main
History Download
Ray eup3482adir1: laser-etched CAD + chip hero (factory 2.0.0 backfill) a401334

EUP3482ADIR1

Eutech Microelectronics · DC-DC Converters · SOP-8

EUP3482ADIR1 from Eutech Microelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input supply pin. Operating range 4.5V to 30V (35V surge tolerant). Bypass locally to GND with a low-ESR ceramic capacitor (10µF in the typical application).
2 EN input Enable input. Logic high enables the regulator; logic low places the part in shutdown (draws ~1µA from IN). Can be tied to IN through a resistor divider to program input UVLO.
3 SS input Programmable soft-start pin. An external capacitor to GND (0.1µF typical, optional) sets the soft-start ramp time to limit inrush current and output overshoot at startup.
4 GND power_in Device ground. Provide a low-impedance return to the input and output capacitors.
5 COMP output Error-amplifier output / loop compensation node. Connect an external R-C (typ. 2.2kΩ + 3.3nF) to GND to compensate the current-mode control loop.
6 FB input Feedback input to the error amplifier. Internal reference ~0.923V; set output voltage with a resistor divider from VOUT to FB to GND (e.g. 26.1kΩ/10kΩ for 3.3V, 44.2kΩ/10kΩ for 5V).
7 SW output Switch node - the source of the internal high-side DMOS and drain of the internal low-side DMOS. Connect the external inductor (10µH typical) from SW to the output.
8 BS passive Bootstrap pin for the high-side gate drive. Connect a ceramic capacitor (10nF typical) from BS to SW; this capacitor is charged each cycle to provide the floating gate-drive supply for the internal high-side switch.

Key specifications

Parameter Value
Manufacturer Eutech Microelectronics
Package SOP-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • EUP3482ADIR1

CAD (KiCad official)

  • Symbol: EUP3482ADIR1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: eup3482adir1-etched.step / eup3482adir1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); eup3482adir1.step / eup3482adir1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Eutech Microelectronics datasheet (1 pp, sha256 bafe68605d55f7a3, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF