F2800154QRHBRQ1

{
  "slug": "f2800154qrhbrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "TEXAS INSTRUMENTS Global Sourcing Parts, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "f2800154qrhbrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "f2800154qrhbrq1.kicad_sym",
    "f2800154qrhbrq1.kicad_mod",
    "f2800154qrhbrq1.glb",
    "f2800154qrhbrq1.step",
    "f2800154qrhbrq1.lbr",
    "docs/hero.png",
    "docs/f2800154qrhbrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "f2800154qrhbrq1-hero.glb",
    "f2800154qrhbrq1-hero.overlay.json",
    "f2800154qrhbrq1-etched.glb"
  ],
  "component": {
    "mpn": "F2800154QRHBRQ1",
    "manufacturer": "TEXAS INSTRUMENTS",
    "package": "VQFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tms320f2800154-q1.pdf?ts=1701298430020",
    "parts": {
      "symbol": "f2800154qrhbrq1.kicad_sym",
      "footprint": "f2800154qrhbrq1.kicad_mod",
      "model_3d": "f2800154qrhbrq1-hero.glb",
      "model_3d_plain": "f2800154qrhbrq1-etched.glb",
      "model_3d_step": "f2800154qrhbrq1-etched.step",
      "model_3d_step_plain": "f2800154qrhbrq1.step",
      "lbr": "f2800154qrhbrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C22460856",
      "digikey": "296-F2800154QRHBRQ1TR-ND",
      "mouser": "595-F2800154QRHBRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T03:39:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-F2800154QRHBRQ1TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-F2800154QRHBRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "XRSn",
        "type": "bidirectional",
        "description": "Active-low device reset; the internal pullup is always active."
      },
      {
        "number": "2",
        "name": "A6,C6,GPIO226,GPIO228",
        "type": "bidirectional",
        "description": "ADC-A input 6 / ADC-C input 6 shared with GPIO226 and GPIO228; if both GPIOs are configured as outputs, GPIO226 automatically changes to an input to prevent contention on this pin."
      },
      {
        "number": "3",
        "name": "A3/C5,GPIO242",
        "type": "bidirectional",
        "description": "ADC-A input 3 / ADC-C input 5 shared with GPIO242, a general-purpose input/output."
      },
      {
        "number": "4",
        "name": "A2/C9,GPIO224",
        "type": "bidirectional",
        "description": "ADC-A input 2 / ADC-C input 9 shared with GPIO224, a general-purpose input/output."
      },
      {
        "number": "5",
        "name": "A15/C7,C4/A14",
        "type": "input",
        "description": "Analog input shared between ADC-A/ADC-C channels 15 and 7 and channels 4 and 14 (multiple analog channels bonded to this pin)."
      },
      {
        "number": "6",
        "name": "A11/C0,A5/C2",
        "type": "input",
        "description": "Analog input shared between ADC-A channel 11 / ADC-C channel 0 and ADC-A channel 5 / ADC-C channel 2."
      },
      {
        "number": "7",
        "name": "A0/C15/CMP1_DACL,A1",
        "type": "input",
        "description": "Analog input shared between ADC-A channels 0 and 1, ADC-C channel 15 and the CMPSS-1 low DAC output CMP1_DACL."
      },
      {
        "number": "8",
        "name": "A12/C1,A7/C3",
        "type": "input",
        "description": "Analog input shared between ADC-A channels 12 and 7 and ADC-C channels 1 and 3."
      },
      {
        "number": "9",
        "name": "A8/C11",
        "type": "input",
        "description": "Analog input shared between ADC-A channel 8 and ADC-C channel 11."
      },
      {
        "number": "10",
        "name": "VSSA",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "11",
        "name": "VDDA",
        "type": "power_in",
        "description": "3.3-V analog power pin; on the 32-pin QFN package VREFHI is internally tied to VDDA."
      },
      {
        "number": "12",
        "name": "A4/C14",
        "type": "input",
        "description": "Analog input shared between ADC-A channel 4 and ADC-C channel 14."
      },
      {
        "number": "13",
        "name": "A10/C10,C8/A9,GPIO227,GPIO230",
        "type": "bidirectional",
        "description": "Analog input shared between ADC-A channel 10 / ADC-C channel 10 and ADC-C channel 8 / ADC-A channel 9, multiplexed with GPIO227 and GPIO230; if both GPIO227 and GPIO230 are configured as outputs, GPIO227 automatically changes to an input."
      },
      {
        "number": "14",
        "name": "GPIO11",
        "type": "bidirectional",
        "description": "General-purpose input/output 11 with multiplexed peripheral functions per the pin attribute table; internal pullup disabled by default."
      },
      {
        "number": "15",
        "name": "GPIO24",
        "type": "bidirectional",
        "description": "General-purpose input/output 24 with multiplexed peripheral functions per the pin attribute table; internal pullup disabled by default."
      },
      {
        "number": "16",
        "name": "TCK",
        "type": "input",
        "description": "JTAG test clock input; the internal pullup is active."
      },
      {
        "number": "17",
        "name": "GPIO37/TDO",
        "type": "bidirectional",
        "description": "JTAG test data output (TDO) by default; the pin is tri-stated when there is no JTAG activity and can otherwise be used as GPIO37."
      },
      {
        "number": "18",
        "name": "TMS",
        "type": "input",
        "description": "JTAG test mode select; the internal pullup is active and a pullup resistor is recommended."
      },
      {
        "number": "19",
        "name": "GPIO35/TDI",
        "type": "bidirectional",
        "description": "JTAG test data input (TDI) by default; the internal pullup is disabled by default and should be enabled or externally pulled up if used as TDI."
      },
      {
        "number": "20",
        "name": "GPIO32",
        "type": "bidirectional",
        "description": "General-purpose input/output 32 with multiplexed peripheral functions per the digital signals table."
      },
      {
        "number": "21",
        "name": "GPIO18/X2",
        "type": "bidirectional",
        "description": "General-purpose input/output 18, or crystal oscillator output X2 when the crystal oscillator is used."
      },
      {
        "number": "22",
        "name": "GPIO19/X1",
        "type": "bidirectional",
        "description": "General-purpose input/output 19, or crystal oscillator / single-ended clock input X1; the initialization software must configure this pin before the crystal oscillator is enabled."
      },
      {
        "number": "23",
        "name": "VDDIO",
        "type": "power_in",
        "description": "3.3-V digital I/O power pin."
      },
      {
        "number": "24",
        "name": "VDD",
        "type": "power_in",
        "description": "1.2-V digital logic power pin."
      },
      {
        "number": "25",
        "name": "VREGENZ",
        "type": "input",
        "description": "Internal voltage regulator enable with internal pulldown; tie low to VSS to enable the internal VREG, or tie high to VDDIO to use an external supply."
      },
      {
        "number": "26",
        "name": "GPIO3",
        "type": "bidirectional",
        "description": "General-purpose input/output 3 with multiplexed peripheral functions per the digital signals table."
      },
      {
        "number": "27",
        "name": "GPIO1",
        "type": "bidirectional",
        "description": "General-purpose input/output 1 with multiplexed peripheral functions per the digital signals table."
      },
      {
        "number": "28",
        "name": "GPIO0",
        "type": "bidirectional",
        "description": "General-purpose input/output 0 with multiplexed peripheral functions per the digital signals table."
      },
      {
        "number": "29",
        "name": "GPIO7",
        "type": "bidirectional",
        "description": "General-purpose input/output 7 with multiplexed peripheral functions per the digital signals table."
      },
      {
        "number": "30",
        "name": "GPIO5",
        "type": "bidirectional",
        "description": "General-purpose input/output 5 with multiplexed peripheral functions per the digital signals table."
      },
      {
        "number": "31",
        "name": "GPIO29",
        "type": "bidirectional",
        "description": "General-purpose input/output 29 with multiplexed peripheral functions per the digital signals table."
      },
      {
        "number": "32",
        "name": "A16/C16,GPIO28",
        "type": "bidirectional",
        "description": "ADC-A input 16 / ADC-C input 16 shared with GPIO28, a general-purpose input/output."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 1 XRSn: the pin type (bidirectional) is inferred; the provided text does not give an I/O type fo; The VSS exposed thermal pad (PAD) on the 32-pin RHB package has no numbered pin and is not listed as; Figure 5-4 shows only the primary GPIO/analog names on the RHB pins. Full mux functions for each GPI",
          "exposed pad 33 added from the footprint",
          "1/33 pins cited to the wrong page (name found elsewhere): ['18:TMS@p45']"
        ],
        "pages_sent": 54,
        "cost_usd": 0.3298,
        "at": "2026-10-29T03:38:45"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tms320f2800154-q1.pdf?ts=1701298430020",
        "pages": 252,
        "sha256": "e5e9c14e326ac962",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "f2800154qrhbrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "f2800154qrhbrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "327fe2ad42dd3fc275082940592d5e8229d6c7c675ce082377c104ad8d405baf",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "RHB0032U",
      "source_page": 246,
      "D": {
        "nom_mm": 5.0,
        "range_mm": [
          4.9,
          5.1
        ]
      },
      "E1": {
        "nom_mm": 5.0,
        "range_mm": [
          4.9,
          5.1
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.0,
        "range_mm": [
          null,
          1.0
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "f2800154qrhbrq1.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}