Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

EUP3271WIR1

Eutech Microelectronics · DC-DC Converters · SOP-8-EP

EUP3271WIR1 from Eutech Microelectronics, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply pin for the 4.5V to 36V input operating range.
2 GND power_in Ground reference for the device.
3 COMP passive Loop compensation pin; driving COMP logic low (below 0.14V rising-threshold level) turns off the converter.
4 FB input Output feedback input, with the output set by the 0.6V reference through the external resistor divider.
5 CS input Current sense input that sets the constant current value through resistor R3 to GND, with a CS reference of 60mV typical.
6 VDC power_out Internal VDC regulator output that must be bypassed to ground with a ceramic capacitor.
7 FREQ input Frequency select pin; the switching frequency is set by resistor R4 between FREQ and GND, and is 150kHz when R4=0Ω.
8 PGND power_in Power ground for the power switching stage.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Eutech Microelectronics
Package SOP-8-EP
Category Power Management ICs
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VIN 4.5 36 V 5
Operating Temperature Range -40 85 °C 5
Input Voltage VIN -0.3 40 V 5
Switch Voltage VSW -1 V max VIN +0.3V 5
CS Pin Voltage -0.3 13 V 5
All Other Pins Voltage -0.3 6 V 5
Junction Temperature 150 °C 5
Storage Temperature -65 150 °C 5
Lead Temperature (Soldering) 260 °C 10sec 5
Thermal Resistance junction-to-ambient θJA 60 °C/W SOP-8_EP 5
Input voltage 4.5 36 V 5
Input No Load Current 10 mA IOUT=0A 5
Quiescent Current 1 mA VFB=0.8V 5
Shutdown Current 380 µA VCOMP=0V 5
Input Under Voltage Lockout Threshold Rising 3.95 4.15 4.35 V Rising 5
Input Under Voltage Lockout Threshold Hysteresis 0.4 V 5
Current Limit 7.5 A 5
Operating frequency 135 150 165 kHz R4=0Ω 5
Operating frequency over junction temperature 127 173 kHz TJ = -25°C to 125°C 5
Maximum Duty Cycle 100 % 5
Minimum On-Time 150 ns 5
Reference Voltage of the Voltage Error Amplifier 0.591 0.6 0.609 V 5
CS Reference Voltage 57.4 60 62.6 mV 5
CS Reference Voltage over junction temperature 56.4 63.6 mV TJ = -25°C to 125°C 5
Transconductance of Error Amplifier 75 µA/V 5
Reference Voltage of the Short Circuit Foldback Comparator 0.24 V 5
COMP Enable Threshold Rising 0.14 V Rising 5
COMP Enable Threshold Hysteresis 40 mV 5
Thermal Shut-down Temperature Rising 150 °C Temperature Rising 5
Thermal Shut-down Temperature Falling 100 °C Temperature Falling 5
PMOS Drain-Source On-State Resistance 35 mΩ VIN=12V, IOUT=1A 5
PMOS Drain-Source On-State Resistance 44 mΩ VIN=5V, IOUT=1A 5
NMOS Drain-Source On-State Resistance 32 mΩ IOUT=1A 5

CAD (KiCad official)

  • Symbol: EUP3271WIR1
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: eup3271wir1-etched.step / eup3271wir1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); eup3271wir1.step / eup3271wir1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Eutech Microelectronics datasheet (9 pp, sha256 64f7968f3ca5f5c0, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed (audit)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF