f280025cpmqr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "f280025cpmqr-hero.glb",
    "f280025cpmqr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}