component
F1956NBGI8
Public Made by Adomby adom
RENESAS RF attenuator, QFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
4ace3c4
F1956NBGI8
RENESAS · RF attenuator · QFN-32-EP(5x5)
F1956NBGI8 from RENESAS, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | This pin must be left open. |
| 2 | VDD | power_in | Main supply, use 3.3V or 5V, with recommended operating range 3.00 V to 5.25 V; bypass capacitor as close to the pin as possible. |
| 3 | VMODE | input | Logic low selects parallel mode; logic high or floating (NC) selects serial mode. |
| 4 | A0 | input | Address bit A0 connection for serial address matching; internally pulled down to GND through 100kΩ when left open. |
| 5 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via; this pin is not internally connected. |
| 6 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 7 | RF1 | bidirectional | Device RF input or output (bi-directional); AC couple to this pin unless 0V DC. |
| 8 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 9 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 10 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 11 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 12 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 13 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 14 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 15 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 16 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 17 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 18 | RF2 | bidirectional | Device RF input or output (bi-directional); AC couple to this pin unless 0V DC. |
| 19 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 20 | NC | unconnected | No internal connection; can be left unconnected, have voltage applied, or be connected to ground (recommended). |
| 21 | A2 | input | Address bit A2 connection for serial address matching; internally pulled down to GND through 100kΩ when left open. |
| 22 | A1 | input | Address bit A1 connection for serial address matching; internally pulled down to GND through 100kΩ when left open. |
| 23 | LE | input | Serial interface latch enable input; internally pulled up to a regulated 2.5V when left open. |
| 24 | CLK | input | Serial interface clock input; serial clock speed is specified up to 25 MHz. |
| 25 | DATA | input | Serial interface data input; internally pulled up to a regulated 2.5V when left open. |
| 26 | D6 | input | Parallel control bit for 16dB attenuation; ground the pin if not used. |
| 27 | D5 | input | Parallel control bit for 8dB attenuation; ground the pin if not used. |
| 28 | D4 | input | Parallel control bit for 4dB attenuation; ground the pin if not used. |
| 29 | D3 | input | Parallel control bit for 2dB attenuation; ground the pin if not used. |
| 30 | D2 | input | Parallel control bit for 1dB attenuation; ground the pin if not used. |
| 31 | D1 | input | Parallel control bit for 0.5dB attenuation; ground the pin if not used. |
| 32 | D0 | input | Parallel control bit for 0.25dB attenuation; ground the pin if not used. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | QFN-32-EP(5x5) |
| Category | RF & Radio |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD to GND | VDD | -0.3 | 5.5 | V | 2 | ||
| Control input voltage (D[6:0], DATA, CLK, LE, A0, A1, A2, VMODE) | VCNTL | -0.3 | V | 2 | |||
| RF1, RF2 voltage | VRF | -0.3 | 0.3 | V | 2 | ||
| Maximum input power applied to RF1 or RF2 | PRF | 34 | dBm | >100 MHz | 2 | ||
| Operating case temperature | 105 | °C | 2 | ||||
| Continuous power dissipation | 1.5 | W | 2 | ||||
| Maximum junction temperature | TJmax | 150 | °C | 2 | |||
| Storage temperature range | TST | -65 | 150 | °C | 2 | ||
| Lead temperature | TLEAD | 260 | °C | soldering, 10s | 2 | ||
| Electrostatic discharge HBM | VESDHBM | 1500 | V | JEDEC/ESDA JS-001-2012 (Class 1C) | 2 | ||
| ESD voltage CDM | VESDCDM | 500 | V | Per JESD22-C101F (Class C2) | 2 | ||
| Supply voltage | VDD | 3 | 5.25 | V | 3 | ||
| Operating temperature range | TCASE | -40 | 105 | °C | Case temperature | 3 | |
| Frequency range | FRF | 1 | 6000 | MHz | 3 | ||
| Junction to ambient thermal resistance | θJA | 40 | °C/W | 2 | |||
| Junction to case thermal resistance | θJC | 4 | °C/W | Case is defined as the exposed paddle | 2 | ||
| Logic input high | VIH | 1.172 | V | 3.0V ≤ VDD ≤ 3.6V; CLK, LE, DATA, D[6:0], A0, A1, A2, VMODE | 4 | ||
| Logic input high | VIH | 1.171 | 3.6 | V | 3.6V < VDD | 4 | |
| Logic input low | VIL | 0.63 | V | CLK, LE, DATA, D[6:0], A0, A1, A2, VMODE | 4 | ||
| Logic current | IIH, IIL | -40 | 20 | μA | Individual pins | 4 | |
| Supply current | IDD | 350 | 800 | μA | 4 | ||
| Attenuation range | ATTRNG | 31.75 | dB | No missing codes | 4 | ||
| Minimum gain step LSB | LSB | 0.25 | dB | FRF ≤ 4.5GHz | 4 | ||
| Minimum gain step LSB | LSB | 0.5 | dB | FRF ≤ 6.5GHz | 4 | ||
| Minimum gain step LSB | LSB | 1 | dB | FRF ≤ 8.5GHz | 4 | ||
| DSA settling time | τSET | 0.9 | µs | Max to min attenuation to settle to within 0.5dB of final value | 4 | ||
| DSA settling time | τSET | 1.8 | µs | Min to max attenuation to settle to within 0.5dB of final value | 4 | ||
| Video feedthrough RF1, RF2 ports | VIDFT | 10 | mVpp | Measured at RF ports with 2.5ns rise time, 0 to 3.3V control pulse | 4 | ||
| Maximum spurious level on any RF port | SpurMAX | -140 | dBm | Spur Freq ~ 2.2MHz | 4 | ||
| Serial clock speed | FCLK | 25 | MHz | SPI 3 wire bus | 4 | ||
| Parallel to serial setup | A | 100 | ns | SPI 3 wire bus | 4 | ||
| Serial data hold time | B | 10 | ns | SPI 3 wire bus | 4 | ||
| LE delay | C | 10 | ns | SPI 3 wire bus; time from final serial clock rising edge | 4 | ||
| Maximum switching rate | SWRATE | 25 | kHz | 4 | |||
| Insertion loss | IL | 1.3 | 1.8 | dB | 1MHz < FRF ≤ 2GHz | 5 | |
| Insertion loss | IL | 1.3 | 1.9 | dB | 2GHz < FRF ≤ 3GHz | 5 | |
| Insertion loss | IL | 1.6 | 2.2 | dB | 3GHz < FRF ≤ 4GHz | 5 | |
| Insertion loss | IL | 2.1 | 2.6 | dB | 4GHz < FRF ≤ 5GHz | 5 | |
| Insertion loss | IL | 2.6 | 3 | dB | 5GHz < FRF ≤ 6GHz | 5 | |
| Relative phase (Amin vs. Amax) | ΦΔ | 12 | deg | FRF = 1GHz | 5 | ||
| Relative phase (Amin vs. Amax) | ΦΔ | 25 | deg | FRF = 2GHz | 5 | ||
| Relative phase (Amin vs. Amax) | ΦΔ | 55 | deg | FRF = 4GHz | 5 | ||
| Relative phase (Amin vs. Amax) | ΦΔ | 90 | deg | FRF = 6GHz | 5 | ||
| Step error (differential non-linearity) | DNL | 0.1 | 0.19 | dB | Max error between adjacent steps | 5 | |
| Absolute attenuation error (integral non-linearity) | INL | -0.4 | 0.1 | 0.5 | dB | Max error for state 19.75dB, FRF = 2GHz | 5 |
| Absolute attenuation error (integral non-linearity) | INL | -0.8 | 0.5 | dB | Max error, over all states, FRF = 2GHz | 5 | |
| Input return loss | S11 | 15 | 20 | dB | 1MHz < FRF ≤ 2GHz | 5 | |
| Input return loss | S11 | 7 | 14 | dB | 4GHz < FRF ≤ 6GHz | 5 | |
| Output return loss | S22 | 14 | 18 | dB | 1MHz < FRF ≤ 2GHz | 5 | |
| Output return loss | S22 | 12 | 16 | dB | 2GHz < FRF ≤ 4GHz | 5 | |
| Output return loss | S22 | 7 | 11 | dB | 4GHz < FRF ≤ 6GHz | 5 | |
| Input IP3 | IIP3 | 64 | dBm | PIN = +10dBm per tone, 50MHz tone separation, Attn = 0.00dB | 5 | ||
| Input IP3 | IIP3 | 60 | 63.4 | dBm | PIN = +22dBm per tone, 1MHz tone separation, Attn = 0.00dB, FRF = 0.7GHz | 5 | |
| Input IP3 | IIP3 | 60 | 64.1 | dBm | PIN = +22dBm per tone, 1MHz tone separation, Attn = 0.00dB, FRF = 2.2GHz | 5 | |
| Input IP3 | IIP3 | 60 | 63.3 | dBm | PIN = +22dBm per tone, 1MHz tone separation, Attn = 0.00dB, FRF = 2.6GHz | 5 | |
| Input 0.1dB compression | P0.1dB | 34.5 | dBm | FRF = 2GHz, Attn = 10dB | 5 |
CAD (KiCad official)
- Symbol:
F1956NBGI8 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
f1956nbgi8-etched.step/f1956nbgi8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);f1956nbgi8.step/f1956nbgi8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (25 pp, sha256
4286c5ab6e6a089b, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# F1956NBGI8
**RENESAS** · RF attenuator · QFN-32-EP(5x5)
F1956NBGI8 from RENESAS, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | This pin must be left open. |
| 2 | VDD | power_in | Main supply, use 3.3V or 5V, with recommended operating range 3.00 V to 5.25 V; bypass capacitor as close to the pin as possible. |
| 3 | VMODE | input | Logic low selects parallel mode; logic high or floating (NC) selects serial mode. |
| 4 | A0 | input | Address bit A0 connection for serial address matching; internally pulled down to GND through 100kΩ when left open. |
| 5 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via; this pin is not internally connected. |
| 6 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 7 | RF1 | bidirectional | Device RF input or output (bi-directional); AC couple to this pin unless 0V DC. |
| 8 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 9 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 10 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 11 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 12 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 13 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 14 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 15 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 16 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 17 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 18 | RF2 | bidirectional | Device RF input or output (bi-directional); AC couple to this pin unless 0V DC. |
| 19 | GND | power_in | Connect directly to paddle ground or as close as possible with a thru via. |
| 20 | NC | unconnected | No internal connection; can be left unconnected, have voltage applied, or be connected to ground (recommended). |
| 21 | A2 | input | Address bit A2 connection for serial address matching; internally pulled down to GND through 100kΩ when left open. |
| 22 | A1 | input | Address bit A1 connection for serial address matching; internally pulled down to GND through 100kΩ when left open. |
| 23 | LE | input | Serial interface latch enable input; internally pulled up to a regulated 2.5V when left open. |
| 24 | CLK | input | Serial interface clock input; serial clock speed is specified up to 25 MHz. |
| 25 | DATA | input | Serial interface data input; internally pulled up to a regulated 2.5V when left open. |
| 26 | D6 | input | Parallel control bit for 16dB attenuation; ground the pin if not used. |
| 27 | D5 | input | Parallel control bit for 8dB attenuation; ground the pin if not used. |
| 28 | D4 | input | Parallel control bit for 4dB attenuation; ground the pin if not used. |
| 29 | D3 | input | Parallel control bit for 2dB attenuation; ground the pin if not used. |
| 30 | D2 | input | Parallel control bit for 1dB attenuation; ground the pin if not used. |
| 31 | D1 | input | Parallel control bit for 0.5dB attenuation; ground the pin if not used. |
| 32 | D0 | input | Parallel control bit for 0.25dB attenuation; ground the pin if not used. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | QFN-32-EP(5x5) |
| Category | RF & Radio |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD to GND | VDD | -0.3 | | 5.5 | V | | 2 |
| Control input voltage (D[6:0], DATA, CLK, LE, A0, A1, A2, VMODE) | VCNTL | -0.3 | | | V | | 2 |
| RF1, RF2 voltage | VRF | -0.3 | | 0.3 | V | | 2 |
| Maximum input power applied to RF1 or RF2 | PRF | | | 34 | dBm | >100 MHz | 2 |
| Operating case temperature | | | | 105 | °C | | 2 |
| Continuous power dissipation | | | | 1.5 | W | | 2 |
| Maximum junction temperature | TJmax | | | 150 | °C | | 2 |
| Storage temperature range | TST | -65 | | 150 | °C | | 2 |
| Lead temperature | TLEAD | | | 260 | °C | soldering, 10s | 2 |
| Electrostatic discharge HBM | VESDHBM | | | 1500 | V | JEDEC/ESDA JS-001-2012 (Class 1C) | 2 |
| ESD voltage CDM | VESDCDM | | | 500 | V | Per JESD22-C101F (Class C2) | 2 |
| Supply voltage | VDD | 3 | | 5.25 | V | | 3 |
| Operating temperature range | TCASE | -40 | | 105 | °C | Case temperature | 3 |
| Frequency range | FRF | 1 | | 6000 | MHz | | 3 |
| Junction to ambient thermal resistance | θJA | | 40 | | °C/W | | 2 |
| Junction to case thermal resistance | θJC | | 4 | | °C/W | Case is defined as the exposed paddle | 2 |
| Logic input high | VIH | 1.172 | | | V | 3.0V ≤ VDD ≤ 3.6V; CLK, LE, DATA, D[6:0], A0, A1, A2, VMODE | 4 |
| Logic input high | VIH | 1.171 | | 3.6 | V | 3.6V < VDD | 4 |
| Logic input low | VIL | | | 0.63 | V | CLK, LE, DATA, D[6:0], A0, A1, A2, VMODE | 4 |
| Logic current | IIH, IIL | -40 | | 20 | μA | Individual pins | 4 |
| Supply current | IDD | | 350 | 800 | μA | | 4 |
| Attenuation range | ATTRNG | | 31.75 | | dB | No missing codes | 4 |
| Minimum gain step LSB | LSB | | 0.25 | | dB | FRF ≤ 4.5GHz | 4 |
| Minimum gain step LSB | LSB | | 0.5 | | dB | FRF ≤ 6.5GHz | 4 |
| Minimum gain step LSB | LSB | | 1 | | dB | FRF ≤ 8.5GHz | 4 |
| DSA settling time | τSET | | 0.9 | | µs | Max to min attenuation to settle to within 0.5dB of final value | 4 |
| DSA settling time | τSET | | 1.8 | | µs | Min to max attenuation to settle to within 0.5dB of final value | 4 |
| Video feedthrough RF1, RF2 ports | VIDFT | | 10 | | mVpp | Measured at RF ports with 2.5ns rise time, 0 to 3.3V control pulse | 4 |
| Maximum spurious level on any RF port | SpurMAX | | -140 | | dBm | Spur Freq ~ 2.2MHz | 4 |
| Serial clock speed | FCLK | | 25 | | MHz | SPI 3 wire bus | 4 |
| Parallel to serial setup | A | | 100 | | ns | SPI 3 wire bus | 4 |
| Serial data hold time | B | | 10 | | ns | SPI 3 wire bus | 4 |
| LE delay | C | | 10 | | ns | SPI 3 wire bus; time from final serial clock rising edge | 4 |
| Maximum switching rate | SWRATE | | 25 | | kHz | | 4 |
| Insertion loss | IL | | 1.3 | 1.8 | dB | 1MHz < FRF ≤ 2GHz | 5 |
| Insertion loss | IL | | 1.3 | 1.9 | dB | 2GHz < FRF ≤ 3GHz | 5 |
| Insertion loss | IL | | 1.6 | 2.2 | dB | 3GHz < FRF ≤ 4GHz | 5 |
| Insertion loss | IL | | 2.1 | 2.6 | dB | 4GHz < FRF ≤ 5GHz | 5 |
| Insertion loss | IL | | 2.6 | 3 | dB | 5GHz < FRF ≤ 6GHz | 5 |
| Relative phase (Amin vs. Amax) | ΦΔ | | 12 | | deg | FRF = 1GHz | 5 |
| Relative phase (Amin vs. Amax) | ΦΔ | | 25 | | deg | FRF = 2GHz | 5 |
| Relative phase (Amin vs. Amax) | ΦΔ | | 55 | | deg | FRF = 4GHz | 5 |
| Relative phase (Amin vs. Amax) | ΦΔ | | 90 | | deg | FRF = 6GHz | 5 |
| Step error (differential non-linearity) | DNL | | 0.1 | 0.19 | dB | Max error between adjacent steps | 5 |
| Absolute attenuation error (integral non-linearity) | INL | -0.4 | 0.1 | 0.5 | dB | Max error for state 19.75dB, FRF = 2GHz | 5 |
| Absolute attenuation error (integral non-linearity) | INL | -0.8 | | 0.5 | dB | Max error, over all states, FRF = 2GHz | 5 |
| Input return loss | S11 | 15 | 20 | | dB | 1MHz < FRF ≤ 2GHz | 5 |
| Input return loss | S11 | 7 | 14 | | dB | 4GHz < FRF ≤ 6GHz | 5 |
| Output return loss | S22 | 14 | 18 | | dB | 1MHz < FRF ≤ 2GHz | 5 |
| Output return loss | S22 | 12 | 16 | | dB | 2GHz < FRF ≤ 4GHz | 5 |
| Output return loss | S22 | 7 | 11 | | dB | 4GHz < FRF ≤ 6GHz | 5 |
| Input IP3 | IIP3 | 64 | | | dBm | PIN = +10dBm per tone, 50MHz tone separation, Attn = 0.00dB | 5 |
| Input IP3 | IIP3 | 60 | 63.4 | | dBm | PIN = +22dBm per tone, 1MHz tone separation, Attn = 0.00dB, FRF = 0.7GHz | 5 |
| Input IP3 | IIP3 | 60 | 64.1 | | dBm | PIN = +22dBm per tone, 1MHz tone separation, Attn = 0.00dB, FRF = 2.2GHz | 5 |
| Input IP3 | IIP3 | 60 | 63.3 | | dBm | PIN = +22dBm per tone, 1MHz tone separation, Attn = 0.00dB, FRF = 2.6GHz | 5 |
| Input 0.1dB compression | P0.1dB | | 34.5 | | dBm | FRF = 2GHz, Attn = 10dB | 5 |
## CAD (KiCad official)
- Symbol: `F1956NBGI8`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `f1956nbgi8-etched.step` / `f1956nbgi8-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `f1956nbgi8.step` / `f1956nbgi8.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/f1956nbgi8-datasheet.pdf) (25 pp, sha256 `4286c5ab6e6a089b`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/f1956nbgi8-datasheet.pdf)