component
F280023CPMSR
Public Made by Adomby adom
Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
e7dfa7a
F280023CPMSR
Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
F280023CPMSR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO29 | bidirectional | General-purpose input/output 29 (muxed peripheral functions). |
| 2 | GPIO28 | bidirectional | General-purpose input/output 28 (muxed peripheral functions). |
| 3 | XRSn | bidirectional | Device reset pin with an internal pullup that is always active. |
| 4 | VDD | power_in | 1.2-V digital logic power pin; place a decoupling capacitor near each VDD pin (about 10 µF total) and connect all VDD pins together. |
| 5 | VSS | power_in | Digital ground; must be connected to board ground. |
| 6 | A6 | input | ADC-A input 6 with CMPSS-1 comparator input and AIO228 digital input function. |
| 7 | C6 | input | ADC-C input 6 with CMPSS-3 comparator input and AIO226 digital input function. |
| 8 | A3,C5,VDAC | input | ADC-A input 3 / ADC-C input 5 with CMPSS-3 inputs and AIO242; also optional external reference for the on-chip COMPDACs (use at least a 1-µF capacitor if used as VDAC). |
| 9 | A2,C9 | input | ADC-A input 2 / ADC-C input 9 with CMPSS-1 comparator inputs and AIO224 digital input function. |
| 10 | A15,C7 | input | ADC-A input 15 / ADC-C input 7 with CMPSS-1 comparator inputs and AIO233 digital input function. |
| 11 | A14,C4 | input | ADC-A input 14 / ADC-C input 4 with CMPSS-3 comparator inputs, AIO239 and HIC address 5 function. |
| 12 | A11,C0 | input | ADC-A input 11 / ADC-C input 0 with CMPSS-1 comparator inputs, AIO237 and HIC address 6 function. |
| 13 | A5,C2 | input | ADC-A input 5 / ADC-C input 2 with CMPSS-3 comparator inputs and AIO244 digital input function. |
| 14 | A1 | input | ADC-A input 1 with CMPSS-1 comparator inputs, AIO232 and HIC base address select 0 function. |
| 15 | A0,C15 | input | ADC-A input 0 / ADC-C input 15 with CMPSS-3 comparator inputs, AIO231 and HIC base address select 1 function. |
| 16 | VREFHI | input | ADC high reference; tie to VDDA if the ADC is not used. |
| 17 | VREFLO | input | ADC low reference (also A13/C13 input); tie to VSSA if unused. |
| 18 | A12,C1 | input | ADC-A input 12 / ADC-C input 1 with CMPSS-2/4 comparator inputs, AIO238 and HIC chip select function. |
| 19 | A7,C3 | input | ADC-A input 7 / ADC-C input 3 with CMPSS-4 comparator inputs and AIO245 digital input function. |
| 20 | A8,C11 | input | ADC-A input 8 / ADC-C input 11 with CMPSS-2/4 comparator inputs and AIO241 digital input function. |
| 21 | VSSA | power_in | Analog ground; tie to VSS if a separate analog ground is not used. |
| 22 | VDDA | power_in | 3.3-V analog power pin; place a minimum 2.2-µF decoupling capacitor on the pin. |
| 23 | A4,C14 | input | ADC-A input 4 / ADC-C input 14 with CMPSS-2/4 comparator inputs and AIO225 digital input function. |
| 24 | A9,C8 | input | ADC-A input 9 / ADC-C input 8 with CMPSS-2/4 comparator inputs and AIO227 digital input function. |
| 25 | A10,C10 | input | ADC-A input 10 / ADC-C input 10 with CMPSS-2 comparator inputs, AIO230 and HIC base address select 2 function. |
| 26 | VSS | power_in | Digital ground; must be connected to board ground. |
| 27 | VDD | power_in | 1.2-V digital logic power pin; place a decoupling capacitor near each VDD pin (about 10 µF total) and connect all VDD pins together. |
| 28 | VDDIO | power_in | 3.3-V digital I/O power pin; place a minimum 0.1-µF decoupling capacitor on each pin plus about 20 µF shared bulk capacitance. |
| 29 | GPIO13 | bidirectional | General-purpose input/output 13 (muxed ePWM-7 B, eQEP-1 index, PMBus-A alert, FSIRX-A clock, LIN-B RX, SPI-A SOMI, CAN-A TX, HIC functions). |
| 30 | GPIO12 | bidirectional | General-purpose input/output 12 (muxed ePWM-7 A, eQEP-1 strobe, PMBus-A control, FSIRX-A D0, LIN-B TX, SPI-A clock, CAN-A RX, HIC functions). |
| 31 | GPIO11 | bidirectional | General-purpose input/output 11 (muxed peripheral functions). |
| 32 | GPIO33 | bidirectional | General-purpose input/output 33 (muxed peripheral functions). |
| 33 | GPIO16 | bidirectional | General-purpose input/output 16 (muxed SPI-A SIMO, ePWM-5 A, SCI-A TX, XCLKOUT, HIC D1 and others). |
| 34 | GPIO17 | bidirectional | General-purpose input/output 17 (muxed SPI-A SOMI, ePWM-5 B, SCI-A RX, CAN-A TX, HIC D2 and others). |
| 35 | GPIO24 | bidirectional | General-purpose input/output 24 (muxed Output X-BAR 1, eQEP-2 A, SPI-B SIMO, SCI-A TX, ERRORSTS, HIC D3 and others). |
| 36 | TCK | input | JTAG test clock with internal pullup. |
| 37 | GPIO37/TDO | bidirectional | GPIO37 with JTAG TDO as default mux; tristates when no JTAG activity, so enable the internal pullup or add an external pullup. |
| 38 | TMS | bidirectional | JTAG test-mode select with internal pullup, clocked into the TAP controller on rising edge of TCK; add an external pullup (2.2 kΩ recommended) to VDDIO. |
| 39 | GPIO35/TDI | bidirectional | GPIO35 with JTAG TDI as default mux; internal pullup disabled by default, so enable it or add an external pullup. |
| 40 | GPIO32 | bidirectional | General-purpose input/output 32 (muxed peripheral functions). |
| 41 | GPIO18_X2 | bidirectional | General-purpose input/output 18, or crystal oscillator output X2 in ALT function (also SPI-A clock, CAN-A RX, ePWM-6 A, I2C-A SCL, XCLKOUT). |
| 42 | GPIO19_X1 | bidirectional | General-purpose input/output 19, or crystal oscillator input / single-ended 3.3-V clock input X1 in ALT function (also SPI-A STE, CAN-A TX, ePWM-6 B, I2C-A SDA). |
| 43 | VDDIO | power_in | 3.3-V digital I/O power pin; place a minimum 0.1-µF decoupling capacitor on each pin plus about 20 µF shared bulk capacitance. |
| 44 | VDD | power_in | 1.2-V digital logic power pin; place a decoupling capacitor near each VDD pin (about 10 µF total) and connect all VDD pins together. |
| 45 | VSS | power_in | Digital ground; must be connected to board ground. |
| 46 | GPIO39 | bidirectional | General-purpose input/output 39 (muxed peripheral functions). |
| 47 | GPIO8 | bidirectional | General-purpose input/output 8 (muxed peripheral functions). |
| 48 | GPIO4 | bidirectional | General-purpose input/output 4 (muxed peripheral functions). |
| 49 | GPIO3 | bidirectional | General-purpose input/output 3 (muxed peripheral functions). |
| 50 | GPIO2 | bidirectional | General-purpose input/output 2 (muxed peripheral functions). |
| 51 | GPIO1 | bidirectional | General-purpose input/output 1 (muxed peripheral functions). |
| 52 | GPIO0 | bidirectional | General-purpose input/output 0 (muxed peripheral functions). |
| 53 | GPIO40 | bidirectional | General-purpose input/output 40 (muxed peripheral functions). |
| 54 | GPIO23 | bidirectional | General-purpose input/output 23 (muxed eQEP-1 index, SPI-B STE, LIN-A RX, LIN-B RX, ePWM-4 B, HIC functions). |
| 55 | GPIO41 | bidirectional | General-purpose input/output 41 (muxed peripheral functions). |
| 56 | GPIO22 | bidirectional | General-purpose input/output 22 (muxed eQEP-1 strobe, SPI-B clock, LIN-A TX, LIN-B TX, ePWM-4 A, HIC functions). |
| 57 | GPIO7 | bidirectional | General-purpose input/output 7 (muxed peripheral functions). |
| 58 | VSS | power_in | Digital ground; must be connected to board ground. |
| 59 | VDD | power_in | 1.2-V digital logic power pin; place a decoupling capacitor near each VDD pin (about 10 µF total) and connect all VDD pins together. |
| 60 | VDDIO | power_in | 3.3-V digital I/O power pin; place a minimum 0.1-µF decoupling capacitor on each pin plus about 20 µF shared bulk capacitance. |
| 61 | GPIO5 | bidirectional | General-purpose input/output 5 (muxed peripheral functions). |
| 62 | GPIO9 | bidirectional | General-purpose input/output 9 (muxed peripheral functions). |
| 63 | GPIO10 | bidirectional | General-purpose input/output 10 (muxed peripheral functions). |
| 64 | GPIO6 | bidirectional | General-purpose input/output 6 (muxed peripheral functions). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDDIO/VDDA supply voltage, BOR disabled | VDDIO, VDDA | 2.8 | 3.3 | 3.63 | V | Internal BOR disabled | 53 |
| VDDIO/VDDA supply voltage, BOR enabled | VDDIO, VDDA | 3.3 | 3.63 | V | Internal BOR enabled; min is VBOR-VDDIO(MAX) + VBOR-GB | 53 | |
| Supply ramp rate | SRSUPPLY | 20 | 100 | mV/us | VDDIO, VDDA with respect to VSS | 53 | |
| VDDIO supply ramp time | tVDDIO-RAMP | 10 | ms | 1 V to VBOR-VDDIO(MAX) | 53 | ||
| Digital input voltage | VIN | -0.3 | V | VSS, 0.3 min; VDDIO + 0.3 max | 53 | ||
| VDDIO BOR guard band | VBOR-GB | 0.1 | V | 53 | |||
| Junction temperature, S version | TJ | -40 | 125 | °C | S version | 53 | |
| Free-air temperature, Q version | TA | -40 | 125 | °C | Q version (AEC Q100) | 53 | |
| Supply voltage VDDIO | VDDIO | -0.3 | 4.6 | V | with respect to VSS | 52 | |
| Supply voltage VDDA | VDDA | -0.3 | 4.6 | V | with respect to VSSA | 52 | |
| Input voltage | VIN | -0.3 | 4.6 | V | 3.3 V | 52 | |
| Output voltage | VO | -0.3 | 4.6 | V | 52 | ||
| Input clamp current per pin | IIK | -20 | 20 | mA | Digital/analog input, VIN < VSS/VSSA or VIN > VDDIO/VDDA | 52 | |
| Input clamp current total | IIKTOTAL | -20 | 20 | mA | Total for all inputs, VIN < VSS/VSSA or VIN > VDDIO/VDDA | 52 | |
| Digital output current per pin | IOUT | -20 | 20 | mA | 52 | ||
| Free-air temperature | TA | -40 | 125 | °C | 52 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 52 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 52 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = IOL MAX | 59 | ||
| Low-level output voltage | VOL | 0.2 | V | IOL = 100 µA | 59 | ||
| High-level output source current for all output pins | IOH | -4 | mA | 59 | |||
| Low-level output sink current for all output pins | IOL | 4 | mA | 59 | |||
| High-level output impedance for all output pins | ROH | 45 | 65 | 100 | Ω | 59 | |
| Low-level output impedance for all output pins | ROL | 45 | 60 | 90 | Ω | 59 | |
| High-level input voltage | VIH | 2 | V | 59 | |||
| Low-level input voltage | VIL | 0.8 | V | 59 | |||
| Input hysteresis | VHYSTERESIS | 125 | mV | 59 | |||
| Input current, pins with pulldown | IPULLDOWN | 120 | µA | VDDIO = 3.3 V, VIN = VDDIO | 59 | ||
| Input current, digital inputs with pullup enabled | IPULLUP | 160 | µA | VDDIO = 3.3 V, VIN = 0 V | 59 | ||
| Pin leakage, digital inputs | ILEAK | 0.1 | µA | Pullups and outputs disabled, 0 V ≤ VIN ≤ VDDIO | 59 | ||
| Pin leakage, analog pins (except ADCINA3/VDAC) | ILEAK | 0.1 | µA | Analog drivers disabled, 0 V ≤ VIN ≤ VDDA | 59 | ||
| Input capacitance, digital inputs | CI | 2 | pF | Digital inputs | 59 | ||
| VDDIO brown out reset voltage | VBOR-VDDIO | 2.81 | 3 | V | 59 | ||
| Internal voltage regulator output | VVREG | 1.14 | 1.2 | 1.32 | V | 59 | |
| VDDIO current, operational | IDDIO | 35 | 72 | mA | Operating mode; TYP at Vnom, 30℃ | 55 | |
| VDDA current, operational | IDDA | 3 | 5 | mA | Operating mode; TYP at Vnom, 30℃ | 55 | |
| VDDIO current, Idle mode | IDDIO | 16 | 33 | mA | CPU in IDLE, flash powered down, XCLKOUT off, pull up enabled | 55 | |
| VDDIO current, Standby mode | IDDIO | 8 | 22 | mA | CPU in STANDBY, flash powered down, XCLKOUT off, pull up enabled | 55 | |
| VDDIO current, Halt mode | IDDIO | 1 | 16 | mA | CPU in HALT, flash powered down, XCLKOUT off, pull up enabled | 55 | |
| VDDIO current, flash erase/program | IDDIO | 72 | 106 | mA | CPU running from RAM, SYSCLK at 100 MHz, I/Os inputs with pullups, peripheral clocks off | 55 | |
| INTOSC frequency | fINTOSC | 9.8 | 10 | 10.15 | MHz | -40°C to 125°C | 73 |
| INTOSC frequency | fINTOSC | 9.85 | 10 | 10.15 | MHz | -30°C to 90°C | 73 |
| System clock frequency | f(SYSCLK) | 2 | 100 | MHz | 70 | ||
| ADC gain error, internal reference | -45 | 45 | LSB | Internal reference | 100 | ||
| ADC gain error, external reference | -5 | 3 | 5 | LSB | External reference; typ printed as ±3 | 100 | |
| ADC offset error | -5 | 2 | 5 | LSB | typ printed as ±2 | 100 | |
| ADC INL error | INL | -2 | 1 | 2 | LSB | typ printed as ±1.0 | 100 |
| Temperature sensor accuracy | Tacc | -15 | 15 | °C | External reference | 104 | |
| Junction-to-case thermal resistance, PM package | RΘJC | 12.4 | °C/W | 60 | |||
| Junction-to-board thermal resistance, PM package | RΘJB | 25.6 | °C/W | 60 | |||
| Junction-to-free air thermal resistance, PM package | RΘJA | 51.8 | °C/W | High k PCB, airflow 0 lfm | 60 |
CAD (KiCad official)
- Symbol:
F280023CPMSR - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
f280023cpmsr-etched.step/f280023cpmsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);f280023cpmsr.step/f280023cpmsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (208 pp, sha256
811491748b698c36, retrieved 2026-11-13, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# F280023CPMSR
**Texas Instruments** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
F280023CPMSR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO29 | bidirectional | General-purpose input/output 29 (muxed peripheral functions). |
| 2 | GPIO28 | bidirectional | General-purpose input/output 28 (muxed peripheral functions). |
| 3 | XRSn | bidirectional | Device reset pin with an internal pullup that is always active. |
| 4 | VDD | power_in | 1.2-V digital logic power pin; place a decoupling capacitor near each VDD pin (about 10 µF total) and connect all VDD pins together. |
| 5 | VSS | power_in | Digital ground; must be connected to board ground. |
| 6 | A6 | input | ADC-A input 6 with CMPSS-1 comparator input and AIO228 digital input function. |
| 7 | C6 | input | ADC-C input 6 with CMPSS-3 comparator input and AIO226 digital input function. |
| 8 | A3,C5,VDAC | input | ADC-A input 3 / ADC-C input 5 with CMPSS-3 inputs and AIO242; also optional external reference for the on-chip COMPDACs (use at least a 1-µF capacitor if used as VDAC). |
| 9 | A2,C9 | input | ADC-A input 2 / ADC-C input 9 with CMPSS-1 comparator inputs and AIO224 digital input function. |
| 10 | A15,C7 | input | ADC-A input 15 / ADC-C input 7 with CMPSS-1 comparator inputs and AIO233 digital input function. |
| 11 | A14,C4 | input | ADC-A input 14 / ADC-C input 4 with CMPSS-3 comparator inputs, AIO239 and HIC address 5 function. |
| 12 | A11,C0 | input | ADC-A input 11 / ADC-C input 0 with CMPSS-1 comparator inputs, AIO237 and HIC address 6 function. |
| 13 | A5,C2 | input | ADC-A input 5 / ADC-C input 2 with CMPSS-3 comparator inputs and AIO244 digital input function. |
| 14 | A1 | input | ADC-A input 1 with CMPSS-1 comparator inputs, AIO232 and HIC base address select 0 function. |
| 15 | A0,C15 | input | ADC-A input 0 / ADC-C input 15 with CMPSS-3 comparator inputs, AIO231 and HIC base address select 1 function. |
| 16 | VREFHI | input | ADC high reference; tie to VDDA if the ADC is not used. |
| 17 | VREFLO | input | ADC low reference (also A13/C13 input); tie to VSSA if unused. |
| 18 | A12,C1 | input | ADC-A input 12 / ADC-C input 1 with CMPSS-2/4 comparator inputs, AIO238 and HIC chip select function. |
| 19 | A7,C3 | input | ADC-A input 7 / ADC-C input 3 with CMPSS-4 comparator inputs and AIO245 digital input function. |
| 20 | A8,C11 | input | ADC-A input 8 / ADC-C input 11 with CMPSS-2/4 comparator inputs and AIO241 digital input function. |
| 21 | VSSA | power_in | Analog ground; tie to VSS if a separate analog ground is not used. |
| 22 | VDDA | power_in | 3.3-V analog power pin; place a minimum 2.2-µF decoupling capacitor on the pin. |
| 23 | A4,C14 | input | ADC-A input 4 / ADC-C input 14 with CMPSS-2/4 comparator inputs and AIO225 digital input function. |
| 24 | A9,C8 | input | ADC-A input 9 / ADC-C input 8 with CMPSS-2/4 comparator inputs and AIO227 digital input function. |
| 25 | A10,C10 | input | ADC-A input 10 / ADC-C input 10 with CMPSS-2 comparator inputs, AIO230 and HIC base address select 2 function. |
| 26 | VSS | power_in | Digital ground; must be connected to board ground. |
| 27 | VDD | power_in | 1.2-V digital logic power pin; place a decoupling capacitor near each VDD pin (about 10 µF total) and connect all VDD pins together. |
| 28 | VDDIO | power_in | 3.3-V digital I/O power pin; place a minimum 0.1-µF decoupling capacitor on each pin plus about 20 µF shared bulk capacitance. |
| 29 | GPIO13 | bidirectional | General-purpose input/output 13 (muxed ePWM-7 B, eQEP-1 index, PMBus-A alert, FSIRX-A clock, LIN-B RX, SPI-A SOMI, CAN-A TX, HIC functions). |
| 30 | GPIO12 | bidirectional | General-purpose input/output 12 (muxed ePWM-7 A, eQEP-1 strobe, PMBus-A control, FSIRX-A D0, LIN-B TX, SPI-A clock, CAN-A RX, HIC functions). |
| 31 | GPIO11 | bidirectional | General-purpose input/output 11 (muxed peripheral functions). |
| 32 | GPIO33 | bidirectional | General-purpose input/output 33 (muxed peripheral functions). |
| 33 | GPIO16 | bidirectional | General-purpose input/output 16 (muxed SPI-A SIMO, ePWM-5 A, SCI-A TX, XCLKOUT, HIC D1 and others). |
| 34 | GPIO17 | bidirectional | General-purpose input/output 17 (muxed SPI-A SOMI, ePWM-5 B, SCI-A RX, CAN-A TX, HIC D2 and others). |
| 35 | GPIO24 | bidirectional | General-purpose input/output 24 (muxed Output X-BAR 1, eQEP-2 A, SPI-B SIMO, SCI-A TX, ERRORSTS, HIC D3 and others). |
| 36 | TCK | input | JTAG test clock with internal pullup. |
| 37 | GPIO37/TDO | bidirectional | GPIO37 with JTAG TDO as default mux; tristates when no JTAG activity, so enable the internal pullup or add an external pullup. |
| 38 | TMS | bidirectional | JTAG test-mode select with internal pullup, clocked into the TAP controller on rising edge of TCK; add an external pullup (2.2 kΩ recommended) to VDDIO. |
| 39 | GPIO35/TDI | bidirectional | GPIO35 with JTAG TDI as default mux; internal pullup disabled by default, so enable it or add an external pullup. |
| 40 | GPIO32 | bidirectional | General-purpose input/output 32 (muxed peripheral functions). |
| 41 | GPIO18_X2 | bidirectional | General-purpose input/output 18, or crystal oscillator output X2 in ALT function (also SPI-A clock, CAN-A RX, ePWM-6 A, I2C-A SCL, XCLKOUT). |
| 42 | GPIO19_X1 | bidirectional | General-purpose input/output 19, or crystal oscillator input / single-ended 3.3-V clock input X1 in ALT function (also SPI-A STE, CAN-A TX, ePWM-6 B, I2C-A SDA). |
| 43 | VDDIO | power_in | 3.3-V digital I/O power pin; place a minimum 0.1-µF decoupling capacitor on each pin plus about 20 µF shared bulk capacitance. |
| 44 | VDD | power_in | 1.2-V digital logic power pin; place a decoupling capacitor near each VDD pin (about 10 µF total) and connect all VDD pins together. |
| 45 | VSS | power_in | Digital ground; must be connected to board ground. |
| 46 | GPIO39 | bidirectional | General-purpose input/output 39 (muxed peripheral functions). |
| 47 | GPIO8 | bidirectional | General-purpose input/output 8 (muxed peripheral functions). |
| 48 | GPIO4 | bidirectional | General-purpose input/output 4 (muxed peripheral functions). |
| 49 | GPIO3 | bidirectional | General-purpose input/output 3 (muxed peripheral functions). |
| 50 | GPIO2 | bidirectional | General-purpose input/output 2 (muxed peripheral functions). |
| 51 | GPIO1 | bidirectional | General-purpose input/output 1 (muxed peripheral functions). |
| 52 | GPIO0 | bidirectional | General-purpose input/output 0 (muxed peripheral functions). |
| 53 | GPIO40 | bidirectional | General-purpose input/output 40 (muxed peripheral functions). |
| 54 | GPIO23 | bidirectional | General-purpose input/output 23 (muxed eQEP-1 index, SPI-B STE, LIN-A RX, LIN-B RX, ePWM-4 B, HIC functions). |
| 55 | GPIO41 | bidirectional | General-purpose input/output 41 (muxed peripheral functions). |
| 56 | GPIO22 | bidirectional | General-purpose input/output 22 (muxed eQEP-1 strobe, SPI-B clock, LIN-A TX, LIN-B TX, ePWM-4 A, HIC functions). |
| 57 | GPIO7 | bidirectional | General-purpose input/output 7 (muxed peripheral functions). |
| 58 | VSS | power_in | Digital ground; must be connected to board ground. |
| 59 | VDD | power_in | 1.2-V digital logic power pin; place a decoupling capacitor near each VDD pin (about 10 µF total) and connect all VDD pins together. |
| 60 | VDDIO | power_in | 3.3-V digital I/O power pin; place a minimum 0.1-µF decoupling capacitor on each pin plus about 20 µF shared bulk capacitance. |
| 61 | GPIO5 | bidirectional | General-purpose input/output 5 (muxed peripheral functions). |
| 62 | GPIO9 | bidirectional | General-purpose input/output 9 (muxed peripheral functions). |
| 63 | GPIO10 | bidirectional | General-purpose input/output 10 (muxed peripheral functions). |
| 64 | GPIO6 | bidirectional | General-purpose input/output 6 (muxed peripheral functions). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDDIO/VDDA supply voltage, BOR disabled | VDDIO, VDDA | 2.8 | 3.3 | 3.63 | V | Internal BOR disabled | 53 |
| VDDIO/VDDA supply voltage, BOR enabled | VDDIO, VDDA | | 3.3 | 3.63 | V | Internal BOR enabled; min is VBOR-VDDIO(MAX) + VBOR-GB | 53 |
| Supply ramp rate | SRSUPPLY | 20 | | 100 | mV/us | VDDIO, VDDA with respect to VSS | 53 |
| VDDIO supply ramp time | tVDDIO-RAMP | 10 | | | ms | 1 V to VBOR-VDDIO(MAX) | 53 |
| Digital input voltage | VIN | -0.3 | | | V | VSS, 0.3 min; VDDIO + 0.3 max | 53 |
| VDDIO BOR guard band | VBOR-GB | | 0.1 | | V | | 53 |
| Junction temperature, S version | TJ | -40 | | 125 | °C | S version | 53 |
| Free-air temperature, Q version | TA | -40 | | 125 | °C | Q version (AEC Q100) | 53 |
| Supply voltage VDDIO | VDDIO | -0.3 | | 4.6 | V | with respect to VSS | 52 |
| Supply voltage VDDA | VDDA | -0.3 | | 4.6 | V | with respect to VSSA | 52 |
| Input voltage | VIN | -0.3 | | 4.6 | V | 3.3 V | 52 |
| Output voltage | VO | -0.3 | | 4.6 | V | | 52 |
| Input clamp current per pin | IIK | -20 | | 20 | mA | Digital/analog input, VIN < VSS/VSSA or VIN > VDDIO/VDDA | 52 |
| Input clamp current total | IIKTOTAL | -20 | | 20 | mA | Total for all inputs, VIN < VSS/VSSA or VIN > VDDIO/VDDA | 52 |
| Digital output current per pin | IOUT | -20 | | 20 | mA | | 52 |
| Free-air temperature | TA | -40 | | 125 | °C | | 52 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 52 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 52 |
| Low-level output voltage | VOL | | | 0.4 | V | IOL = IOL MAX | 59 |
| Low-level output voltage | VOL | | | 0.2 | V | IOL = 100 µA | 59 |
| High-level output source current for all output pins | IOH | -4 | | | mA | | 59 |
| Low-level output sink current for all output pins | IOL | | | 4 | mA | | 59 |
| High-level output impedance for all output pins | ROH | 45 | 65 | 100 | Ω | | 59 |
| Low-level output impedance for all output pins | ROL | 45 | 60 | 90 | Ω | | 59 |
| High-level input voltage | VIH | 2 | | | V | | 59 |
| Low-level input voltage | VIL | | | 0.8 | V | | 59 |
| Input hysteresis | VHYSTERESIS | | 125 | | mV | | 59 |
| Input current, pins with pulldown | IPULLDOWN | | | 120 | µA | VDDIO = 3.3 V, VIN = VDDIO | 59 |
| Input current, digital inputs with pullup enabled | IPULLUP | | | 160 | µA | VDDIO = 3.3 V, VIN = 0 V | 59 |
| Pin leakage, digital inputs | ILEAK | | | 0.1 | µA | Pullups and outputs disabled, 0 V ≤ VIN ≤ VDDIO | 59 |
| Pin leakage, analog pins (except ADCINA3/VDAC) | ILEAK | | | 0.1 | µA | Analog drivers disabled, 0 V ≤ VIN ≤ VDDA | 59 |
| Input capacitance, digital inputs | CI | | 2 | | pF | Digital inputs | 59 |
| VDDIO brown out reset voltage | VBOR-VDDIO | 2.81 | | 3 | V | | 59 |
| Internal voltage regulator output | VVREG | 1.14 | 1.2 | 1.32 | V | | 59 |
| VDDIO current, operational | IDDIO | | 35 | 72 | mA | Operating mode; TYP at Vnom, 30℃ | 55 |
| VDDA current, operational | IDDA | | 3 | 5 | mA | Operating mode; TYP at Vnom, 30℃ | 55 |
| VDDIO current, Idle mode | IDDIO | | 16 | 33 | mA | CPU in IDLE, flash powered down, XCLKOUT off, pull up enabled | 55 |
| VDDIO current, Standby mode | IDDIO | | 8 | 22 | mA | CPU in STANDBY, flash powered down, XCLKOUT off, pull up enabled | 55 |
| VDDIO current, Halt mode | IDDIO | | 1 | 16 | mA | CPU in HALT, flash powered down, XCLKOUT off, pull up enabled | 55 |
| VDDIO current, flash erase/program | IDDIO | | 72 | 106 | mA | CPU running from RAM, SYSCLK at 100 MHz, I/Os inputs with pullups, peripheral clocks off | 55 |
| INTOSC frequency | fINTOSC | 9.8 | 10 | 10.15 | MHz | -40°C to 125°C | 73 |
| INTOSC frequency | fINTOSC | 9.85 | 10 | 10.15 | MHz | -30°C to 90°C | 73 |
| System clock frequency | f(SYSCLK) | 2 | | 100 | MHz | | 70 |
| ADC gain error, internal reference | | -45 | | 45 | LSB | Internal reference | 100 |
| ADC gain error, external reference | | -5 | 3 | 5 | LSB | External reference; typ printed as ±3 | 100 |
| ADC offset error | | -5 | 2 | 5 | LSB | typ printed as ±2 | 100 |
| ADC INL error | INL | -2 | 1 | 2 | LSB | typ printed as ±1.0 | 100 |
| Temperature sensor accuracy | Tacc | -15 | | 15 | °C | External reference | 104 |
| Junction-to-case thermal resistance, PM package | RΘJC | | 12.4 | | °C/W | | 60 |
| Junction-to-board thermal resistance, PM package | RΘJB | | 25.6 | | °C/W | | 60 |
| Junction-to-free air thermal resistance, PM package | RΘJA | | 51.8 | | °C/W | High k PCB, airflow 0 lfm | 60 |
## CAD (KiCad official)
- Symbol: `F280023CPMSR`
- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`
- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `f280023cpmsr-etched.step` / `f280023cpmsr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `f280023cpmsr.step` / `f280023cpmsr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/f280023cpmsr.pdf) (208 pp, sha256 `811491748b698c36`, retrieved 2026-11-13, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/f280023cpmsr-datasheet.pdf)