main
Ray Publish 0.1.0 2bc6a41
{
  "slug": "eta9638e8a",
  "version": "0.1.0",
  "type": "component",
  "description": "ETA(钰泰) Battery Management, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "eta9638e8a",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "eta9638e8a.kicad_sym",
    "eta9638e8a.kicad_mod",
    "eta9638e8a.glb",
    "eta9638e8a.step",
    "eta9638e8a.lbr",
    "docs/hero.png",
    "docs/eta9638e8a-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "eta9638e8a-hero.glb",
    "eta9638e8a-hero.overlay.json",
    "eta9638e8a-etched.glb"
  ],
  "component": {
    "mpn": "ETA9638E8A",
    "manufacturer": "ETA(钰泰)",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604434023691268096",
    "parts": {
      "symbol": "eta9638e8a.kicad_sym",
      "footprint": "eta9638e8a.kicad_mod",
      "model_3d": "eta9638e8a-hero.glb",
      "model_3d_plain": "eta9638e8a-etched.glb",
      "model_3d_step": "eta9638e8a-etched.step",
      "model_3d_step_plain": "eta9638e8a.step",
      "lbr": "eta9638e8a.lbr"
    },
    "distributor_links": {
      "lcsc": "C42378388"
    },
    "distributor_check": {
      "checked_at": "2026-11-07T03:54:44Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ACIN",
        "type": "power_in",
        "description": "Charger input pin that connects to an AC adaptor or USB charger output; the absolute maximum ACIN voltage is 6.0V and the miniUSB input voltage range is 4.5V to 6.0V."
      },
      {
        "number": "2",
        "name": "BAT",
        "type": "power_in",
        "description": "Battery input pin that must be bypassed to GND with a 10uF or greater ceramic capacitor."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable pin for the IC: drive high to enable, low or floating to disable."
      },
      {
        "number": "4",
        "name": "SW",
        "type": "passive",
        "description": "Switching node of the switching regulator; connect a 1uH to 4.7uH inductor between SW and the positive terminal of the battery."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "Boost output pin that must be bypassed closely to ground with a 22uF or larger ceramic capacitor; the absolute maximum OUT voltage is 5.0V."
      },
      {
        "number": "6",
        "name": "GP",
        "type": "power_in",
        "description": "Power ground pin."
      },
      {
        "number": "7",
        "name": "STAT",
        "type": "output",
        "description": "Open-drain charge status output that goes low while the battery is charging and becomes high-impedance when the charge cycle completes."
      },
      {
        "number": "8",
        "name": "ISET",
        "type": "passive",
        "description": "Charge current set pin: connect a resistor Rset from ISET to GND, setting the fast charge current as Icharge = 1000/Rset (A)."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet lists the Exposed PAD as analog ground 'GA' in the pin description table but does not ; Page 2 pin-configuration diagram lists the names without pin numbers, and the pin table on page 3 is; The page 3 description specifies a 1uH to 4.7uH inductor, while the typical application shows 2.2uH;",
          "exposed pad 9 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 5,
        "cost_usd": 0.0487,
        "at": "2026-11-07T03:54:28"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604434023691268096",
        "pages": 5,
        "sha256": "26e3ae895e6b9d2d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "eta9638e8a.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",
        "checked": "2026-11-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "eta9638e8a-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2555d36ce85ddc77c1fc2f012a042f73beed62c408b168f601e684a0d2fa071f",
        "checked": "2026-11-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}