component
F2800156QRHBRQ1
Public Made by Adomby adom
Texas Instruments , VQFN-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
77ec093
F2800156QRHBRQ1
Texas Instruments · IC · VQFN-32(5x5)
F2800156QRHBRQ1 from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | XRSn | bidirectional | Device reset pin with an always-active internal pullup; its description row is not in the supplied pages. |
| 2 | A6,C6,GPIO226,GPIO228 | bidirectional | Bonded pin combining ADC inputs A6 and C6 with GPIO226 and GPIO228; if both GPIOs are outputs, GPIO226 automatically changes to an input to prevent contention. |
| 3 | A3/C5,GPIO242 | bidirectional | ADC-A input 3 and ADC-C input 5 (with CMPSS-3 inputs), shared with GPIO242 which has full digital input/output. |
| 4 | A2/C9,GPIO224 | bidirectional | ADC-A input 2 and ADC-C input 9 (with CMPSS-1 inputs), shared with GPIO224 which has full digital input/output. |
| 5 | A15/C7,C4/A14 | input | Bonded analog pin combining ADC inputs A15, C7, C4 and A14 (A15/C7 AIO233, A14/C4 AIO239). |
| 6 | A11/C0,A5/C2 | input | Bonded analog pin combining ADC inputs A11, C0, A5 and C2 (digital input AIO237/AIO244). |
| 7 | A0/C15/CMP1_DACL,A1 | input | Bonded analog pin combining ADC inputs A0, C15 and A1 with the CMPSS-1 low DAC output (digital input AIO231/AIO232). |
| 8 | A12/C1,A7/C3 | input | Bonded analog pin combining ADC inputs A12, C1, A7 and C3 (digital input AIO238/AIO245). |
| 9 | A8/C11 | input | ADC-A input 8 and ADC-C input 11 (digital input AIO241). |
| 10 | VSSA | power_in | Analog ground; tie to VSS if no separate analog ground is used, and on this package VREFLO is internally tied to it. |
| 11 | VDDA | power_in | 3.3-V analog power pin needing a minimum 2.2-uF decoupling capacitor; VREFHI is internally tied to VDDA on this package. |
| 12 | A4/C14 | input | ADC-A input 4 and ADC-C input 14 with CMPSS-2/4 inputs (digital input AIO225). |
| 13 | A10/C10,C8/A9,GPIO227,GPIO230 | bidirectional | Bonded pin combining ADC inputs A10, C10, C8, A9 with GPIO227 and GPIO230; if both GPIOs are outputs, GPIO227 automatically changes to an input to prevent contention. |
| 14 | GPIO11 | bidirectional | General-purpose input/output 11 with muxed ePWM6_B, CANA_RX, SCIB_RX, SPIA and eQEP functions. |
| 15 | GPIO24 | bidirectional | General-purpose input/output 24 with muxed OUTPUTXBAR1, SPIA_STE, EPWM4_A and ERRORSTS (requires external pulldown) functions. |
| 16 | TCK | input | JTAG test clock input with an always-active internal pullup; use a pullup resistor or leave unconnected if unused. |
| 17 | GPIO37/TDO | bidirectional | JTAG TDO by default (tri-stated when no JTAG activity); enable internal pullup or add an external pullup to avoid a floating input. |
| 18 | TMS | input | JTAG test mode select input with an always-active internal pullup; use a pullup resistor if unused. |
| 19 | GPIO35/TDI | bidirectional | JTAG TDI by default with internal pullup disabled; enable the internal pullup or add an external pullup to avoid a floating input. |
| 20 | GPIO32 | bidirectional | General-purpose input/output 32 (digital mux pin). |
| 21 | GPIO18/X2 | bidirectional | GPIO18 or crystal oscillator output X2; also SPIA_CLK, XCLKOUT and other mux functions. |
| 22 | GPIO19/X1 | bidirectional | GPIO19 or crystal oscillator input X1 / single-ended 3.3-V clock input; also ExtR external resistor for the internal oscillator. |
| 23 | VDDIO | power_in | 3.3-V digital I/O power pin; all VDDIO pins must be connected. |
| 24 | VDD | power_in | 1.2-V digital logic power pin; must be connected and not used to bias external circuits. |
| 25 | VREGENZ | input | Internal voltage regulator enable with internal pulldown; tie low to VSS to enable internal VREG, or high to VDDIO to use an external supply. |
| 26 | GPIO3 | bidirectional | General-purpose input/output 3; located near the PMM, so avoid negative noise below VSS - 0.3 V. |
| 27 | GPIO1 | bidirectional | General-purpose input/output 1; located near the PMM, so avoid negative noise below VSS - 0.3 V. |
| 28 | GPIO0 | bidirectional | General-purpose input/output 0; located near the PMM, so avoid negative noise below VSS - 0.3 V. |
| 29 | GPIO7 | bidirectional | General-purpose input/output 7 (digital mux pin). |
| 30 | GPIO5 | bidirectional | General-purpose input/output 5 (digital mux pin). |
| 31 | GPIO29 | bidirectional | General-purpose input/output 29 (digital mux pin). |
| 32 | A16/C16,GPIO28 | bidirectional | ADC-A input 16 and ADC-C input 16, shared with GPIO28 which has full digital input/output. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD with respect to VSS | VDD | -0.3 | 1.5 | V | 47 | ||
| Supply voltage VDDIO with respect to VSS | VDDIO | -0.3 | 4.6 | V | 47 | ||
| Supply voltage VDDA with respect to VSSA | VDDA | -0.3 | 4.6 | V | 47 | ||
| Input voltage | VIN | -0.3 | 4.6 | V | 3.3 V | 47 | |
| Output voltage | VO | -0.3 | 4.6 | V | 47 | ||
| Input clamp current per pin | IIK | -20 | 20 | mA | VIN < VSS/VSSA or VIN > VDDIO/VDDA | 47 | |
| Input clamp current total for all pins | IIKTOTAL | -20 | 20 | mA | VIN < VSS/VSSA or VIN > VDDIO/VDDA | 47 | |
| Digital output current per pin | IOUT | -20 | 20 | mA | 47 | ||
| Operating junction temperature | TJ | -40 | 155 | °C | 47 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 47 | ||
| Device supply voltage VDDIO and VDDA, internal BOR disabled | VDDIO, VDDA | 2.8 | 3.3 | 3.63 | V | Internal BOR disabled | 48 |
| Device supply voltage VDDIO and VDDA, internal BOR enabled | VDDIO, VDDA | 3.3 | 3.63 | V | Internal BOR enabled; min is VBOR-VDDIO(MAX) + VBOR-GB | 48 | |
| Device supply voltage VDD | VDD | 1.14 | 1.2 | 1.32 | V | 48 | |
| Digital input voltage | VIN | -0.3 | V | VSS, 0.3 to VDDIO + 0.3 | 48 | ||
| Analog input voltage | VIN | -0.3 | V | VSSA, 0.3 to VDDA + 0.3 | 48 | ||
| Junction temperature | TJ | -40 | 140 | °C | F280015xS, F280015xQ parts | 48 | |
| Free-air temperature | TA | -40 | 125 | °C | F280015xS, F280015xQ parts | 48 | |
| High-level output impedance | ROH | 50 | 65 | 96 | Ω | VOH=VDDS-0.4V | 59 |
| Low-level output impedance | ROL | 48 | 60 | 84 | Ω | VOL=0.4V | 59 |
| Weak pulldown resistance | RPULLDOWN | 22.66 | 31.49 | 61.55 | kΩ | 59 | |
| Weak pullup resistance | RPULLUP | 19.89 | 29.45 | 53.63 | kΩ | 59 | |
| High-level output source current for all output pins | IOH | -4 | mA | 59 | |||
| Low-level output sink current for all output pins | IOL | 4 | mA | 59 | |||
| High-level input voltage | VIH | 2 | V | 59 | |||
| Low-level input voltage | VIL | 0.8 | V | 59 | |||
| Low-level output voltage | VOL | 0.4 | V | IOL = IOL MAX | 59 | ||
| Low-level output voltage | VOL | 0.2 | V | IOL = 100 µA | 59 | ||
| Pulldown input current | IPULLDOWN | 120 | µA | VDDIO = 3.3 V, VIN = VDDIO | 59 | ||
| Pullup input current | IPULLUP | 160 | µA | VDDIO = 3.3 V, VIN = 0 V | 59 | ||
| Pin leakage digital inputs | ILEAK | 0.1 | µA | Pullups and outputs disabled, 0 V ≤ VIN ≤ VDDIO | 59 | ||
| Pin leakage analog pins | ILEAK | 0.1 | µA | Analog drivers disabled, 0 V ≤ VIN ≤ VDDA | 59 | ||
| Internal voltage regulator output | VVREG | 1.152 | 1.2 | 1.248 | V | 71 | |
| VDDIO brown out reset voltage on ramp down | VBOR-VDDIO-DOWN | 2.81 | 3 | V | After XRSn release | 71 | |
| Internal voltage regulator inrush current | VVREG-INRUSH | 650 | mA | 71 | |||
| Supply ramp rate of 3.3V rails | SRVDD33 | 20 | 100 | mV/us | VDDIO, VDDA | 71 | |
| Total VDD capacitance, internal VREG | CVDD TOTAL | 10 | 22 | uF | Internal VREG | 71 | |
| System clock frequency | f(SYSCLK) | 2 | 120 | MHz | 80 | ||
| Junction-to-case thermal resistance, top (RHB) | RΘJC | 20.7 | °C/W | 61 | |||
| Junction-to-case thermal resistance, bottom (RHB) | RΘJC | 2.3 | °C/W | 61 | |||
| Junction-to-board thermal resistance (RHB) | RΘJB | 11.3 | °C/W | 61 | |||
| Junction-to-free air thermal resistance (RHB) | RΘJA | 31.2 | °C/W | High k PCB | 61 | ||
| Junction-to-package top (RHB) | Psi JT | 0.2 | °C/W | 61 | |||
| Junction-to-board (RHB) | Psi JB | 11.2 | °C/W | 61 |
CAD (KiCad official)
- Symbol:
F2800156QRHBRQ1 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
f2800156qrhbrq1-etched.step/f2800156qrhbrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);f2800156qrhbrq1.step/f2800156qrhbrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (252 pp, sha256
e5e9c14e326ac962, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# F2800156QRHBRQ1
**Texas Instruments** · IC · VQFN-32(5x5)
F2800156QRHBRQ1 from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | XRSn | bidirectional | Device reset pin with an always-active internal pullup; its description row is not in the supplied pages. |
| 2 | A6,C6,GPIO226,GPIO228 | bidirectional | Bonded pin combining ADC inputs A6 and C6 with GPIO226 and GPIO228; if both GPIOs are outputs, GPIO226 automatically changes to an input to prevent contention. |
| 3 | A3/C5,GPIO242 | bidirectional | ADC-A input 3 and ADC-C input 5 (with CMPSS-3 inputs), shared with GPIO242 which has full digital input/output. |
| 4 | A2/C9,GPIO224 | bidirectional | ADC-A input 2 and ADC-C input 9 (with CMPSS-1 inputs), shared with GPIO224 which has full digital input/output. |
| 5 | A15/C7,C4/A14 | input | Bonded analog pin combining ADC inputs A15, C7, C4 and A14 (A15/C7 AIO233, A14/C4 AIO239). |
| 6 | A11/C0,A5/C2 | input | Bonded analog pin combining ADC inputs A11, C0, A5 and C2 (digital input AIO237/AIO244). |
| 7 | A0/C15/CMP1_DACL,A1 | input | Bonded analog pin combining ADC inputs A0, C15 and A1 with the CMPSS-1 low DAC output (digital input AIO231/AIO232). |
| 8 | A12/C1,A7/C3 | input | Bonded analog pin combining ADC inputs A12, C1, A7 and C3 (digital input AIO238/AIO245). |
| 9 | A8/C11 | input | ADC-A input 8 and ADC-C input 11 (digital input AIO241). |
| 10 | VSSA | power_in | Analog ground; tie to VSS if no separate analog ground is used, and on this package VREFLO is internally tied to it. |
| 11 | VDDA | power_in | 3.3-V analog power pin needing a minimum 2.2-uF decoupling capacitor; VREFHI is internally tied to VDDA on this package. |
| 12 | A4/C14 | input | ADC-A input 4 and ADC-C input 14 with CMPSS-2/4 inputs (digital input AIO225). |
| 13 | A10/C10,C8/A9,GPIO227,GPIO230 | bidirectional | Bonded pin combining ADC inputs A10, C10, C8, A9 with GPIO227 and GPIO230; if both GPIOs are outputs, GPIO227 automatically changes to an input to prevent contention. |
| 14 | GPIO11 | bidirectional | General-purpose input/output 11 with muxed ePWM6_B, CANA_RX, SCIB_RX, SPIA and eQEP functions. |
| 15 | GPIO24 | bidirectional | General-purpose input/output 24 with muxed OUTPUTXBAR1, SPIA_STE, EPWM4_A and ERRORSTS (requires external pulldown) functions. |
| 16 | TCK | input | JTAG test clock input with an always-active internal pullup; use a pullup resistor or leave unconnected if unused. |
| 17 | GPIO37/TDO | bidirectional | JTAG TDO by default (tri-stated when no JTAG activity); enable internal pullup or add an external pullup to avoid a floating input. |
| 18 | TMS | input | JTAG test mode select input with an always-active internal pullup; use a pullup resistor if unused. |
| 19 | GPIO35/TDI | bidirectional | JTAG TDI by default with internal pullup disabled; enable the internal pullup or add an external pullup to avoid a floating input. |
| 20 | GPIO32 | bidirectional | General-purpose input/output 32 (digital mux pin). |
| 21 | GPIO18/X2 | bidirectional | GPIO18 or crystal oscillator output X2; also SPIA_CLK, XCLKOUT and other mux functions. |
| 22 | GPIO19/X1 | bidirectional | GPIO19 or crystal oscillator input X1 / single-ended 3.3-V clock input; also ExtR external resistor for the internal oscillator. |
| 23 | VDDIO | power_in | 3.3-V digital I/O power pin; all VDDIO pins must be connected. |
| 24 | VDD | power_in | 1.2-V digital logic power pin; must be connected and not used to bias external circuits. |
| 25 | VREGENZ | input | Internal voltage regulator enable with internal pulldown; tie low to VSS to enable internal VREG, or high to VDDIO to use an external supply. |
| 26 | GPIO3 | bidirectional | General-purpose input/output 3; located near the PMM, so avoid negative noise below VSS - 0.3 V. |
| 27 | GPIO1 | bidirectional | General-purpose input/output 1; located near the PMM, so avoid negative noise below VSS - 0.3 V. |
| 28 | GPIO0 | bidirectional | General-purpose input/output 0; located near the PMM, so avoid negative noise below VSS - 0.3 V. |
| 29 | GPIO7 | bidirectional | General-purpose input/output 7 (digital mux pin). |
| 30 | GPIO5 | bidirectional | General-purpose input/output 5 (digital mux pin). |
| 31 | GPIO29 | bidirectional | General-purpose input/output 29 (digital mux pin). |
| 32 | A16/C16,GPIO28 | bidirectional | ADC-A input 16 and ADC-C input 16, shared with GPIO28 which has full digital input/output. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD with respect to VSS | VDD | -0.3 | | 1.5 | V | | 47 |
| Supply voltage VDDIO with respect to VSS | VDDIO | -0.3 | | 4.6 | V | | 47 |
| Supply voltage VDDA with respect to VSSA | VDDA | -0.3 | | 4.6 | V | | 47 |
| Input voltage | VIN | -0.3 | | 4.6 | V | 3.3 V | 47 |
| Output voltage | VO | -0.3 | | 4.6 | V | | 47 |
| Input clamp current per pin | IIK | -20 | | 20 | mA | VIN < VSS/VSSA or VIN > VDDIO/VDDA | 47 |
| Input clamp current total for all pins | IIKTOTAL | -20 | | 20 | mA | VIN < VSS/VSSA or VIN > VDDIO/VDDA | 47 |
| Digital output current per pin | IOUT | -20 | | 20 | mA | | 47 |
| Operating junction temperature | TJ | -40 | | 155 | °C | | 47 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 47 |
| Device supply voltage VDDIO and VDDA, internal BOR disabled | VDDIO, VDDA | 2.8 | 3.3 | 3.63 | V | Internal BOR disabled | 48 |
| Device supply voltage VDDIO and VDDA, internal BOR enabled | VDDIO, VDDA | | 3.3 | 3.63 | V | Internal BOR enabled; min is VBOR-VDDIO(MAX) + VBOR-GB | 48 |
| Device supply voltage VDD | VDD | 1.14 | 1.2 | 1.32 | V | | 48 |
| Digital input voltage | VIN | -0.3 | | | V | VSS, 0.3 to VDDIO + 0.3 | 48 |
| Analog input voltage | VIN | -0.3 | | | V | VSSA, 0.3 to VDDA + 0.3 | 48 |
| Junction temperature | TJ | -40 | | 140 | °C | F280015xS, F280015xQ parts | 48 |
| Free-air temperature | TA | -40 | | 125 | °C | F280015xS, F280015xQ parts | 48 |
| High-level output impedance | ROH | 50 | 65 | 96 | Ω | VOH=VDDS-0.4V | 59 |
| Low-level output impedance | ROL | 48 | 60 | 84 | Ω | VOL=0.4V | 59 |
| Weak pulldown resistance | RPULLDOWN | 22.66 | 31.49 | 61.55 | kΩ | | 59 |
| Weak pullup resistance | RPULLUP | 19.89 | 29.45 | 53.63 | kΩ | | 59 |
| High-level output source current for all output pins | IOH | -4 | | | mA | | 59 |
| Low-level output sink current for all output pins | IOL | | | 4 | mA | | 59 |
| High-level input voltage | VIH | 2 | | | V | | 59 |
| Low-level input voltage | VIL | | | 0.8 | V | | 59 |
| Low-level output voltage | VOL | | | 0.4 | V | IOL = IOL MAX | 59 |
| Low-level output voltage | VOL | | | 0.2 | V | IOL = 100 µA | 59 |
| Pulldown input current | IPULLDOWN | | | 120 | µA | VDDIO = 3.3 V, VIN = VDDIO | 59 |
| Pullup input current | IPULLUP | | | 160 | µA | VDDIO = 3.3 V, VIN = 0 V | 59 |
| Pin leakage digital inputs | ILEAK | | | 0.1 | µA | Pullups and outputs disabled, 0 V ≤ VIN ≤ VDDIO | 59 |
| Pin leakage analog pins | ILEAK | | | 0.1 | µA | Analog drivers disabled, 0 V ≤ VIN ≤ VDDA | 59 |
| Internal voltage regulator output | VVREG | 1.152 | 1.2 | 1.248 | V | | 71 |
| VDDIO brown out reset voltage on ramp down | VBOR-VDDIO-DOWN | 2.81 | | 3 | V | After XRSn release | 71 |
| Internal voltage regulator inrush current | VVREG-INRUSH | | | 650 | mA | | 71 |
| Supply ramp rate of 3.3V rails | SRVDD33 | 20 | | 100 | mV/us | VDDIO, VDDA | 71 |
| Total VDD capacitance, internal VREG | CVDD TOTAL | 10 | | 22 | uF | Internal VREG | 71 |
| System clock frequency | f(SYSCLK) | 2 | | 120 | MHz | | 80 |
| Junction-to-case thermal resistance, top (RHB) | RΘJC | | 20.7 | | °C/W | | 61 |
| Junction-to-case thermal resistance, bottom (RHB) | RΘJC | | 2.3 | | °C/W | | 61 |
| Junction-to-board thermal resistance (RHB) | RΘJB | | 11.3 | | °C/W | | 61 |
| Junction-to-free air thermal resistance (RHB) | RΘJA | | 31.2 | | °C/W | High k PCB | 61 |
| Junction-to-package top (RHB) | Psi JT | | 0.2 | | °C/W | | 61 |
| Junction-to-board (RHB) | Psi JB | | 11.2 | | °C/W | | 61 |
## CAD (KiCad official)
- Symbol: `F2800156QRHBRQ1`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files: `f2800156qrhbrq1-etched.step` / `f2800156qrhbrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `f2800156qrhbrq1.step` / `f2800156qrhbrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tms320f2800154-q1.pdf?ts=1701298430020) (252 pp, sha256 `e5e9c14e326ac962`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/f2800156qrhbrq1-datasheet.pdf)