component
F280021PTQR
Public Made by Adomby adom
Texas Instruments Digital Signal Processors / Controllers (DSPs/DSCs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
fc172fa
F280021PTQR
Texas Instruments · Digital Signal Processors / Controllers (DSPs/DSCs) · LQFP-48(7x7)
F280021PTQR from Texas Instruments, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO29 | bidirectional | General-purpose I/O 29 with mux options including SCIA_TX, EPWM7_B, ERRORSTS (needs external pull-down when used) and HIC_NCS. |
| 2 | GPIO28 | bidirectional | General-purpose I/O 28 with mux options including SCIA_RX, EPWM7_A, ERRORSTS (needs external pull-down when used) and HIC_NOE. |
| 3 | XRSn | bidirectional | Open-drain device reset input and watchdog reset output with internal pull-up; place 2.2kΩ to 10kΩ to VDDIO and at most 100nF to VSS. |
| 4 | A6,C6 | input | Analog input shared by A6 and C6 (also CMP1_HP2/LP2, CMP3_HP0/LP0, AIO228/AIO226, HIC_A0/HIC_A1). |
| 5 | A3,C5,VDAC | input | ADC-A input 3 / ADC-C input 5 / optional external CMPSS DAC reference with a non-removable internal capacitor to VSSA; place at least 1µF when used as VDAC. |
| 6 | A2,C9 | input | ADC-A input 2 / ADC-C input 9, also CMP1_HP0/LP0 and AIO224. |
| 7 | A15,C7 | input | ADC-A input 15 / ADC-C input 7, also CMP1_HP3/HN0/LP3/LN0 and AIO233. |
| 8 | A11,C0 | input | ADC-A input 11 / ADC-C input 0, also CMP1_HP1/HN1/LP1/LN1 and AIO237. |
| 9 | A5,C2 | input | ADC-A input 5 / ADC-C input 2, also CMP3_HP1/HN1/LP1/LN1 and AIO244. |
| 10 | A1 | input | Analog input 1, also CMP1_HP4/LP4 and AIO232. |
| 11 | A0,C15 | input | ADC-A input 0 / ADC-C input 15, also CMP3_HP2/LP2 and AIO231. |
| 12 | VREFHI | input | ADC high reference voltage, driven externally or by the device in internal-reference mode; place at least 2.2µF between VREFHI and VREFLO close to the device. |
| 13 | VREFLO | input | ADC low reference voltage. |
| 14 | A12,C1 | input | ADC-A input 12 / ADC-C input 1, also CMP2/CMP4 inputs and AIO238. |
| 15 | A7,C3 | input | ADC-A input 7 / ADC-C input 3, also CMP4_HP1/HN1/LP1/LN1 and AIO245. |
| 16 | A8,C11 | input | ADC-A input 8 / ADC-C input 11, also CMP2_HP4/CMP4_HP4 and AIO241. |
| 17 | VSSA | power_in | Analog ground. |
| 18 | VDDA | power_in | 3.3V analog supply; place a decoupling capacitor of at least 2.2µF on each pin. |
| 19 | A4,C14 | input | ADC-A input 4 / ADC-C input 14, also CMP2/CMP4 inputs and AIO225. |
| 20 | A9,C8 | input | ADC-A input 9 / ADC-C input 8, also CMP2_HP2/CMP4_HP0 and AIO227. |
| 21 | A10,C10 | input | ADC-A input 10 / ADC-C input 10, also CMP2_HP3/HN0/LP3/LN0 and AIO230. |
| 22 | VSS | power_in | Digital ground; must be connected to board ground. |
| 23 | GPIO13 | bidirectional | General-purpose I/O 13 with mux options including EPWM7_B, EQEP1_INDEX, PMBUSA_ALERT and LINB_RX. |
| 24 | GPIO12 | bidirectional | General-purpose I/O 12 with mux options including EPWM7_A, EQEP1_STROBE, PMBUSA_CTL and LINB_TX. |
| 25 | GPIO33 | bidirectional | General-purpose I/O 33 with mux options including I2CA_SCL, SPIB_STE, LINA_RX and CANA_RX. |
| 26 | GPIO16 | bidirectional | General-purpose I/O 16 with mux options including SPIA_SIMO, EPWM5_A, SCIA_TX and XCLKOUT. |
| 27 | GPIO24 | bidirectional | General-purpose I/O 24 with mux options including OUTPUTXBAR1, EQEP2_A, SPIB_SIMO and ERRORSTS (needs external pull-down when used). |
| 28 | TCK | input | JTAG test clock with internal pull-up. |
| 29 | GPIO37/TDO | bidirectional | GPIO37 with default mux JTAG TDO; tri-stated without JTAG activity, so enable internal pull-up or add an external pull-up. |
| 30 | TMS | bidirectional | JTAG test mode select with internal pull-up; add an external pull-up (2.2kΩ recommended) to VDDIO to hold JTAG in reset during normal operation. |
| 31 | GPIO35/TDI | bidirectional | GPIO35 with default mux JTAG TDI; enable internal pull-up or add an external pull-up to avoid a floating input. |
| 32 | GPIO32 | bidirectional | General-purpose I/O 32 with mux options including I2CA_SDA, SPIB_CLK, LINA_TX and CANA_TX; default boot-mode select pin 0. |
| 33 | GPIO18_X2 | bidirectional | General-purpose I/O 18 or crystal oscillator output X2 (ALT); mux includes SPIA_CLK, CANA_RX and XCLKOUT. |
| 34 | GPIO19_X1 | bidirectional | General-purpose I/O 19 or crystal/single-ended 3.3V clock input X1 (ALT); mux includes SPIA_STE, CANA_TX and LINB_RX. |
| 35 | VDDIO | power_in | 3.3V digital I/O supply. |
| 36 | VDD | power_in | 1.2V digital logic supply pin, powered by the internal VREG, requiring decoupling. |
| 37 | VSS | power_in | Digital ground; must be connected to board ground. |
| 38 | GPIO4 | bidirectional | General-purpose I/O 4 with mux options including EPWM3_A, OUTPUTXBAR3, CANA_TX and SPIB_CLK. |
| 39 | GPIO3 | bidirectional | General-purpose I/O 3 with mux options including EPWM2_B, PMBUSA_SCL, SPIA_CLK, SCIA_RX and CANA_RX. |
| 40 | GPIO2 | bidirectional | General-purpose I/O 2 with mux options including EPWM2_A, PMBUSA_SDA, SPIA_SIMO, SCIA_TX and CANA_TX. |
| 41 | GPIO1 | bidirectional | General-purpose I/O 1 with mux options including EPWM1_B, I2CA_SCL, SPIA_SOMI and CLB_OUTPUTXBAR7. |
| 42 | GPIO0 | bidirectional | General-purpose I/O 0 with mux options including EPWM1_A, I2CA_SDA, SPIA_STE and FSIRXA_CLK. |
| 43 | GPIO7 | bidirectional | General-purpose I/O 7 with mux options including EPWM4_B, OUTPUTXBAR5, EQEP1_B and SPIB_SIMO. |
| 44 | VSS | power_in | Digital ground; must be connected to board ground. |
| 45 | VDD | power_in | 1.2V digital logic supply pin, powered by the internal VREG, requiring decoupling. |
| 46 | VDDIO | power_in | 3.3V digital I/O supply. |
| 47 | GPIO5 | bidirectional | General-purpose I/O 5 with mux options including EPWM3_B, OUTPUTXBAR3, CANA_RX and SPIA_STE. |
| 48 | GPIO6 | bidirectional | General-purpose I/O 6 with mux options including EPWM4_A, OUTPUTXBAR4, SYNCOUT and EQEP1_A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 VDDIO,以 VSS 为基准 | VDDIO | -0.3 | 4.6 | V | 以 VSS 为基准 | 51 | |
| 电源电压 VDDA,以 VSSA 为基准 | VDDA | -0.3 | 4.6 | V | 以 VSSA 为基准 | 51 | |
| 输入电压 (3.3V) | VIN | -0.3 | 4.6 | V | 51 | ||
| 输出电压 | VO | -0.3 | 4.6 | V | 51 | ||
| 输入钳位电流 - 每个引脚 | IIK | -20 | 20 | mA | VIN < VSS/VSSA 或 VIN > VDDIO/VDDA | 51 | |
| 输入钳位电流 - 所有输入总计 | IIKTOTAL | -20 | 20 | mA | VIN < VSS/VSSA 或 VIN > VDDIO/VDDA | 51 | |
| 输出电流 数字输出(每引脚) | IOUT | -20 | 20 | mA | 51 | ||
| 自然通风温度 | TA | -40 | 125 | °C | 51 | ||
| 工作结温 | TJ | -40 | 150 | °C | 51 | ||
| 贮存温度 | Tstg | -65 | 150 | °C | 51 | ||
| 静电放电 人体放电模型 (HBM) | V(ESD) | -2000 | 2000 | V | ANSI/ESDA/JEDEC JS-001,所有引脚,48 引脚 PT 封装,商用 | 51 | |
| 静电放电 充电器件模型 (CDM) | V(ESD) | -500 | 500 | V | ANSI/ESDA/JEDEC JS-002,所有引脚,48 引脚 PT 封装,商用 | 51 | |
| 器件电源电压 VDDIO 和 VDDA(启用内部 BOR) | VDDIO, VDDA | 3.3 | 3.63 | V | 启用内部 BOR;最小值为 VBOR-VDDIO(MAX)+VBOR-GB 表达式 | 52 | |
| 器件电源电压 VDDIO 和 VDDA(禁用内部 BOR) | VDDIO, VDDA | 2.8 | 3.3 | 3.63 | V | 禁用内部 BOR | 52 |
| VDDIO BOR 保护频带 | VBOR-GB | 0.1 | V | 52 | |||
| 结温 | TJ | -40 | 145 | °C | 52 | ||
| 自然通风温度 | TA | -40 | 125 | °C | 52 | ||
| 输出低电平电压 | VOL | 0.4 | V | IOL=IOL 最大值 | 58 | ||
| 输出低电平电压 | VOL | 0.2 | V | IOL = 100µA | 58 | ||
| 所有输出引脚的高电平输出阻抗 | ROH | 45 | 65 | 100 | Ω | 58 | |
| 所有输出引脚的低电平输出阻抗 | ROL | 45 | 60 | 90 | Ω | 58 | |
| 高电平输入电压 | VIH | 2 | V | 58 | |||
| 低电平输入电压 | VIL | 0.8 | V | 58 | |||
| 引脚漏电流 数字输入 | ILEAK | 0.1 | µA | 上拉和输出被禁用,0V ≤ VIN ≤ VDDIO | 58 | ||
| VDDIO 欠压复位电压 | VBOR-VDDIO | 2.81 | 3 | V | 58 | ||
| 内部稳压器输出 | VVREG | 1.14 | 1.2 | 1.32 | V | 58 | |
| ADCCLK(源自 PERx.SYSCLK) | ADCCLK | 5 | 50 | MHz | 111 | ||
| 增益误差 外部基准 | -5 | 3 | 5 | LSB | 外部基准 | 112 | |
| 增益误差 内部基准电压 | -45 | 45 | LSB | 内部基准电压 | 112 | ||
| 偏移量误差 | -5 | 2 | 5 | LSB | 112 | ||
| DNL 误差 | -1 | 0.5 | 1 | LSB | 112 | ||
| INL 误差 | -2 | 1 | 2 | LSB | 112 | ||
| 以输入为基准的失调电压误差 | -20 | 20 | mV | 低共模,反相输入设置为 50mV | 119 | ||
| 迟滞 1x | 4 | 12 | 20 | LSB | 1x | 119 | |
| 迟滞 2x | 17 | 24 | 33 | LSB | 2x | 119 | |
| 迟滞 3x | 25 | 36 | 50 | LSB | 3x | 119 | |
| 迟滞 4x | 30 | 48 | 67 | LSB | 4x | 119 | |
| 静态失调电压误差 | -25 | 25 | mV | CMPSS DAC 静态 | 120 | ||
| 静态增益误差 | -2 | 2 | FSR 百分比 | CMPSS DAC 静态 | 120 | ||
| 静态 DNL 更正了终点 | -1 | 4 | LSB | CMPSS DAC 静态 | 120 | ||
| 静态 INL 更正了终点 | -16 | 16 | LSB | CMPSS DAC 静态 | 120 | ||
| VDAC 负载 | 6 | 8 | 10 | kΩ | 当 VDAC 为基准时 | 120 | |
| 有效低电平输入电压 (PMBus) | VIL | 0.8 | V | PMBus | 145 | ||
| 有效高电平输入电压 (PMBus) | VIH | 2.1 | V | PMBus | 145 | ||
| 低电平输出电压 (PMBus) | VOL | 0.4 | V | 在 Ipullup = 4mA 时 | 145 | ||
| 每个引脚上的输入漏电流 (PMBus) | Ii | -10 | 10 | µA | 0.1Vbus < Vi < 0.9Vbus | 145 | |
| SCL 时钟频率 快速模式 | fSCL | 10 | 400 | kHz | PMBus 快速模式 | 145 | |
| SCL 时钟频率 标准模式 | fSCL | 10 | 100 | kHz | PMBus 标准模式 | 146 |
CAD (KiCad official)
- Symbol:
F280021PTQR - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
f280021ptqr-etched.step/f280021ptqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);f280021ptqr.step/f280021ptqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (245 pp, sha256
0723d8e3e09e1f8b, retrieved 2026-11-09, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# F280021PTQR
**Texas Instruments** · Digital Signal Processors / Controllers (DSPs/DSCs) · LQFP-48(7x7)
F280021PTQR from Texas Instruments, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO29 | bidirectional | General-purpose I/O 29 with mux options including SCIA_TX, EPWM7_B, ERRORSTS (needs external pull-down when used) and HIC_NCS. |
| 2 | GPIO28 | bidirectional | General-purpose I/O 28 with mux options including SCIA_RX, EPWM7_A, ERRORSTS (needs external pull-down when used) and HIC_NOE. |
| 3 | XRSn | bidirectional | Open-drain device reset input and watchdog reset output with internal pull-up; place 2.2kΩ to 10kΩ to VDDIO and at most 100nF to VSS. |
| 4 | A6,C6 | input | Analog input shared by A6 and C6 (also CMP1_HP2/LP2, CMP3_HP0/LP0, AIO228/AIO226, HIC_A0/HIC_A1). |
| 5 | A3,C5,VDAC | input | ADC-A input 3 / ADC-C input 5 / optional external CMPSS DAC reference with a non-removable internal capacitor to VSSA; place at least 1µF when used as VDAC. |
| 6 | A2,C9 | input | ADC-A input 2 / ADC-C input 9, also CMP1_HP0/LP0 and AIO224. |
| 7 | A15,C7 | input | ADC-A input 15 / ADC-C input 7, also CMP1_HP3/HN0/LP3/LN0 and AIO233. |
| 8 | A11,C0 | input | ADC-A input 11 / ADC-C input 0, also CMP1_HP1/HN1/LP1/LN1 and AIO237. |
| 9 | A5,C2 | input | ADC-A input 5 / ADC-C input 2, also CMP3_HP1/HN1/LP1/LN1 and AIO244. |
| 10 | A1 | input | Analog input 1, also CMP1_HP4/LP4 and AIO232. |
| 11 | A0,C15 | input | ADC-A input 0 / ADC-C input 15, also CMP3_HP2/LP2 and AIO231. |
| 12 | VREFHI | input | ADC high reference voltage, driven externally or by the device in internal-reference mode; place at least 2.2µF between VREFHI and VREFLO close to the device. |
| 13 | VREFLO | input | ADC low reference voltage. |
| 14 | A12,C1 | input | ADC-A input 12 / ADC-C input 1, also CMP2/CMP4 inputs and AIO238. |
| 15 | A7,C3 | input | ADC-A input 7 / ADC-C input 3, also CMP4_HP1/HN1/LP1/LN1 and AIO245. |
| 16 | A8,C11 | input | ADC-A input 8 / ADC-C input 11, also CMP2_HP4/CMP4_HP4 and AIO241. |
| 17 | VSSA | power_in | Analog ground. |
| 18 | VDDA | power_in | 3.3V analog supply; place a decoupling capacitor of at least 2.2µF on each pin. |
| 19 | A4,C14 | input | ADC-A input 4 / ADC-C input 14, also CMP2/CMP4 inputs and AIO225. |
| 20 | A9,C8 | input | ADC-A input 9 / ADC-C input 8, also CMP2_HP2/CMP4_HP0 and AIO227. |
| 21 | A10,C10 | input | ADC-A input 10 / ADC-C input 10, also CMP2_HP3/HN0/LP3/LN0 and AIO230. |
| 22 | VSS | power_in | Digital ground; must be connected to board ground. |
| 23 | GPIO13 | bidirectional | General-purpose I/O 13 with mux options including EPWM7_B, EQEP1_INDEX, PMBUSA_ALERT and LINB_RX. |
| 24 | GPIO12 | bidirectional | General-purpose I/O 12 with mux options including EPWM7_A, EQEP1_STROBE, PMBUSA_CTL and LINB_TX. |
| 25 | GPIO33 | bidirectional | General-purpose I/O 33 with mux options including I2CA_SCL, SPIB_STE, LINA_RX and CANA_RX. |
| 26 | GPIO16 | bidirectional | General-purpose I/O 16 with mux options including SPIA_SIMO, EPWM5_A, SCIA_TX and XCLKOUT. |
| 27 | GPIO24 | bidirectional | General-purpose I/O 24 with mux options including OUTPUTXBAR1, EQEP2_A, SPIB_SIMO and ERRORSTS (needs external pull-down when used). |
| 28 | TCK | input | JTAG test clock with internal pull-up. |
| 29 | GPIO37/TDO | bidirectional | GPIO37 with default mux JTAG TDO; tri-stated without JTAG activity, so enable internal pull-up or add an external pull-up. |
| 30 | TMS | bidirectional | JTAG test mode select with internal pull-up; add an external pull-up (2.2kΩ recommended) to VDDIO to hold JTAG in reset during normal operation. |
| 31 | GPIO35/TDI | bidirectional | GPIO35 with default mux JTAG TDI; enable internal pull-up or add an external pull-up to avoid a floating input. |
| 32 | GPIO32 | bidirectional | General-purpose I/O 32 with mux options including I2CA_SDA, SPIB_CLK, LINA_TX and CANA_TX; default boot-mode select pin 0. |
| 33 | GPIO18_X2 | bidirectional | General-purpose I/O 18 or crystal oscillator output X2 (ALT); mux includes SPIA_CLK, CANA_RX and XCLKOUT. |
| 34 | GPIO19_X1 | bidirectional | General-purpose I/O 19 or crystal/single-ended 3.3V clock input X1 (ALT); mux includes SPIA_STE, CANA_TX and LINB_RX. |
| 35 | VDDIO | power_in | 3.3V digital I/O supply. |
| 36 | VDD | power_in | 1.2V digital logic supply pin, powered by the internal VREG, requiring decoupling. |
| 37 | VSS | power_in | Digital ground; must be connected to board ground. |
| 38 | GPIO4 | bidirectional | General-purpose I/O 4 with mux options including EPWM3_A, OUTPUTXBAR3, CANA_TX and SPIB_CLK. |
| 39 | GPIO3 | bidirectional | General-purpose I/O 3 with mux options including EPWM2_B, PMBUSA_SCL, SPIA_CLK, SCIA_RX and CANA_RX. |
| 40 | GPIO2 | bidirectional | General-purpose I/O 2 with mux options including EPWM2_A, PMBUSA_SDA, SPIA_SIMO, SCIA_TX and CANA_TX. |
| 41 | GPIO1 | bidirectional | General-purpose I/O 1 with mux options including EPWM1_B, I2CA_SCL, SPIA_SOMI and CLB_OUTPUTXBAR7. |
| 42 | GPIO0 | bidirectional | General-purpose I/O 0 with mux options including EPWM1_A, I2CA_SDA, SPIA_STE and FSIRXA_CLK. |
| 43 | GPIO7 | bidirectional | General-purpose I/O 7 with mux options including EPWM4_B, OUTPUTXBAR5, EQEP1_B and SPIB_SIMO. |
| 44 | VSS | power_in | Digital ground; must be connected to board ground. |
| 45 | VDD | power_in | 1.2V digital logic supply pin, powered by the internal VREG, requiring decoupling. |
| 46 | VDDIO | power_in | 3.3V digital I/O supply. |
| 47 | GPIO5 | bidirectional | General-purpose I/O 5 with mux options including EPWM3_B, OUTPUTXBAR3, CANA_RX and SPIA_STE. |
| 48 | GPIO6 | bidirectional | General-purpose I/O 6 with mux options including EPWM4_A, OUTPUTXBAR4, SYNCOUT and EQEP1_A. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 VDDIO,以 VSS 为基准 | VDDIO | -0.3 | | 4.6 | V | 以 VSS 为基准 | 51 |
| 电源电压 VDDA,以 VSSA 为基准 | VDDA | -0.3 | | 4.6 | V | 以 VSSA 为基准 | 51 |
| 输入电压 (3.3V) | VIN | -0.3 | | 4.6 | V | | 51 |
| 输出电压 | VO | -0.3 | | 4.6 | V | | 51 |
| 输入钳位电流 - 每个引脚 | IIK | -20 | | 20 | mA | VIN < VSS/VSSA 或 VIN > VDDIO/VDDA | 51 |
| 输入钳位电流 - 所有输入总计 | IIKTOTAL | -20 | | 20 | mA | VIN < VSS/VSSA 或 VIN > VDDIO/VDDA | 51 |
| 输出电流 数字输出(每引脚) | IOUT | -20 | | 20 | mA | | 51 |
| 自然通风温度 | TA | -40 | | 125 | °C | | 51 |
| 工作结温 | TJ | -40 | | 150 | °C | | 51 |
| 贮存温度 | Tstg | -65 | | 150 | °C | | 51 |
| 静电放电 人体放电模型 (HBM) | V(ESD) | -2000 | | 2000 | V | ANSI/ESDA/JEDEC JS-001,所有引脚,48 引脚 PT 封装,商用 | 51 |
| 静电放电 充电器件模型 (CDM) | V(ESD) | -500 | | 500 | V | ANSI/ESDA/JEDEC JS-002,所有引脚,48 引脚 PT 封装,商用 | 51 |
| 器件电源电压 VDDIO 和 VDDA(启用内部 BOR) | VDDIO, VDDA | | 3.3 | 3.63 | V | 启用内部 BOR;最小值为 VBOR-VDDIO(MAX)+VBOR-GB 表达式 | 52 |
| 器件电源电压 VDDIO 和 VDDA(禁用内部 BOR) | VDDIO, VDDA | 2.8 | 3.3 | 3.63 | V | 禁用内部 BOR | 52 |
| VDDIO BOR 保护频带 | VBOR-GB | | 0.1 | | V | | 52 |
| 结温 | TJ | -40 | | 145 | °C | | 52 |
| 自然通风温度 | TA | -40 | | 125 | °C | | 52 |
| 输出低电平电压 | VOL | | | 0.4 | V | IOL=IOL 最大值 | 58 |
| 输出低电平电压 | VOL | | | 0.2 | V | IOL = 100µA | 58 |
| 所有输出引脚的高电平输出阻抗 | ROH | 45 | 65 | 100 | Ω | | 58 |
| 所有输出引脚的低电平输出阻抗 | ROL | 45 | 60 | 90 | Ω | | 58 |
| 高电平输入电压 | VIH | 2 | | | V | | 58 |
| 低电平输入电压 | VIL | | | 0.8 | V | | 58 |
| 引脚漏电流 数字输入 | ILEAK | | | 0.1 | µA | 上拉和输出被禁用,0V ≤ VIN ≤ VDDIO | 58 |
| VDDIO 欠压复位电压 | VBOR-VDDIO | 2.81 | | 3 | V | | 58 |
| 内部稳压器输出 | VVREG | 1.14 | 1.2 | 1.32 | V | | 58 |
| ADCCLK(源自 PERx.SYSCLK) | ADCCLK | 5 | | 50 | MHz | | 111 |
| 增益误差 外部基准 | | -5 | 3 | 5 | LSB | 外部基准 | 112 |
| 增益误差 内部基准电压 | | -45 | | 45 | LSB | 内部基准电压 | 112 |
| 偏移量误差 | | -5 | 2 | 5 | LSB | | 112 |
| DNL 误差 | | -1 | 0.5 | 1 | LSB | | 112 |
| INL 误差 | | -2 | 1 | 2 | LSB | | 112 |
| 以输入为基准的失调电压误差 | | -20 | | 20 | mV | 低共模,反相输入设置为 50mV | 119 |
| 迟滞 1x | | 4 | 12 | 20 | LSB | 1x | 119 |
| 迟滞 2x | | 17 | 24 | 33 | LSB | 2x | 119 |
| 迟滞 3x | | 25 | 36 | 50 | LSB | 3x | 119 |
| 迟滞 4x | | 30 | 48 | 67 | LSB | 4x | 119 |
| 静态失调电压误差 | | -25 | | 25 | mV | CMPSS DAC 静态 | 120 |
| 静态增益误差 | | -2 | | 2 | FSR 百分比 | CMPSS DAC 静态 | 120 |
| 静态 DNL 更正了终点 | | -1 | | 4 | LSB | CMPSS DAC 静态 | 120 |
| 静态 INL 更正了终点 | | -16 | | 16 | LSB | CMPSS DAC 静态 | 120 |
| VDAC 负载 | | 6 | 8 | 10 | kΩ | 当 VDAC 为基准时 | 120 |
| 有效低电平输入电压 (PMBus) | VIL | | | 0.8 | V | PMBus | 145 |
| 有效高电平输入电压 (PMBus) | VIH | 2.1 | | | V | PMBus | 145 |
| 低电平输出电压 (PMBus) | VOL | | | 0.4 | V | 在 Ipullup = 4mA 时 | 145 |
| 每个引脚上的输入漏电流 (PMBus) | Ii | -10 | | 10 | µA | 0.1Vbus < Vi < 0.9Vbus | 145 |
| SCL 时钟频率 快速模式 | fSCL | 10 | | 400 | kHz | PMBus 快速模式 | 145 |
| SCL 时钟频率 标准模式 | fSCL | 10 | | 100 | kHz | PMBus 标准模式 | 146 |
## CAD (KiCad official)
- Symbol: `F280021PTQR`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `f280021ptqr-etched.step` / `f280021ptqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `f280021ptqr.step` / `f280021ptqr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tms320f280021-q1) (245 pp, sha256 `0723d8e3e09e1f8b`, retrieved 2026-11-09, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/f280021ptqr-datasheet.pdf)